| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ESPHome is a system to control microcontrollers remotely through Home Automation systems. API endpoints in dashboard component of ESPHome version 2023.12.9 (command line installation) are vulnerable to Cross-Site Request Forgery (CSRF) allowing remote attackers to carry out attacks against a logged user of the dashboard to perform operations on configuration files (create, edit, delete). It is possible for a malicious actor to create a specifically crafted web page that triggers a cross site request against ESPHome, this allows bypassing the authentication for API calls on the platform. This vulnerability allows bypassing authentication on API calls accessing configuration file operations on the behalf of a logged user. In order to trigger the vulnerability, the victim must visit a weaponized page. In addition to this, it is possible to chain this vulnerability with GHSA-9p43-hj5j-96h5/ CVE-2024-27287 to obtain a complete takeover of the user account. Version 2024.3.0 contains a patch for this issue.
|
| A vulnerability classified as problematic has been found in Luna Imaging up to 7.5.5.6. Affected is an unknown function of the file /luna/servlet/view/search. The manipulation of the argument q leads to cross site scripting. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A critical OS Command Injection vulnerability has been identified in the FAST LTA Silent Brick WebUI, allowing remote attackers to execute arbitrary operating system commands via specially crafted input. This vulnerability arises due to improper handling of untrusted input, which is passed directly to system-level commands without adequate sanitization or validation. Successful exploitation could allow attackers to execute arbitrary commands on the affected system, potentially resulting in unauthorized access, data leakage, or full system compromise. Affected WebUI parameters are "hd" and "pi". |
| A vulnerability was identified in SapneshNaik Student Management System up to f4b4f0928f0b5551a28ee81ae7e7fe47d9345318. This impacts an unknown function of the file index.php. Such manipulation of the argument Error leads to cross site scripting. The attack can be launched remotely. The exploit is publicly available and might be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Seeyon Zhiyuan Interconnect FE Collaborative Office Platform up to 20250224. It has been rated as critical. Affected by this issue is some unknown functionality of the file /security/addUser.jsp. The manipulation of the argument groupId leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In certain conditions, SAP NetWeaver Application Server ABAP allows an authenticated attacker to craft a Remote Function Call (RFC) request to restricted destinations, which can be used to expose credentials for a remote service. These credentials can then be further exploited to completely compromise the remote service, potentially resulting in a significant impact on the confidentiality, integrity, and availability of the application. |
| A vulnerability in the Virtual Keyboard Video Monitor (vKVM) connection handling of Cisco Integrated Management Controller (IMC) could allow an unauthenticated, remote attacker to redirect a user to a malicious website.
This vulnerability is due to insufficient verification of vKVM endpoints. An attacker could exploit this vulnerability by persuading a user to click a crafted link. A successful exploit could allow the attacker to redirect a user to a malicious webpage and potentially capture user credentials.
Note: The affected vKVM client is also included in Cisco UCS Manager. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Fix IA32_PMC_x_CFG_B MSRs access error
When running perf_fuzzer on PTL, sometimes the below "unchecked MSR
access error" is seen when accessing IA32_PMC_x_CFG_B MSRs.
[ 55.611268] unchecked MSR access error: WRMSR to 0x1986 (tried to write 0x0000000200000001) at rIP: 0xffffffffac564b28 (native_write_msr+0x8/0x30)
[ 55.611280] Call Trace:
[ 55.611282] <TASK>
[ 55.611284] ? intel_pmu_config_acr+0x87/0x160
[ 55.611289] intel_pmu_enable_acr+0x6d/0x80
[ 55.611291] intel_pmu_enable_event+0xce/0x460
[ 55.611293] x86_pmu_start+0x78/0xb0
[ 55.611297] x86_pmu_enable+0x218/0x3a0
[ 55.611300] ? x86_pmu_enable+0x121/0x3a0
[ 55.611302] perf_pmu_enable+0x40/0x50
[ 55.611307] ctx_resched+0x19d/0x220
[ 55.611309] __perf_install_in_context+0x284/0x2f0
[ 55.611311] ? __pfx_remote_function+0x10/0x10
[ 55.611314] remote_function+0x52/0x70
[ 55.611317] ? __pfx_remote_function+0x10/0x10
[ 55.611319] generic_exec_single+0x84/0x150
[ 55.611323] smp_call_function_single+0xc5/0x1a0
[ 55.611326] ? __pfx_remote_function+0x10/0x10
[ 55.611329] perf_install_in_context+0xd1/0x1e0
[ 55.611331] ? __pfx___perf_install_in_context+0x10/0x10
[ 55.611333] __do_sys_perf_event_open+0xa76/0x1040
[ 55.611336] __x64_sys_perf_event_open+0x26/0x30
[ 55.611337] x64_sys_call+0x1d8e/0x20c0
[ 55.611339] do_syscall_64+0x4f/0x120
[ 55.611343] entry_SYSCALL_64_after_hwframe+0x76/0x7e
On PTL, GP counter 0 and 1 doesn't support auto counter reload feature,
thus it would trigger a #GP when trying to write 1 on bit 0 of CFG_B MSR
which requires to enable auto counter reload on GP counter 0.
The root cause of causing this issue is the check for auto counter
reload (ACR) counter mask from user space is incorrect in
intel_pmu_acr_late_setup() helper. It leads to an invalid ACR counter
mask from user space could be set into hw.config1 and then written into
CFG_B MSRs and trigger the MSR access warning.
e.g., User may create a perf event with ACR counter mask (config2=0xcb),
and there is only 1 event created, so "cpuc->n_events" is 1.
The correct check condition should be "i + idx >= cpuc->n_events"
instead of "i + idx > cpuc->n_events" (it looks a typo). Otherwise,
the counter mask would traverse twice and an invalid "cpuc->assign[1]"
bit (bit 0) is set into hw.config1 and cause MSR accessing error.
Besides, also check if the ACR counter mask corresponding events are
ACR events. If not, filter out these counter mask. If a event is not a
ACR event, it could be scheduled to an HW counter which doesn't support
ACR. It's invalid to add their counter index in ACR counter mask.
Furthermore, remove the WARN_ON_ONCE() since it's easily triggered as
user could set any invalid ACR counter mask and the warning message
could mislead users. |
| A vulnerability in Cisco Catalyst Center Virtual Appliance could allow an authenticated, remote attacker to elevate privileges to Administrator on an affected system.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted HTTP request to an affected system. A successful exploit could allow the attacker to perform unauthorized modifications to the system, including creating new user accounts or elevating their own privileges on an affected system. To exploit this vulnerability, the attacker must have valid credentials for a user account with at least the role of Observer. |
| OS command injection vulnerability in the WEB UI (the setting page) exists in Wi-Fi AP UNIT 'AC-WPS-11ac series'. If exploited, an arbitrary OS command may be executed by a remote attacker who can log in to the product. |
| Path traversal may allow remote code execution using privileged account
(requires device admin account, cannot be performed by a regular user).
In combination with the 'Upload' functionality this could be used to
execute an arbitrary script or possibly an uploaded binary. Remediation
in Version 6.7.0, release date: 20-Oct-24. |
| mitmproxy is a interactive TLS-capable intercepting HTTP proxy for penetration testers and software developers and mitmweb is a web-based interface for mitmproxy. In mitmweb 11.1.1 and below, a malicious client can use mitmweb's proxy server (bound to `*:8080` by default) to access mitmweb's internal API (bound to `127.0.0.1:8081` by default). In other words, while the cannot access the API directly, they can access the API through the proxy. An attacker may be able to escalate this SSRF-style access to remote code execution. The mitmproxy and mitmdump tools are unaffected. Only mitmweb is affected. This vulnerability has been fixed in mitmproxy 11.1.2 and above. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Incorrect privilege assignment vulnerability in the WEB UI (the setting page) exists in Wi-Fi AP UNIT 'AC-WPS-11ac series'. If exploited, a remote attacker who can log in to the product may alter the settings without appropriate privileges. |
| A vulnerability in the web-based management interface of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface.
This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| A vulnerability in the API subsystem of Cisco Unified Intelligence Center could allow an authenticated, remote attacker to obtain sensitive information from an affected system.
This vulnerability is due to improper validation of requests to certain API endpoints. An attacker could exploit this vulnerability by sending a valid request to a specific API endpoint within the affected system. A successful exploit could allow a low-privileged user to view sensitive information on the affected system that should be restricted. To exploit this vulnerability, the attacker must have valid user credentials on the affected system. |
| A vulnerability was found in ESAFENET CDG 5.6.3.154.205_20250114. It has been classified as critical. Affected is an unknown function of the file addPolicyToSafetyGroup.jsp. The manipulation of the argument safetyGroupId leads to sql injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Allims lab.online up to 20250201 and classified as critical. This issue affects some unknown processing of the file /model/model_recuperar_senha.php. The manipulation of the argument recuperacao leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in Pix Software Vivaz 6.0.10 and classified as critical. This vulnerability affects unknown code of the file /servlet?act=login. The manipulation of the argument usuario leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability, which was classified as critical, has been found in xxyopen Novel up to 3.4.1. Affected by this issue is some unknown functionality of the file /api/front/search/books. The manipulation of the argument sort leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. Other parameters might be affected as well. |
| The file mexcel.php in the Vfront 0.99.52 codebase contains a vulnerable call to unserialize(base64_decode($_POST['mexcel'])), where $_POST['mexcel'] is user-controlled input. This input is decoded from base64 and deserialized without validation or use of the allowed_classes option, allowing an attacker to inject arbitrary PHP objects. This can lead to malicious behavior, such as Remote Code Execution (RCE), SQL Injection, Path Traversal, or Denial of Service, depending on the availability of exploitable classes in the Vfront codebase or its dependencies. |
