{"dataType": "CVE_RECORD", "dataVersion": "5.1", "cveMetadata": {"cveId": "CVE-2024-56625", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2024-12-27T14:03:06.017Z", "datePublished": "2024-12-27T14:51:28.206Z", "dateUpdated": "2025-05-04T10:00:14.732Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2025-05-04T10:00:14.732Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ncan: dev: can_set_termination(): allow sleeping GPIOs\n\nIn commit 6e86a1543c37 (\"can: dev: provide optional GPIO based\ntermination support\") GPIO based termination support was added.\n\nFor no particular reason that patch uses gpiod_set_value() to set the\nGPIO. This leads to the following warning, if the systems uses a\nsleeping GPIO, i.e. behind an I2C port expander:\n\n| WARNING: CPU: 0 PID: 379 at /drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x50/0x6c\n| CPU: 0 UID: 0 PID: 379 Comm: ip Not tainted 6.11.0-20241016-1 #1 823affae360cc91126e4d316d7a614a8bf86236c\n\nReplace gpiod_set_value() by gpiod_set_value_cansleep() to allow the\nuse of sleeping GPIOs."}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/net/can/dev/dev.c"], "versions": [{"version": "6e86a1543c378f2e8837ad88f361b7bf606c80f7", "lessThan": "faa0a1975a6fbce30616775216606eb8d6388ea1", "status": "affected", "versionType": "git"}, {"version": "6e86a1543c378f2e8837ad88f361b7bf606c80f7", "lessThan": "46637a608fb1ee871a0ad8bf70d917d5d95ac251", "status": "affected", "versionType": "git"}, {"version": "6e86a1543c378f2e8837ad88f361b7bf606c80f7", "lessThan": "1ac442f25c19953d2f33b92549628b0aeac83db6", "status": "affected", "versionType": "git"}, {"version": "6e86a1543c378f2e8837ad88f361b7bf606c80f7", "lessThan": "3b0c5bb437d31a9864f633b85cbc42d2f6c51c96", "status": "affected", "versionType": "git"}, {"version": "6e86a1543c378f2e8837ad88f361b7bf606c80f7", "lessThan": "ee1dfbdd8b4b6de85e96ae2059dc9c1bdb6b49b5", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/net/can/dev/dev.c"], "versions": [{"version": "5.15", "status": "affected"}, {"version": "0", "lessThan": "5.15", "status": "unaffected", "versionType": "semver"}, {"version": "5.15.174", "lessThanOrEqual": "5.15.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.1.120", "lessThanOrEqual": "6.1.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.6.66", "lessThanOrEqual": "6.6.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.12.5", "lessThanOrEqual": "6.12.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.13", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.15", "versionEndExcluding": "5.15.174"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.15", "versionEndExcluding": "6.1.120"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.15", "versionEndExcluding": "6.6.66"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.15", "versionEndExcluding": "6.12.5"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.15", "versionEndExcluding": "6.13"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/faa0a1975a6fbce30616775216606eb8d6388ea1"}, {"url": "https://git.kernel.org/stable/c/46637a608fb1ee871a0ad8bf70d917d5d95ac251"}, {"url": "https://git.kernel.org/stable/c/1ac442f25c19953d2f33b92549628b0aeac83db6"}, {"url": "https://git.kernel.org/stable/c/3b0c5bb437d31a9864f633b85cbc42d2f6c51c96"}, {"url": "https://git.kernel.org/stable/c/ee1dfbdd8b4b6de85e96ae2059dc9c1bdb6b49b5"}], "title": "can: dev: can_set_termination(): allow sleeping GPIOs", "x_generator": {"engine": "bippy-1.2.0"}}}}

{}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "005C9407-09BA-46F6-A8A9-A04EED9F948E", "versionEndExcluding": "5.15.174", "versionStartIncluding": "5.15", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "09AC6122-E2A4-40FE-9D33-268A1B2EC265", "versionEndExcluding": "6.1.120", "versionStartIncluding": "5.16", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "29A976AD-B9AB-4A95-9F08-7669F8847EB9", "versionEndExcluding": "6.6.66", "versionStartIncluding": "6.2", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "9501D045-7A94-42CA-8B03-821BE94A65B7", "versionEndExcluding": "6.12.5", "versionStartIncluding": "6.7", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.13:rc1:*:*:*:*:*:*", "matchCriteriaId": "62567B3C-6CEE-46D0-BC2E-B3717FBF7D13", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\ncan: dev: can_set_termination(): allow sleeping GPIOs\n\nIn commit 6e86a1543c37 (\"can: dev: provide optional GPIO based\ntermination support\") GPIO based termination support was added.\n\nFor no particular reason that patch uses gpiod_set_value() to set the\nGPIO. This leads to the following warning, if the systems uses a\nsleeping GPIO, i.e. behind an I2C port expander:\n\n| WARNING: CPU: 0 PID: 379 at /drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x50/0x6c\n| CPU: 0 UID: 0 PID: 379 Comm: ip Not tainted 6.11.0-20241016-1 #1 823affae360cc91126e4d316d7a614a8bf86236c\n\nReplace gpiod_set_value() by gpiod_set_value_cansleep() to allow the\nuse of sleeping GPIOs."}, {"lang": "es", "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: can: dev: can_set_termination(): permitir GPIO inactivos En el commit 6e86a1543c37 (\"can: dev: proporcionar soporte de terminaci\u00f3n basado en GPIO opcional\") se agreg\u00f3 soporte de terminaci\u00f3n basado en GPIO. Sin ninguna raz\u00f3n en particular, ese parche usa gpiod_set_value() para configurar el GPIO. Esto lleva a la siguiente advertencia, si el sistema usa un GPIO inactivo, es decir, detr\u00e1s de un expansor de puerto I2C: | ADVERTENCIA: CPU: 0 PID: 379 en /drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x50/0x6c | CPU: 0 UID: 0 PID: 379 Comm: ip No contaminado 6.11.0-20241016-1 #1 823affae360cc91126e4d316d7a614a8bf86236c Reemplace gpiod_set_value() por gpiod_set_value_cansleep() para permitir el uso de GPIO inactivos."}], "id": "CVE-2024-56625", "lastModified": "2025-10-07T19:18:51.843", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 5.5, "baseSeverity": "MEDIUM", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 3.6, "source": "nvd@nist.gov", "type": "Primary"}]}, "published": "2024-12-27T15:15:22.033", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/1ac442f25c19953d2f33b92549628b0aeac83db6"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/3b0c5bb437d31a9864f633b85cbc42d2f6c51c96"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/46637a608fb1ee871a0ad8bf70d917d5d95ac251"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/ee1dfbdd8b4b6de85e96ae2059dc9c1bdb6b49b5"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/faa0a1975a6fbce30616775216606eb8d6388ea1"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Analyzed", "weaknesses": [{"description": [{"lang": "en", "value": "NVD-CWE-noinfo"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{"bugzilla": {"description": "kernel: can: dev: can_set_termination(): allow sleeping GPIOs", "id": "2334512", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2334512"}, "csaw": false, "cvss3": {"cvss3_base_score": "3.3", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:L", "status": "draft"}, "cwe": "CWE-673", "details": ["In the Linux kernel, the following vulnerability has been resolved:\ncan: dev: can_set_termination(): allow sleeping GPIOs\nIn commit 6e86a1543c37 (\"can: dev: provide optional GPIO based\ntermination support\") GPIO based termination support was added.\nFor no particular reason that patch uses gpiod_set_value() to set the\nGPIO. This leads to the following warning, if the systems uses a\nsleeping GPIO, i.e. behind an I2C port expander:\n| WARNING: CPU: 0 PID: 379 at /drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x50/0x6c\n| CPU: 0 UID: 0 PID: 379 Comm: ip Not tainted 6.11.0-20241016-1 #1 823affae360cc91126e4d316d7a614a8bf86236c\nReplace gpiod_set_value() by gpiod_set_value_cansleep() to allow the\nuse of sleeping GPIOs."], "name": "CVE-2024-56625", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Fix deferred", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Fix deferred", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2024-12-27T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2024-56625\nhttps://nvd.nist.gov/vuln/detail/CVE-2024-56625\nhttps://lore.kernel.org/linux-cve-announce/2024122711-CVE-2024-56625-82a7@gregkh/T"], "threat_severity": "Low"}

{"created": "2025-07-12T16:01:27.738527+00:00", "updated": "2025-07-12T16:01:27.738610+00:00", "vendors": ["linux", "linux$PRODUCT$linux_kernel"]}