| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix auxiliary device add/del races
Two paths add or delete the same slot (pf->vfs[vf_id].padev): a VF's
pdsc_reset_done() and the PF's devlink enable_vnet/disable_vnet handler.
They serialize on config_lock, but neither guards the slot under it
correctly.
add() registers and stores a new auxiliary device without first checking
the slot, so a second add of an already-populated slot leaks the first
device. del() makes that check outside config_lock, so two concurrent
dels can both pass it; the first clears the slot, and the second
dereferences a NULL pointer.
Check and update the slot under config_lock in both paths. |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Fix element size accounting for cmd stream validation
There are 2 issues with the element size handling in the command stream
validation which result in too small of a size calculated when the
element size is 16/32/64 bits.
For NHWC format, the element size is simply missing from the
calculation.
The bitfield for the element size is different between IFM/IFM2 and
OFM. IFM and IFM2 encode the precision in parameter bits 2:3, while OFM
uses bits 1:2. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate stream count in sctp_process_strreset_inreq()
When processing a RESET_IN_REQUEST from a peer,
sctp_process_strreset_inreq() derives the stream count from the
parameter length but does not check whether the resulting
RESET_OUT_REQUEST would exceed SCTP_MAX_CHUNK_LEN.
The OUT request header (sctp_strreset_outreq, 16 bytes) is 8 bytes
larger than the IN request header (sctp_strreset_inreq, 8 bytes).
Generally, the IP payload is bounded to 65535 bytes, so the stream
list cannot be large enough to trigger the overflow. However, on
interfaces with MTU > 65535 (e.g., loopback with IPv6 jumbograms), a
stream list that fits within the incoming IN parameter can cause a
__u16 overflow in sctp_make_strreset_req() when computing the OUT
request size, leading to an undersized skb allocation and a kernel
BUG:
net/core/skbuff.c:207 skb_panic
net/core/skbuff.c:2625 skb_put
net/sctp/sm_make_chunk.c:1535 sctp_addto_chunk
net/sctp/sm_make_chunk.c:3695 sctp_make_strreset_req
net/sctp/stream.c:655 sctp_process_strreset_inreq
The local setsockopt path validates the generated reset request size.
However, for an incoming-only reset, it accounts for the smaller IN
request even though the peer must generate an OUT request with the same
stream list. Such a request cannot be completed successfully by the
peer.
Reject peer IN requests whose corresponding OUT request would exceed
SCTP_MAX_CHUNK_LEN. Also tighten the local check so it does not send an
IN request that would require an oversized OUT request from the peer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mctp i3c: clean up notifier and buses if driver register fails
mctp_i3c_mod_init() registers the I3C bus notifier and then walks the
existing buses with i3c_for_each_bus_locked(mctp_i3c_bus_add_new, NULL)
before registering the I3C device driver. If i3c_driver_register()
fails, the function returns the error directly, leaving the notifier
registered and every mctp_i3c_bus object created for the existing buses
allocated. The notifier is left pointing into the module that failed to
load and the bus list is leaked.
Mirror the module exit path on this failure: unregister the notifier and
tear down the buses that were added before returning the error.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: fix infinite loop in __tipc_nl_compat_dumpit
cmd->dumpit callback can return a negative errno, causing an infinite
loop due to the while(len) condition. As the loop never terminates,
genl_mutex is never released, and other tasks waiting on it starve in D
state.
Check dumpit's return value, propagate it and jump to err_out on error. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: fix cifsFileInfo leak on kmalloc failure in deferred close drain paths
In cifs_close_deferred_file(), cifs_close_all_deferred_files(), and
cifs_close_deferred_file_under_dentry(), when a pending deferred close
is cancelled via cancel_delayed_work(), the subsequent kmalloc_obj() to
add the file to the local processing list may fail under memory pressure.
The loop breaks immediately, but the cancelled work is no longer pending
(it would have called _cifsFileInfo_put()), and the cfile is never added
to file_head for processing. The cifsFileInfo reference and the open
server handle both leak.
Fix by saving the cfile that failed allocation in a local variable,
breaking as before, and calling _cifsFileInfo_put() on it after
releasing the lock. Any files later in the iteration are unaffected
since their deferred work is still pending and will fire normally. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: guard link STA in decap offload
mt7925_sta_set_decap_offload() iterates over the vif valid_links mask
when updating decap offload state for an MLO station. The station may not
have a link STA for every valid link of the vif, so mt792x_sta_to_link()
can return NULL for a link that belongs to the vif but not to the station.
The function currently dereferences mlink before checking whether the
link WCID is ready. If mlink is NULL, setting or clearing
MT_WCID_FLAG_HDR_TRANS dereferences a NULL pointer.
Skip links without a station link before touching mlink->wcid. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: guard HE capability lookups
mt7915_mcu_bss_he_tlv() and mt7915_mcu_sta_bfer_tlv() both run after
checking HE support, then dereference the HE PHY capability returned by
mt76_connac_get_he_phy_cap(). That helper can return NULL when no
capability entry matches the vif type.
Fetch the capability before appending the TLV and skip the HE-specific
setup when no matching capability is available. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: connac: fix possible NULL-pointer deref in mt76_connac_mcu_uni_bss_he_tlv()
mt76_connac_get_he_phy_cap routine can theoretically return NULL so
check cap pointer before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: check pointer returned by mt76_connac_get_he_phy_cap()
mt76_connac_get_he_phy_cap routine can theoretically return NULL so
check cap pointer before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: fix crash in reset link replay
During reset recovery, mt7925_vif_connect_iter() replays firmware state
for links tracked in mvif->valid_links. After MLO link changes or MCU
timeout recovery, the driver bitmap can temporarily contain a link whose
mac80211 bss_conf has already gone away.
This can pass a NULL bss_conf to mt76_connac_mcu_uni_add_dev(), matching
the crash where x1, the second argument, is NULL:
pc : mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
lr : mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
x2 : ffffff80a77f6018 x1 : 0000000000000000 x0 : ffffff8099402080
Call trace:
mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
mt7925_mac_reset_work+0x264/0x2f8 [mt7925_common]
Skip missing bss_conf entries before replaying the link. Non-MLO AP/STA
reset replay is unchanged because the helper still returns &vif->bss_conf
for the legacy link. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix possible NULL-pointer deref in mt7996_mcu_sta_bfer_eht()
mt76_connac_get_eht_phy_cap routine can theoretically return NULL so
check cap pointer before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vf: Add drm_dev guards when detaching CCS read/write buffers
CCS read/write buffers are freed during BO destruction. In some cases,
BOs may be destroyed after the device is unbound but while the DRM
structure remains valid, leading to NULL pointer dereferences when
accessing device resources.
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 9376 Comm: xe_pat Not tainted 7.2.0-rc2+ #1 PREEMPT(lazy)
RIP: 0010:xe_sriov_vf_ccs_rw_update_bb_addr+0x4d/0xa0 [xe]
RSP: 0018:ffffcf304110b9c8 EFLAGS: 00010246
RAX: ffff8a85c38a0a00 RBX: 00000000810ef000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8a85c39c1888
RBP: ffffcf304110b9e8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a85c39c1888
R13: 0000000000000000 R14: ffff8a85c39b4f28 R15: ffff8a85c3885000
FS: 0000000000000000(0000) GS:ffff8a878b809000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000010314a002 CR4: 0000000000772ef0
PKRU: 55555554
Call Trace:
<TASK>
xe_migrate_ccs_rw_copy_clear+0x98/0x120 [xe]
xe_sriov_vf_ccs_detach_bo+0x2c/0x60 [xe]
xe_ttm_bo_delete_mem_notify+0xc8/0xe0 [xe]
ttm_bo_cleanup_memtype_use+0x26/0x80 [ttm]
ttm_bo_release+0x29e/0x2d0 [ttm]
ttm_bo_fini+0x39/0x70 [ttm]
xe_gem_object_free+0x1f/0x30 [xe]
drm_gem_object_free+0x1d/0x40
ttm_bo_vm_close+0x5f/0x90 [ttm]
remove_vma+0x2c/0x70
tear_down_vmas+0x63/0xf0
exit_mmap+0x20d/0x3f0
__mmput+0x45/0x170
mmput+0x31/0x40
do_exit+0x2ba/0xac0
do_group_exit+0x2d/0xb0
__x64_sys_exit_group+0x18/0x20
x64_sys_call+0x14a0/0x2390
do_syscall_64+0xdd/0x640
? count_memcg_events+0xea/0x240
? handle_mm_fault+0x1ec/0x2f0
(cherry picked from commit 1ae415a6eefe5004954a1d352b1718faca8844ef) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix 802.1X-SHA256 call trace warning
Based on wpa_auth as 1x_256 mode, need to set up
"use_fwsup" with BRCMF_PROFILE_FWSUP_1X.
Or it will happen trace warning when call brcmf_cfg80211_set_pmk().
[ 4481.831101] ------------[ cut here ]------------
[ 4481.831102] WARNING: CPU: 1 PID: 2997 at
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7242 brcmf_cfg80211_set_pmk+0x77/0xd0 [brcmfmac]
[...]
[ 4481.831202] Call Trace:
[ 4481.831204] <TASK>
[ 4481.831205] nl80211_set_pmk+0x183/0x250 [cfg80211]
[ 4481.831233] genl_family_rcv_msg_doit+0xea/0x150
[ 4481.831237] genl_rcv_msg+0x104/0x240
[ 4481.831239] ? cfg80211_probe_status+0x2c0/0x2c0 [cfg80211]
[ 4481.831257] ? genl_family_rcv_msg_doit+0x150/0x150
[ 4481.831259] netlink_rcv_skb+0x4e/0x100
[ 4481.831261] genl_rcv+0x24/0x40
[ 4481.831262] netlink_unicast+0x236/0x380
[ 4481.831264] netlink_sendmsg+0x250/0x4b0
[ 4481.831266] sock_sendmsg+0x5c/0x70
[ 4481.831269] ____sys_sendmsg+0x236/0x2b0
[ 4481.831271] ? copy_msghdr_from_user+0x6d/0xa0
[ 4481.831272] ___sys_sendmsg+0x86/0xd0
[ 4481.831274] ? avc_has_perm+0x8c/0x1a0
[ 4481.831276] ? preempt_count_add+0x6a/0xa0
[ 4481.831279] ? sock_has_perm+0x82/0xa0
[ 4481.831280] __sys_sendmsg+0x57/0xa0
[ 4481.831282] do_syscall_64+0x38/0x90
[ 4481.831284] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 4481.831286] RIP: 0033:0x7fd270d369b4 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: hvs/v3d: Fix null dereference in unbind
The hvs and v3d drivers use dev_get_drvdata(master) in their unbind
functions. Since the vc4-drm gets removed before its dependent drivers
(vc4_hvs/vc4_v3d) the vc4_hvs_unbind/vc4_v3d_unbind functions try to
get drvdata of its master and fails with a null dereference error.
Use the data pointer passed to the unbind functions directly instead of
dev_get_drvdata(master). This avoids using potentially freed memory. |
| In the Linux kernel, the following vulnerability has been resolved:
amt: re-read skb header pointers after every pull
Several AMT receive and transmit paths cache a pointer into the skb head
(ip_hdr(), ipv6_hdr(), eth_hdr() or the AMT message header) and then call
a helper that can reallocate that head before the cached pointer is used
again. pskb_may_pull(), ip_mc_may_pull(), ipv6_mc_may_pull(),
iptunnel_pull_header(), ip_mc_check_igmp() and ipv6_mc_check_mld() can all
free the old head and move the data, so a pointer taken before the call
dangles afterwards and the later access is a use-after-free of the freed
head.
The affected sites are:
amt_rcv() caches ip_hdr() before amt_parse_type() pulls, then reads
iph->saddr.
amt_dev_xmit() caches ip_hdr()/ipv6_hdr() before ip_mc_check_igmp()/
ipv6_mc_check_mld() and pskb_may_pull(), then reads the group address.
amt_multicast_data_handler() caches eth_hdr() before pskb_may_pull(),
then writes the L2 header.
amt_membership_query_handler() caches the AMT header, the outer and
inner eth_hdr() and ip_hdr() before iptunnel_pull_header() and several
pulls, then reads and writes them.
amt_igmpv3_report_handler() and amt_mldv2_report_handler() cache
ip_hdr()/ipv6_hdr() and the current group record and read the record
count from the report header inside the record loop, across the
*_mc_may_pull() calls.
amt_update_handler() caches ip_hdr() and the AMT membership-update
header before pskb_may_pull(), iptunnel_pull_header(),
ip_mc_check_igmp() and the report handler, then reads iph->daddr and
amtmu->nonce / amtmu->response_mac.
Fix each site by either snapshotting the scalar that is used after the
pull before the first pull runs, or re-deriving the header pointer from
the skb after the last pull that can move the head. Values that are
stable across the pull (source and group address, the response MAC and
nonce, the record count, the outer source MAC) are snapshotted; pointers
that are written through or read repeatedly are re-derived. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: fix memory leak on slave unregistration by removing synced VLANs
When an HSR master device is brought UP, it auto-adds VLAN 0 via
vlan_vid0_add(), which propagates VID 0 to its slave devices (slave A and B).
If a slave device is later unregistered while HSR is active (e.g., during
netns cleanup or interface destruction), hsr_del_port() is called to
detach the slave port from the HSR master. However, hsr_del_port() currently
does not delete the VLAN IDs that were synced to the slave device by HSR.
As a result, the slave device retains a refcount on VID 0 (and any other
synced VLANs). When the slave device is destroyed, its vlan_info /
vlan_vid_info structure remains allocated, leading to a memory leak.
Fix this by calling vlan_vids_del_by_dev(port->dev, master->dev) in
hsr_del_port() before unlinking slave A or slave B ports, matching the
propagation logic in hsr_ndo_vlan_rx_add_vid() / hsr_ndo_vlan_rx_kill_vid()
and the cleanup behavior in bonding and team drivers. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: auth: verify auth requirement when auth_chunk is NULL
sctp_auth_chunk_verify() returns true unconditionally when
chunk->auth_chunk is NULL, silently skipping authentication.
This is incorrect when:
1. skb_clone() failed in the BH receive path, leaving auth_chunk
NULL. In sctp_endpoint_bh_rcv() asoc is NULL for new
connections, so the early sctp_auth_recv_cid() check cannot
catch this.
2. No AUTH chunk precedes COOKIE-ECHO, so skb_clone() is never
called and auth_chunk remains NULL.
Fix by checking sctp_auth_recv_cid() when auth_chunk is NULL:
if authentication is required, return false to drop the chunk;
otherwise continue normally. |
| In the Linux kernel, the following vulnerability has been resolved:
vmxnet3: fix BUG_ON in vmxnet3_get_hdr_len() for Geneve packets
vmxnet3_get_hdr_len() assumes gdesc->rcd.v4/v6/tcp always describe the
outer header, but for a Geneve-encapsulated packet the device can set
them based on the inner header instead, signalled by the
VMXNET3_RCD_HDR_INNER_SHIFT bit in the completion descriptor. Since the
function never skips the outer encapsulation, this mismatch triggers:
- BUG_ON(hdr.ipv4->protocol != IPPROTO_TCP), because the outer
protocol is UDP (Geneve), not TCP.
- BUG_ON(hdr.eth->h_proto != ...), when the tunnel's outer and inner
IP versions differ (e.g. outer IPv6/inner IPv4 or vice versa).
Check VMXNET3_RCD_HDR_INNER_SHIFT up front and bail out, since the
function cannot locate the inner header it would need to parse. Also
convert the remaining BUG_ON()s in this function to return 0
defensively. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/vm: Fix SVM leak on resv obj alloc failure in xe_vm_create()
Commit 9e9787414882 ("drm/xe/userptr: replace xe_hmm with gpusvm") made
xe_svm_init() unconditional in xe_vm_create() and extended it to also
initialize a "simple" gpusvm state for non-fault-mode VMs. The matching
xe_svm_fini() call in xe_vm_close_and_put() was updated to run
unconditionally, but the error unwind path in xe_vm_create() was not.
On the drm_gpuvm_resv_object_alloc() failure path, xe_svm_init() has
already succeeded but xe_svm_fini() is only called when
XE_VM_FLAG_FAULT_MODE is set. For non-fault-mode VMs this leaves
vm->svm.gpusvm partially initialized and leaks the resources allocated
by drm_gpusvm_init().
For fault-mode VMs, xe_svm_init() additionally acquires the pagemap
owner via drm_pagemap_acquire_owner() and the pagemaps via
xe_svm_get_pagemaps(). Those resources are released by xe_svm_close(),
not xe_svm_fini(). On the same error path, xe_svm_close() is not
called either, so fault-mode VMs leak the pagemap owner and pagemaps.
Fix both leaks:
- Call xe_svm_fini() unconditionally on the err_svm_fini path, matching
the unconditional xe_svm_init() call. Move the vm->size = 0
assignment out of the conditional so the xe_vm_is_closed() assert in
xe_svm_fini() (and xe_svm_close()) holds for both modes.
- Call xe_svm_close() for fault-mode VMs before xe_svm_fini(), matching
the ordering used in xe_vm_close_and_put().
(cherry picked from commit ca2a3587d577ba764e0fe628fb676244fc33ddd4) |
