| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the Module Manager lets a user-mode, memory-protected module post a forged callback request to another module's callback request queue. The receiving module's callback thread calls the function pointer in the request without checking that the Module Manager sent it, so the attacker's code runs with the receiving module's privilege; when that module runs in privileged mode, a user-mode module gains privileged execution. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, ThreadX Modules does not revoke a module's trace-buffer-full callback when the module is stopped and unloaded. With event tracing enabled and a kernel-owned trace buffer still active, a later buffer wrap invokes the callback from privileged thread context after the module's code has been released, so a user-mode module can have its code run with kernel privileges after unload, or, once the memory is reused, redirect control flow or cause a fault. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the four non-secure-callable secure stack functions of the TrustZone-M ports dereference a thread pointer supplied by the non-secure world without checking that it points to non-secure memory. Non-secure code can make the secure firmware reveal which secure bytes are zero, write chosen secure words, and fault the secure world, breaking TrustZone-M isolation and enabling recovery of secure-world secrets such as cryptographic keys. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, built with TX_ENABLE_EVENT_TRACE, the Module Manager lets a user-mode, memory-protected module register any function pointer as the kernel's trace-buffer-full callback, which the kernel calls from privileged code when the trace buffer wraps. A malicious module can thereby run its own code with kernel privilege, defeating module isolation, or fault the kernel with an invalid pointer. |
| In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the NetX Secure DTLS server allocates a session from its fixed session pool for the first datagram from any unrecognised address and port, before the cookie exchange, and never releases a session whose handshake stalls. A remote, unauthenticated attacker can exhaust the pool with one spoofed datagram per source and deny DTLS service to legitimate clients until the application resets the sessions. |
| In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, built with BSD raw socket and IPv6 support, the IPv6 raw send path uses the destination-table entry it adds without checking that the add succeeded. When the destination table is full and an off-link destination is reached through a default router whose neighbour cache entry is unknown, sending on an IPv6 raw socket with header inclusion dereferences a NULL pointer; a remote sender can fill the table, for example with ICMPv6 Packet Too Big messages, and crash the sending thread. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the Module Manager loaders return an overflow error without releasing the Module Manager mutex when a module preamble declares a data or stack size that overflows the allocation arithmetic. Loading such an image blocks every later module load, start, stop and unload from other threads until the system is reset. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the Module Manager's thread-control services do not check that a thread passed by a user-mode, memory-protected module belongs to that module. Any loaded module can suspend, resume, terminate, reset or re-prioritise application threads and other modules' threads and abort their waits, denying service or changing how the system schedules them. |
| In Eclipse ThreadX versions 6.0.1 through 6.5.2.202603, the PendSV handler of the Cortex-M module ports saves a preempted user-mode module thread's registers in privileged mode at addresses taken from the thread's stack pointer, without checking that pointer against the thread's stack. A user-mode, memory-protected module can thereby write up to nine words, eight of its choosing, or 25 with floating-point state, into memory immediately below any region it may write, and read back what is stored there. |
| In Eclipse ThreadX NetX Duo versions 6.4.5.202504 through 6.5.2.202603a, built with IPv6 path MTU discovery, the ICMPv6 Packet Too Big handler uses the destination-table entry it adds without checking that the add succeeded. A sender on the network can fill the destination table with Packet Too Big messages quoting new destinations, after which the next message makes the IP helper thread dereference a NULL pointer, crashing it on targets that fault on address 0 and stopping all network processing. |
| The PNG chunk reader has no notion of chunk ordering. It records whether an IDAT has been seen and whether a tRNS has already supplied transparency, but nothing prevents an IHDR being read a second time.
A PNG carries exactly one IHDR and it is the first chunk. A file that places a second one after IDAT rewrites the image width, height, bit depth and pixel depth *after* the decoded-data buffer has already been allocated and filled from the original values. The pass that reverses the PNG row filters then derives its own extent from the new dimensions and walks the old allocation, moving image bytes past the end of it.
The buffer is allocated by GUIX rather than supplied by the caller, so the application has no way to size it defensively. The decoder is compiled in by default. |
| `_gx_binres_pixelmap_table_load()` in the GUIX binary resource (theme) loader indexes the pixelmap table with a value read verbatim from the resource file and never bounds it against the table size. A crafted theme drives a write of up to roughly 256 KB past the end of the table.
The overflowed buffer is allocated by GUIX itself, through `_gx_system_memory_allocator`, rather than supplied by the caller, so the loader corrupts its own arena. The public API `gx_binres_theme_load()` takes no size parameter, so no amount of caller diligence prevents this.
Reproduces in the shipped default configuration; `GX_BINARY_RESOURCE_SUPPORT` is enabled by default. |
| `gx_binres_theme_load()` and `gx_binres_font_load()` take the resource as a bare `GX_UBYTE *` with no length, and `GX_BINRES_DATA_INFO` has no field to carry one. Every read is therefore performed at an offset the file itself chose, against a buffer whose extent the loader does not know. A resource that declares more data than it contains is read past its end, and an offset stored in the file is turned into a pointer without being bounded.
This is a distinct defect from GHSA-hgcj-22cg-4hfv, which was an underflowed glyph count. It needs no underflow and no wrapped multiply: a perfectly well-formed, narrow glyph range reaches it. |
| The GUIX binary resource loader never checks that a font page's glyph range is well formed. `gx_page_header_first_glyph` and `gx_page_header_last_glyph` are read verbatim from the file and only the upper bound of `last_glyph` is validated, so a page declaring `first_glyph > last_glyph` makes `last - first + 1` underflow to a very large unsigned count.
That count is multiplied by a glyph record size to reserve the load buffer, and the multiply is unchecked, so it wraps to a small value and the loader allocates a buffer far smaller than the data it is about to write. The load pass then recomputes the count in a narrower type and writes attacker-controlled glyph records into the undersized buffer. |
| The GUIX JPEG software decoder enforces no ordering on JPEG markers. A file that places a second `SOF0` frame header after `SOS` re-runs the frame header parser after the output buffer has already been allocated and its geometry latched. The decoder returns `GX_SUCCESS` and publishes a `GX_PIXELMAP` whose reported dimensions and `data_size` exceed the allocation behind it.
Any consumer that trusts the returned structure reads out of bounds, including GUIX's own display drivers, reached through the ordinary draw path.
Reproduces in the shipped default configuration; `GX_SOFTWARE_DECODER_SUPPORT` is enabled by default. |
| The GUIX software JPEG decoder reads four kinds of marker segment without checking that each is long enough to hold what it reads. A truncated segment is therefore read past the end of the caller's image buffer. Separately, a zero chroma sampling factor makes the block decode loop non-terminating. Both reproduce in the default configuration, in which `GX_SOFTWARE_DECODER_SUPPORT` is enabled. |
| `_gx_multi_line_text_view_display_info_get()` reads one byte past the end of the application's text buffer when the string it is given ends with a carriage return (`\r`). The over-read can also cause callers to advance their index past the end of the string, producing a second over-read in `_gx_multi_line_text_view_string_total_rows_compute()` and a row of text that is not in the source. |
| Mounting an attacker-controlled FAT image with fault tolerance enabled causes an out-of-bounds heap write during log replay. The write is attacker-positioned and attacker-valued, and on a common embedded memory layout it reaches the FX_MEDIA driver callback, giving control of the instruction pointer. |
| A HID report descriptor is a sequence of items, each declaring in its header how many data bytes follow. The USBX host walks that sequence by advancing over each header and parsing the data behind it.
The walk checked that an item fitted in the descriptor only **after** it had advanced past the header and parsed the payload, and the item analysis it relied on never measured the declared sizes against the bytes actually received. A HID peripheral returning a short report descriptor therefore drove a heap out-of-bounds read during ordinary enumeration. |
| A VideoStreaming interface reports the size of its whole class-specific descriptor block in the `wTotalLength` field of its input header. The USBX host recorded that figure and used it as the budget for walking the format, frame and frame-interval descriptors, without holding it against the configuration descriptor actually received.
A device that reports a `wTotalLength` larger than the descriptors it supplies therefore had its own claim believed. Once the real bytes ran out the walk kept going, dereferencing the cursor past the end of the configuration buffer, in the host's context, whenever the application queried format or frame data. |
