| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Autonomic Networking Infrastructure (ANI) feature of Cisco IOS Software (15.4 through 15.6) and Cisco IOS XE Software (3.7 through 3.18, and 16) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incomplete input validation on certain crafted packets. An attacker could exploit this vulnerability by sending a crafted IPv6 packet to a device that is running a Cisco IOS Software or Cisco IOS XE Software release that supports the ANI feature. A device must meet two conditions to be affected by this vulnerability: (1) the device must be running a version of Cisco IOS Software or Cisco IOS XE Software that supports ANI (regardless of whether ANI is configured); and (2) the device must have a reachable IPv6 interface. An exploit could allow the attacker to cause the affected device to reload. Cisco Bug IDs: CSCvc42729. |
| A vulnerability in the web user interface of Cisco IOS XE 3.1 through 3.17 could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient resource handling by the affected software when the web user interface is under a high load. An attacker could exploit this vulnerability by sending a high number of requests to the web user interface of the affected software. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. To exploit this vulnerability, the attacker must have access to the management interface of the affected software, which is typically connected to a restricted management network. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the web user interface of the software is enabled. By default, the web user interface is not enabled. Cisco Bug IDs: CSCup70353. |
| A vulnerability in Multicast Source Discovery Protocol (MSDP) ingress packet processing for Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the MSDP session to be unexpectedly reset, causing a short denial of service (DoS) condition. The MSDP session will restart within a few seconds. More Information: CSCvd94828. Known Affected Releases: 4.3.2.MCAST 6.0.2.BASE. Known Fixed Releases: 6.3.1.19i.MCAST 6.2.3.1i.MCAST 6.2.2.17i.MCAST 6.1.4.12i.MCAST. |
| A vulnerability in Simple Network Management Protocol (SNMP) functions of Cisco ASR 1000 Series Aggregation Services Routers running Cisco IOS XE Software Release 3.13.6S, 3.16.2S, or 3.17.1S could allow an authenticated, remote attacker to cause high CPU usage on an affected device, resulting in a denial of service (DoS) condition. More Information: CSCux68796. Known Affected Releases: 15.5(3)S2.1 15.6(1)S1.1. Known Fixed Releases: 15.4(3)S6.1 15.4(3)S6.2 15.5(3)S2.2 15.5(3)S3 15.6(0.22)S0.23 15.6(1)S2 16.2(0.295) 16.3(0.94) 15.5.3S3. |
| A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078. |
| A vulnerability in the handling of list headers in Cisco cBR Series Converged Broadband Routers could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a denial of service (DoS) condition. Cisco cBR-8 Converged Broadband Routers running vulnerable versions of Cisco IOS XE are affected. More Information: CSCux40637. Known Affected Releases: 15.5(3)S 15.6(1)S. Known Fixed Releases: 15.5(3)S2 15.6(1)S1 15.6(2)S 15.6(2)SP 16.4(1). |
| A vulnerability in the web framework code of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web interface of the affected software. The vulnerability is due to insufficient input validation of some parameters that are passed to the web server of the affected software. An attacker could exploit this vulnerability by convincing a user of the web interface to access a malicious link or by intercepting a user request for the affected web interface and injecting malicious code into the request. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected web interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvb09516. |
| Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCut50727. |
| A vulnerability in the DHCP client implementation of Cisco IOS (12.2, 12.4, and 15.0 through 15.6) and Cisco IOS XE (3.3 through 3.7) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability occurs during the parsing of a crafted DHCP packet. An attacker could exploit this vulnerability by sending crafted DHCP packets to an affected device that is configured as a DHCP client. A successful exploit could allow the attacker to cause a reload of an affected device, resulting in a DoS condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or IOS XE Software and using a specific DHCP client configuration. Cisco Bug IDs: CSCuu43892. |
| A vulnerability in the web framework of Cisco IOS XE Software could allow an authenticated, remote attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of HTTP parameters supplied by the user. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the affected web page parameter. The user must be authenticated to access the affected parameter. A successful exploit could allow the attacker to execute commands with root privileges. This vulnerability affects Cisco devices running Cisco IOS XE Software Release 16.2.1, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration interface was introduced in the Denali 16.2 Release of Cisco IOS XE Software. The web-based administration interface in earlier releases of Cisco IOS XE Software is not affected by this vulnerability. Cisco Bug IDs: CSCuy83069. |
| Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCur29331. |
| A vulnerability in the Event Management Service daemon (emsd) of Cisco IOS XR routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to improper handling of gRPC requests. An attacker could exploit this vulnerability by repeatedly sending unauthenticated gRPC requests to the affected device. A successful exploit could allow the attacker to crash the device in such a manner that manual intervention is required to recover. This vulnerability affects all Cisco IOS XR platforms that are running release 6.1.1 of Cisco IOS XR Software when the gRPC service is enabled on the device. The gRPC service is not enabled by default. Cisco Bug IDs: CSCvb14441. |
| Cisco IOS before 15.2(4)S6 does not initialize an unspecified variable, which might allow remote authenticated users to cause a denial of service (CPU consumption, watchdog timeout, crash) by walking specific SNMP objects. |
| A vulnerability in the Local Packet Transport Services (LPTS) ingress frame-processing functionality of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause one of the LPTS processes on an affected system to restart unexpectedly, resulting in a brief denial of service (DoS) condition. The vulnerability is due to incomplete LPTS frame validation by the affected software. An attacker could exploit this vulnerability by sending crafted XML requests to the management interface of an affected system. A successful exploit could allow the attacker to cause one of the LPTS processes on the affected system to restart unexpectedly, which would impact LPTS traffic and cause a brief DoS condition while the process restarts. Cisco Bug IDs: CSCvf76332. |
| A vulnerability in Google-defined remote procedure call (gRPC) handling in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the Event Management Service daemon (emsd) to crash due to a system memory leak, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco IOS XR Software with gRPC enabled. More Information: CSCvb14433. Known Affected Releases: 6.1.1.BASE 6.2.1.BASE. Known Fixed Releases: 6.2.1.22i.MGBL 6.1.22.9i.MGBL 6.1.21.12i.MGBL 6.1.2.13i.MGBL. |
| A vulnerability in the IOS daemon (IOSd) web-based management interface of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface on an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the web-based management interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvf60862. |
| A vulnerability in the implementation of the Locator/ID Separation Protocol (LISP) in Cisco IOS XE 3.2 through 16.5 could allow an unauthenticated, remote attacker using an x tunnel router to bypass authentication checks performed when registering an Endpoint Identifier (EID) to a Routing Locator (RLOC) in the map server/map resolver (MS/MR). The vulnerability is due to a logic error introduced via a code regression for the affected software. An attacker could exploit this vulnerability by sending specific valid map-registration requests, which will be accepted by the MS/MR even if the authentication keys do not match, to the affected software. A successful exploit could allow the attacker to inject invalid mappings of EIDs to RLOCs in the MS/MR of the affected software. This vulnerability affects Cisco devices that are configured with LISP acting as an IPv4 or IPv6 map server. This vulnerability affects Cisco IOS XE Software release trains 3.9E and Everest 16.4. Cisco Bug IDs: CSCvc18008. |
| A vulnerability in motherboard console ports of line cards for Cisco ASR 1000 Series Aggregation Services Routers and Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, physical attacker to access an affected device's operating system. The vulnerability exists because an engineering console port is available on the motherboard of the affected line cards. An attacker could exploit this vulnerability by physically connecting to the console port on the line card. A successful exploit could allow the attacker to gain full access to the affected device's operating system. This vulnerability affects only Cisco ASR 1000 Series Routers that have removable line cards and Cisco cBR-8 Converged Broadband Routers, if they are running certain Cisco IOS XE 3.16 through 16.5 releases. Cisco Bug IDs: CSCvc65866, CSCve77132. |
| A vulnerability in the REST API of the web-based user interface (web UI) of Cisco IOS XE 3.1 through 16.5 could allow an unauthenticated, remote attacker to bypass authentication to the REST API of the web UI of the affected software. The vulnerability is due to insufficient input validation for the REST API of the affected software. An attacker could exploit this vulnerability by sending a malicious API request to an affected device. A successful exploit could allow the attacker to bypass authentication and gain access to the web UI of the affected software. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software, if the HTTP Server feature is enabled for the device. The newly redesigned, web-based administration UI was introduced in the Denali 16.2 Release of Cisco IOS XE Software. This vulnerability does not affect the web-based administration UI in earlier releases of Cisco IOS XE Software. Cisco Bug IDs: CSCuz46036. |
| A vulnerability in the web-based Wireless Controller GUI of Cisco IOS XE Software for Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, and Cisco New Generation Wireless Controllers (NGWC) 3850 could allow an authenticated, remote attacker to elevate their privileges on an affected device. The vulnerability is due to incomplete input validation of HTTP requests by the affected GUI, if the GUI connection state or protocol changes. An attacker could exploit this vulnerability by authenticating to the Wireless Controller GUI as a Lobby Administrator user of an affected device and subsequently changing the state or protocol for their connection to the GUI. A successful exploit could allow the attacker to elevate their privilege level to administrator and gain full control of the affected device. This vulnerability affects the following Cisco products if they are running Cisco IOS XE Software Release 3.7.0E, 3.7.1E, 3.7.2E, 3.7.3E, 3.7.4E, or 3.7.5E: Cisco 5760 Wireless LAN Controllers, Cisco Catalyst 4500E Supervisor Engine 8-E (Wireless) Switches, Cisco New Generation Wireless Controllers (NGWC) 3850. Cisco Bug IDs: CSCvd73746. |
