| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Pronetiqs IntraVUE versions 3.2.1a14 and prior have an inadequate encryption strength vulnerability which could allow an attacker to steal admin credentials via weak hash or a pass-the-hash attack. |
| HCL DFXServer is affected by an Unencrypted Communication vulnerability. The application permits users to establish connections over unencrypted channels via the HTTP protocol, which could allow a remote attacker to intercept network traffic and expose sensitive data transmitted between the user and the application. |
| clawvet self-hosted API server (apps/api) before 0.7.5 hard-codes a fallback JWT secret ('clawvet-dev-secret-change-me') in auth.ts and ships it as the default in .env.example. Because GET /api/v1/scans returns scan records containing userId values without authentication, a remote unauthenticated attacker can harvest a victim's userId, forge a valid HS256 cg_session cookie offline using the known secret, and call GET /api/v1/auth/me to obtain the victim's email address, subscription plan, and secret apiKey. The published clawvet npm package (CLI only) is not affected. |
| HCL Aftermarket EPC is affected by Business Logic Vulnerability using which a non valid user of the application can obtain passwords from the server and redirect them to their own email address by manipulating the server's response. The application includes checks in the initial requests to verify the validity of the provided UserId, but similar validation is not applied to Email requests when sending passwords to user emails. |
| SurrealDB before 3.1.0 silently substitutes the ES384 algorithm when a JWT access method is configured with ALGORITHM ES512 (DEFINE ACCESS ... TYPE JWT ALGORITHM ES512), because the underlying jsonwebtoken crate (v10.x) has no ES512 variant and the mapping defaults to ES384 without any error, warning, or log message. Users who supply the correct P-521 key for ES512 experience authentication handshake failures due to the curve mismatch with ES384 (which expects P-384), and tokens are rejected by external systems expecting genuine ES512 signatures. The flaw cannot be used to forge tokens or compromise data confidentiality or integrity, as ES384 remains cryptographically strong. |
| Missing Cryptographic Step (CWE-325) vulnerability exists in certain FeliCa IC chips shipped in or before 2017. If the vulnerability is exploited, information stored in the IC chip may be read or tampered with. |
| HCL MyCloud was affected by the SSL/TLS LUCKY13 Vulnerability. An attacker may exploit this vulnerability to decrypt sensitive information through a TLS/SSL padding oracle attack. |
| Unauthorized use of Kyocera printers, allows all information stored in the Kyocera address book to be exported. The security measure that encrypts incoming data ian be bypassed with this vulnerability, allowing encrypted data to be decrypted. Passwords and other sensitive information can be obtained. This affects Kyocera Command Center RX TASKalfa 2552ci, TASKalfa 3252ci, TASKalfa 2553ci, TASKalfa 3253ci, TASKalfa 3554ci, TASKalfa 4052ci, TASKalfa 5052ci, TASKalfa 6052ci, TASKalfa 7052ci, TASKalfa 8052ci, TASKalfa 7353ci, TASKalfa 8353ci, TASKalfa 2554ci, TASKalfa 3254ci, TASKalfa 505. |
| In Progress® Telerik® UI for AJAX prior to v2026.2.708, when Telerik.Upload.ConfigurationHashKey is absent and machineKey is not explicitly configured, upload metadata integrity protection may fall back to a predictable default key, enabling attackers to forge protected upload metadata and unlock further exploit chains. |
| In Progress® Telerik® UI for AJAX prior to v2026.2.708, the obsolete RadChart component's ChartImage.axd handler is vulnerable to unauthenticated file read and deletion of image-extension files within the application directory. |
| PraisonAI Platform is the platform layer for the PraisonAI multi-agent teams system. Versions prior to 0.1.4 have an insecure default cryptographic key. The JWT signing secret defaults to the hardcoded literal `"dev-secret-change-me"` when `PLATFORM_JWT_SECRET` is unset. A safety check exists but only fires when `PLATFORM_ENV != "dev"`; the default value of `PLATFORM_ENV` is `"dev"`, so the check is silently bypassed in any deployment that does not explicitly opt out. The attacker reads the literal from this public source file, mints a JWT with arbitrary `sub` and `email` claims, and authenticates as any existing user (including workspace owners and admins). PraisonAI Platform version 0.1.4 patches the issue. |
| Issue summary: When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42)
peer key, the peer key is not properly checked for the subgroup membership.
Impact summary: A malicious peer which presents an X9.42 key carrying the
victim's p and g parameters, a forged q = r (a small prime factor of the
cofactor (p−1)/q_local), and a public value Y of order r can recover the
victim's private key after a small number of key exchange attempts.
When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42) peer key, the
subgroup membership check Y^q ≡ 1 (mod p) is performed using the peer's
own q parameter, not the local key's q. The peer's domain parameters are
then matched against the domain parameters of the private key, but the value
of q is not compared.
A malicious peer who presents an X9.42 key carrying the victim's p, g,
a forged q = r (a small prime factor of the cofactor), and a public
value Y of order r passes all checks. The shared secret then takes only
r distinct values, leaking priv mod r. Repeating for each small-prime
factor of the cofactor and combining via CRT recovers the full private
key (Lim–Lee / small-subgroup-confinement attack).
The realistic attack surface is narrow: principally CMP deployments with
long-lived RA/CA DHX keys and bespoke enterprise or government applications
using X9.42 DHX static keys with interactive protocols and therefore this
issue was assigned Low severity.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, 3.1.2 and 3.0 are affected by this
issue. |
| joserfc is a Python library that provides an implementation of several JSON Object Signing and Encryption (JOSE) standards. Prior to 1.6.8, joserfc.jwt.decode accepts attacker-forged HMAC-signed tokens when the caller-supplied verification key is the empty string or None, because HMACAlgorithm.sign and HMACAlgorithm.verify in src/joserfc/_rfc7518/jws_algs.py pass the output of OctKey.get_op_key(...) to hmac.new(...) and OctKey.import_key in src/joserfc/_rfc7518/oct_key.py only emits a SecurityWarning for keys shorter than 14 bytes without rejecting zero-length input. This issue is fixed in version 1.6.8. |
| In PHP 8.0.X before 8.0.28, 8.1.X before 8.1.16 and 8.2.X before 8.2.3, password_verify() function may accept some invalid Blowfish hashes as valid. If such invalid hash ever ends up in the password database, it may lead to an application allowing any password for this entry as valid. |
| Dulwich through 1.1.0 was found to be missing SSH host key verification in contrib/paramiko_vendor.py. |
| Versions of the package jsrsasign before 11.1.1 are vulnerable to Missing Cryptographic Step via the KJUR.crypto.DSA.signWithMessageHash process in the DSA signing implementation. An attacker can recover the private key by forcing r or s to be zero, so the library emits an invalid signature without retrying, and then solves for x from the resulting signature. |
| HCL DFXAnalytics is affected by a Deprecated Protocol vulnerability due to the use of TLS 1.0 and TLS 1.1. These legacy protocols contain numerous cryptographic design flaws that expose data to interception and decryption. To remediate this risk, the application must disable all support for TLS 1.0 and TLS 1.1, and exclusively enable support for secure protocols, specifically TLS 1.2 and TLS 1.3. |
| ruby-jwt is a Ruby implementation of the RFC 7519 OAuth JSON Web Token standard. Prior to 2.10.3 and 3.2.0, JWT.decode(token, '', true, algorithm: 'HS256') accepts an attacker-forged token because OpenSSL::HMAC.digest('SHA256', '', payload) returns a valid digest under an empty key and no empty-key precondition exists in the HMAC algorithm. The same path is reached when a keyfinder block or key_finder: argument returns an empty string, nil, or an array containing nil for an unknown key, affecting HS256, HS384, and HS512 verification through JWT.decode and JWT::EncodedToken#verify_signature!. This issue is fixed in versions 2.10.3 and 3.2.0. |
| Missing cryptographic step in Windows Boot Loader allows an authorized attacker to bypass a security feature locally. |
| Kasa EC71 v4 and EC70 v4 firmware contains a static cryptographic private key stored in a read-only filesystem
that is shared across devices. An
attacker with access to the firmware image can extract the embedded key.
Successful
exploitation may allow an unauthenticated attacker on the same network to use
this key in the web management service, compromising the confidentiality of
encrypted communications. This may enable passive decryption of traffic or
active man-in-the-middle (MITM) attacks |
