| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: copy only received bytes on short ep0 read
ffs_ep0_read() allocates its control-OUT data buffer with
kmalloc() (not kzalloc) at the Length value from the Setup
packet, then copies that full len to userspace regardless of
how many bytes were actually received:
data = kmalloc(len, GFP_KERNEL);
...
ret = __ffs_ep0_queue_wait(ffs, data, len);
if ((ret > 0) && (copy_to_user(buf, data, len)))
ret = -EFAULT;
__ffs_ep0_queue_wait() returns req->actual, which on a short
control OUT transfer is strictly less than len. The
copy_to_user() call still copies len bytes, so on a short OUT
the last (len - ret) bytes of the kmalloc() buffer --
uninitialised slab residue -- are delivered to the FunctionFS
daemon.
Short ep0 OUT completions are specified USB control-transfer
behavior and are produced by in-tree UDCs:
* dwc2 continues on req->actual < req->length for ep0 DATA OUT
(short-not-ok is the only ep0-OUT stall path).
* aspeed_udc ends ep0 OUT on rx_len < ep->ep.maxpacket.
* renesas_usbf logs "ep0 short packet" and completes the
request.
* dwc3 stalls on short IN but not on short OUT.
A short ep0 OUT is therefore not evidence of a broken UDC; it is
a normal condition f_fs has to cope with. The sibling gadgetfs
implementation in drivers/usb/gadget/legacy/inode.c already does
this correctly via min(len, dev->req->actual) before
copy_to_user(). This patch brings f_fs.c to the same safe
pattern rather than trimming at a defensive layer.
The bug is reached from the FunctionFS device node, which in
real deployments is owned by the privileged gadget daemon
(adbd, UMS, composite gadget services, etc.); it is not
reachable from unprivileged userspace. Linux host stacks
normally reject short-wLength control OUTs before they reach
the gadget, so reproducing this required a build that
bypasses that host-side check. With the bypass in place, a
1-byte payload on a 64-byte Setup produces 63 bytes of
non-canary slab residue in the daemon's read buffer.
Fix by copying only ret (actually received) bytes to
userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: composite: fix integer underflow in WebUSB GET_URL handling
The WebUSB GET_URL handler in composite_setup() narrows
landing_page_length to fit the host-supplied wLength using
landing_page_length = w_length
- WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset;
If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the
unsigned subtraction wraps, and the subsequent
memcpy(url_descriptor->URL,
cdev->landing_page + landing_page_offset,
landing_page_length - landing_page_offset);
ends up copying close to UINT_MAX bytes from cdev->landing_page into
cdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setup
on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the
memcpy as a 4294967293-byte field-spanning write into
url_descriptor->URL (size 252).
A USB host can reach this from a single SETUP packet against any
gadget that has webusb/use=1 and a landingPage configured.
Handle the small-wLength case before the math: when the host requested
fewer bytes than the URL descriptor header, only the header is
meaningful and no URL bytes need to be copied. Setting
landing_page_length to landing_page_offset makes the existing memcpy a
no-op and leaves the descriptor returned to the host unchanged for all
larger wLength values. |
| A vulnerability was identified in SourceCodester Class and Exam Timetabling System 1.0. Affected by this issue is some unknown functionality of the file /schoolyr.php. The manipulation of the argument sy leads to cross site scripting. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. |
| A flaw was found in Red Hat Quay's Proxy Cache configuration feature. When an organization administrator configures an upstream registry for proxy caching, Quay makes a network connection to the specified registry hostname without verifying that it points to a legitimate external service. An attacker with organization administrator privileges could supply a crafted hostname to force the Quay server to make requests to internal network services, cloud infrastructure endpoints, or other resources that should not be accessible from the Quay application. |
| FreeScout is a free help desk and shared inbox built with PHP's Laravel framework. FreeScout's `Manage -> Logs -> App Logs` feature uses the bundled `rap2hpoutre/laravel-log-viewer` override to decrypt a user-supplied file identifier and then pass the resolved path to Laravel's download response. Prior to version 1.8.224, the path resolution logic accepts any existing absolute path before applying the intended `storage/logs` restriction. As a result, an attacker who can access the App Logs route and forge a valid Laravel-encrypted `dl` parameter can download arbitrary server-local files readable by the PHP process, not just log files. Version 1.8.224 contains a fix. |
| The Caddy Defender plugin is a middleware for Caddy that allows users to block or manipulate requests based on the client's IP address. Prior to version 0.10.1, Caddy Defender used `r.RemoteAddr` when evaluating whether a request should be blocked. `RemoteAddr` is the address of the immediate peer connected to Caddy. In deployments where Caddy is behind a trusted proxy, CDN, or load balancer, the immediate peer is usually the proxy, not the original client. Caddy resolves the original client address into its `client_ip` request variable after applying the configured `trusted_proxies` policy, but Defender did not use that value. As a result, clients from blocked IP ranges could bypass Defender when accessing Caddy through a trusted proxy whose own IP address was not blocked. This affects deployments that use Defender behind trusted proxies and expect it to enforce blocking based on the real client IP. The issue is fixed in version 0.10.1 by making Defender prefer Caddys resolved `client_ip` request variable when it is available. Defender falls back to `RemoteAddr` only when Caddy has not provided a resolved client IP. There is no complete workaround in affected Defender versions for deployments that rely on Caddy's trusted proxy client IP resolution. Until upgrading, affected users should enforce equivalent IP blocking at the trusted proxy, CDN, load balancer, firewall, or other edge layer before traffic reaches Caddy. Deployments where Caddy receives traffic directly from clients, without an intermediate trusted proxy, are not affected by this bypass. |
| IBM Storage Protect Client 8.1.0.0 through 8.1.27.0, 8.1.27.1, and 8.2.0.0 through 8.2.1.0 IBM Storage Protect is vulnerable to a heap-based buffer overflow, caused by improper bounds checking. A remote attacker could overflow a buffer and execute arbitrary code on the system or cause the server to crash. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix data-race on iso_pi fields in hci_get_route calls
iso_connect_bis(), iso_connect_cis(), iso_listen_bis(), and
iso_conn_big_sync() call hci_get_route() using iso_pi(sk)->dst,
iso_pi(sk)->src, and iso_pi(sk)->src_type without holding lock_sock().
These fields may be modified concurrently by connect() or setsockopt()
on the same socket, resulting in data-races reported by KCSAN.
Fix this by snapshotting the required fields under lock_sock() before
calling hci_get_route().
BUG: KCSAN: data-race in memcmp+0x45/0xb0
race at unknown origin, with read to 0xffff8880122135cf of 1 bytes
by task 333 on cpu 1:
memcmp+0x45/0xb0
hci_get_route+0x27e/0x490
iso_connect_cis+0x4c/0xa10
iso_sock_connect+0x60e/0xb30
__sys_connect_file+0xbd/0xe0
__sys_connect+0xe0/0x110
__x64_sys_connect+0x40/0x50
x64_sys_call+0xcad/0x1c60
do_syscall_64+0x133/0x590
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: check num_entries in GEM_OP GET_MAPPING_INFO
kvcalloc(args->num_entries, sizeof(*vm_entries), GFP_KERNEL) at
amdgpu_gem.c:1050 uses the user-supplied num_entries directly without
any upper bounds check. Since num_entries is a __u32 and
sizeof(drm_amdgpu_gem_vm_entry) is 32 bytes, a large num_entries
produces an allocation exceeding INT_MAX, triggering
WARNING in __kvmalloc_node_noprof(), causing a kernel WARNING,
TAINT_WARN, and panic on CONFIG_PANIC_ON_WARN=y systems.
Add a size bounds check before we invoke the kvzalloc() to
reject oversized num_entries early with -EINVAL.
(cherry picked from commit 1fe7bf5457f6efd7be60b17e23163ba54341d73d) |
| Heap type confusion and out-of-bounds read/write in the Apache Fory C++ implementation. When deserializing data in compatible mode, the field-skip paths do not correctly validate the declared field types against the actual data, so input with an inconsistent schema can cause type confusion and out-of-bounds memory access. Only the C++ implementation is affected; other language implementations of Apache Fory are not.
This issue affects Apache Fory C++: from 0.14.0 before 1.4.0.
Users are recommended to upgrade to version 1.4.0, which fixes the issue. |
| The bpost-shipping-platform WordPress plugin before 3.2.3 does not properly sanitize a parameter before using it in a SQL query during WooCommerce order submission, allowing unauthenticated attackers to perform time-based blind SQL injection on stores running this bpost-shipping-platform WordPress plugin before 3.2.3. |
| The WPBot WordPress plugin before 8.2.0 does not perform a capability or nonce check in one of its retrieval-augmented-generation settings handlers, allowing authenticated users with subscriber-level access to modify the WPBot WordPress plugin before 8.2.0's configuration. |
| A vulnerability has been found in D-Link DNS-320 1.0.2. Impacted is an unknown function of the file /web/jquery/uploader/multi_uploadify.php. The manipulation of the argument Filedata[] leads to unrestricted upload. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. |
| Dell Device Management Agent, versions prior to DDMA 26.05, contain an Improper Link Resolution Before File Access ('Link Following’) vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Elevation of Privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: mediatek-gen3: Prevent leaking IRQ domains when IRQ not found
In mtk_pcie_setup_irq(), the IRQ domains are allocated before the
controller's IRQ is fetched. If the latter fails, the function
directly returns an error, without cleaning up the allocated domains.
Hence, reverse the order so that the IRQ domains are allocated after the
controller's IRQ is found.
This was flagged by Sashiko during a review of "[PATCH v6 0/7] PCI:
mediatek-gen3: add power control support". |
| In the Linux kernel, the following vulnerability has been resolved:
net: garp: fix unsigned integer underflow in garp_pdu_parse_attr
The receive-side GARP attribute parser computes dlen with reversed
operands:
dlen = sizeof(*ga) - ga->len;
ga->len is the on-wire attribute length and includes the GARP attribute
header. For normal attributes with data, ga->len is larger than
sizeof(*ga), so the subtraction underflows in unsigned arithmetic.
The resulting value is later passed to garp_attr_lookup(), whose length
argument is u8. After truncation, the parsed data length usually no
longer matches the length stored for locally registered attributes, so
received Join/Leave events are ignored. This breaks the GARP receive path
for common attributes, such as GVRP VLAN registration attributes.
Compute the data length as the attribute length minus the header length. |
| The WPForms – AI Form Builder for WordPress – Contact Forms, Payment Forms, Survey Form, Quiz & More plugin for WordPress is vulnerable to Stored Cross-Site Scripting via OptinMonster Integration data-sitekey Attribute in Post Content in all versions up to, and including, 2.0.0.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires the OptinMonster plugin to be installed and configured with an active inline campaign that outputs matching #om-{id} markup on the target page, as the WPForms handler only fires when OptinMonster emits its 'om.Campaign.load' event. |
| In Microsoft Azure API Management through 2025-10-17, when self-service signup (username/password Basic Authentication) is enabled in Tenant A, an attacker can reuse the registration flow by changing the hostname or tenant identifier to Tenant B, even when Tenant B has signup disabled at the UI level. In other words, disabling signup in the UI does not disable the underlying API endpoint (which still accepts cross-tenant requests based on the Host header). NOTE: The supplier states that they evaluated the report and determined it did not cross a security boundary (i.e., the observed behavior was a configuration/state issue rather than an exploitable product vulnerability affecting tenant isolation). NOTE: The supplier evaluated this report and determined that it did not cross a security boundary (i.e., the observed behavior was a configuration/state issue rather than an exploitable product vulnerability affecting tenant isolation). |
| HCL DevOps Plan is potentially susceptible to Cross-Site Scripting (XSS) which could allow an attacker to exploit this vulnerability if certain browser weaknesses are present. |
| Missing Cryptographic Step (CWE-325) vulnerability exists in certain FeliCa IC chips shipped in or before 2017. If the vulnerability is exploited, information stored in the IC chip may be read or tampered with. |
