| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
clk: rockchip: Fix memory leak in rockchip_clk_register_pll()
If clk_register() fails, @pll->rate_table may have allocated memory by
kmemdup(), so it needs to be freed, otherwise will cause memory leak
issue, this patch fixes it. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/mediatek: Check return value after calling platform_get_resource()
platform_get_resource() may return NULL pointer, we need check its
return value to avoid null-ptr-deref in resource_size(). |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (coretemp) Simplify platform device handling
Coretemp's platform driver is unconventional. All the real work is done
globally by the initcall and CPU hotplug notifiers, while the "driver"
effectively just wraps an allocation and the registration of the hwmon
interface in a long-winded round-trip through the driver core. The whole
logic of dynamically creating and destroying platform devices to bring
the interfaces up and down is error prone, since it assumes
platform_device_add() will synchronously bind the driver and set drvdata
before it returns, thus results in a NULL dereference if drivers_autoprobe
is turned off for the platform bus. Furthermore, the unusual approach of
doing that from within a CPU hotplug notifier, already commented in the
code that it deadlocks suspend, also causes lockdep issues for other
drivers or subsystems which may want to legitimately register a CPU
hotplug notifier from a platform bus notifier.
All of these issues can be solved by ripping this unusual behaviour out
completely, simply tying the platform devices to the lifetime of the
module itself, and directly managing the hwmon interfaces from the
hotplug notifiers. There is a slight user-visible change in that
/sys/bus/platform/drivers/coretemp will no longer appear, and
/sys/devices/platform/coretemp.n will remain present if package n is
hotplugged off, but hwmon users should really only be looking for the
presence of the hwmon interfaces, whose behaviour remains unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: Revert "scsi: core: Do not increase scsi_device's iorequest_cnt if dispatch failed"
The "atomic_inc(&cmd->device->iorequest_cnt)" in scsi_queue_rq() would
cause kernel panic because cmd->device may be freed after returning from
scsi_dispatch_cmd().
This reverts commit cfee29ffb45b1c9798011b19d454637d1b0fe87d. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip: Fix refcount leak in platform_irqchip_probe
of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi_si: fix a memleak in try_smi_init()
Kmemleak reported the following leak info in try_smi_init():
unreferenced object 0xffff00018ecf9400 (size 1024):
comm "modprobe", pid 2707763, jiffies 4300851415 (age 773.308s)
backtrace:
[<000000004ca5b312>] __kmalloc+0x4b8/0x7b0
[<00000000953b1072>] try_smi_init+0x148/0x5dc [ipmi_si]
[<000000006460d325>] 0xffff800081b10148
[<0000000039206ea5>] do_one_initcall+0x64/0x2a4
[<00000000601399ce>] do_init_module+0x50/0x300
[<000000003c12ba3c>] load_module+0x7a8/0x9e0
[<00000000c246fffe>] __se_sys_init_module+0x104/0x180
[<00000000eea99093>] __arm64_sys_init_module+0x24/0x30
[<0000000021b1ef87>] el0_svc_common.constprop.0+0x94/0x250
[<0000000070f4f8b7>] do_el0_svc+0x48/0xe0
[<000000005a05337f>] el0_svc+0x24/0x3c
[<000000005eb248d6>] el0_sync_handler+0x160/0x164
[<0000000030a59039>] el0_sync+0x160/0x180
The problem was that when an error occurred before handlers registration
and after allocating `new_smi->si_sm`, the variable wouldn't be freed in
the error handling afterwards since `shutdown_smi()` hadn't been
registered yet. Fix it by adding a `kfree()` in the error handling path
in `try_smi_init()`. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: fbcon: release buffer when fbcon_do_set_font() failed
syzbot is reporting memory leak at fbcon_do_set_font() [1], for
commit a5a923038d70 ("fbdev: fbcon: Properly revert changes when
vc_resize() failed") missed that the buffer might be newly allocated
by fbcon_set_font(). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-ish-hid: Fix kernel panic during warm reset
During warm reset device->fw_client is set to NULL. If a bus driver is
registered after this NULL setting and before new firmware clients are
enumerated by ISHTP, kernel panic will result in the function
ishtp_cl_bus_match(). This is because of reference to
device->fw_client->props.protocol_name.
ISH firmware after getting successfully loaded, sends a warm reset
notification to remove all clients from the bus and sets
device->fw_client to NULL. Until kernel v5.15, all enabled ISHTP kernel
module drivers were loaded right after any of the first ISHTP device was
registered, regardless of whether it was a matched or an unmatched
device. This resulted in all drivers getting registered much before the
warm reset notification from ISH.
Starting kernel v5.16, this issue got exposed after the change was
introduced to load only bus drivers for the respective matching devices.
In this scenario, cros_ec_ishtp device and cros_ec_ishtp driver are
registered after the warm reset device fw_client NULL setting.
cros_ec_ishtp driver_register() triggers the callback to
ishtp_cl_bus_match() to match ISHTP driver to the device and causes kernel
panic in guid_equal() when dereferencing fw_client NULL pointer to get
protocol_name. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: fix undefined behavior in bit shift for TTM_TT_FLAG_PRIV_POPULATED
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in ./include/drm/ttm/ttm_tt.h:122:26
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
ttm_bo_move_memcpy+0x3b4/0x460 [ttm]
bo_driver_move+0x32/0x40 [drm_vram_helper]
ttm_bo_handle_move_mem+0x118/0x200 [ttm]
ttm_bo_validate+0xfa/0x220 [ttm]
drm_gem_vram_pin_locked+0x70/0x1b0 [drm_vram_helper]
drm_gem_vram_pin+0x48/0xb0 [drm_vram_helper]
drm_gem_vram_plane_helper_prepare_fb+0x53/0xe0 [drm_vram_helper]
drm_gem_vram_simple_display_pipe_prepare_fb+0x26/0x30 [drm_vram_helper]
drm_simple_kms_plane_prepare_fb+0x4d/0xe0 [drm_kms_helper]
drm_atomic_helper_prepare_planes+0xda/0x210 [drm_kms_helper]
drm_atomic_helper_commit+0xc3/0x1e0 [drm_kms_helper]
drm_atomic_commit+0x9c/0x160 [drm]
drm_client_modeset_commit_atomic+0x33a/0x380 [drm]
drm_client_modeset_commit_locked+0x77/0x220 [drm]
drm_client_modeset_commit+0x31/0x60 [drm]
__drm_fb_helper_restore_fbdev_mode_unlocked+0xa7/0x170 [drm_kms_helper]
drm_fb_helper_set_par+0x51/0x90 [drm_kms_helper]
fbcon_init+0x316/0x790
visual_init+0x113/0x1d0
do_bind_con_driver+0x2a3/0x5c0
do_take_over_console+0xa9/0x270
do_fbcon_takeover+0xa1/0x170
do_fb_registered+0x2a8/0x340
fbcon_fb_registered+0x47/0xe0
register_framebuffer+0x294/0x4a0
__drm_fb_helper_initial_config_and_unlock+0x43c/0x880 [drm_kms_helper]
drm_fb_helper_initial_config+0x52/0x80 [drm_kms_helper]
drm_fbdev_client_hotplug+0x156/0x1b0 [drm_kms_helper]
drm_fbdev_generic_setup+0xfc/0x290 [drm_kms_helper]
bochs_pci_probe+0x6ca/0x772 [bochs]
local_pci_probe+0x4d/0xb0
pci_device_probe+0x119/0x320
really_probe+0x181/0x550
__driver_probe_device+0xc6/0x220
driver_probe_device+0x32/0x100
__driver_attach+0x195/0x200
bus_for_each_dev+0xbb/0x120
driver_attach+0x27/0x30
bus_add_driver+0x22e/0x2f0
driver_register+0xa9/0x190
__pci_register_driver+0x90/0xa0
bochs_pci_driver_init+0x52/0x1000 [bochs]
do_one_initcall+0x76/0x430
do_init_module+0x61/0x28a
load_module+0x1f82/0x2e50
__do_sys_finit_module+0xf8/0x190
__x64_sys_finit_module+0x23/0x30
do_syscall_64+0x58/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
mt76: mt7921: fix kernel panic by accessing unallocated eeprom.data
The MT7921 driver no longer uses eeprom.data, but the relevant code has not
been removed completely since
commit 16d98b548365 ("mt76: mt7921: rely on mcu_get_nic_capability").
This could result in potential invalid memory access.
To fix the kernel panic issue in mt7921, it is necessary to avoid accessing
unallocated eeprom.data which can lead to invalid memory access.
Furthermore, it is possible to entirely eliminate the
mt7921_mcu_parse_eeprom function and solely depend on
mt7921_mcu_parse_response to divide the RxD header.
[2.702735] BUG: kernel NULL pointer dereference, address: 0000000000000550
[2.702740] #PF: supervisor write access in kernel mode
[2.702741] #PF: error_code(0x0002) - not-present page
[2.702743] PGD 0 P4D 0
[2.702747] Oops: 0002 [#1] PREEMPT SMP NOPTI
[2.702755] RIP: 0010:mt7921_mcu_parse_response+0x147/0x170 [mt7921_common]
[2.702758] RSP: 0018:ffffae7c00fef828 EFLAGS: 00010286
[2.702760] RAX: ffffa367f57be024 RBX: ffffa367cc7bf500 RCX: 0000000000000000
[2.702762] RDX: 0000000000000550 RSI: 0000000000000000 RDI: ffffa367cc7bf500
[2.702763] RBP: ffffae7c00fef840 R08: ffffa367cb167000 R09: 0000000000000005
[2.702764] R10: 0000000000000000 R11: ffffffffc04702e4 R12: ffffa367e8329f40
[2.702766] R13: 0000000000000000 R14: 0000000000000001 R15: ffffa367e8329f40
[2.702768] FS: 000079ee6cf20c40(0000) GS:ffffa36b2f940000(0000) knlGS:0000000000000000
[2.702769] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[2.702775] CR2: 0000000000000550 CR3: 00000001233c6004 CR4: 0000000000770ee0
[2.702776] PKRU: 55555554
[2.702777] Call Trace:
[2.702782] mt76_mcu_skb_send_and_get_msg+0xc3/0x11e [mt76 <HASH:1bc4 5>]
[2.702785] mt7921_run_firmware+0x241/0x853 [mt7921_common <HASH:6a2f 6>]
[2.702789] mt7921e_mcu_init+0x2b/0x56 [mt7921e <HASH:d290 7>]
[2.702792] mt7921_register_device+0x2eb/0x5a5 [mt7921_common <HASH:6a2f 6>]
[2.702795] ? mt7921_irq_tasklet+0x1d4/0x1d4 [mt7921e <HASH:d290 7>]
[2.702797] mt7921_pci_probe+0x2d6/0x319 [mt7921e <HASH:d290 7>]
[2.702799] pci_device_probe+0x9f/0x12a |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix kernel crash due to null io->bio
We should return when io->bio is null before doing anything. Otherwise, panic.
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:__submit_merged_write_cond+0x164/0x240 [f2fs]
Call Trace:
<TASK>
f2fs_submit_merged_write+0x1d/0x30 [f2fs]
commit_checkpoint+0x110/0x1e0 [f2fs]
f2fs_write_checkpoint+0x9f7/0xf00 [f2fs]
? __pfx_issue_checkpoint_thread+0x10/0x10 [f2fs]
__checkpoint_and_complete_reqs+0x84/0x190 [f2fs]
? preempt_count_add+0x82/0xc0
? __pfx_issue_checkpoint_thread+0x10/0x10 [f2fs]
issue_checkpoint_thread+0x4c/0xf0 [f2fs]
? __pfx_autoremove_wake_function+0x10/0x10
kthread+0xff/0x130
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: APEI: send SIGBUS to current task if synchronous memory error not recovered
If a synchronous error is detected as a result of user-space process
triggering a 2-bit uncorrected error, the CPU will take a synchronous
error exception such as Synchronous External Abort (SEA) on Arm64. The
kernel will queue a memory_failure() work which poisons the related
page, unmaps the page, and then sends a SIGBUS to the process, so that
a system wide panic can be avoided.
However, no memory_failure() work will be queued when abnormal
synchronous errors occur. These errors can include situations like
invalid PA, unexpected severity, no memory failure config support,
invalid GUID section, etc. In such a case, the user-space process will
trigger SEA again. This loop can potentially exceed the platform
firmware threshold or even trigger a kernel hard lockup, leading to a
system reboot.
Fix it by performing a force kill if no memory_failure() work is queued
for synchronous errors.
[ rjw: Changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - flush misc workqueue during device shutdown
Repeated loading and unloading of a device specific QAT driver, for
example qat_4xxx, in a tight loop can lead to a crash due to a
use-after-free scenario. This occurs when a power management (PM)
interrupt triggers just before the device-specific driver (e.g.,
qat_4xxx.ko) is unloaded, while the core driver (intel_qat.ko) remains
loaded.
Since the driver uses a shared workqueue (`qat_misc_wq`) across all
devices and owned by intel_qat.ko, a deferred routine from the
device-specific driver may still be pending in the queue. If this
routine executes after the driver is unloaded, it can dereference freed
memory, resulting in a page fault and kernel crash like the following:
BUG: unable to handle page fault for address: ffa000002e50a01c
#PF: supervisor read access in kernel mode
RIP: 0010:pm_bh_handler+0x1d2/0x250 [intel_qat]
Call Trace:
pm_bh_handler+0x1d2/0x250 [intel_qat]
process_one_work+0x171/0x340
worker_thread+0x277/0x3a0
kthread+0xf0/0x120
ret_from_fork+0x2d/0x50
To prevent this, flush the misc workqueue during device shutdown to
ensure that all pending work items are completed before the driver is
unloaded.
Note: This approach may slightly increase shutdown latency if the
workqueue contains jobs from other devices, but it ensures correctness
and stability. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: Add missing lock in cfg80211_check_and_end_cac()
Callers of wdev_chandef() must hold the wiphy mutex.
But the worker cfg80211_propagate_cac_done_wk() never takes the lock.
Which triggers the warning below with the mesh_peer_connected_dfs
test from hostapd and not (yet) released mac80211 code changes:
WARNING: CPU: 0 PID: 495 at net/wireless/chan.c:1552 wdev_chandef+0x60/0x165
Modules linked in:
CPU: 0 UID: 0 PID: 495 Comm: kworker/u4:2 Not tainted 6.14.0-rc5-wt-g03960e6f9d47 #33 13c287eeabfe1efea01c0bcc863723ab082e17cf
Workqueue: cfg80211 cfg80211_propagate_cac_done_wk
Stack:
00000000 00000001 ffffff00 6093267c
00000000 6002ec30 6d577c50 60037608
00000000 67e8d108 6063717b 00000000
Call Trace:
[<6002ec30>] ? _printk+0x0/0x98
[<6003c2b3>] show_stack+0x10e/0x11a
[<6002ec30>] ? _printk+0x0/0x98
[<60037608>] dump_stack_lvl+0x71/0xb8
[<6063717b>] ? wdev_chandef+0x60/0x165
[<6003766d>] dump_stack+0x1e/0x20
[<6005d1b7>] __warn+0x101/0x20f
[<6005d3a8>] warn_slowpath_fmt+0xe3/0x15d
[<600b0c5c>] ? mark_lock.part.0+0x0/0x4ec
[<60751191>] ? __this_cpu_preempt_check+0x0/0x16
[<600b11a2>] ? mark_held_locks+0x5a/0x6e
[<6005d2c5>] ? warn_slowpath_fmt+0x0/0x15d
[<60052e53>] ? unblock_signals+0x3a/0xe7
[<60052f2d>] ? um_set_signals+0x2d/0x43
[<60751191>] ? __this_cpu_preempt_check+0x0/0x16
[<607508b2>] ? lock_is_held_type+0x207/0x21f
[<6063717b>] wdev_chandef+0x60/0x165
[<605f89b4>] regulatory_propagate_dfs_state+0x247/0x43f
[<60052f00>] ? um_set_signals+0x0/0x43
[<605e6bfd>] cfg80211_propagate_cac_done_wk+0x3a/0x4a
[<6007e460>] process_scheduled_works+0x3bc/0x60e
[<6007d0ec>] ? move_linked_works+0x4d/0x81
[<6007d120>] ? assign_work+0x0/0xaa
[<6007f81f>] worker_thread+0x220/0x2dc
[<600786ef>] ? set_pf_worker+0x0/0x57
[<60087c96>] ? to_kthread+0x0/0x43
[<6008ab3c>] kthread+0x2d3/0x2e2
[<6007f5ff>] ? worker_thread+0x0/0x2dc
[<6006c05b>] ? calculate_sigpending+0x0/0x56
[<6003b37d>] new_thread_handler+0x4a/0x64
irq event stamp: 614611
hardirqs last enabled at (614621): [<00000000600bc96b>] __up_console_sem+0x82/0xaf
hardirqs last disabled at (614630): [<00000000600bc92c>] __up_console_sem+0x43/0xaf
softirqs last enabled at (614268): [<00000000606c55c6>] __ieee80211_wake_queue+0x933/0x985
softirqs last disabled at (614266): [<00000000606c52d6>] __ieee80211_wake_queue+0x643/0x985 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: limit repeated connections from clients with the same IP
Repeated connections from clients with the same IP address may exhaust
the max connections and prevent other normal client connections.
This patch limit repeated connections from clients with the same IP. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: core: do not bypass hid_hw_raw_request
hid_hw_raw_request() is actually useful to ensure the provided buffer
and length are valid. Directly calling in the low level transport driver
function bypassed those checks and allowed invalid paramto be used. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/amlogic: Replace smp_processor_id() with raw_smp_processor_id() in meson_ddr_pmu_create()
The Amlogic DDR PMU driver meson_ddr_pmu_create() function incorrectly uses
smp_processor_id(), which assumes disabled preemption. This leads to kernel
warnings during module loading because meson_ddr_pmu_create() can be called
in a preemptible context.
Following kernel warning and stack trace:
[ 31.745138] [ T2289] BUG: using smp_processor_id() in preemptible [00000000] code: (udev-worker)/2289
[ 31.745154] [ T2289] caller is debug_smp_processor_id+0x28/0x38
[ 31.745172] [ T2289] CPU: 4 UID: 0 PID: 2289 Comm: (udev-worker) Tainted: GW 6.14.0-0-MANJARO-ARM #1 59519addcbca6ba8de735e151fd7b9e97aac7ff0
[ 31.745181] [ T2289] Tainted: [W]=WARN
[ 31.745183] [ T2289] Hardware name: Hardkernel ODROID-N2Plus (DT)
[ 31.745188] [ T2289] Call trace:
[ 31.745191] [ T2289] show_stack+0x28/0x40 (C)
[ 31.745199] [ T2289] dump_stack_lvl+0x4c/0x198
[ 31.745205] [ T2289] dump_stack+0x20/0x50
[ 31.745209] [ T2289] check_preemption_disabled+0xec/0xf0
[ 31.745213] [ T2289] debug_smp_processor_id+0x28/0x38
[ 31.745216] [ T2289] meson_ddr_pmu_create+0x200/0x560 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[ 31.745237] [ T2289] g12_ddr_pmu_probe+0x20/0x38 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[ 31.745246] [ T2289] platform_probe+0x98/0xe0
[ 31.745254] [ T2289] really_probe+0x144/0x3f8
[ 31.745258] [ T2289] __driver_probe_device+0xb8/0x180
[ 31.745261] [ T2289] driver_probe_device+0x54/0x268
[ 31.745264] [ T2289] __driver_attach+0x11c/0x288
[ 31.745267] [ T2289] bus_for_each_dev+0xfc/0x160
[ 31.745274] [ T2289] driver_attach+0x34/0x50
[ 31.745277] [ T2289] bus_add_driver+0x160/0x2b0
[ 31.745281] [ T2289] driver_register+0x78/0x120
[ 31.745285] [ T2289] __platform_driver_register+0x30/0x48
[ 31.745288] [ T2289] init_module+0x30/0xfe0 [meson_ddr_pmu_g12 8095101c49676ad138d9961e3eddaee10acca7bd]
[ 31.745298] [ T2289] do_one_initcall+0x11c/0x438
[ 31.745303] [ T2289] do_init_module+0x68/0x228
[ 31.745311] [ T2289] load_module+0x118c/0x13a8
[ 31.745315] [ T2289] __arm64_sys_finit_module+0x274/0x390
[ 31.745320] [ T2289] invoke_syscall+0x74/0x108
[ 31.745326] [ T2289] el0_svc_common+0x90/0xf8
[ 31.745330] [ T2289] do_el0_svc+0x2c/0x48
[ 31.745333] [ T2289] el0_svc+0x60/0x150
[ 31.745337] [ T2289] el0t_64_sync_handler+0x80/0x118
[ 31.745341] [ T2289] el0t_64_sync+0x1b8/0x1c0
Changes replaces smp_processor_id() with raw_smp_processor_id() to
ensure safe CPU ID retrieval in preemptible contexts. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check dce_hwseq before dereferencing it
[WHAT]
hws was checked for null earlier in dce110_blank_stream, indicating hws
can be null, and should be checked whenever it is used.
(cherry picked from commit 79db43611ff61280b6de58ce1305e0b2ecf675ad) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent out-of-bounds stream writes by validating *pos
ksmbd_vfs_stream_write() did not validate whether the write offset
(*pos) was within the bounds of the existing stream data length (v_len).
If *pos was greater than or equal to v_len, this could lead to an
out-of-bounds memory write.
This patch adds a check to ensure *pos is less than v_len before
proceeding. If the condition fails, -EINVAL is returned. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Fix kernel crash due to PR_SET_TAGGED_ADDR_CTRL
When userspace does PR_SET_TAGGED_ADDR_CTRL, but Supm extension is not
available, the kernel crashes:
Oops - illegal instruction [#1]
[snip]
epc : set_tagged_addr_ctrl+0x112/0x15a
ra : set_tagged_addr_ctrl+0x74/0x15a
epc : ffffffff80011ace ra : ffffffff80011a30 sp : ffffffc60039be10
[snip]
status: 0000000200000120 badaddr: 0000000010a79073 cause: 0000000000000002
set_tagged_addr_ctrl+0x112/0x15a
__riscv_sys_prctl+0x352/0x73c
do_trap_ecall_u+0x17c/0x20c
andle_exception+0x150/0x15c
Fix it by checking if Supm is available. |
