| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
binder: fix double-free in dbitmap
A process might fail to allocate a new bitmap when trying to expand its
proc->dmap. In that case, dbitmap_grow() fails and frees the old bitmap
via dbitmap_free(). However, the driver calls dbitmap_free() again when
the same process terminates, leading to a double-free error:
==================================================================
BUG: KASAN: double-free in binder_proc_dec_tmpref+0x2e0/0x55c
Free of addr ffff00000b7c1420 by task kworker/9:1/209
CPU: 9 UID: 0 PID: 209 Comm: kworker/9:1 Not tainted 6.17.0-rc6-dirty #5 PREEMPT
Hardware name: linux,dummy-virt (DT)
Workqueue: events binder_deferred_func
Call trace:
kfree+0x164/0x31c
binder_proc_dec_tmpref+0x2e0/0x55c
binder_deferred_func+0xc24/0x1120
process_one_work+0x520/0xba4
[...]
Allocated by task 448:
__kmalloc_noprof+0x178/0x3c0
bitmap_zalloc+0x24/0x30
binder_open+0x14c/0xc10
[...]
Freed by task 449:
kfree+0x184/0x31c
binder_inc_ref_for_node+0xb44/0xe44
binder_transaction+0x29b4/0x7fbc
binder_thread_write+0x1708/0x442c
binder_ioctl+0x1b50/0x2900
[...]
==================================================================
Fix this issue by marking proc->map NULL in dbitmap_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p: fix double req put in p9_fd_cancelled
Syzkaller reports a KASAN issue as below:
general protection fault, probably for non-canonical address 0xfbd59c0000000021: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0xdead000000000108-0xdead00000000010f]
CPU: 0 PID: 5083 Comm: syz-executor.2 Not tainted 6.1.134-syzkaller-00037-g855bd1d7d838 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:__list_del include/linux/list.h:114 [inline]
RIP: 0010:__list_del_entry include/linux/list.h:137 [inline]
RIP: 0010:list_del include/linux/list.h:148 [inline]
RIP: 0010:p9_fd_cancelled+0xe9/0x200 net/9p/trans_fd.c:734
Call Trace:
<TASK>
p9_client_flush+0x351/0x440 net/9p/client.c:614
p9_client_rpc+0xb6b/0xc70 net/9p/client.c:734
p9_client_version net/9p/client.c:920 [inline]
p9_client_create+0xb51/0x1240 net/9p/client.c:1027
v9fs_session_init+0x1f0/0x18f0 fs/9p/v9fs.c:408
v9fs_mount+0xba/0xcb0 fs/9p/vfs_super.c:126
legacy_get_tree+0x108/0x220 fs/fs_context.c:632
vfs_get_tree+0x8e/0x300 fs/super.c:1573
do_new_mount fs/namespace.c:3056 [inline]
path_mount+0x6a6/0x1e90 fs/namespace.c:3386
do_mount fs/namespace.c:3399 [inline]
__do_sys_mount fs/namespace.c:3607 [inline]
__se_sys_mount fs/namespace.c:3584 [inline]
__x64_sys_mount+0x283/0x300 fs/namespace.c:3584
do_syscall_x64 arch/x86/entry/common.c:51 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
This happens because of a race condition between:
- The 9p client sending an invalid flush request and later cleaning it up;
- The 9p client in p9_read_work() canceled all pending requests.
Thread 1 Thread 2
...
p9_client_create()
...
p9_fd_create()
...
p9_conn_create()
...
// start Thread 2
INIT_WORK(&m->rq, p9_read_work);
p9_read_work()
...
p9_client_rpc()
...
...
p9_conn_cancel()
...
spin_lock(&m->req_lock);
...
p9_fd_cancelled()
...
...
spin_unlock(&m->req_lock);
// status rewrite
p9_client_cb(m->client, req, REQ_STATUS_ERROR)
// first remove
list_del(&req->req_list);
...
spin_lock(&m->req_lock)
...
// second remove
list_del(&req->req_list);
spin_unlock(&m->req_lock)
...
Commit 74d6a5d56629 ("9p/trans_fd: Fix concurrency del of req_list in
p9_fd_cancelled/p9_read_work") fixes a concurrency issue in the 9p filesystem
client where the req_list could be deleted simultaneously by both
p9_read_work and p9_fd_cancelled functions, but for the case where req->status
equals REQ_STATUS_RCVD.
Update the check for req->status in p9_fd_cancelled to skip processing not
just received requests, but anything that is not SENT, as whatever
changed the state from SENT also removed the request from its list.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
[updated the check from status == RECV || status == ERROR to status != SENT] |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Don't (re)check L1 intercepts when completing userspace I/O
When completing emulation of instruction that generated a userspace exit
for I/O, don't recheck L1 intercepts as KVM has already finished that
phase of instruction execution, i.e. has already committed to allowing L2
to perform I/O. If L1 (or host userspace) modifies the I/O permission
bitmaps during the exit to userspace, KVM will treat the access as being
intercepted despite already having emulated the I/O access.
Pivot on EMULTYPE_NO_DECODE to detect that KVM is completing emulation.
Of the three users of EMULTYPE_NO_DECODE, only complete_emulated_io() (the
intended "recipient") can reach the code in question. gp_interception()'s
use is mutually exclusive with is_guest_mode(), and
complete_emulated_insn_gp() unconditionally pairs EMULTYPE_NO_DECODE with
EMULTYPE_SKIP.
The bad behavior was detected by a syzkaller program that toggles port I/O
interception during the userspace I/O exit, ultimately resulting in a WARN
on vcpu->arch.pio.count being non-zero due to KVM no completing emulation
of the I/O instruction.
WARNING: CPU: 23 PID: 1083 at arch/x86/kvm/x86.c:8039 emulator_pio_in_out+0x154/0x170 [kvm]
Modules linked in: kvm_intel kvm irqbypass
CPU: 23 UID: 1000 PID: 1083 Comm: repro Not tainted 6.16.0-rc5-c1610d2d66b1-next-vm #74 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:emulator_pio_in_out+0x154/0x170 [kvm]
PKRU: 55555554
Call Trace:
<TASK>
kvm_fast_pio+0xd6/0x1d0 [kvm]
vmx_handle_exit+0x149/0x610 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0xda8/0x1ac0 [kvm]
kvm_vcpu_ioctl+0x244/0x8c0 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0x5d/0xc60
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on node footer for non inode dnode
As syzbot reported below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/file.c:1243!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 5354 Comm: syz.0.0 Not tainted 6.17.0-rc1-syzkaller-00211-g90d970cade8e #0 PREEMPT(full)
RIP: 0010:f2fs_truncate_hole+0x69e/0x6c0 fs/f2fs/file.c:1243
Call Trace:
<TASK>
f2fs_punch_hole+0x2db/0x330 fs/f2fs/file.c:1306
f2fs_fallocate+0x546/0x990 fs/f2fs/file.c:2018
vfs_fallocate+0x666/0x7e0 fs/open.c:342
ksys_fallocate fs/open.c:366 [inline]
__do_sys_fallocate fs/open.c:371 [inline]
__se_sys_fallocate fs/open.c:369 [inline]
__x64_sys_fallocate+0xc0/0x110 fs/open.c:369
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f1e65f8ebe9
w/ a fuzzed image, f2fs may encounter panic due to it detects inconsistent
truncation range in direct node in f2fs_truncate_hole().
The root cause is: a non-inode dnode may has the same footer.ino and
footer.nid, so the dnode will be parsed as an inode, then ADDRS_PER_PAGE()
may return wrong blkaddr count which may be 923 typically, by chance,
dn.ofs_in_node is equal to 923, then count can be calculated to 0 in below
statement, later it will trigger panic w/ f2fs_bug_on(, count == 0 || ...).
count = min(end_offset - dn.ofs_in_node, pg_end - pg_start);
This patch introduces a new node_type NODE_TYPE_NON_INODE, then allowing
passing the new_type to sanity_check_node_footer in f2fs_get_node_folio()
to detect corruption that a non-inode dnode has the same footer.ino and
footer.nid.
Scripts to reproduce:
mkfs.f2fs -f /dev/vdb
mount /dev/vdb /mnt/f2fs
touch /mnt/f2fs/foo
touch /mnt/f2fs/bar
dd if=/dev/zero of=/mnt/f2fs/foo bs=1M count=8
umount /mnt/f2fs
inject.f2fs --node --mb i_nid --nid 4 --idx 0 --val 5 /dev/vdb
mount /dev/vdb /mnt/f2fs
xfs_io /mnt/f2fs/foo -c "fpunch 6984k 4k" |
| microCLAUDIA in v3.2.0 and prior has an improper access control vulnerability.
This flaw allows an authenticated user to perform unauthorized actions on other organizations' systems by sending direct API requests. To do so, the attacker can use organization identifiers obtained through a compromised endpoint or deduced manually.
This vulnerability allows access between tenants, enabling an attacker to list and manage remote assets, uninstall agents, and even delete vaccines configurations. |
| Improper locking vulnerability in Softing Industrial Automation GmbH gateways allows infected memory and/or resource leak exposure.This issue affects
smartLink HW-PN: from 1.02 through 1.03
smartLink HW-DP: 1.31 |
| Webserver crash caused by scanning on TCP port 80 in Softing Industrial Automation GmbH gateways and switch.This issue affects
smartLink HW-PN: from 1.02 through 1.03
smartLink HW-DP: 1.31 |
| A vulnerability was found in code-projects Food Ordering System 1.0. The impacted element is an unknown function of the file /admin/deleteitem.php. Performing manipulation of the argument itemID results in sql injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used. |
| A security flaw has been discovered in code-projects Simple Food Ordering System 1.0. This issue affects some unknown processing of the file /addproduct.php. Performing manipulation of the argument photo results in unrestricted upload. The attack may be initiated remotely. The exploit has been released to the public and may be exploited. |
| The HUSKY – Products Filter Professional for WooCommerce plugin for WordPress is vulnerable to blind SQL Injection via the `phrase` parameter in all versions up to, and including, 1.3.7.1 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The Auto Featured Image (Auto Post Thumbnail) plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 4.1.7 via the upload_to_library function. This makes it possible for authenticated attackers, with Author-level access and above, to make web requests to arbitrary locations originating from the web application and can be used to query and modify information from internal services. On Cloud instances, this issue allows for metadata retrieval. |
| Use of Hard-Coded Credentials issue exists in MZK-DP300N version 1.07 and earlier, which may allow an attacker within the local network to log in to the affected device via Telnet and execute arbitrary commands. |
| A unauthenticated reflected XSS vulnerability in VirtueMart 1.0.0-4.4.10 for Joomla was discovered. |
| A flaw was found in Keycloak. The Keycloak guides recommend to not expose /admin path to the outside in case the installation is using a proxy. The issue occurs at least via ha-proxy, as it can be tricked to using relative/non-normalized paths to access the /admin application path relative to /realms which is expected to be exposed. |
| IBM QRadar SIEM 7.5 through 7.5.0 Update Pack 13 Independent Fix 02 is vulnerable to privilege escalation due to improper privilege assignment to an update script. |
| Relative Path Traversal vulnerability in Apache Tomcat.
The fix for bug 60013 introduced a regression where the rewritten URL was normalized before it was decoded. This introduced the possibility that, for rewrite rules that rewrite query parameters to the URL, an attacker could manipulate the request URI to bypass security constraints including the protection for /WEB-INF/ and /META-INF/. If PUT requests were also enabled then malicious files could be uploaded leading to remote code execution. PUT requests are normally limited to trusted users and it is considered unlikely that PUT requests would be enabled in conjunction with a rewrite that manipulated the URI.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.10, from 10.1.0-M1 through 10.1.44, from 9.0.0.M11 through 9.0.108.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.6 though 8.5.100. Other, older, EOL versions may also be affected.
Users are recommended to upgrade to version 11.0.11 or later, 10.1.45 or later or 9.0.109 or later, which fix the issue. |
| A missing authorization vulnerability affecting DELMIA Apriso from Release 2020 through Release 2025 could allow an attacker to gain privileged access to the application. |
| An Improper Control of Generation of Code (Code Injection) vulnerability affecting DELMIA Apriso from Release 2020 through Release 2025 could allow an attacker to execute arbitrary code. |
| Docker Desktop Installer.exe is vulnerable to DLL hijacking due to insecure DLL search order. The installer searches for required DLLs in the user's Downloads folder before checking system directories, allowing local privilege escalation through malicious DLL placement.This issue affects Docker Desktop: through 4.48.0. |
| An authenticated admin user with access to both the management WebUI and command line interface on a Firebox can enable a diagnostic debug shell by uploading a platform and version-specific diagnostic package and executing a leftover diagnostic command.
This issue affects Fireware OS: from 12.0 before 12.11.2. |
