{"dataType": "CVE_RECORD", "dataVersion": "5.1", "cveMetadata": {"cveId": "CVE-2025-37861", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2025-04-16T04:51:23.957Z", "datePublished": "2025-05-09T06:42:07.245Z", "dateUpdated": "2025-05-26T05:22:30.734Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2025-05-26T05:22:30.734Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nscsi: mpi3mr: Synchronous access b/w reset and tm thread for reply queue\n\nWhen the task management thread processes reply queues while the reset\nthread resets them, the task management thread accesses an invalid queue ID\n(0xFFFF), set by the reset thread, which points to unallocated memory,\ncausing a crash.\n\nAdd flag 'io_admin_reset_sync' to synchronize access between the reset,\nI/O, and admin threads. Before a reset, the reset handler sets this flag to\nblock I/O and admin processing threads. If any thread bypasses the initial\ncheck, the reset thread waits up to 10 seconds for processing to finish. If\nthe wait exceeds 10 seconds, the controller is marked as unrecoverable."}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/scsi/mpi3mr/mpi3mr.h", "drivers/scsi/mpi3mr/mpi3mr_fw.c"], "versions": [{"version": "c4f7ac64616ee513f9ac4ae6c4d8c3cccb6974df", "lessThan": "65ba18c84dbd03afe9b38c06c151239d97a09834", "status": "affected", "versionType": "git"}, {"version": "c4f7ac64616ee513f9ac4ae6c4d8c3cccb6974df", "lessThan": "8d310d66e2b0f5f9f709764641647e8a3a4924fa", "status": "affected", "versionType": "git"}, {"version": "c4f7ac64616ee513f9ac4ae6c4d8c3cccb6974df", "lessThan": "75b67dca4195e11ccf966a704787b2aa2754a457", "status": "affected", "versionType": "git"}, {"version": "c4f7ac64616ee513f9ac4ae6c4d8c3cccb6974df", "lessThan": "f195fc060c738d303a21fae146dbf85e1595fb4c", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/scsi/mpi3mr/mpi3mr.h", "drivers/scsi/mpi3mr/mpi3mr_fw.c"], "versions": [{"version": "5.14", "status": "affected"}, {"version": "0", "lessThan": "5.14", "status": "unaffected", "versionType": "semver"}, {"version": "6.12.24", "lessThanOrEqual": "6.12.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.13.12", "lessThanOrEqual": "6.13.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.14.3", "lessThanOrEqual": "6.14.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.15", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.14", "versionEndExcluding": "6.12.24"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.14", "versionEndExcluding": "6.13.12"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.14", "versionEndExcluding": "6.14.3"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.14", "versionEndExcluding": "6.15"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/65ba18c84dbd03afe9b38c06c151239d97a09834"}, {"url": "https://git.kernel.org/stable/c/8d310d66e2b0f5f9f709764641647e8a3a4924fa"}, {"url": "https://git.kernel.org/stable/c/75b67dca4195e11ccf966a704787b2aa2754a457"}, {"url": "https://git.kernel.org/stable/c/f195fc060c738d303a21fae146dbf85e1595fb4c"}], "title": "scsi: mpi3mr: Synchronous access b/w reset and tm thread for reply queue", "x_generator": {"engine": "bippy-1.2.0"}}}}

{}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "F63C7207-C216-4564-984F-4A2BF84098D1", "versionEndExcluding": "6.12.24", "versionStartIncluding": "5.14", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "4A475784-BF3B-4514-81EE-49C8522FB24A", "versionEndExcluding": "6.13.12", "versionStartIncluding": "6.13", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "483E2E15-2135-4EC6-AB64-16282C5EF704", "versionEndExcluding": "6.14.3", "versionStartIncluding": "6.14", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nscsi: mpi3mr: Synchronous access b/w reset and tm thread for reply queue\n\nWhen the task management thread processes reply queues while the reset\nthread resets them, the task management thread accesses an invalid queue ID\n(0xFFFF), set by the reset thread, which points to unallocated memory,\ncausing a crash.\n\nAdd flag 'io_admin_reset_sync' to synchronize access between the reset,\nI/O, and admin threads. Before a reset, the reset handler sets this flag to\nblock I/O and admin processing threads. If any thread bypasses the initial\ncheck, the reset thread waits up to 10 seconds for processing to finish. If\nthe wait exceeds 10 seconds, the controller is marked as unrecoverable."}, {"lang": "es", "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: scsi: mpi3mr: Acceso s\u00edncrono entre los subprocesos de reinicio y tm para la cola de respuestas. Cuando el subproceso de gesti\u00f3n de tareas procesa las colas de respuestas mientras el subproceso de reinicio las reinicia, este \u00faltimo accede a un ID de cola no v\u00e1lido (0xFFFF), establecido por el subproceso de reinicio, que apunta a memoria no asignada, lo que provoca un fallo. Se ha a\u00f1adido el indicador \u00abio_admin_reset_sync\u00bb para sincronizar el acceso entre los subprocesos de reinicio, E/S y administraci\u00f3n. Antes de un reinicio, el controlador de reinicio establece este indicador para bloquear los subprocesos de procesamiento de E/S y administraci\u00f3n. Si alg\u00fan subproceso omite la comprobaci\u00f3n inicial, el subproceso de reinicio espera hasta 10 segundos a que finalice el procesamiento. Si la espera supera los 10 segundos, el controlador se marca como irrecuperable."}], "id": "CVE-2025-37861", "lastModified": "2025-11-12T20:12:35.137", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 7.8, "baseSeverity": "HIGH", "confidentialityImpact": "HIGH", "integrityImpact": "HIGH", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 5.9, "source": "nvd@nist.gov", "type": "Primary"}]}, "published": "2025-05-09T07:16:07.073", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/65ba18c84dbd03afe9b38c06c151239d97a09834"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/75b67dca4195e11ccf966a704787b2aa2754a457"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/8d310d66e2b0f5f9f709764641647e8a3a4924fa"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/f195fc060c738d303a21fae146dbf85e1595fb4c"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Analyzed", "weaknesses": [{"description": [{"lang": "en", "value": "CWE-416"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{"bugzilla": {"description": "kernel: scsi: mpi3mr: Synchronous access b/w reset and tm thread for reply queue", "id": "2365256", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2365256"}, "csaw": false, "cvss3": {"cvss3_base_score": "5.5", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "status": "draft"}, "details": ["In the Linux kernel, the following vulnerability has been resolved:\nscsi: mpi3mr: Synchronous access b/w reset and tm thread for reply queue\nWhen the task management thread processes reply queues while the reset\nthread resets them, the task management thread accesses an invalid queue ID\n(0xFFFF), set by the reset thread, which points to unallocated memory,\ncausing a crash.\nAdd flag 'io_admin_reset_sync' to synchronize access between the reset,\nI/O, and admin threads. Before a reset, the reset handler sets this flag to\nblock I/O and admin processing threads. If any thread bypasses the initial\ncheck, the reset thread waits up to 10 seconds for processing to finish. If\nthe wait exceeds 10 seconds, the controller is marked as unrecoverable."], "name": "CVE-2025-37861", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:10", "fix_state": "Fix deferred", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 10"}, {"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Not affected", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Out of support scope", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Out of support scope", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Fix deferred", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Fix deferred", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2025-05-09T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2025-37861\nhttps://nvd.nist.gov/vuln/detail/CVE-2025-37861\nhttps://lore.kernel.org/linux-cve-announce/2025050922-CVE-2025-37861-ab7f@gregkh/T"], "threat_severity": "Moderate"}

{}