{"dataType": "CVE_RECORD", "dataVersion": "5.1", "cveMetadata": {"cveId": "CVE-2024-43900", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2024-08-17T09:11:59.291Z", "datePublished": "2024-08-26T10:10:58.767Z", "dateUpdated": "2024-11-05T09:42:04.843Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2024-11-05T09:42:04.843Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nmedia: xc2028: avoid use-after-free in load_firmware_cb()\n\nsyzkaller reported use-after-free in load_firmware_cb() [1].\nThe reason is because the module allocated a struct tuner in tuner_probe(),\nand then the module initialization failed, the struct tuner was released.\nA worker which created during module initialization accesses this struct\ntuner later, it caused use-after-free.\n\nThe process is as follows:\n\ntask-6504 worker_thread\ntuner_probe <= alloc dvb_frontend [2]\n...\nrequest_firmware_nowait <= create a worker\n...\ntuner_remove <= free dvb_frontend\n...\n request_firmware_work_func <= the firmware is ready\n load_firmware_cb <= but now the dvb_frontend has been freed\n\nTo fix the issue, check the dvd_frontend in load_firmware_cb(), if it is\nnull, report a warning and just return.\n\n[1]:\n ==================================================================\n BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0\n Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504\n\n Call trace:\n load_firmware_cb+0x1310/0x17a0\n request_firmware_work_func+0x128/0x220\n process_one_work+0x770/0x1824\n worker_thread+0x488/0xea0\n kthread+0x300/0x430\n ret_from_fork+0x10/0x20\n\n Allocated by task 6504:\n kzalloc\n tuner_probe+0xb0/0x1430\n i2c_device_probe+0x92c/0xaf0\n really_probe+0x678/0xcd0\n driver_probe_device+0x280/0x370\n __device_attach_driver+0x220/0x330\n bus_for_each_drv+0x134/0x1c0\n __device_attach+0x1f4/0x410\n device_initial_probe+0x20/0x30\n bus_probe_device+0x184/0x200\n device_add+0x924/0x12c0\n device_register+0x24/0x30\n i2c_new_device+0x4e0/0xc44\n v4l2_i2c_new_subdev_board+0xbc/0x290\n v4l2_i2c_new_subdev+0xc8/0x104\n em28xx_v4l2_init+0x1dd0/0x3770\n\n Freed by task 6504:\n kfree+0x238/0x4e4\n tuner_remove+0x144/0x1c0\n i2c_device_remove+0xc8/0x290\n __device_release_driver+0x314/0x5fc\n device_release_driver+0x30/0x44\n bus_remove_device+0x244/0x490\n device_del+0x350/0x900\n device_unregister+0x28/0xd0\n i2c_unregister_device+0x174/0x1d0\n v4l2_device_unregister+0x224/0x380\n em28xx_v4l2_init+0x1d90/0x3770\n\n The buggy address belongs to the object at ffff8000d7ca2000\n which belongs to the cache kmalloc-2k of size 2048\n The buggy address is located 776 bytes inside of\n 2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800)\n The buggy address belongs to the page:\n page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0\n flags: 0x7ff800000000100(slab)\n raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000\n raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000\n page dumped because: kasan: bad access detected\n\n Memory state around the buggy address:\n ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n >ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n ^\n ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n ==================================================================\n\n[2]\n Actually, it is allocated for struct tuner, and dvb_frontend is inside."}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/media/tuners/xc2028.c"], "versions": [{"version": "1da177e4c3f4", "lessThan": "ef517bdfc018", "status": "affected", "versionType": "git"}, {"version": "1da177e4c3f4", "lessThan": "850304152d36", "status": "affected", "versionType": "git"}, {"version": "1da177e4c3f4", "lessThan": "208deb6d8c3c", "status": "affected", "versionType": "git"}, {"version": "1da177e4c3f4", "lessThan": "68594cec291f", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/media/tuners/xc2028.c"], "versions": [{"version": "6.1.105", "lessThanOrEqual": "6.1.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.6.46", "lessThanOrEqual": "6.6.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.10.5", "lessThanOrEqual": "6.10.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.11", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "references": [{"url": "https://git.kernel.org/stable/c/ef517bdfc01818419f7bd426969a0c86b14f3e0e"}, {"url": "https://git.kernel.org/stable/c/850304152d367f104d21c77cfbcc05806504218b"}, {"url": "https://git.kernel.org/stable/c/208deb6d8c3cb8c3acb1f41eb31cf68ea08726d5"}, {"url": "https://git.kernel.org/stable/c/68594cec291ff9523b9feb3f43fd853dcddd1f60"}], "title": "media: xc2028: avoid use-after-free in load_firmware_cb()", "x_generator": {"engine": "bippy-9e1c9544281a"}}, "adp": [{"metrics": [{"other": {"type": "ssvc", "content": {"id": "CVE-2024-43900", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "version": "2.0.3", "timestamp": "2024-09-10T15:28:53.298476Z"}}}], "title": "CISA ADP Vulnrichment", "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2024-09-12T17:32:57.642Z"}}]}}

{"dataType": "CVE_RECORD", "containers": {"adp": [{"title": "CISA ADP Vulnrichment", "metrics": [{"other": {"type": "ssvc", "content": {"id": "CVE-2024-43900", "role": "CISA Coordinator", "options": [{"Exploitation": "none"}, {"Automatable": "no"}, {"Technical Impact": "partial"}], "version": "2.0.3", "timestamp": "2024-09-10T15:28:53.298476Z"}}}], "providerMetadata": {"orgId": "134c704f-9b21-4f2e-91b3-4a467353bcc0", "shortName": "CISA-ADP", "dateUpdated": "2024-09-11T12:42:12.454Z"}}], "cna": {"title": "media: xc2028: avoid use-after-free in load_firmware_cb()", "affected": [{"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "affected", "version": "1da177e4c3f4", "lessThan": "ef517bdfc018", "versionType": "git"}, {"status": "affected", "version": "1da177e4c3f4", "lessThan": "850304152d36", "versionType": "git"}, {"status": "affected", "version": "1da177e4c3f4", "lessThan": "208deb6d8c3c", "versionType": "git"}, {"status": "affected", "version": "1da177e4c3f4", "lessThan": "68594cec291f", "versionType": "git"}], "programFiles": ["drivers/media/tuners/xc2028.c"], "defaultStatus": "unaffected"}, {"repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "vendor": "Linux", "product": "Linux", "versions": [{"status": "unaffected", "version": "6.1.105", "versionType": "custom", "lessThanOrEqual": "6.1.*"}, {"status": "unaffected", "version": "6.6.46", "versionType": "custom", "lessThanOrEqual": "6.6.*"}, {"status": "unaffected", "version": "6.10.5", "versionType": "custom", "lessThanOrEqual": "6.10.*"}, {"status": "unaffected", "version": "6.11", "versionType": "original_commit_for_fix", "lessThanOrEqual": "*"}], "programFiles": ["drivers/media/tuners/xc2028.c"], "defaultStatus": "affected"}], "references": [{"url": "https://git.kernel.org/stable/c/ef517bdfc01818419f7bd426969a0c86b14f3e0e"}, {"url": "https://git.kernel.org/stable/c/850304152d367f104d21c77cfbcc05806504218b"}, {"url": "https://git.kernel.org/stable/c/208deb6d8c3cb8c3acb1f41eb31cf68ea08726d5"}, {"url": "https://git.kernel.org/stable/c/68594cec291ff9523b9feb3f43fd853dcddd1f60"}], "x_generator": {"engine": "bippy-c9c4e1df01b2"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nmedia: xc2028: avoid use-after-free in load_firmware_cb()\n\nsyzkaller reported use-after-free in load_firmware_cb() [1].\nThe reason is because the module allocated a struct tuner in tuner_probe(),\nand then the module initialization failed, the struct tuner was released.\nA worker which created during module initialization accesses this struct\ntuner later, it caused use-after-free.\n\nThe process is as follows:\n\ntask-6504 worker_thread\ntuner_probe <= alloc dvb_frontend [2]\n...\nrequest_firmware_nowait <= create a worker\n...\ntuner_remove <= free dvb_frontend\n...\n request_firmware_work_func <= the firmware is ready\n load_firmware_cb <= but now the dvb_frontend has been freed\n\nTo fix the issue, check the dvd_frontend in load_firmware_cb(), if it is\nnull, report a warning and just return.\n\n[1]:\n ==================================================================\n BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0\n Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504\n\n Call trace:\n load_firmware_cb+0x1310/0x17a0\n request_firmware_work_func+0x128/0x220\n process_one_work+0x770/0x1824\n worker_thread+0x488/0xea0\n kthread+0x300/0x430\n ret_from_fork+0x10/0x20\n\n Allocated by task 6504:\n kzalloc\n tuner_probe+0xb0/0x1430\n i2c_device_probe+0x92c/0xaf0\n really_probe+0x678/0xcd0\n driver_probe_device+0x280/0x370\n __device_attach_driver+0x220/0x330\n bus_for_each_drv+0x134/0x1c0\n __device_attach+0x1f4/0x410\n device_initial_probe+0x20/0x30\n bus_probe_device+0x184/0x200\n device_add+0x924/0x12c0\n device_register+0x24/0x30\n i2c_new_device+0x4e0/0xc44\n v4l2_i2c_new_subdev_board+0xbc/0x290\n v4l2_i2c_new_subdev+0xc8/0x104\n em28xx_v4l2_init+0x1dd0/0x3770\n\n Freed by task 6504:\n kfree+0x238/0x4e4\n tuner_remove+0x144/0x1c0\n i2c_device_remove+0xc8/0x290\n __device_release_driver+0x314/0x5fc\n device_release_driver+0x30/0x44\n bus_remove_device+0x244/0x490\n device_del+0x350/0x900\n device_unregister+0x28/0xd0\n i2c_unregister_device+0x174/0x1d0\n v4l2_device_unregister+0x224/0x380\n em28xx_v4l2_init+0x1d90/0x3770\n\n The buggy address belongs to the object at ffff8000d7ca2000\n which belongs to the cache kmalloc-2k of size 2048\n The buggy address is located 776 bytes inside of\n 2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800)\n The buggy address belongs to the page:\n page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0\n flags: 0x7ff800000000100(slab)\n raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000\n raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000\n page dumped because: kasan: bad access detected\n\n Memory state around the buggy address:\n ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n >ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n ^\n ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n ==================================================================\n\n[2]\n Actually, it is allocated for struct tuner, and dvb_frontend is inside."}], "providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2024-09-15T17:55:10.560Z"}}}, "cveMetadata": {"cveId": "CVE-2024-43900", "state": "PUBLISHED", "dateUpdated": "2024-09-15T17:55:10.560Z", "dateReserved": "2024-08-17T09:11:59.291Z", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "datePublished": "2024-08-26T10:10:58.767Z", "assignerShortName": "Linux"}, "dataVersion": "5.1"}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "ECB889E5-9368-4201-9049-7289757A0B8D", "versionEndExcluding": "6.1.105", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "FA11941E-81FB-484C-B583-881EEB488340", "versionEndExcluding": "6.6.46", "versionStartIncluding": "6.2", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "D074AE50-4A5E-499C-A2FD-75FD60DEA560", "versionEndExcluding": "6.10.5", "versionStartIncluding": "6.7", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nmedia: xc2028: avoid use-after-free in load_firmware_cb()\n\nsyzkaller reported use-after-free in load_firmware_cb() [1].\nThe reason is because the module allocated a struct tuner in tuner_probe(),\nand then the module initialization failed, the struct tuner was released.\nA worker which created during module initialization accesses this struct\ntuner later, it caused use-after-free.\n\nThe process is as follows:\n\ntask-6504 worker_thread\ntuner_probe <= alloc dvb_frontend [2]\n...\nrequest_firmware_nowait <= create a worker\n...\ntuner_remove <= free dvb_frontend\n...\n request_firmware_work_func <= the firmware is ready\n load_firmware_cb <= but now the dvb_frontend has been freed\n\nTo fix the issue, check the dvd_frontend in load_firmware_cb(), if it is\nnull, report a warning and just return.\n\n[1]:\n ==================================================================\n BUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0\n Read of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504\n\n Call trace:\n load_firmware_cb+0x1310/0x17a0\n request_firmware_work_func+0x128/0x220\n process_one_work+0x770/0x1824\n worker_thread+0x488/0xea0\n kthread+0x300/0x430\n ret_from_fork+0x10/0x20\n\n Allocated by task 6504:\n kzalloc\n tuner_probe+0xb0/0x1430\n i2c_device_probe+0x92c/0xaf0\n really_probe+0x678/0xcd0\n driver_probe_device+0x280/0x370\n __device_attach_driver+0x220/0x330\n bus_for_each_drv+0x134/0x1c0\n __device_attach+0x1f4/0x410\n device_initial_probe+0x20/0x30\n bus_probe_device+0x184/0x200\n device_add+0x924/0x12c0\n device_register+0x24/0x30\n i2c_new_device+0x4e0/0xc44\n v4l2_i2c_new_subdev_board+0xbc/0x290\n v4l2_i2c_new_subdev+0xc8/0x104\n em28xx_v4l2_init+0x1dd0/0x3770\n\n Freed by task 6504:\n kfree+0x238/0x4e4\n tuner_remove+0x144/0x1c0\n i2c_device_remove+0xc8/0x290\n __device_release_driver+0x314/0x5fc\n device_release_driver+0x30/0x44\n bus_remove_device+0x244/0x490\n device_del+0x350/0x900\n device_unregister+0x28/0xd0\n i2c_unregister_device+0x174/0x1d0\n v4l2_device_unregister+0x224/0x380\n em28xx_v4l2_init+0x1d90/0x3770\n\n The buggy address belongs to the object at ffff8000d7ca2000\n which belongs to the cache kmalloc-2k of size 2048\n The buggy address is located 776 bytes inside of\n 2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800)\n The buggy address belongs to the page:\n page:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0\n flags: 0x7ff800000000100(slab)\n raw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000\n raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000\n page dumped because: kasan: bad access detected\n\n Memory state around the buggy address:\n ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n >ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n ^\n ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n ffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n ==================================================================\n\n[2]\n Actually, it is allocated for struct tuner, and dvb_frontend is inside."}, {"lang": "es", "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: medio: xc2028: evitar el use-after-free en load_firmware_cb() syzkaller inform\u00f3 el use-after-free en load_firmware_cb() [1]. La raz\u00f3n es que el m\u00f3dulo asign\u00f3 un sintonizador de estructuras en tuner_probe(), y luego la inicializaci\u00f3n del m\u00f3dulo fall\u00f3, se liber\u00f3 el sintonizador de estructuras. Un trabajador que cre\u00f3 durante la inicializaci\u00f3n del m\u00f3dulo accede a este sintonizador de estructuras m\u00e1s tarde, lo que provoc\u00f3 un use-after-free. El proceso es el siguiente: task-6504 trabajador_thread tuner_probe &lt;= alloc dvb_frontend [2]... request_firmware_nowait &lt;= crear un trabajador... tuner_remove &lt;= free dvb_frontend... request_firmware_work_func &lt;= el firmware est\u00e1 listo load_firmware_cb &lt;= pero ahora el dvb_frontend ha sido liberado. Para solucionar el problema, verifique el dvd_frontend en load_firmware_cb(), si es nulo, informe una advertencia y simplemente regrese. [1]: =============================================== ==================== ERROR: KASAN: use-after-free en load_firmware_cb+0x1310/0x17a0 Lectura de tama\u00f1o 8 en la direcci\u00f3n ffff8000d7ca2308 por tarea kworker/2:3/ 6504 Rastreo de llamadas: load_firmware_cb+0x1310/0x17a0 request_firmware_work_func+0x128/0x220 Process_one_work+0x770/0x1824 Workers_thread+0x488/0xea0 kthread+0x300/0x430 ret_from_fork+0x10/0x20 Asignado por tarea 650 4: kzalloc tuner_probe+0xb0/0x1430 i2c_device_probe+0x92c/0xaf0 very_probe+0x678/0xcd0 driver_probe_device+0x280/0x370 __device_attach_driver+0x220/0x330 bus_for_each_drv+0x134/0x1c0 __device_attach+0x1f4/0x410 dispositivo_initial_probe+0x20/0x30 bus_probe_device+0x 184/0x200 dispositivo_add+0x924/0x12c0 registro_dispositivo+0x24/0x30 i2c_new_device+0x4e0/0xc44 v4l2_i2c_new_subdev_board+0xbc/0x290 v4l2_i2c_new_subdev+0xc8/0x104 em28xx_v4l2_init+0x1dd0/0x3770 Liberado por la tarea 6504: kfree+0x238/0x4e4 tuner_remove+0x144/0x1c0 vice_remove+0xc8/0x290 __device_release_driver+0x314/0x5fc dispositivo_release_driver+0x30/0x44 bus_remove_device+0x244/0x490 device_del+0x350/0x900 device_unregister+0x28/0xd0 i2c_unregister_device+0x174/0x1d0 v4l2_device_unregister+0x224/0x380 em28xx_v4l2_init+0x1d90/0x3770 La direcci\u00f3n con errores pertenece al objeto en ffff8000d7ca200 0 que pertenece al cach\u00e9 kmalloc-2k de tama\u00f1o 2048 La direcci\u00f3n del error se encuentra 776 bytes dentro de la regi\u00f3n de 2048 bytes [ffff8000d7ca2000, ffff8000d7ca2800) La direcci\u00f3n con errores pertenece a la p\u00e1gina: p\u00e1gina:ffff7fe00035f280 recuento:1 mapcount:0 mapeo:ffff8000c001f000 \u00edndice:0x0 banderas: 0x7ff800000000100(slab) : 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000 crudo: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 p\u00e1gina volcada porque: kasan: mal acceso detectado Estado de la memoria alrededor de la direcci\u00f3n del error: ffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb f b fb fb fb ffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb &gt;ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8000d7ca2400: b fb fb fb fb fb fb fb fb fb fb fb fb fb fb ======================================== ============================ [2] En realidad, est\u00e1 asignado para el sintonizador de estructuras y dvb_frontend est\u00e1 dentro."}], "id": "CVE-2024-43900", "lastModified": "2024-08-27T14:38:32.967", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 7.8, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 5.9, "source": "nvd@nist.gov", "type": "Primary"}]}, "published": "2024-08-26T11:15:04.613", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/208deb6d8c3cb8c3acb1f41eb31cf68ea08726d5"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/68594cec291ff9523b9feb3f43fd853dcddd1f60"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/850304152d367f104d21c77cfbcc05806504218b"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/ef517bdfc01818419f7bd426969a0c86b14f3e0e"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Analyzed", "weaknesses": [{"description": [{"lang": "en", "value": "CWE-416"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{"bugzilla": {"description": "kernel: media: xc2028: avoid use-after-free in load_firmware_cb()", "id": "2307873", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2307873"}, "csaw": false, "cvss3": {"cvss3_base_score": "6.4", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:H/PR:H/UI:N/S:U/C:H/I:H/A:H", "status": "draft"}, "cwe": "CWE-416", "details": ["In the Linux kernel, the following vulnerability has been resolved:\nmedia: xc2028: avoid use-after-free in load_firmware_cb()\nsyzkaller reported use-after-free in load_firmware_cb() [1].\nThe reason is because the module allocated a struct tuner in tuner_probe(),\nand then the module initialization failed, the struct tuner was released.\nA worker which created during module initialization accesses this struct\ntuner later, it caused use-after-free.\nThe process is as follows:\ntask-6504 worker_thread\ntuner_probe <= alloc dvb_frontend [2]\n...\nrequest_firmware_nowait <= create a worker\n...\ntuner_remove <= free dvb_frontend\n...\nrequest_firmware_work_func <= the firmware is ready\nload_firmware_cb <= but now the dvb_frontend has been freed\nTo fix the issue, check the dvd_frontend in load_firmware_cb(), if it is\nnull, report a warning and just return.\n[1]:\n==================================================================\nBUG: KASAN: use-after-free in load_firmware_cb+0x1310/0x17a0\nRead of size 8 at addr ffff8000d7ca2308 by task kworker/2:3/6504\nCall trace:\nload_firmware_cb+0x1310/0x17a0\nrequest_firmware_work_func+0x128/0x220\nprocess_one_work+0x770/0x1824\nworker_thread+0x488/0xea0\nkthread+0x300/0x430\nret_from_fork+0x10/0x20\nAllocated by task 6504:\nkzalloc\ntuner_probe+0xb0/0x1430\ni2c_device_probe+0x92c/0xaf0\nreally_probe+0x678/0xcd0\ndriver_probe_device+0x280/0x370\n__device_attach_driver+0x220/0x330\nbus_for_each_drv+0x134/0x1c0\n__device_attach+0x1f4/0x410\ndevice_initial_probe+0x20/0x30\nbus_probe_device+0x184/0x200\ndevice_add+0x924/0x12c0\ndevice_register+0x24/0x30\ni2c_new_device+0x4e0/0xc44\nv4l2_i2c_new_subdev_board+0xbc/0x290\nv4l2_i2c_new_subdev+0xc8/0x104\nem28xx_v4l2_init+0x1dd0/0x3770\nFreed by task 6504:\nkfree+0x238/0x4e4\ntuner_remove+0x144/0x1c0\ni2c_device_remove+0xc8/0x290\n__device_release_driver+0x314/0x5fc\ndevice_release_driver+0x30/0x44\nbus_remove_device+0x244/0x490\ndevice_del+0x350/0x900\ndevice_unregister+0x28/0xd0\ni2c_unregister_device+0x174/0x1d0\nv4l2_device_unregister+0x224/0x380\nem28xx_v4l2_init+0x1d90/0x3770\nThe buggy address belongs to the object at ffff8000d7ca2000\nwhich belongs to the cache kmalloc-2k of size 2048\nThe buggy address is located 776 bytes inside of\n2048-byte region [ffff8000d7ca2000, ffff8000d7ca2800)\nThe buggy address belongs to the page:\npage:ffff7fe00035f280 count:1 mapcount:0 mapping:ffff8000c001f000 index:0x0\nflags: 0x7ff800000000100(slab)\nraw: 07ff800000000100 ffff7fe00049d880 0000000300000003 ffff8000c001f000\nraw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000\npage dumped because: kasan: bad access detected\nMemory state around the buggy address:\nffff8000d7ca2200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\nffff8000d7ca2280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n>ffff8000d7ca2300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n^\nffff8000d7ca2380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\nffff8000d7ca2400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb\n==================================================================\n[2]\nActually, it is allocated for struct tuner, and dvb_frontend is inside."], "name": "CVE-2024-43900", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2024-08-26T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2024-43900\nhttps://nvd.nist.gov/vuln/detail/CVE-2024-43900\nhttps://lore.kernel.org/linux-cve-announce/2024082616-CVE-2024-43900-029c@gregkh/T"], "threat_severity": "Moderate"}