Due to an Improper Initialization vulnerability in Juniper Networks Junos OS on PTX platforms and QFX10K Series with Paradise (PE) chipset-based line cards, ddos-protection configuration changes made from the CLI will not take effect as expected beyond the default DDoS (Distributed Denial of Service) settings in the Packet Forwarding Engine (PFE). This may cause BFD sessions to flap when a high rate of specific packets are received. Flapping of BFD sessions in turn may impact routing protocols and network stability, leading to a Denial of Service (DoS) condition. Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue affects only the following platforms with Paradise (PE) chipset-based line cards: PTX1000, PTX3000 (NextGen), PTX5000, PTX10008, PTX10016 Series and QFX10002 Series. This issue affects: Juniper Networks Junos OS 17.4 versions prior to 17.4R3-S5 on PTX Series, QFX10K Series; 18.2 versions prior to 18.2R3-S8 on PTX Series, QFX10K Series; 18.3 versions prior to 18.3R3-S5 on PTX Series, QFX10K Series; 18.4 versions prior to 18.4R2-S8 on PTX Series, QFX10K Series; 19.1 versions prior to 19.1R3-S5 on PTX Series, QFX10K Series; 19.2 versions prior to 19.2R3-S2 on PTX Series, QFX10K Series; 19.3 versions prior to 19.3R3-S2 on PTX Series, QFX10K Series; 19.4 versions prior to 19.4R3-S2 on PTX Series, QFX10K Series; 20.1 versions prior to 20.1R3 on PTX Series, QFX10K Series; 20.2 versions prior to 20.2R2-S3, 20.2R3 on PTX Series, QFX10K Series; 20.3 versions prior to 20.3R2 on PTX Series, QFX10K Series; 20.4 versions prior to 20.4R2 on PTX Series, QFX10K Series.

Project Subscriptions

Vendors Products
Juniper Subscribe
Ptx1000 Subscribe
Ptx1000-72q Subscribe
Ptx10000 Subscribe
Ptx10001 Subscribe
Ptx10001-36mr Subscribe
Ptx100016 Subscribe
Ptx10002 Subscribe
Ptx10002-60c Subscribe
Ptx10003 Subscribe
Ptx10003 160c Subscribe
Ptx10003 80c Subscribe
Ptx10003 81cd Subscribe
Ptx10004 Subscribe
Ptx10008 Subscribe
Ptx10016 Subscribe
Ptx3000 Subscribe
Ptx5000 Subscribe
Qfx10000 Subscribe
Qfx10002 Subscribe
Qfx10002-32q Subscribe
Qfx10002-60c Subscribe
Qfx10002-72q Subscribe
Qfx10008 Subscribe
Qfx10016 Subscribe
Advisories
Source ID Title
EUVD EUVD EUVD-2021-2899 Due to an Improper Initialization vulnerability in Juniper Networks Junos OS on PTX platforms and QFX10K Series with Paradise (PE) chipset-based line cards, ddos-protection configuration changes made from the CLI will not take effect as expected beyond the default DDoS (Distributed Denial of Service) settings in the Packet Forwarding Engine (PFE). This may cause BFD sessions to flap when a high rate of specific packets are received. Flapping of BFD sessions in turn may impact routing protocols and network stability, leading to a Denial of Service (DoS) condition. Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue affects only the following platforms with Paradise (PE) chipset-based line cards: PTX1000, PTX3000 (NextGen), PTX5000, PTX10008, PTX10016 Series and QFX10002 Series. This issue affects: Juniper Networks Junos OS 17.4 versions prior to 17.4R3-S5 on PTX Series, QFX10K Series; 18.2 versions prior to 18.2R3-S8 on PTX Series, QFX10K Series; 18.3 versions prior to 18.3R3-S5 on PTX Series, QFX10K Series; 18.4 versions prior to 18.4R2-S8 on PTX Series, QFX10K Series; 19.1 versions prior to 19.1R3-S5 on PTX Series, QFX10K Series; 19.2 versions prior to 19.2R3-S2 on PTX Series, QFX10K Series; 19.3 versions prior to 19.3R3-S2 on PTX Series, QFX10K Series; 19.4 versions prior to 19.4R3-S2 on PTX Series, QFX10K Series; 20.1 versions prior to 20.1R3 on PTX Series, QFX10K Series; 20.2 versions prior to 20.2R2-S3, 20.2R3 on PTX Series, QFX10K Series; 20.3 versions prior to 20.3R2 on PTX Series, QFX10K Series; 20.4 versions prior to 20.4R2 on PTX Series, QFX10K Series.
Fixes

Solution

The following software releases have been updated to resolve this specific issue: Junos OS 17.4R3-S5, 18.2R3-S8, 18.3R3-S5, 18.4R2-S8, 19.1R3-S5, 19.2R3-S2, 19.3R3-S2, 19.4R3-S2, 20.1R3, 20.2R2-S3, 20.2R3, 20.3R2, 20.4R2, 21.1R1, and all subsequent releases.


Workaround

The default ukern policer rate can be reduced by the CLI command: set system ddos-protection protocols <protocol-group> <aggregate | packet-type> bandwidth <packets-per-second> burst <size>

References
History

No history.

Projects

Sign in to view the affected projects.

cve-icon MITRE

Status: PUBLISHED

Assigner: juniper

Published:

Updated: 2024-09-16T22:40:56.537Z

Reserved: 2020-10-27T00:00:00

Link: CVE-2021-0280

cve-icon Vulnrichment

No data.

cve-icon NVD

Status : Modified

Published: 2021-07-15T20:15:09.627

Modified: 2024-11-21T05:42:23.447

Link: CVE-2021-0280

cve-icon Redhat

No data.

cve-icon OpenCVE Enrichment

No data.

Weaknesses