| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the HTTP web interface for Cisco Wide Area Application Services (WAAS) could allow an unauthenticated, remote attacker to cause an HTTP Application Optimization (AO) related process to restart, causing a partial denial of service (DoS) condition. The vulnerability is due to lack of input validation of user-supplied input parameters within an HTTP request. An attacker could exploit this vulnerability by sending a crafted HTTP request through the targeted device. An exploit could allow the attacker to cause a DoS condition due to a process unexpectedly restarting. The WAAS could drop traffic during the brief time the process is restarting. Cisco Bug IDs: CSCvc63048. |
| A vulnerability in the handling of IP fragments for the Cisco Small Business SPA300, SPA500, and SPA51x Series IP Phones could allow an unauthenticated, remote attacker to cause the device to reload unexpectedly, resulting in a denial of service (DoS) condition. The vulnerability is due to the inability to handle many large IP fragments for reassembly in a short duration. An attacker could exploit this vulnerability by sending a crafted stream of IP fragments to the targeted device. An exploit could allow the attacker to cause a DoS condition when the device unexpectedly reloads. Cisco Bug IDs: CSCve82586. |
| A vulnerability in the web-based management interface of Cisco Firepower Management Center could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvc50771. |
| A vulnerability in the General Packet Radio Service (GPRS) Tunneling Protocol ingress packet handler of Cisco ASR 5500 System Architecture Evolution (SAE) Gateways could allow an unauthenticated, remote attacker to cause a partial denial of service (DoS) condition on an affected device. The vulnerability is due to improper input validation of GPRS Tunneling Protocol packet headers. An attacker could exploit this vulnerability by sending a malformed GPRS Tunneling Protocol packet to an affected device. A successful exploit could allow the attacker to cause the GTPUMGR process on an affected device to restart unexpectedly, resulting in a partial DoS condition. If the GTPUMGR process restarts, there could be a brief impact on traffic passing through the device. Cisco Bug IDs: CSCve07119. |
| A vulnerability in the web-based user interface of Cisco SocialMiner could allow an unauthenticated, remote attacker to have read and write access to information stored in the affected system. The vulnerability is due to improper handling of XML External Entity (XXE) entries when parsing an XML file. An attacker could exploit this vulnerability by convincing the administrator of an affected system to import a crafted XML file with malicious entries, which could allow the attacker to read and write files and execute remote code within the application. Cisco Bug IDs: CSCvf47946. |
| A vulnerability in the malware detection functionality within Advanced Malware Protection (AMP) of Cisco AsyncOS Software for Cisco Email Security Appliances (ESAs) could allow an unauthenticated, remote attacker to cause an email attachment containing malware to be delivered to the end user. The vulnerability is due to the failure of AMP to scan certain EML attachments that could contain malware. An attacker could exploit this vulnerability by sending an email with a crafted EML attachment through the targeted device. A successful exploit could allow the attacker to bypass the configured ESA email message and content filtering and allow the malware to be delivered to the end user. Vulnerable Products: This vulnerability affects Cisco AsyncOS Software for Cisco ESA, both virtual and hardware appliances, that are configured with message or content filters to scan incoming email attachments on the ESA. Cisco Bug IDs: CSCuz81533. |
| A vulnerability in the wireless controller manager of Cisco IOS XE could allow an unauthenticated, adjacent attacker to cause a restart of the switch and result in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by submitting a crafted association request. An exploit could allow the attacker to cause the switch to restart. This vulnerability affects Cisco Catalyst 3650 and 3850 switches running IOS XE Software versions 16.1 through 16.3.3, and acting as wireless LAN controllers (WLC). Cisco Bug IDs: CSCvd45069. |
| A vulnerability in the web framework of Cisco Unity Connection could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting (XSS) attack against a user of the web interface of an affected system. The vulnerability is due to insufficient input validation of certain parameters that are passed to the affected software via the HTTP GET and HTTP POST methods. An attacker who can convince a user to follow an attacker-supplied link could execute arbitrary script or HTML code in the user's browser in the context of an affected site. Known Affected Releases 10.5(2). Cisco Bug IDs: CSCvf25345. |
| A vulnerability in the dynamic access control list (ACL) feature of Cisco IOS XE Software running on Cisco Catalyst 4000 Series Switches could allow an unauthenticated, adjacent attacker to cause dynamic ACL assignment to fail and the port to fail open. This could allow the attacker to pass traffic to the default VLAN of the affected port. The vulnerability is due to an uncaught error condition that may occur during the reassignment of the auth-default-ACL dynamic ACL to a switch port after 802.1x authentication fails. A successful exploit of this issue could allow a physically adjacent attacker to bypass 802.1x authentication and cause the affected port to fail open, allowing the attacker to pass traffic to the default VLAN of the affected switch port. Cisco Bug IDs: CSCvc72751. |
| A vulnerability in the Operations, Administration, Maintenance, and Provisioning (OAMP) credential reset functionality for Cisco Unified Customer Voice Portal (CVP) could allow an authenticated, remote attacker to gain elevated privileges. The vulnerability is due to a lack of proper input validation. An attacker could exploit this vulnerability by authenticating to the OAMP and sending a crafted HTTP request. A successful exploit could allow the attacker to gain administrator privileges. The attacker must successfully authenticate to the system to exploit this vulnerability. This vulnerability affects Cisco Unified Customer Voice Portal (CVP) running software release 10.5, 11.0, or 11.5. Cisco Bug IDs: CSCve92752. |
| A vulnerability in the ROM Monitor (ROMMON) code of Cisco IR800 Integrated Services Router Software could allow an unauthenticated, local attacker to boot an unsigned Hypervisor on an affected device and compromise the integrity of the system. The vulnerability is due to insufficient sanitization of user input. An attacker who can access an affected router via the console could exploit this vulnerability by entering ROMMON mode and modifying ROMMON variables. A successful exploit could allow the attacker to execute arbitrary code and install a malicious version of Hypervisor firmware on an affected device. Cisco Bug IDs: CSCvb44027. |
| A vulnerability in the web console of the Cisco Cloud Services Platform (CSP) 2100 could allow an authenticated, remote attacker to interact maliciously with the services or virtual machines (VMs) operating remotely on an affected CSP device. The vulnerability is due to weaknesses in the generation of certain authentication mechanisms in the URL of the web console. An attacker could exploit this vulnerability by browsing to one of the hosted VMs' URLs in Cisco CSP and viewing specific patterns that control the web application's mechanisms for authentication control. An exploit could allow the attacker to access a specific VM on the CSP, which causes a complete loss of the system's confidentiality, integrity, and availability. This vulnerability affects Cisco Cloud Services Platform (CSP) 2100 running software release 2.1.0, 2.1.1, 2.1.2, 2.2.0, 2.2.1, or 2.2.2. Cisco Bug IDs: CSCve64690. |
| A vulnerability in the IPsec component of Cisco StarOS for Cisco ASR 5000 Series Routers could allow an unauthenticated, remote attacker to terminate all active IPsec VPN tunnels and prevent new tunnels from establishing, resulting in a denial of service (DoS) condition. Affected Products: ASR 5000 Series Routers, Virtualized Packet Core (VPC) Software. More Information: CSCvc21129. Known Affected Releases: 21.1.0 21.1.M0.65601 21.1.v0. Known Fixed Releases: 21.2.A0.65754 21.1.b0.66164 21.1.V0.66014 21.1.R0.65759 21.1.M0.65749 21.1.0.66030 21.1.0. |
| A vulnerability in the Border Gateway Protocol (BGP) Bidirectional Forwarding Detection (BFD) implementation of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to bypass the access control list (ACL) for specific TCP and UDP traffic. More Information: CSCvc68229. Known Affected Releases: 9.6(2). Known Fixed Releases: 99.1(20.1) 99.1(10.2) 98.1(12.7) 98.1(1.49) 97.1(6.58) 97.1(0.134) 96.2(0.109) 9.7(1.1) 9.6(2.99) 9.6(2.8). |
| A vulnerability in the web-based management interface of Cisco UCS Director could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. More Information: CSCvc44344. Known Affected Releases: 6.0(0.0). |
| On Cisco DDR2200 ADSL2+ Residential Gateway DDR2200B-NA-AnnexA-FCC-V00.00.03.45.4E and DDR2201v1 ADSL2+ Residential Gateway DDR2201v1-NA-AnnexA-FCC-V00.00.03.28.3 devices, there is remote command execution via shell metacharacters in the pingAddr parameter to the waitPingqry.cgi URI. The command output is visible at /PingMsg.cmd. |
| An untrusted search path (aka DLL Preload) vulnerability in the Cisco Network Academy Packet Tracer software could allow an authenticated, local attacker to execute arbitrary code via DLL hijacking if a local user with administrative privileges executes the installer in the current working directory where a crafted DLL has been placed by an attacker. The vulnerability is due to incomplete input validation of path and file names of a DLL file before it is loaded. An attacker could exploit this vulnerability by creating a malicious DLL file and installing it in a specific system directory. A successful exploit could allow the attacker to execute commands on the underlying Microsoft Windows host with privileges equivalent to the SYSTEM account. An attacker would need valid user credentials to exploit this vulnerability. |
| Multiple vulnerabilities in the EnergyWise module of Cisco IOS (12.2 and 15.0 through 15.6) and Cisco IOS XE (3.2 through 3.18) could allow an unauthenticated, remote attacker to cause a buffer overflow condition or a reload of an affected device, leading to a denial of service (DoS) condition. These vulnerabilities are due to improper parsing of crafted EnergyWise packets destined to an affected device. An attacker could exploit these vulnerabilities by sending crafted EnergyWise packets to be processed by an affected device. An exploit could allow the attacker to cause a buffer overflow condition or a reload of the affected device, leading to a DoS condition. Cisco IOS Software and Cisco IOS XE Software support EnergyWise for IPv4 communication. Only IPv4 packets destined to a device configured as an EnergyWise domain member can trigger these vulnerabilities. IPv6 packets cannot be used to trigger these vulnerabilities. Cisco Bug ID CSCuu76493. |
| A vulnerability in Cisco NX-OS System Software patch installation could allow an authenticated, local attacker to write a file to arbitrary locations. The vulnerability is due to insufficient restrictions in the patch installation process. An attacker could exploit this vulnerability by installing a crafted patch image on an affected device. The vulnerable operation occurs prior to patch activation. An exploit could allow the attacker to write arbitrary files on an affected system as root. The attacker would need valid administrator credentials to perform this exploit. This vulnerability affects the following products running Cisco NX-OS System Software: Multilayer Director Switches, Nexus 2000 Series Fabric Extenders, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Unified Computing System Manager. Cisco Bug IDs: CSCvf16513, CSCvf23794, CSCvf23832. |
| A vulnerability in the DHCP code for the Zero Touch Provisioning feature of Cisco ASR 920 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a format string vulnerability when processing a crafted DHCP packet for Zero Touch Provisioning. An attacker could exploit this vulnerability by sending a specially crafted DHCP packet to an affected device. An exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco ASR 920 Series Aggregation Services Routers that are running an affected release of Cisco IOS XE Software (3.13 through 3.18) and are listening on the DHCP server port. By default, the devices do not listen on the DHCP server port. Cisco Bug IDs: CSCuy56385. |
