| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Early versions of Operator-SDK provided an insecure method to allow operator containers to run in environments that used a random UID. Operator-SDK before 0.15.2 provided a script, user_setup, which modifies the permissions of the /etc/passwd file to 664 during build time. Developers who used Operator-SDK before 0.15.2 to scaffold their operator may still be impacted by this if the insecure user_setup script is still being used to build new container images.
In affected images, the /etc/passwd file is created during build time with group-writable permissions and a group ownership of root (gid=0). An attacker who can execute commands within an affected container, even as a non-root user, may be able to leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container. |
| A vulnerability was identified in TOZED ZLT T10 T10PLUS_3.04.15. The affected element is an unknown function of the file /reqproc/proc_post of the component Reboot Handler. Such manipulation leads to denial of service. Access to the local network is required for this attack to succeed. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: rng - Ensure set_ent is always present
Ensure that set_ent is always set since only drbg provides it. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: qcom-geni: Fix blocked task
Revert commit 1afa70632c39 ("serial: qcom-geni: Enable PM runtime for
serial driver") and its dependent commit 86fa39dd6fb7 ("serial:
qcom-geni: Enable Serial on SA8255p Qualcomm platforms") because the
first one causes regression - hang task on Qualcomm RB1 board (QRB2210)
and unable to use serial at all during normal boot:
INFO: task kworker/u16:0:12 blocked for more than 42 seconds.
Not tainted 6.17.0-rc1-00004-g53e760d89498 #9
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u16:0 state:D stack:0 pid:12 tgid:12 ppid:2 task_flags:0x4208060 flags:0x00000010
Workqueue: async async_run_entry_fn
Call trace:
__switch_to+0xe8/0x1a0 (T)
__schedule+0x290/0x7c0
schedule+0x34/0x118
rpm_resume+0x14c/0x66c
rpm_resume+0x2a4/0x66c
rpm_resume+0x2a4/0x66c
rpm_resume+0x2a4/0x66c
__pm_runtime_resume+0x50/0x9c
__driver_probe_device+0x58/0x120
driver_probe_device+0x3c/0x154
__driver_attach_async_helper+0x4c/0xc0
async_run_entry_fn+0x34/0xe0
process_one_work+0x148/0x290
worker_thread+0x2c4/0x3e0
kthread+0x118/0x1c0
ret_from_fork+0x10/0x20
The issue was reported on 12th of August and was ignored by author of
commits introducing issue for two weeks. Only after complaining author
produced a fix which did not work, so if original commits cannot be
reliably fixed for 5 weeks, they obviously are buggy and need to be
dropped. |
| Adobe Commerce versions 2.4.9-alpha2, 2.4.8-p2, 2.4.7-p7, 2.4.6-p12, 2.4.5-p14, 2.4.4-p15 and earlier are affected by an Improper Input Validation vulnerability. A successful attacker can abuse this to achieve session takeover, increasing the confidentiality, and integrity impact to high. Exploitation of this issue does not require user interaction. |
| A vulnerability was determined in Sangfor Operation and Maintenance Security Management System 3.0. Impacted is an unknown function of the file /fort/portal_login of the component Frontend. This manipulation of the argument loginUrl causes command injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. Upgrading to version 3.0.11 and 3.0.12 is recommended to address this issue. It is advisable to upgrade the affected component. |
| A vulnerability was found in 70mai X200 up to 20251019. This issue affects some unknown processing of the component Init Script Handler. The manipulation results in file inclusion. The attack requires a local approach. A high complexity level is associated with this attack. The exploitability is assessed as difficult. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in aaPanel BaoTa up to 11.1.0. This vulnerability affects unknown code of the file /database?action=GetDatabaseAccess of the component Backend. The manipulation of the argument Name leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in code-projects Responsive Hotel Site 1.0. This affects an unknown part of the file /admin/roomdel.php. Executing manipulation of the argument ID can lead to sql injection. It is possible to launch the attack remotely. The exploit has been published and may be used. |
| An issue was discovered in 5.1 before 5.1.14, 4.2 before 4.2.26, and 5.2 before 5.2.8.
The methods `QuerySet.filter()`, `QuerySet.exclude()`, and `QuerySet.get()`, and the class `Q()`, are subject to SQL injection when using a suitably crafted dictionary, with dictionary expansion, as the `_connector` argument.
Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected.
Django would like to thank cyberstan for reporting this issue. |
| The aThemes Addons for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the Call To Action widget in versions up to, and including, 1.1.5 due to insufficient input sanitization and output escaping on user-supplied values. This makes it possible for authenticated attackers with contributor-level and above permissions to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Saphali LiqPay for donate plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'saphali_liqpay' shortcode in all versions up to, and including, 1.0.2. This is due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Alex Reservations: Smart Restaurant Booking plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the /wp-json/srr/v1/app/upload/file REST endpoint in all versions up to, and including, 2.2.3. This makes it possible for authenticated attackers, with Administrator-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| The CYAN Backup plugin for WordPress is vulnerable to arbitrary file deletion due to insufficient file path validation in the 'delete' functionality in all versions up to, and including, 2.5.4. This makes it possible for authenticated attackers, with Administrator-level access and above, to delete arbitrary files on the server, which can easily lead to remote code execution when the right file is deleted (such as wp-config.php). |
| The Quick Featured Images plugin for WordPress is vulnerable to SQL Injection via the 'delete_orphaned' function in all versions up to, and including, 13.7.3 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Editor-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database, granted they can convince an author-level user or higher to add a malicious custom field value. |
| The Mail Mint plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the process_contact_attribute_import function in all versions up to, and including, 1.18.10. This makes it possible for authenticated attackers, with Administrator-level access and above, to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| The Gallery Plugin for WordPress – Envira Photo Gallery plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the '/envira-convert/v1/bulk-convert' REST API endpoint in all versions up to, and including, 1.11.0. This makes it possible for authenticated attackers, with contributor-level access and above, to convert galleries to Envira galleries. |
| A flaw was found in the mod_proxy_cluster in the Apache server. This issue may allow a malicious user to add a script in the 'alias' parameter in the URL to trigger the stored cross-site scripting (XSS) vulnerability. By adding a script on the alias parameter on the URL, it adds a new virtual host and adds the script to the cluster-manager page. |
| The Academy LMS – WordPress LMS Plugin for Complete eLearning Solution plugin for WordPress is vulnerable to PHP Object Injection in all versions up to, and including, 3.3.8 via deserialization of untrusted input in the 'import_all_courses' function. This makes it possible for authenticated attackers, with Administrator-level access and above, to inject a PHP Object. No known POP chain is present in the vulnerable software, which means this vulnerability has no impact unless another plugin or theme containing a POP chain is installed on the site. If a POP chain is present via an additional plugin or theme installed on the target system, it may allow the attacker to perform actions like delete arbitrary files, retrieve sensitive data, or execute code depending on the POP chain present. |
| The Academy LMS – WordPress LMS Plugin for Complete eLearning Solution plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.3.8 via the 'enqueue_social_login_script' function. This makes it possible for unauthenticated attackers to extract sensitive data including the Facebook App Secret if Facebook Social Login is enabled. |
