| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| User interface (ui) misrepresentation of critical information in Microsoft Exchange Server allows an unauthorized attacker to perform spoofing over a network. |
| cryptography is a package designed to expose cryptographic primitives and recipes to Python developers. Prior to 46.0.5, the public_key_from_numbers (or EllipticCurvePublicNumbers.public_key()), EllipticCurvePublicNumbers.public_key(), load_der_public_key() and load_pem_public_key() functions do not verify that the point belongs to the expected prime-order subgroup of the curve. This missing validation allows an attacker to provide a public key point P from a small-order subgroup. This can lead to security issues in various situations, such as the most commonly used signature verification (ECDSA) and shared key negotiation (ECDH). When the victim computes the shared secret as S = [victim_private_key]P via ECDH, this leaks information about victim_private_key mod (small_subgroup_order). For curves with cofactor > 1, this reveals the least significant bits of the private key. When these weak public keys are used in ECDSA , it's easy to forge signatures on the small subgroup. Only SECT curves are impacted by this. This vulnerability is fixed in 46.0.5. |
| Cosign provides code signing and transparency for containers and binaries. Prior to versions 2.6.2 and 3.0.4, Cosign bundle can be crafted to successfully verify an artifact even if the embedded Rekor entry does not reference the artifact's digest, signature or public key. When verifying a Rekor entry, Cosign verifies the Rekor entry signature, and also compares the artifact's digest, the user's public key from either a Fulcio certificate or provided by the user, and the artifact signature to the Rekor entry contents. Without these comparisons, Cosign would accept any response from Rekor as valid. A malicious actor that has compromised a user's identity or signing key could construct a valid Cosign bundle by including any arbitrary Rekor entry, thus preventing the user from being able to audit the signing event. This issue has been patched in versions 2.6.2 and 3.0.4. |
| A weakness has been identified in MineAdmin 1.x/2.x. This impacts the function refresh of the file /system/refresh of the component JWT Token Handler. This manipulation causes insufficient verification of data authenticity. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitability is said to be difficult. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A mail spoofing vulnerability in Xerox Workplace Suite allows attackers to forge email headers, making it appear as though messages are sent from trusted sources. |
| Insufficient Verification of Data Authenticity vulnerability in TECNO Mobile com.Afmobi.Boomplayer allows Authentication Bypass.This issue affects com.Afmobi.Boomplayer: 7.4.63. |
| OpenProject is an open-source, web-based project management software. In the new editor for collaborative documents based on BlockNote, OpenProject maintainers added a custom extension in OpenProject version 17.0.0 that allows to mention OpenProject work packages in the document. To show work package details, the editor loads details about the work package via the OpenProject API. For this API call, the extension to the BlockNote editor did not properly validate the given work package ID to be only a number. This allowed an attacker to generate a document with relative links that upon opening could make arbitrary `GET` requests to any URL within the OpenProject instance. This issue was patched in version version 0.0.22 of op-blocknote-extensions, which was shipped with OpenProject 17.0.2. If users cannot update immediately to version 17.0.2 of OpenProject, administrators can disable collaborative document editing in Settings -> Documents -> Real time collaboration -> Disable. |
| OpenProject is an open-source, web-based project management software. To enable the real time collaboration on documents, OpenProject 17.0 introduced a synchronization server. The OpenPrioject backend generates an authentication token that is currently valid for 24 hours, encrypts it with a shared secret only known to the synchronization server. The frontend hands this encrypted token and the backend URL over to the synchronization server to check user's ability to work on the document and perform intermittent saves while editing. The synchronization server does not properly validate the backend URL and sends a request with the decrypted authentication token to the endpoint that was given to the server. An attacker could use this vulnerability to decrypt a token that he intercepted by other means to gain an access token to interact with OpenProject on the victim's behalf. This vulnerability was introduced with OpenProject 17.0.0 and was fixed in 17.0.2. As a workaround, disable the collaboration feature via Settings -> Documents -> Real time collaboration -> Disable. Additionally the `hocuspocus` container should also be disabled. |
| A vulnerability was found in OIDC-Client. When using the RH SSO OIDC adapter with EAP 7.x or when using the elytron-oidc-client subsystem with EAP 8.x, authorization code injection attacks can occur, allowing an attacker to inject a stolen authorization code into the attacker's own session with the client with a victim's identity. This is usually done with a Man-in-the-Middle (MitM) or phishing attack. |
| The backup ZIPs are not signed by the application, leading to the possibility that an attacker can download a backup ZIP, modify and re-upload it. This allows the attacker to disrupt the application by configuring the services in a way that they are unable to run, making the application unusable. They can redirect traffic that is meant to be internal to their own hosted services and gathering information. |
| sm-crypto provides JavaScript implementations of the Chinese cryptographic algorithms SM2, SM3, and SM4. A private key recovery vulnerability exists in the SM2 decryption logic of sm-crypto prior to version 0.3.14. By interacting with the SM2 decryption interface multiple times, an attacker can fully recover the private key within approximately several hundred interactions. Version 0.3.14 patches the issue. |
| The Rede Itaú for WooCommerce plugin for WordPress is vulnerable to order status manipulation due to insufficient verification of data authenticity in all versions up to, and including, 5.1.2. This is due to the plugin failing to verify the authenticity of payment callbacks. This makes it possible for unauthenticated attackers to manipulate WooCommerce order statuses, either marking unpaid orders as paid, or failed. |
| Entrust nShield Connect XC, nShield 5c, and nShield HSMi through 13.6.11, or 13.7, allow a physically proximate attacker with root access to modify the Recovery Partition (because of a lack of integrity protection). |
| A vulnerability was identified in chatwoot up to 4.7.0. This vulnerability affects the function initPostMessageCommunication of the file app/javascript/sdk/IFrameHelper.js of the component Widget. The manipulation of the argument baseUrl leads to origin validation error. Remote exploitation of the attack is possible. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security vulnerability has been detected in PbootCMS up to 3.2.12. The affected element is the function get_user_ip of the file core/function/handle.php of the component Header Handler. The manipulation of the argument X-Forwarded-For leads to use of less trusted source. The attack can be initiated remotely. The exploit has been disclosed publicly and may be used. |
| picklescan before 0.0.23 fails to detect malicious pickle files inside PyTorch model archives when certain ZIP file flag bits are modified. By flipping specific bits in the ZIP file headers, an attacker can embed malicious pickle files that remain undetected by PickleScan while still being successfully loaded by PyTorch's torch.load(). This can lead to arbitrary code execution when loading a compromised model. |
| picklescan before 0.0.23 is vulnerable to a ZIP archive manipulation attack that causes it to crash when attempting to extract and scan PyTorch model archives. By modifying the filename in the ZIP header while keeping the original filename in the directory listing, an attacker can make PickleScan raise a BadZipFile error. However, PyTorch's more forgiving ZIP implementation still allows the model to be loaded, enabling malicious payloads to bypass detection. |
| An arbitrary file upload vulnerability in Trend Micro Apex Central could allow an unauthenticated remote attacker to upload an arbitrary file which could lead to remote code execution. |
| Missing Authentication for Critical Function vulnerability in Mitsubishi Electric Corporation MELSEC-F Series CPU modules, MELSEC iQ-F Series, MELSEC iQ-R series CPU modules, MELSEC iQ-R series, MELSEC iQ-L series, MELSEC Q series, MELSEC-L series, Mitsubishi Electric CNC M800V/M80V series, Mitsubishi Electric CNC M800/M80/E80 series and Mitsubishi Electric CNC M700V/M70V/E70 series allows a remote unauthenticated attacker to execute arbitrary commands by sending specific packets to the affected products. This could lead to disclose or tamper with information by reading or writing control programs, or cause a denial-of-service (DoS) condition on the products by resetting the memory contents of the products to factory settings or resetting the products remotely. |
| A vulnerability in the iPXE boot function of Cisco IOS XR software could allow an authenticated, local attacker to install an unverified software image on an affected device.
This vulnerability is due to insufficient image verification. An attacker could exploit this vulnerability by manipulating the boot parameters for image verification during the iPXE boot process on an affected device. A successful exploit could allow the attacker to boot an unverified software image on the affected device. |
