| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix memory leak in qla2x00_probe_one()
There is a memory leak reported by kmemleak:
unreferenced object 0xffffc900003f0000 (size 12288):
comm "modprobe", pid 19117, jiffies 4299751452 (age 42490.264s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000629261a8>] __vmalloc_node_range+0xe56/0x1110
[<0000000001906886>] __vmalloc_node+0xbd/0x150
[<000000005bb4dc34>] vmalloc+0x25/0x30
[<00000000a2dc1194>] qla2x00_create_host+0x7a0/0xe30 [qla2xxx]
[<0000000062b14b47>] qla2x00_probe_one+0x2eb8/0xd160 [qla2xxx]
[<00000000641ccc04>] local_pci_probe+0xeb/0x1a0
The root cause is traced to an error-handling path in qla2x00_probe_one()
when the adapter "base_vha" initialize failed. The fab_scan_rp "scan.l" is
used to record the port information and it is allocated in
qla2x00_create_host(). However, it is not released in the error handling
path "probe_failed".
Fix this by freeing the memory of "scan.l" when an error occurs in the
adapter initialization process. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: Fix memory leak in __ima_inode_hash()
Commit f3cc6b25dcc5 ("ima: always measure and audit files in policy") lets
measurement or audit happen even if the file digest cannot be calculated.
As a result, iint->ima_hash could have been allocated despite
ima_collect_measurement() returning an error.
Since ima_hash belongs to a temporary inode metadata structure, declared
at the beginning of __ima_inode_hash(), just add a kfree() call if
ima_collect_measurement() returns an error different from -ENOMEM (in that
case, ima_hash should not have been allocated). |
| In the Linux kernel, the following vulnerability has been resolved:
udf: Detect system inodes linked into directory hierarchy
When UDF filesystem is corrupted, hidden system inodes can be linked
into directory hierarchy which is an avenue for further serious
corruption of the filesystem and kernel confusion as noticed by syzbot
fuzzed images. Refuse to access system inodes linked into directory
hierarchy and vice versa. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: fix memory corruption in ioctl
If "s_mem.bytes" is larger than the buffer size it leads to memory
corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: thunderbay: fix possible memory leak in thunderbay_build_functions()
The thunderbay_add_functions() will free memory of thunderbay_funcs
when everything is ok, but thunderbay_funcs will not be freed when
thunderbay_add_functions() fails, then there will be a memory leak,
so we need to add kfree() when thunderbay_add_functions() fails to
fix it.
In addition, doing some cleaner works, moving kfree(funcs) from
thunderbay_add_functions() to thunderbay_build_functions(). |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm: Fix memleak of pmu attr_groups in unregister_nvdimm_pmu()
Memory pointed by 'nd_pmu->pmu.attr_groups' is allocated in function
'register_nvdimm_pmu' and is lost after 'kfree(nd_pmu)' call in function
'unregister_nvdimm_pmu'. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_hid: fix f_hidg lifetime vs cdev
The embedded struct cdev does not have its lifetime correctly tied to
the enclosing struct f_hidg, so there is a use-after-free if /dev/hidgN
is held open while the gadget is deleted.
This can readily be replicated with libusbgx's example programs (for
conciseness - operating directly via configfs is equivalent):
gadget-hid
exec 3<> /dev/hidg0
gadget-vid-pid-remove
exec 3<&-
Pull the existing device up in to struct f_hidg and make use of the
cdev_device_{add,del}() helpers. This changes the lifetime of the
device object to match struct f_hidg, but note that it is still added
and deleted at the same time. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/privcmd: Fix a possible warning in privcmd_ioctl_mmap_resource()
As 'kdata.num' is user-controlled data, if user tries to allocate
memory larger than(>=) MAX_ORDER, then kcalloc() will fail, it
creates a stack trace and messes up dmesg with a warning.
Call trace:
-> privcmd_ioctl
--> privcmd_ioctl_mmap_resource
Add __GFP_NOWARN in order to avoid too large allocation warning.
This is detected by static analysis using smatch. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: pch: Fix PCI device refcount leak in pch_request_dma()
As comment of pci_get_slot() says, it returns a pci_device with its
refcount increased. The caller must decrement the reference count by
calling pci_dev_put().
Since 'dma_dev' is only used to filter the channel in filter(), we can
call pci_dev_put() before exiting from pch_request_dma(). Add the
missing pci_dev_put() for the normal and error path. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: fix refcount underflow in error path
Fix a refcount underflow problem reported by syzbot that can happen
when a system is running out of memory. If xp_alloc_tx_descs() fails,
and it can only fail due to not having enough memory, then the error
path is triggered. In this error path, the refcount of the pool is
decremented as it has incremented before. However, the reference to
the pool in the socket was not nulled. This means that when the socket
is closed later, the socket teardown logic will think that there is a
pool attached to the socket and try to decrease the refcount again,
leading to a refcount underflow.
I chose this fix as it involved adding just a single line. Another
option would have been to move xp_get_pool() and the assignment of
xs->pool to after the if-statement and using xs_umem->pool instead of
xs->pool in the whole if-statement resulting in somewhat simpler code,
but this would have led to much more churn in the code base perhaps
making it harder to backport. |
| In the Linux kernel, the following vulnerability has been resolved:
regmap-irq: Use the new num_config_regs property in regmap_add_irq_chip_fwnode
Commit faa87ce9196d ("regmap-irq: Introduce config registers for irq
types") added the num_config_regs, then commit 9edd4f5aee84 ("regmap-irq:
Deprecate type registers and virtual registers") suggested to replace
num_type_reg with it. However, regmap_add_irq_chip_fwnode wasn't modified
to use the new property. Later on, commit 255a03bb1bb3 ("ASoC: wcd9335:
Convert irq chip to config regs") removed the old num_type_reg property
from the WCD9335 driver's struct regmap_irq_chip, causing a null pointer
dereference in regmap_irq_set_type when it tried to index d->type_buf as
it was never allocated in regmap_add_irq_chip_fwnode:
[ 39.199374] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 39.200006] Call trace:
[ 39.200014] regmap_irq_set_type+0x84/0x1c0
[ 39.200026] __irq_set_trigger+0x60/0x1c0
[ 39.200040] __setup_irq+0x2f4/0x78c
[ 39.200051] request_threaded_irq+0xe8/0x1a0
Use num_config_regs in regmap_add_irq_chip_fwnode instead of num_type_reg,
and fall back to it if num_config_regs isn't defined to maintain backward
compatibility. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Fix potential null-ptr-deref due to drmm_mode_config_init()
drmm_mode_config_init() will call drm_mode_create_standard_properties()
and won't check the ret value. When drm_mode_create_standard_properties()
failed due to alloc, property will be a NULL pointer and may causes the
null-ptr-deref. Fix the null-ptr-deref by adding the ret value check.
Found null-ptr-deref while testing insert module bochs:
general protection fault, probably for non-canonical address
0xdffffc000000000c: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
CPU: 3 PID: 249 Comm: modprobe Not tainted 6.1.0-rc1+ #364
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:drm_object_attach_property+0x73/0x3c0 [drm]
Call Trace:
<TASK>
__drm_connector_init+0xb6c/0x1100 [drm]
bochs_pci_probe.cold.11+0x4cb/0x7fe [bochs]
pci_device_probe+0x17d/0x340
really_probe+0x1db/0x5d0
__driver_probe_device+0x1e7/0x250
driver_probe_device+0x4a/0x120
__driver_attach+0xcd/0x2c0
bus_for_each_dev+0x11a/0x1b0
bus_add_driver+0x3d7/0x500
driver_register+0x18e/0x320
do_one_initcall+0xc4/0x3e0
do_init_module+0x1b4/0x630
load_module+0x5dca/0x7230
__do_sys_finit_module+0x100/0x170
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ff65af9f839 |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: ftrace: Fixup panic by disabling preemption
In RISCV, we must use an AUIPC + JALR pair to encode an immediate,
forming a jump that jumps to an address over 4K. This may cause errors
if we want to enable kernel preemption and remove dependency from
patching code with stop_machine(). For example, if a task was switched
out on auipc. And, if we changed the ftrace function before it was
switched back, then it would jump to an address that has updated 11:0
bits mixing with previous XLEN:12 part.
p: patched area performed by dynamic ftrace
ftrace_prologue:
p| REG_S ra, -SZREG(sp)
p| auipc ra, 0x? ------------> preempted
...
change ftrace function
...
p| jalr -?(ra) <------------- switched back
p| REG_L ra, -SZREG(sp)
func:
xxx
ret |
| In the Linux kernel, the following vulnerability has been resolved:
drm/omap: dss: Fix refcount leak bugs
In dss_init_ports() and __dss_uninit_ports(), we should call
of_node_put() for the reference returned by of_graph_get_port_by_id()
in fail path or when it is not used anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: fix memory leak in iio_device_register_eventset()
When iio_device_register_sysfs_group() returns failed,
iio_device_register_eventset() needs to free attrs array.
Otherwise, kmemleak would scan & report memory leak as below:
unreferenced object 0xffff88810a1cc3c0 (size 32):
comm "100-i2c-vcnl302", pid 728, jiffies 4295052307 (age 156.027s)
backtrace:
__kmalloc+0x46/0x1b0
iio_device_register_eventset at drivers/iio/industrialio-event.c:541
__iio_device_register at drivers/iio/industrialio-core.c:1959
__devm_iio_device_register at drivers/iio/industrialio-core.c:2040 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: fix mt7915_rate_txpower_get() resource leaks
Coverity message: variable "buf" going out of scope leaks the storage.
Addresses-Coverity-ID: 1527799 ("Resource leaks") |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: Fix device name leak when register device failed in add_mtd_device()
There is a kmemleak when register device failed:
unreferenced object 0xffff888101aab550 (size 8):
comm "insmod", pid 3922, jiffies 4295277753 (age 925.408s)
hex dump (first 8 bytes):
6d 74 64 30 00 88 ff ff mtd0....
backtrace:
[<00000000bde26724>] __kmalloc_node_track_caller+0x4e/0x150
[<000000003c32b416>] kvasprintf+0xb0/0x130
[<000000001f7a8f15>] kobject_set_name_vargs+0x2f/0xb0
[<000000006e781163>] dev_set_name+0xab/0xe0
[<00000000e30d0c78>] add_mtd_device+0x4bb/0x700
[<00000000f3d34de7>] mtd_device_parse_register+0x2ac/0x3f0
[<00000000c0d88488>] 0xffffffffa0238457
[<00000000b40d0922>] 0xffffffffa02a008f
[<0000000023d17b9d>] do_one_initcall+0x87/0x2a0
[<00000000770f6ca6>] do_init_module+0xdf/0x320
[<000000007b6768fe>] load_module+0x2f98/0x3330
[<00000000346bed5a>] __do_sys_finit_module+0x113/0x1b0
[<00000000674c2290>] do_syscall_64+0x35/0x80
[<000000004c6a8d97>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
If register device failed, should call put_device() to give up the
reference. |
| In the Linux kernel, the following vulnerability has been resolved:
dm thin: Fix UAF in run_timer_softirq()
When dm_resume() and dm_destroy() are concurrent, it will
lead to UAF, as follows:
BUG: KASAN: use-after-free in __run_timers+0x173/0x710
Write of size 8 at addr ffff88816d9490f0 by task swapper/0/0
<snip>
Call Trace:
<IRQ>
dump_stack_lvl+0x73/0x9f
print_report.cold+0x132/0xaa2
_raw_spin_lock_irqsave+0xcd/0x160
__run_timers+0x173/0x710
kasan_report+0xad/0x110
__run_timers+0x173/0x710
__asan_store8+0x9c/0x140
__run_timers+0x173/0x710
call_timer_fn+0x310/0x310
pvclock_clocksource_read+0xfa/0x250
kvm_clock_read+0x2c/0x70
kvm_clock_get_cycles+0xd/0x20
ktime_get+0x5c/0x110
lapic_next_event+0x38/0x50
clockevents_program_event+0xf1/0x1e0
run_timer_softirq+0x49/0x90
__do_softirq+0x16e/0x62c
__irq_exit_rcu+0x1fa/0x270
irq_exit_rcu+0x12/0x20
sysvec_apic_timer_interrupt+0x8e/0xc0
One of the concurrency UAF can be shown as below:
use free
do_resume |
__find_device_hash_cell |
dm_get |
atomic_inc(&md->holders) |
| dm_destroy
| __dm_destroy
| if (!dm_suspended_md(md))
| atomic_read(&md->holders)
| msleep(1)
dm_resume |
__dm_resume |
dm_table_resume_targets |
pool_resume |
do_waker #add delay work |
dm_put |
atomic_dec(&md->holders) |
| dm_table_destroy
| pool_dtr
| __pool_dec
| __pool_destroy
| destroy_workqueue
| kfree(pool) # free pool
time out
__do_softirq
run_timer_softirq # pool has already been freed
This can be easily reproduced using:
1. create thin-pool
2. dmsetup suspend pool
3. dmsetup resume pool
4. dmsetup remove_all # Concurrent with 3
The root cause of this UAF bug is that dm_resume() adds timer after
dm_destroy() skips cancelling the timer because of suspend status.
After timeout, it will call run_timer_softirq(), however pool has
already been freed. The concurrency UAF bug will happen.
Therefore, cancelling timer again in __pool_destroy(). |
| In the Linux kernel, the following vulnerability has been resolved:
clk: imx: scu: fix memleak on platform_device_add() fails
No error handling is performed when platform_device_add()
fails. Add error processing before return, and modified
the return value. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: plfxlc: fix potential memory leak in __lf_x_usb_enable_rx()
urbs does not be freed in exception paths in __lf_x_usb_enable_rx().
That will trigger memory leak. To fix it, add kfree() for urbs within
"error" label. Compile tested only. |
