| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ECOVACS robot lawnmowers and vacuums insecurely store audio files used to indicate that the camera is on. An attacker with access to the /data filesystem can delete or modify warning files such that users may not be aware that the camera is on. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix WARN_ON in iommu probe path
Commit 1a75cc710b95 ("iommu/vt-d: Use rbtree to track iommu probed
devices") adds all devices probed by the iommu driver in a rbtree
indexed by the source ID of each device. It assumes that each device
has a unique source ID. This assumption is incorrect and the VT-d
spec doesn't state this requirement either.
The reason for using a rbtree to track devices is to look up the device
with PCI bus and devfunc in the paths of handling ATS invalidation time
out error and the PRI I/O page faults. Both are PCI ATS feature related.
Only track the devices that have PCI ATS capabilities in the rbtree to
avoid unnecessary WARN_ON in the iommu probe path. Otherwise, on some
platforms below kernel splat will be displayed and the iommu probe results
in failure.
WARNING: CPU: 3 PID: 166 at drivers/iommu/intel/iommu.c:158 intel_iommu_probe_device+0x319/0xd90
Call Trace:
<TASK>
? __warn+0x7e/0x180
? intel_iommu_probe_device+0x319/0xd90
? report_bug+0x1f8/0x200
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? intel_iommu_probe_device+0x319/0xd90
? debug_mutex_init+0x37/0x50
__iommu_probe_device+0xf2/0x4f0
iommu_probe_device+0x22/0x70
iommu_bus_notifier+0x1e/0x40
notifier_call_chain+0x46/0x150
blocking_notifier_call_chain+0x42/0x60
bus_notify+0x2f/0x50
device_add+0x5ed/0x7e0
platform_device_add+0xf5/0x240
mfd_add_devices+0x3f9/0x500
? preempt_count_add+0x4c/0xa0
? up_write+0xa2/0x1b0
? __debugfs_create_file+0xe3/0x150
intel_lpss_probe+0x49f/0x5b0
? pci_conf1_write+0xa3/0xf0
intel_lpss_pci_probe+0xcf/0x110 [intel_lpss_pci]
pci_device_probe+0x95/0x120
really_probe+0xd9/0x370
? __pfx___driver_attach+0x10/0x10
__driver_probe_device+0x73/0x150
driver_probe_device+0x19/0xa0
__driver_attach+0xb6/0x180
? __pfx___driver_attach+0x10/0x10
bus_for_each_dev+0x77/0xd0
bus_add_driver+0x114/0x210
driver_register+0x5b/0x110
? __pfx_intel_lpss_pci_driver_init+0x10/0x10 [intel_lpss_pci]
do_one_initcall+0x57/0x2b0
? kmalloc_trace+0x21e/0x280
? do_init_module+0x1e/0x210
do_init_module+0x5f/0x210
load_module+0x1d37/0x1fc0
? init_module_from_file+0x86/0xd0
init_module_from_file+0x86/0xd0
idempotent_init_module+0x17c/0x230
__x64_sys_finit_module+0x56/0xb0
do_syscall_64+0x6e/0x140
entry_SYSCALL_64_after_hwframe+0x71/0x79 |
| ECOVACS robot lawnmowers and vacuums use a deterministic root password generated based on model and serial number. An attacker with shell access can login as root. |
| An OS command injection vulnerability exists in various legacy D-Link routers—including DIR-300 rev B and DIR-600 (firmware ≤ 2.13 and ≤ 2.14b01, respectively)—due to improper input handling in the unauthenticated command.php endpoint. By sending specially crafted POST requests, a remote attacker can execute arbitrary shell commands with root privileges, allowing full takeover of the device. This includes launching services such as Telnet, exfiltrating credentials, modifying system configuration, and disrupting availability. The flaw stems from the lack of authentication and inadequate sanitation of the cmd parameter. |
| An OS command injection vulnerability exists in multiple D-Link routers—confirmed on DIR-300 rev A (v1.05) and DIR-615 rev D (v4.13)—via the authenticated tools_vct.xgi CGI endpoint. The web interface fails to properly sanitize user-supplied input in the pingIp parameter, allowing attackers with valid credentials to inject arbitrary shell commands. Exploitation enables full device compromise, including spawning a telnet daemon and establishing a root shell. The vulnerability is present in firmware versions that expose tools_vct.xgi and use the Mathopd/1.5p6 web server. No vendor patch is available, and affected models are end-of-life. |
| ECOVACS robot lawnmowers and vacuums are vulnerable to command injection via SetNetPin() over an unauthenticated BLE connection. |
| The cloud service used by ECOVACS robot lawnmowers and vacuums allows authenticated attackers to bypass the PIN entry required to access the live video feed. |
| ECOVACS HOME mobile app plugins for specific robots do not properly validate TLS certificates. An unauthenticated attacker can read or modify TLS traffic and obtain authentication tokens. |
| Free5gc 4.0.1 is vulnerable to Buffer Overflow. The AMF incorrectly validates the 5GS mobile identity, resulting in slice reference overflow. |
| An authentication bypass vulnerability exists in multiple WSO2 products when FIDO authentication is enabled. When a user account is deleted, the system does not automatically remove associated FIDO registration data. If a new user account is later created using the same username, the system may associate the new account with the previously registered FIDO device.
This flaw may allow a previously deleted user to authenticate using their FIDO credentials and impersonate the newly created user, resulting in unauthorized access. The vulnerability applies only to deployments that utilize FIDO-based authentication. |
| Insertion of Sensitive Information Into Sent Data vulnerability in Automattic WordPress allows Retrieve Embedded Sensitive Data.
The WordPress Core security team is aware of the issue and is already working on a fix. This is a low-severity vulnerability. Contributor-level privileges required in order to exploit it.
This issue affects WordPress: from n/a through 6.8.2 |
| A flaw was found in Libtiff. This vulnerability is a "write-what-where" condition, triggered when the library processes a specially crafted TIFF image file.
By providing an abnormally large image height value in the file's metadata, an attacker can trick the library into writing attacker-controlled color data to an arbitrary memory location. This memory corruption can be exploited to cause a denial of service (application crash) or to achieve arbitrary code execution with the permissions of the user. |
| There's a vulnerability in podman where an attacker may use the kube play command to overwrite host files when the kube file container a Secrete or a ConfigMap volume mount and such volume contains a symbolic link to a host file path. In a successful attack, the attacker can only control the target file to be overwritten but not the content to be written into the file.
Binary-Affected: podman
Upstream-version-introduced: v4.0.0
Upstream-version-fixed: v5.6.1 |
| Cross-site scripting (XSS) vulnerability in YzmCMS thru 7.3 via the referer header in the register page. |
| A cross-tenant authentication vulnerability exists in multiple WSO2 products due to improper cryptographic design in Adaptive Authentication. A single cryptographic key is used across all tenants to sign authentication cookies, allowing a privileged user in one tenant to forge authentication cookies for users in other tenants.
Because the Auto-Login feature is enabled by default, this flaw may allow an attacker to gain unauthorized access and potentially take over accounts in other tenants. Successful exploitation requires access to Adaptive Authentication functionality, which is typically restricted to high-privileged users. The vulnerability is only exploitable when Auto-Login is enabled, reducing its practical impact in deployments where the feature is disabled. |
| A content spoofing vulnerability exists in multiple WSO2 products due to improper error message handling. Under certain conditions, error messages are passed through URL parameters without validation, allowing malicious actors to inject arbitrary content into the UI.
By exploiting this vulnerability, attackers can manipulate browser-displayed error messages, enabling social engineering attacks through deceptive or misleading content. |
| A reflected cross-site scripting (XSS) vulnerability exists in the account registration flow of WSO2 Identity Server due to improper output encoding. A malicious actor can exploit this vulnerability by injecting a crafted payload that is reflected in the server response, enabling the execution of arbitrary JavaScript in the victim's browser.
This vulnerability could allow attackers to redirect users to malicious websites, modify the user interface, or exfiltrate data from the browser. However, session-related sensitive cookies are protected using the httpOnly flag, which mitigates the risk of session hijacking. |
| ECOVACS robot vacuums and base stations communicate via an insecure Wi-Fi network with a deterministic AES encryption key, which can be easily derived. |
| ECOVACS vacuum robot base stations do not validate firmware updates, so malicious over-the-air updates can be sent to base station via insecure connection between robot and base station. |
| An authenticated OS command injection vulnerability exists in various D-Link routers (tested on DIR-615H1 running firmware version 8.04) via the tools_vct.htm endpoint. The web interface fails to sanitize input passed from the ping_ipaddr parameter to the tools_vct.htm diagnostic interface, allowing attackers to inject arbitrary shell commands using backtick encapsulation. With default credentials, an attacker can exploit this blind injection vector to execute arbitrary commands. |
