| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
9p/xen: fix release of IRQ
Kernel logs indicate an IRQ was double-freed.
Pass correct device ID during IRQ release.
[Dominique: remove confusing variable reset to 0] |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix soft lockups in fib6_select_path under high next hop churn
Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.
Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.
Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.
Kernel log:
0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb
1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3
2 [ffffbd13003e8e58] panic at ffffffff8cef65d4
3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03
4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f
5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756
6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af
7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d
-- <IRQ stack> --
8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb
[exception RIP: fib6_select_path+299]
RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287
RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000
RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618
RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200
R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830
R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c
10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c
11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5
12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47
13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0
14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274
15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474
16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615
17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec
18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3
19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9
20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice]
21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice]
22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice]
23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000
24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581
25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9
26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47
27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30
28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f
29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64
30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/pseries: Fix dtl_access_lock to be a rw_semaphore
The dtl_access_lock needs to be a rw_sempahore, a sleeping lock, because
the code calls kmalloc() while holding it, which can sleep:
# echo 1 > /proc/powerpc/vcpudispatch_stats
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:337
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 199, name: sh
preempt_count: 1, expected: 0
3 locks held by sh/199:
#0: c00000000a0743f8 (sb_writers#3){.+.+}-{0:0}, at: vfs_write+0x324/0x438
#1: c0000000028c7058 (dtl_enable_mutex){+.+.}-{3:3}, at: vcpudispatch_stats_write+0xd4/0x5f4
#2: c0000000028c70b8 (dtl_access_lock){+.+.}-{2:2}, at: vcpudispatch_stats_write+0x220/0x5f4
CPU: 0 PID: 199 Comm: sh Not tainted 6.10.0-rc4 #152
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
Call Trace:
dump_stack_lvl+0x130/0x148 (unreliable)
__might_resched+0x174/0x410
kmem_cache_alloc_noprof+0x340/0x3d0
alloc_dtl_buffers+0x124/0x1ac
vcpudispatch_stats_write+0x2a8/0x5f4
proc_reg_write+0xf4/0x150
vfs_write+0xfc/0x438
ksys_write+0x88/0x148
system_call_exception+0x1c4/0x5a0
system_call_common+0xf4/0x258 |
| In the Linux kernel, the following vulnerability has been resolved:
media: wl128x: Fix atomicity violation in fmc_send_cmd()
Atomicity violation occurs when the fmc_send_cmd() function is executed
simultaneously with the modification of the fmdev->resp_skb value.
Consider a scenario where, after passing the validity check within the
function, a non-null fmdev->resp_skb variable is assigned a null value.
This results in an invalid fmdev->resp_skb variable passing the validity
check. As seen in the later part of the function, skb = fmdev->resp_skb;
when the invalid fmdev->resp_skb passes the check, a null pointer
dereference error may occur at line 478, evt_hdr = (void *)skb->data;
To address this issue, it is recommended to include the validity check of
fmdev->resp_skb within the locked section of the function. This
modification ensures that the value of fmdev->resp_skb does not change
during the validation process, thereby maintaining its validity.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: Fix looping of queued SG entries
The dwc3_request->num_queued_sgs is decremented on completion. If a
partially completed request is handled, then the
dwc3_request->num_queued_sgs no longer reflects the total number of
num_queued_sgs (it would be cleared).
Correctly check the number of request SG entries remained to be prepare
and queued. Failure to do this may cause null pointer dereference when
accessing non-existent SG entry. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix recursive lock when verdict program return SK_PASS
When the stream_verdict program returns SK_PASS, it places the received skb
into its own receive queue, but a recursive lock eventually occurs, leading
to an operating system deadlock. This issue has been present since v6.9.
'''
sk_psock_strp_data_ready
write_lock_bh(&sk->sk_callback_lock)
strp_data_ready
strp_read_sock
read_sock -> tcp_read_sock
strp_recv
cb.rcv_msg -> sk_psock_strp_read
# now stream_verdict return SK_PASS without peer sock assign
__SK_PASS = sk_psock_map_verd(SK_PASS, NULL)
sk_psock_verdict_apply
sk_psock_skb_ingress_self
sk_psock_skb_ingress_enqueue
sk_psock_data_ready
read_lock_bh(&sk->sk_callback_lock) <= dead lock
'''
This topic has been discussed before, but it has not been fixed.
Previous discussion:
https://lore.kernel.org/all/6684a5864ec86_403d20898@john.notmuch |
| In the Linux kernel, the following vulnerability has been resolved:
brd: defer automatic disk creation until module initialization succeeds
My colleague Wupeng found the following problems during fault injection:
BUG: unable to handle page fault for address: fffffbfff809d073
PGD 6e648067 P4D 123ec8067 PUD 123ec4067 PMD 100e38067 PTE 0
Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 5 UID: 0 PID: 755 Comm: modprobe Not tainted 6.12.0-rc3+ #17
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
1.16.1-2.fc37 04/01/2014
RIP: 0010:__asan_load8+0x4c/0xa0
...
Call Trace:
<TASK>
blkdev_put_whole+0x41/0x70
bdev_release+0x1a3/0x250
blkdev_release+0x11/0x20
__fput+0x1d7/0x4a0
task_work_run+0xfc/0x180
syscall_exit_to_user_mode+0x1de/0x1f0
do_syscall_64+0x6b/0x170
entry_SYSCALL_64_after_hwframe+0x76/0x7e
loop_init() is calling loop_add() after __register_blkdev() succeeds and
is ignoring disk_add() failure from loop_add(), for loop_add() failure
is not fatal and successfully created disks are already visible to
bdev_open().
brd_init() is currently calling brd_alloc() before __register_blkdev()
succeeds and is releasing successfully created disks when brd_init()
returns an error. This can cause UAF for the latter two case:
case 1:
T1:
modprobe brd
brd_init
brd_alloc(0) // success
add_disk
disk_scan_partitions
bdev_file_open_by_dev // alloc file
fput // won't free until back to userspace
brd_alloc(1) // failed since mem alloc error inject
// error path for modprobe will release code segment
// back to userspace
__fput
blkdev_release
bdev_release
blkdev_put_whole
bdev->bd_disk->fops->release // fops is freed now, UAF!
case 2:
T1: T2:
modprobe brd
brd_init
brd_alloc(0) // success
open(/dev/ram0)
brd_alloc(1) // fail
// error path for modprobe
close(/dev/ram0)
...
/* UAF! */
bdev->bd_disk->fops->release
Fix this problem by following what loop_init() does. Besides,
reintroduce brd_devices_mutex to help serialize modifications to
brd_list. |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: intel_soc_pmic_bxtwc: Use IRQ domain for USB Type-C device
While design wise the idea of converting the driver to use
the hierarchy of the IRQ chips is correct, the implementation
has (inherited) flaws. This was unveiled when platform_get_irq()
had started WARN() on IRQ 0 that is supposed to be a Linux
IRQ number (also known as vIRQ).
Rework the driver to respect IRQ domain when creating each MFD
device separately, as the domain is not the same for all of them. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: pcrypt - Call crypto layer directly when padata_do_parallel() return -EBUSY
Since commit 8f4f68e788c3 ("crypto: pcrypt - Fix hungtask for
PADATA_RESET"), the pcrypt encryption and decryption operations return
-EAGAIN when the CPU goes online or offline. In alg_test(), a WARN is
generated when pcrypt_aead_decrypt() or pcrypt_aead_encrypt() returns
-EAGAIN, the unnecessary panic will occur when panic_on_warn set 1.
Fix this issue by calling crypto layer directly without parallelization
in that case. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: clear XPRT_SOCK_UPD_TIMEOUT when reset transport
Since transport->sock has been set to NULL during reset transport,
XPRT_SOCK_UPD_TIMEOUT also needs to be cleared. Otherwise, the
xs_tcp_set_socket_timeouts() may be triggered in xs_tcp_send_request()
to dereference the transport->sock that has been set to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: musb: Fix hardware lockup on first Rx endpoint request
There is a possibility that a request's callback could be invoked from
usb_ep_queue() (call trace below, supplemented with missing calls):
req->complete from usb_gadget_giveback_request
(drivers/usb/gadget/udc/core.c:999)
usb_gadget_giveback_request from musb_g_giveback
(drivers/usb/musb/musb_gadget.c:147)
musb_g_giveback from rxstate
(drivers/usb/musb/musb_gadget.c:784)
rxstate from musb_ep_restart
(drivers/usb/musb/musb_gadget.c:1169)
musb_ep_restart from musb_ep_restart_resume_work
(drivers/usb/musb/musb_gadget.c:1176)
musb_ep_restart_resume_work from musb_queue_resume_work
(drivers/usb/musb/musb_core.c:2279)
musb_queue_resume_work from musb_gadget_queue
(drivers/usb/musb/musb_gadget.c:1241)
musb_gadget_queue from usb_ep_queue
(drivers/usb/gadget/udc/core.c:300)
According to the docstring of usb_ep_queue(), this should not happen:
"Note that @req's ->complete() callback must never be called from within
usb_ep_queue() as that can create deadlock situations."
In fact, a hardware lockup might occur in the following sequence:
1. The gadget is initialized using musb_gadget_enable().
2. Meanwhile, a packet arrives, and the RXPKTRDY flag is set, raising an
interrupt.
3. If IRQs are enabled, the interrupt is handled, but musb_g_rx() finds an
empty queue (next_request() returns NULL). The interrupt flag has
already been cleared by the glue layer handler, but the RXPKTRDY flag
remains set.
4. The first request is enqueued using usb_ep_queue(), leading to the call
of req->complete(), as shown in the call trace above.
5. If the callback enables IRQs and another packet is waiting, step (3)
repeats. The request queue is empty because usb_g_giveback() removes the
request before invoking the callback.
6. The endpoint remains locked up, as the interrupt triggered by hardware
setting the RXPKTRDY flag has been handled, but the flag itself remains
set.
For this scenario to occur, it is only necessary for IRQs to be enabled at
some point during the complete callback. This happens with the USB Ethernet
gadget, whose rx_complete() callback calls netif_rx(). If called in the
task context, netif_rx() disables the bottom halves (BHs). When the BHs are
re-enabled, IRQs are also enabled to allow soft IRQs to be processed. The
gadget itself is initialized at module load (or at boot if built-in), but
the first request is enqueued when the network interface is brought up,
triggering rx_complete() in the task context via ioctl(). If a packet
arrives while the interface is down, it can prevent the interface from
receiving any further packets from the USB host.
The situation is quite complicated with many parties involved. This
particular issue can be resolved in several possible ways:
1. Ensure that callbacks never enable IRQs. This would be difficult to
enforce, as discovering how netif_rx() interacts with interrupts was
already quite challenging and u_ether is not the only function driver.
Similar "bugs" could be hidden in other drivers as well.
2. Disable MUSB interrupts in musb_g_giveback() before calling the callback
and re-enable them afterwars (by calling musb_{dis,en}able_interrupts(),
for example). This would ensure that MUSB interrupts are not handled
during the callback, even if IRQs are enabled. In fact, it would allow
IRQs to be enabled when releasing the lock. However, this feels like an
inelegant hack.
3. Modify the interrupt handler to clear the RXPKTRDY flag if the request
queue is empty. While this approach also feels like a hack, it wastes
CPU time by attempting to handle incoming packets when the software is
not ready to process them.
4. Flush the Rx FIFO instead of calling rxstate() in musb_ep_restart().
This ensures that the hardware can receive packets when there is at
least one request in the queue. Once I
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: hdmi: Avoid hang with debug registers when suspended
Trying to read /sys/kernel/debug/dri/1/hdmi1_regs
when the hdmi is disconnected results in a fatal system hang.
This is due to the pm suspend code disabling the dvp clock.
That is just a gate of the 108MHz clock in DVP_HT_RPI_MISC_CONFIG,
which results in accesses hanging AXI bus.
Protect against this. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: bcm - add error check in the ahash_hmac_init function
The ahash_init functions may return fails. The ahash_hmac_init should
not return ok when ahash_init returns error. For an example, ahash_init
will return -ENOMEM when allocation memory is error. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: handle otx2_mbox_get_rsp errors in otx2_common.c
Add error pointer check after calling otx2_mbox_get_rsp(). |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/mm/fault: Fix kfence page fault reporting
copy_from_kernel_nofault() can be called when doing read of /proc/kcore.
/proc/kcore can have some unmapped kfence objects which when read via
copy_from_kernel_nofault() can cause page faults. Since *_nofault()
functions define their own fixup table for handling fault, use that
instead of asking kfence to handle such faults.
Hence we search the exception tables for the nip which generated the
fault. If there is an entry then we let the fixup table handler handle the
page fault by returning an error from within ___do_page_fault().
This can be easily triggered if someone tries to do dd from /proc/kcore.
eg. dd if=/proc/kcore of=/dev/null bs=1M
Some example false negatives:
===============================
BUG: KFENCE: invalid read in copy_from_kernel_nofault+0x9c/0x1a0
Invalid read at 0xc0000000fdff0000:
copy_from_kernel_nofault+0x9c/0x1a0
0xc00000000665f950
read_kcore_iter+0x57c/0xa04
proc_reg_read_iter+0xe4/0x16c
vfs_read+0x320/0x3ec
ksys_read+0x90/0x154
system_call_exception+0x120/0x310
system_call_vectored_common+0x15c/0x2ec
BUG: KFENCE: use-after-free read in copy_from_kernel_nofault+0x9c/0x1a0
Use-after-free read at 0xc0000000fe050000 (in kfence-#2):
copy_from_kernel_nofault+0x9c/0x1a0
0xc00000000665f950
read_kcore_iter+0x57c/0xa04
proc_reg_read_iter+0xe4/0x16c
vfs_read+0x320/0x3ec
ksys_read+0x90/0x154
system_call_exception+0x120/0x310
system_call_vectored_common+0x15c/0x2ec |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/fadump: Move fadump_cma_init to setup_arch() after initmem_init()
During early init CMA_MIN_ALIGNMENT_BYTES can be PAGE_SIZE,
since pageblock_order is still zero and it gets initialized
later during initmem_init() e.g.
setup_arch() -> initmem_init() -> sparse_init() -> set_pageblock_order()
One such use case where this causes issue is -
early_setup() -> early_init_devtree() -> fadump_reserve_mem() -> fadump_cma_init()
This causes CMA memory alignment check to be bypassed in
cma_init_reserved_mem(). Then later cma_activate_area() can hit
a VM_BUG_ON_PAGE(pfn & ((1 << order) - 1)) if the reserved memory
area was not pageblock_order aligned.
Fix it by moving the fadump_cma_init() after initmem_init(),
where other such cma reservations also gets called.
<stack trace>
==============
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10010
flags: 0x13ffff800000000(node=1|zone=0|lastcpupid=0x7ffff) CMA
raw: 013ffff800000000 5deadbeef0000100 5deadbeef0000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(pfn & ((1 << order) - 1))
------------[ cut here ]------------
kernel BUG at mm/page_alloc.c:778!
Call Trace:
__free_one_page+0x57c/0x7b0 (unreliable)
free_pcppages_bulk+0x1a8/0x2c8
free_unref_page_commit+0x3d4/0x4e4
free_unref_page+0x458/0x6d0
init_cma_reserved_pageblock+0x114/0x198
cma_init_reserved_areas+0x270/0x3e0
do_one_initcall+0x80/0x2f8
kernel_init_freeable+0x33c/0x530
kernel_init+0x34/0x26c
ret_from_kernel_user_thread+0x14/0x1c |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix UAF via mismatching bpf_prog/attachment RCU flavors
Uprobes always use bpf_prog_run_array_uprobe() under tasks-trace-RCU
protection. But it is possible to attach a non-sleepable BPF program to a
uprobe, and non-sleepable BPF programs are freed via normal RCU (see
__bpf_prog_put_noref()). This leads to UAF of the bpf_prog because a normal
RCU grace period does not imply a tasks-trace-RCU grace period.
Fix it by explicitly waiting for a tasks-trace-RCU grace period after
removing the attachment of a bpf_prog to a perf_event. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: Fix UAF in blkcg_unpin_online()
blkcg_unpin_online() walks up the blkcg hierarchy putting the online pin. To
walk up, it uses blkcg_parent(blkcg) but it was calling that after
blkcg_destroy_blkgs(blkcg) which could free the blkcg, leading to the
following UAF:
==================================================================
BUG: KASAN: slab-use-after-free in blkcg_unpin_online+0x15a/0x270
Read of size 8 at addr ffff8881057678c0 by task kworker/9:1/117
CPU: 9 UID: 0 PID: 117 Comm: kworker/9:1 Not tainted 6.13.0-rc1-work-00182-gb8f52214c61a-dirty #48
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022
Workqueue: cgwb_release cgwb_release_workfn
Call Trace:
<TASK>
dump_stack_lvl+0x27/0x80
print_report+0x151/0x710
kasan_report+0xc0/0x100
blkcg_unpin_online+0x15a/0x270
cgwb_release_workfn+0x194/0x480
process_scheduled_works+0x71b/0xe20
worker_thread+0x82a/0xbd0
kthread+0x242/0x2c0
ret_from_fork+0x33/0x70
ret_from_fork_asm+0x1a/0x30
</TASK>
...
Freed by task 1944:
kasan_save_track+0x2b/0x70
kasan_save_free_info+0x3c/0x50
__kasan_slab_free+0x33/0x50
kfree+0x10c/0x330
css_free_rwork_fn+0xe6/0xb30
process_scheduled_works+0x71b/0xe20
worker_thread+0x82a/0xbd0
kthread+0x242/0x2c0
ret_from_fork+0x33/0x70
ret_from_fork_asm+0x1a/0x30
Note that the UAF is not easy to trigger as the free path is indirected
behind a couple RCU grace periods and a work item execution. I could only
trigger it with artifical msleep() injected in blkcg_unpin_online().
Fix it by reading the parent pointer before destroying the blkcg's blkg's. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer
Considering that in some extreme cases,
when u_serial driver is accessed by multiple threads,
Thread A is executing the open operation and calling the gs_open,
Thread B is executing the disconnect operation and calling the
gserial_disconnect function,The port->port_usb pointer will be set to NULL.
E.g.
Thread A Thread B
gs_open() gadget_unbind_driver()
gs_start_io() composite_disconnect()
gs_start_rx() gserial_disconnect()
... ...
spin_unlock(&port->port_lock)
status = usb_ep_queue() spin_lock(&port->port_lock)
spin_lock(&port->port_lock) port->port_usb = NULL
gs_free_requests(port->port_usb->in) spin_unlock(&port->port_lock)
Crash
This causes thread A to access a null pointer (port->port_usb is null)
when calling the gs_free_requests function, causing a crash.
If port_usb is NULL, the release request will be skipped as it
will be done by gserial_disconnect.
So add a null pointer check to gs_start_io before attempting
to access the value of the pointer port->port_usb.
Call trace:
gs_start_io+0x164/0x25c
gs_open+0x108/0x13c
tty_open+0x314/0x638
chrdev_open+0x1b8/0x258
do_dentry_open+0x2c4/0x700
vfs_open+0x2c/0x3c
path_openat+0xa64/0xc60
do_filp_open+0xb8/0x164
do_sys_openat2+0x84/0xf0
__arm64_sys_openat+0x70/0x9c
invoke_syscall+0x58/0x114
el0_svc_common+0x80/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x38/0x68 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf,perf: Fix invalid prog_array access in perf_event_detach_bpf_prog
Syzbot reported [1] crash that happens for following tracing scenario:
- create tracepoint perf event with attr.inherit=1, attach it to the
process and set bpf program to it
- attached process forks -> chid creates inherited event
the new child event shares the parent's bpf program and tp_event
(hence prog_array) which is global for tracepoint
- exit both process and its child -> release both events
- first perf_event_detach_bpf_prog call will release tp_event->prog_array
and second perf_event_detach_bpf_prog will crash, because
tp_event->prog_array is NULL
The fix makes sure the perf_event_detach_bpf_prog checks prog_array
is valid before it tries to remove the bpf program from it.
[1] https://lore.kernel.org/bpf/Z1MR6dCIKajNS6nU@krava/T/#m91dbf0688221ec7a7fc95e896a7ef9ff93b0b8ad |
