| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Session Initiation Protocol (SIP) on the Cisco TelePresence Video Communication Server (VCS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the targeted appliance. The vulnerability is due to excessive SIP traffic sent to the device. An attacker could exploit this vulnerability by transmitting large volumes of SIP traffic to the VCS. An exploit could allow the attacker to cause a complete DoS condition on the targeted system. Cisco Bug IDs: CSCve32897. |
| A vulnerability in configuration modification permissions validation for Cisco Unified Communications Manager could allow an authenticated, remote attacker to perform a horizontal privilege escalation where one user can modify another user's configuration. The vulnerability is due to lack of proper Role Based Access Control (RBAC) when certain user configuration changes are requested. An attacker could exploit this vulnerability by sending an authenticated, crafted HTTP request to the targeted application. An exploit could allow the attacker to impact the integrity of the application where one user can modify the configuration of another user's information. Cisco Bug IDs: CSCve27331. Known Affected Releases: 10.5(2.10000.5), 11.0(1.10000.10), 11.5(1.10000.6). |
| A vulnerability in the web interface of the Cisco RV340, RV345, and RV345P Dual WAN Gigabit VPN Routers could allow an unauthenticated, remote attacker to access sensitive data. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to Cisco WebEx Meetings not sufficiently protecting sensitive data when responding to an HTTP request to the web interface. An attacker could exploit the vulnerability by attempting to use the HTTP protocol and looking at the data in the HTTP responses from the Cisco WebEx Meetings Server. An exploit could allow the attacker to find sensitive information about the application. Cisco Bug IDs: CSCve37988. Known Affected Releases: firmware 1.0.0.30, 1.0.0.33, 1.0.1.9, 1.0.1.16. |
| A vulnerability in the management of shell user accounts for Cisco Policy Suite (CPS) Software for CPS appliances could allow an authenticated, local attacker to gain elevated privileges on an affected system. The affected privilege level is not at the root level. The vulnerability is due to incorrect role-based access control (RBAC) for shell user accounts. An attacker could exploit this vulnerability by authenticating to an affected appliance and providing crafted user input via the CLI. A successful exploit could allow the attacker to acquire a higher privilege level than should have been granted. To exploit this vulnerability, the attacker must log in to the appliance with valid credentials. Cisco Bug IDs: CSCve37724. Known Affected Releases: 9.0.0, 9.1.0, 10.0.0, 11.0.0, 12.0.0. |
| A vulnerability in the web framework of Cisco Elastic Services Controller (ESC) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web interface. The vulnerability is due to insufficient validation of user-supplied input by the affected software. An attacker could exploit this vulnerability by convincing a user to access a malicious link or by intercepting a user request and injecting malicious code into the request. An exploit could allow the attacker to execute arbitrary script code in the context of the affected site or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCvd76324. Known Affected Releases: 2.2(9.76) and 2.3(1). |
| A vulnerability in the CLI of Cisco ASR 5000 Series Aggregated Services Routers running the Cisco StarOS operating system could allow an authenticated, local attacker to elevate their privileges to admin-level privileges. The vulnerability is due to incorrect permissions that are given to a set of users. An attacker could exploit this vulnerability by logging in to the shell of an affected device and elevating their privileges by modifying environment variables. An exploit could allow the attacker to gain admin-level privileges and take control of the affected device. Cisco Bug IDs: CSCvd47741. Known Affected Releases: 21.0.v0.65839. |
| A vulnerability in the build procedure for certain executable system files installed at boot time on Cisco Application Policy Infrastructure Controller (APIC) devices could allow an authenticated, local attacker to gain root-level privileges. The vulnerability is due to a custom executable system file that was built to use relative search paths for libraries without properly validating the library to be loaded. An attacker could exploit this vulnerability by authenticating to the device and loading a malicious library that can escalate the privilege level. A successful exploit could allow the attacker to gain root-level privileges and take full control of the device. The attacker must have valid user credentials to log in to the device. Cisco Bug IDs: CSCvc96087. Known Affected Releases: 1.1(0.920a), 1.1(1j), 1.1(3f); 1.2 Base, 1.2(2), 1.2(3), 1.2.2; 1.3(1), 1.3(2), 1.3(2f); 2.0 Base, 2.0(1). |
| A vulnerability in Cisco Application Policy Infrastructure Controller (APIC) could allow an authenticated, remote attacker to gain higher privileges than the account is assigned. The attacker will be granted the privileges of the last user to log in, regardless of whether those privileges are higher or lower than what should have been granted. The attacker cannot gain root-level privileges. The vulnerability is due to a limitation with how Role-Based Access Control (RBAC) grants privileges to remotely authenticated users when login occurs via SSH directly to the local management interface of the APIC. An attacker could exploit this vulnerability by authenticating to the targeted device. The attacker's privilege level will be modified to match that of the last user to log in via SSH. An exploit could allow the attacker to gain elevated privileges and perform CLI commands that should be restricted by the attacker's configured role. Cisco Bug IDs: CSCvc34335. Known Affected Releases: 1.0(1e), 1.0(1h), 1.0(1k), 1.0(1n), 1.0(2j), 1.0(2m), 1.0(3f), 1.0(3i), 1.0(3k), 1.0(3n), 1.0(4h), 1.0(4o); 1.1(0.920a), 1.1(1j), 1.1(3f); 1.2 Base, 1.2(2), 1.2(3), 1.2.2; 1.3(1), 1.3(2), 1.3(2f); 2.0 Base, 2.0(1). |
| A vulnerability in the Secure Sockets Layer (SSL) Decryption and Inspection feature of Cisco Firepower System Software 5.4.0, 5.4.1, 6.0.0, 6.1.0, 6.2.0, 6.2.1, and 6.2.2 could allow an unauthenticated, remote attacker to bypass the SSL policy for decrypting and inspecting traffic on an affected system. The vulnerability is due to unexpected interaction with Known Key and Decrypt and Resign configuration settings of SSL policies when the affected software receives unexpected SSL packet headers. An attacker could exploit this vulnerability by sending a crafted SSL packet through an affected device in a valid SSL session. A successful exploit could allow the attacker to bypass the SSL decryption and inspection policy for the affected system, which could allow traffic to flow through the system without being inspected. Cisco Bug IDs: CSCve12652. |
| A vulnerability in the implementation of the H.264 protocol in Cisco Meeting Server (CMS) 2.1.4 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected system. The vulnerability exists because the affected application does not properly validate Fragmentation Unit (FU-A) protocol packets. An attacker could exploit this vulnerability by sending a crafted H.264 FU-A packet through the affected application. A successful exploit could allow the attacker to cause a DoS condition on the affected system due to an unexpected restart of the CMS media process on the system. Although the CMS platform continues to operate and only the single, affected CMS media process is restarted, a brief interruption of media traffic for certain users could occur. Cisco Bug IDs: CSCve10131. |
| A vulnerability in the web-based management interface of Cisco Jabber Guest Server 10.6(9), 11.0(0), and 11.0(1) could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of the affected software. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of the affected software. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information. Cisco Bug IDs: CSCve09718. |
| A vulnerability in the web framework of Cisco Unified Communications Manager 11.5(1.10000.6) could allow an authenticated, remote attacker to access arbitrary files in the context of the web root directory structure on an affected device. The vulnerability is due to insufficient input validation by the affected software. An attacker could exploit this vulnerability by using directory traversal techniques to read files in the web root directory structure on the Cisco Unified Communications Manager filesystem. Cisco Bug IDs: CSCve13796. |
| A vulnerability in the Web UI Application of the Cisco Prime Collaboration Provisioning Tool through 12.2 could allow an unauthenticated, remote attacker to execute unwanted actions. The vulnerability is due to a lack of defense against cross-site request forgery (CSRF) attacks. An attacker could exploit this vulnerability by forcing the user's browser to perform any action authorized for that user. Cisco Bug IDs: CSCvc90280. |
| A vulnerability in the web-based management interface of the Cisco Smart Net Total Care (SNTC) Software Collector Appliance 3.11 could allow an authenticated, remote attacker to perform a read-only, blind SQL injection attack, which could allow the attacker to compromise the confidentiality of the system through SQL timing attacks. The vulnerability is due to insufficient input validation of certain user-supplied fields that are subsequently used by the affected software to build SQL queries. An attacker could exploit this vulnerability by submitting crafted URLs, which are designed to exploit the vulnerability, to the affected software. To execute an attack successfully, the attacker would need to submit a number of requests to the affected software. A successful exploit could allow the attacker to determine the presence of values in the SQL database of the affected software. Cisco Bug IDs: CSCvf07617. |
| A vulnerability in the web interface of the Cisco Adaptive Security Appliance (ASA) 9.3(3) and 9.6(2) could allow an unauthenticated, remote attacker to determine valid usernames. The attacker could use this information to conduct additional reconnaissance attacks. The vulnerability is due to the interaction between Lightweight Directory Access Protocol (LDAP) and SSL Connection Profile when they are configured together. An attacker could exploit the vulnerability by performing a username enumeration attack to the IP address of the device. An exploit could allow the attacker to determine valid usernames. Cisco Bug IDs: CSCvd47888. |
| A vulnerability in the CLI parser of the Cisco Web Security Appliance (WSA) could allow an authenticated, local attacker to perform command injection and elevate privileges to root. The attacker must authenticate with valid operator-level or administrator-level credentials. Affected Products: virtual and hardware versions of Cisco Web Security Appliance (WSA). More Information: CSCvd88855. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270 10.1.1-234. |
| A vulnerability in the authentication module of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass local authentication. The vulnerability is due to improper handling of authentication requests and policy assignment for externally authenticated users. An attacker could exploit this vulnerability by authenticating with a valid external user account that matches an internal username and incorrectly receiving the authorization policy of the internal account. An exploit could allow the attacker to have Super Admin privileges for the ISE Admin portal. This vulnerability does not affect endpoints authenticating to the ISE. The vulnerability affects Cisco ISE, Cisco ISE Express, and Cisco ISE Virtual Appliance running Release 1.3, 1.4, 2.0.0, 2.0.1, or 2.1.0. Release 2.2.x is not affected. Cisco Bug IDs: CSCvb10995. |
| A vulnerability in the web interface of the Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to perform command injection and elevate privileges to root. The attacker must authenticate with valid administrator credentials. Affected Products: Cisco AsyncOS Software 10.0 and later for WSA on both virtual and hardware appliances. More Information: CSCvd88862. Known Affected Releases: 10.1.0-204. Known Fixed Releases: 10.5.1-270 10.1.1-235. |
| A vulnerability in the cache server within Cisco Videoscape Distribution Suite (VDS) for Television 3.2(5)ES1 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on a targeted appliance. The vulnerability is due to excessive mapped connections exhausting the allotted resources within the system. An attacker could exploit this vulnerability by sending large amounts of inbound traffic to a device with the intention of overloading certain resources. A successful exploit could cause the device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCvc39260. |
| A vulnerability in the installation procedure for Cisco Prime Network Software could allow an authenticated, local attacker to elevate their privileges to root privileges. More Information: CSCvd47343. Known Affected Releases: 4.2(2.1)PP1 4.2(3.0)PP6 4.3(0.0)PP4 4.3(1.0)PP2. Known Fixed Releases: 4.3(2). |
