{"containers": {"cna": {"affected": [{"product": "wp-cli", "vendor": "wp-cli", "versions": [{"status": "affected", "version": "< 2.5.0"}]}], "descriptions": [{"lang": "en", "value": "WP-CLI is the command-line interface for WordPress. An improper error handling in HTTPS requests management in WP-CLI version 0.12.0 and later allows remote attackers able to intercept the communication to remotely disable the certificate verification on WP-CLI side, gaining full control over the communication content, including the ability to impersonate update servers and push malicious updates towards WordPress instances controlled by the vulnerable WP-CLI agent, or push malicious updates toward WP-CLI itself. The vulnerability stems from the fact that the default behavior of `WP_CLI\\Utils\\http_request()` when encountering a TLS handshake error is to disable certificate validation and retry the same request. The default behavior has been changed with version 2.5.0 of WP-CLI and the `wp-cli/wp-cli` framework (via https://github.com/wp-cli/wp-cli/pull/5523) so that the `WP_CLI\\Utils\\http_request()` method accepts an `$insecure` option that is `false` by default and consequently that a TLS handshake failure is a hard error by default. This new default is a breaking change and ripples through to all consumers of `WP_CLI\\Utils\\http_request()`, including those in separate WP-CLI bundled or third-party packages. https://github.com/wp-cli/wp-cli/pull/5523 has also added an `--insecure` flag to the `cli update` command to counter this breaking change. There is no direct workaround for the default insecure behavior of `wp-cli/wp-cli` versions before 2.5.0. The workaround for dealing with the breaking change in the commands directly affected by the new secure default behavior is to add the `--insecure` flag to manually opt-in to the previous insecure behavior."}], "metrics": [{"cvssV3_1": {"attackComplexity": "LOW", "attackVector": "NETWORK", "availabilityImpact": "NONE", "baseScore": 9.1, "baseSeverity": "CRITICAL", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N", "version": "3.1"}}], "problemTypes": [{"descriptions": [{"cweId": "CWE-295", "description": "CWE-295: Improper Certificate Validation", "lang": "en", "type": "CWE"}]}], "providerMetadata": {"dateUpdated": "2021-06-07T20:50:17", "orgId": "a0819718-46f1-4df5-94e2-005712e83aaa", "shortName": "GitHub_M"}, "references": [{"tags": ["x_refsource_CONFIRM"], "url": "https://github.com/wp-cli/wp-cli/security/advisories/GHSA-rwgm-f83r-v3qj"}, {"tags": ["x_refsource_MISC"], "url": "https://github.com/wp-cli/checksum-command/pull/86"}, {"tags": ["x_refsource_MISC"], "url": "https://github.com/wp-cli/config-command/pull/128"}, {"tags": ["x_refsource_MISC"], "url": "https://github.com/wp-cli/core-command/pull/186"}, {"tags": ["x_refsource_MISC"], "url": "https://github.com/wp-cli/extension-command/pull/287"}, {"tags": ["x_refsource_MISC"], "url": "https://github.com/wp-cli/package-command/pull/138"}, {"tags": ["x_refsource_MISC"], "url": "https://github.com/wp-cli/wp-cli/pull/5523"}], "source": {"advisory": "GHSA-rwgm-f83r-v3qj", "discovery": "UNKNOWN"}, "title": "Improper Certificate Validation in WP-CLI framework", "x_legacyV4Record": {"CVE_data_meta": {"ASSIGNER": "security-advisories@github.com", "ID": "CVE-2021-29504", "STATE": "PUBLIC", "TITLE": "Improper Certificate Validation in WP-CLI framework"}, "affects": {"vendor": {"vendor_data": [{"product": {"product_data": [{"product_name": "wp-cli", "version": {"version_data": [{"version_value": "< 2.5.0"}]}}]}, "vendor_name": "wp-cli"}]}}, "data_format": "MITRE", "data_type": "CVE", "data_version": "4.0", "description": {"description_data": [{"lang": "eng", "value": "WP-CLI is the command-line interface for WordPress. An improper error handling in HTTPS requests management in WP-CLI version 0.12.0 and later allows remote attackers able to intercept the communication to remotely disable the certificate verification on WP-CLI side, gaining full control over the communication content, including the ability to impersonate update servers and push malicious updates towards WordPress instances controlled by the vulnerable WP-CLI agent, or push malicious updates toward WP-CLI itself. The vulnerability stems from the fact that the default behavior of `WP_CLI\\Utils\\http_request()` when encountering a TLS handshake error is to disable certificate validation and retry the same request. The default behavior has been changed with version 2.5.0 of WP-CLI and the `wp-cli/wp-cli` framework (via https://github.com/wp-cli/wp-cli/pull/5523) so that the `WP_CLI\\Utils\\http_request()` method accepts an `$insecure` option that is `false` by default and consequently that a TLS handshake failure is a hard error by default. This new default is a breaking change and ripples through to all consumers of `WP_CLI\\Utils\\http_request()`, including those in separate WP-CLI bundled or third-party packages. https://github.com/wp-cli/wp-cli/pull/5523 has also added an `--insecure` flag to the `cli update` command to counter this breaking change. There is no direct workaround for the default insecure behavior of `wp-cli/wp-cli` versions before 2.5.0. The workaround for dealing with the breaking change in the commands directly affected by the new secure default behavior is to add the `--insecure` flag to manually opt-in to the previous insecure behavior."}]}, "impact": {"cvss": {"attackComplexity": "LOW", "attackVector": "NETWORK", "availabilityImpact": "NONE", "baseScore": 9.1, "baseSeverity": "CRITICAL", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N", "version": "3.1"}}, "problemtype": {"problemtype_data": [{"description": [{"lang": "eng", "value": "CWE-295: Improper Certificate Validation"}]}]}, "references": {"reference_data": [{"name": "https://github.com/wp-cli/wp-cli/security/advisories/GHSA-rwgm-f83r-v3qj", "refsource": "CONFIRM", "url": "https://github.com/wp-cli/wp-cli/security/advisories/GHSA-rwgm-f83r-v3qj"}, {"name": "https://github.com/wp-cli/checksum-command/pull/86", "refsource": "MISC", "url": "https://github.com/wp-cli/checksum-command/pull/86"}, {"name": "https://github.com/wp-cli/config-command/pull/128", "refsource": "MISC", "url": "https://github.com/wp-cli/config-command/pull/128"}, {"name": "https://github.com/wp-cli/core-command/pull/186", "refsource": "MISC", "url": "https://github.com/wp-cli/core-command/pull/186"}, {"name": "https://github.com/wp-cli/extension-command/pull/287", "refsource": "MISC", "url": "https://github.com/wp-cli/extension-command/pull/287"}, {"name": "https://github.com/wp-cli/package-command/pull/138", "refsource": "MISC", "url": "https://github.com/wp-cli/package-command/pull/138"}, {"name": "https://github.com/wp-cli/wp-cli/pull/5523", "refsource": "MISC", "url": "https://github.com/wp-cli/wp-cli/pull/5523"}]}, "source": {"advisory": "GHSA-rwgm-f83r-v3qj", "discovery": "UNKNOWN"}}}, "adp": [{"providerMetadata": {"orgId": "af854a3a-2127-422b-91ae-364da2661108", "shortName": "CVE", "dateUpdated": "2024-08-03T22:11:05.507Z"}, "title": "CVE Program Container", "references": [{"tags": ["x_refsource_CONFIRM", "x_transferred"], "url": "https://github.com/wp-cli/wp-cli/security/advisories/GHSA-rwgm-f83r-v3qj"}, {"tags": ["x_refsource_MISC", "x_transferred"], "url": "https://github.com/wp-cli/checksum-command/pull/86"}, {"tags": ["x_refsource_MISC", "x_transferred"], "url": "https://github.com/wp-cli/config-command/pull/128"}, {"tags": ["x_refsource_MISC", "x_transferred"], "url": "https://github.com/wp-cli/core-command/pull/186"}, {"tags": ["x_refsource_MISC", "x_transferred"], "url": "https://github.com/wp-cli/extension-command/pull/287"}, {"tags": ["x_refsource_MISC", "x_transferred"], "url": "https://github.com/wp-cli/package-command/pull/138"}, {"tags": ["x_refsource_MISC", "x_transferred"], "url": "https://github.com/wp-cli/wp-cli/pull/5523"}]}]}, "cveMetadata": {"assignerOrgId": "a0819718-46f1-4df5-94e2-005712e83aaa", "assignerShortName": "GitHub_M", "cveId": "CVE-2021-29504", "datePublished": "2021-06-07T20:50:17", "dateReserved": "2021-03-30T00:00:00", "dateUpdated": "2024-08-03T22:11:05.507Z", "state": "PUBLISHED"}, "dataType": "CVE_RECORD", "dataVersion": "5.1"}

{}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:a:wp-cli:wp-cli:*:*:*:*:*:*:*:*", "matchCriteriaId": "7905C5F9-7215-431B-87D0-B302B66363D9", "versionEndExcluding": "2.5.0", "versionStartIncluding": "0.12.0", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "descriptions": [{"lang": "en", "value": "WP-CLI is the command-line interface for WordPress. An improper error handling in HTTPS requests management in WP-CLI version 0.12.0 and later allows remote attackers able to intercept the communication to remotely disable the certificate verification on WP-CLI side, gaining full control over the communication content, including the ability to impersonate update servers and push malicious updates towards WordPress instances controlled by the vulnerable WP-CLI agent, or push malicious updates toward WP-CLI itself. The vulnerability stems from the fact that the default behavior of `WP_CLI\\Utils\\http_request()` when encountering a TLS handshake error is to disable certificate validation and retry the same request. The default behavior has been changed with version 2.5.0 of WP-CLI and the `wp-cli/wp-cli` framework (via https://github.com/wp-cli/wp-cli/pull/5523) so that the `WP_CLI\\Utils\\http_request()` method accepts an `$insecure` option that is `false` by default and consequently that a TLS handshake failure is a hard error by default. This new default is a breaking change and ripples through to all consumers of `WP_CLI\\Utils\\http_request()`, including those in separate WP-CLI bundled or third-party packages. https://github.com/wp-cli/wp-cli/pull/5523 has also added an `--insecure` flag to the `cli update` command to counter this breaking change. There is no direct workaround for the default insecure behavior of `wp-cli/wp-cli` versions before 2.5.0. The workaround for dealing with the breaking change in the commands directly affected by the new secure default behavior is to add the `--insecure` flag to manually opt-in to the previous insecure behavior."}, {"lang": "es", "value": "WP-CLI es la interfaz de l\u00ednea de comandos para WordPress. Un manejo inapropiado de errores en la administraci\u00f3n de peticiones HTTPS en la versi\u00f3n 0.12.0 y posteriores de WP-CLI, permite a atacantes remotos capaces de interceptar la comunicaci\u00f3n desactivar remotamente la comprobaci\u00f3n del certificado en el lado de WP-CLI, obteniendo un control total sobre el contenido de la comunicaci\u00f3n, incluyendo la habilidad de hacerse pasar por servidores de actualizaci\u00f3n y empujar actualizaciones maliciosas hacia instancias de WordPress controladas por el agente vulnerable de WP-CLI, o empujar actualizaciones maliciosas hacia el propio WP-CLI. La vulnerabilidad proviene del hecho de que el comportamiento por defecto de la funci\u00f3n \"WP_CLI\\Utils\\http_request()\" cuando se encuentra un error de protocolo de enlace TLS es desactivar la comprobaci\u00f3n del certificado y volver a intentar la misma petici\u00f3n. El comportamiento por defecto ha sido cambiado con la versi\u00f3n 2.5.0 de WP-CLI y el framework \"wp-cli/wp-cli\" (por medio de https://github.com/wp-cli/wp-cli/pull/5523) para que el m\u00e9todo \"WP_CLI\\Utils\\http_request()\" acepte una opci\u00f3n \"$insecure\" que es \"false\" por defecto y en consecuentemente un fallo de protocolo de enlace TLS es un error duro por defecto. Este nuevo valor por defecto es un cambio de ruptura y se extiende a todos los consumidores de la funci\u00f3n \"WP_CLI\\Utils\\http_request()\", incluyendo aquellos en paquetes separados de WP-CLI o de terceros. https://github.com/wp-cli/wp-cli/pull/5523 tambi\u00e9n ha a\u00f1adido un flag \"--insecure\" al comando \"cli update\" para contrarrestar este cambio de ruptura. No hay una soluci\u00f3n directa para el comportamiento no seguro por defecto de las versiones anteriores a 2.5.0 de \"wp-cli/wp-cli\". La soluci\u00f3n para tratar el cambio de ruptura en los comandos directamente afectados por el nuevo comportamiento seguro por defecto es a\u00f1adir el flag \"--insecure\" para optar manualmente por el comportamiento no seguro anterior"}], "id": "CVE-2021-29504", "lastModified": "2024-11-21T06:01:15.860", "metrics": {"cvssMetricV2": [{"acInsufInfo": false, "baseSeverity": "HIGH", "cvssData": {"accessComplexity": "LOW", "accessVector": "NETWORK", "authentication": "NONE", "availabilityImpact": "PARTIAL", "baseScore": 7.5, "confidentialityImpact": "PARTIAL", "integrityImpact": "PARTIAL", "vectorString": "AV:N/AC:L/Au:N/C:P/I:P/A:P", "version": "2.0"}, "exploitabilityScore": 10.0, "impactScore": 6.4, "obtainAllPrivilege": false, "obtainOtherPrivilege": false, "obtainUserPrivilege": false, "source": "nvd@nist.gov", "type": "Primary", "userInteractionRequired": false}], "cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "NETWORK", "availabilityImpact": "NONE", "baseScore": 9.1, "baseSeverity": "CRITICAL", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N", "version": "3.1"}, "exploitabilityScore": 3.9, "impactScore": 5.2, "source": "security-advisories@github.com", "type": "Secondary"}, {"cvssData": {"attackComplexity": "HIGH", "attackVector": "NETWORK", "availabilityImpact": "NONE", "baseScore": 7.4, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "NONE", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N", "version": "3.1"}, "exploitabilityScore": 2.2, "impactScore": 5.2, "source": "nvd@nist.gov", "type": "Primary"}]}, "published": "2021-06-07T21:15:08.387", "references": [{"source": "security-advisories@github.com", "tags": ["Patch", "Third Party Advisory"], "url": "https://github.com/wp-cli/checksum-command/pull/86"}, {"source": "security-advisories@github.com", "tags": ["Patch", "Third Party Advisory"], "url": "https://github.com/wp-cli/config-command/pull/128"}, {"source": "security-advisories@github.com", "tags": ["Patch", "Third Party Advisory"], "url": "https://github.com/wp-cli/core-command/pull/186"}, {"source": "security-advisories@github.com", "tags": ["Patch", "Third Party Advisory"], "url": "https://github.com/wp-cli/extension-command/pull/287"}, {"source": "security-advisories@github.com", "tags": ["Third Party Advisory"], "url": "https://github.com/wp-cli/package-command/pull/138"}, {"source": "security-advisories@github.com", "tags": ["Patch", "Third Party Advisory"], "url": "https://github.com/wp-cli/wp-cli/pull/5523"}, {"source": "security-advisories@github.com", "tags": ["Third Party Advisory"], "url": "https://github.com/wp-cli/wp-cli/security/advisories/GHSA-rwgm-f83r-v3qj"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "tags": ["Patch", "Third Party Advisory"], "url": "https://github.com/wp-cli/checksum-command/pull/86"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "tags": ["Patch", "Third Party Advisory"], "url": "https://github.com/wp-cli/config-command/pull/128"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "tags": ["Patch", "Third Party Advisory"], "url": "https://github.com/wp-cli/core-command/pull/186"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "tags": ["Patch", "Third Party Advisory"], "url": "https://github.com/wp-cli/extension-command/pull/287"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "tags": ["Third Party Advisory"], "url": "https://github.com/wp-cli/package-command/pull/138"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "tags": ["Patch", "Third Party Advisory"], "url": "https://github.com/wp-cli/wp-cli/pull/5523"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "tags": ["Third Party Advisory"], "url": "https://github.com/wp-cli/wp-cli/security/advisories/GHSA-rwgm-f83r-v3qj"}], "sourceIdentifier": "security-advisories@github.com", "vulnStatus": "Modified", "weaknesses": [{"description": [{"lang": "en", "value": "CWE-295"}], "source": "security-advisories@github.com", "type": "Secondary"}]}

{}