| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gicv3: Workaround for NVIDIA erratum T241-FABRIC-4
The T241 platform suffers from the T241-FABRIC-4 erratum which causes
unexpected behavior in the GIC when multiple transactions are received
simultaneously from different sources. This hardware issue impacts
NVIDIA server platforms that use more than two T241 chips
interconnected. Each chip has support for 320 {E}SPIs.
This issue occurs when multiple packets from different GICs are
incorrectly interleaved at the target chip. The erratum text below
specifies exactly what can cause multiple transfer packets susceptible
to interleaving and GIC state corruption. GIC state corruption can
lead to a range of problems, including kernel panics, and unexpected
behavior.
>From the erratum text:
"In some cases, inter-socket AXI4 Stream packets with multiple
transfers, may be interleaved by the fabric when presented to ARM
Generic Interrupt Controller. GIC expects all transfers of a packet
to be delivered without any interleaving.
The following GICv3 commands may result in multiple transfer packets
over inter-socket AXI4 Stream interface:
- Register reads from GICD_I* and GICD_N*
- Register writes to 64-bit GICD registers other than GICD_IROUTERn*
- ITS command MOVALL
Multiple commands in GICv4+ utilize multiple transfer packets,
including VMOVP, VMOVI, VMAPP, and 64-bit register accesses."
This issue impacts system configurations with more than 2 sockets,
that require multi-transfer packets to be sent over inter-socket
AXI4 Stream interface between GIC instances on different sockets.
GICv4 cannot be supported. GICv3 SW model can only be supported
with the workaround. Single and Dual socket configurations are not
impacted by this issue and support GICv3 and GICv4."
Writing to the chip alias region of the GICD_In{E} registers except
GICD_ICENABLERn has an equivalent effect as writing to the global
distributor. The SPI interrupt deactivate path is not impacted by
the erratum.
To fix this problem, implement a workaround that ensures read accesses
to the GICD_In{E} registers are directed to the chip that owns the
SPI, and disable GICv4.x features. To simplify code changes, the
gic_configure_irq() function uses the same alias region for both read
and write operations to GICD_ICFGR. |
| H3C SSL VPN contains a user enumeration vulnerability that allows attackers to identify valid usernames through the 'txtUsrName' POST parameter. Attackers can submit different usernames to the login_submit.cgi endpoint and analyze response messages to distinguish between existing and non-existing accounts. |
| Anevia Flamingo XL 3.2.9 contains a restricted shell vulnerability that allows remote attackers to escape the sandboxed environment through the traceroute command. Attackers can exploit the traceroute command to inject shell commands and gain full root access to the device by bypassing the restricted login environment. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic at
once. |
| Akuvox Smart Intercom S539 contains an improper access control vulnerability that allows users with 'User' privileges to modify API access settings and configurations. Attackers can exploit this vulnerability to escalate privileges and gain unauthorized access to administrative functionalities. |
| A security flaw has been discovered in BiggiDroid Simple PHP CMS 1.0. This impacts an unknown function of the file /admin/edit.php of the component Site Logo Handler. Performing manipulation of the argument image results in unrestricted upload. Remote exploitation of the attack is possible. The exploit has been released to the public and may be exploited. |
| In the Linux kernel, the following vulnerability has been resolved:
kernel/fail_function: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once. |
| When system.enableCrossNamespaceCommands is enabled (on by default), the Temporal server permits certain workflow task commands (e.g. StartChildWorkflowExecution, SignalExternalWorkflowExecution, RequestCancelExternalWorkflowExecution) to target a different namespace than the namespace authorized at the gRPC boundary. The frontend authorizes RespondWorkflowTaskCompleted based on the outer request namespace, but the history service later resolves and executes the command using the namespace embedded in command attributes without authorizing the caller for that target namespace. This can allow a worker authorized for one namespace to create, signal, or cancel workflows in another namespace.
This issue affects Temporal: through 1.29.1. Fixed in 1.27.4, 1.28.2, 1.29.2. |
| A vulnerability was detected in itsourcecode Society Management System 1.0. Impacted is the function edit_admin_query of the file /admin/edit_admin_query.php. Performing manipulation of the argument Username results in sql injection. It is possible to initiate the attack remotely. The exploit is now public and may be used. |
| A vulnerability was determined in newbee-mall-plus 2.0.0. This impacts the function Upload of the file src/main/java/ltd/newbee/mall/controller/common/UploadController.java of the component Product Information Edit Page. This manipulation of the argument File causes unrestricted upload. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| SOUND4 IMPACT/FIRST/PULSE/Eco versions 2.x contains a network vulnerability that allows unauthenticated attackers to send ICMP signals to arbitrary hosts through network command scripts. Attackers can abuse ping.php, traceroute.php, and dns.php to generate network flooding attacks targeting external hosts. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: do not write dirty data after degenerating to read-only
According to syzbot's report, mark_buffer_dirty() called from
nilfs_segctor_do_construct() outputs a warning with some patterns after
nilfs2 detects metadata corruption and degrades to read-only mode.
After such read-only degeneration, page cache data may be cleared through
nilfs_clear_dirty_page() which may also clear the uptodate flag for their
buffer heads. However, even after the degeneration, log writes are still
performed by unmount processing etc., which causes mark_buffer_dirty() to
be called for buffer heads without the "uptodate" flag and causes the
warning.
Since any writes should not be done to a read-only file system in the
first place, this fixes the warning in mark_buffer_dirty() by letting
nilfs_segctor_do_construct() abort early if in read-only mode.
This also changes the retry check of nilfs_segctor_write_out() to avoid
unnecessary log write retries if it detects -EROFS that
nilfs_segctor_do_construct() returned. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: chipidea: fix memory leak with using debugfs_lookup()
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once. |
| MiniDVBLinux 5.4 contains a remote command execution vulnerability that allows unauthenticated attackers to execute arbitrary commands as root through the 'command' GET parameter. Attackers can exploit the /tpl/commands.sh endpoint by sending malicious command values to gain root-level system access. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Wait for io return on terminate rport
System crash due to use after free.
Current code allows terminate_rport_io to exit before making
sure all IOs has returned. For FCP-2 device, IO's can hang
on in HW because driver has not tear down the session in FW at
first sign of cable pull. When dev_loss_tmo timer pops,
terminate_rport_io is called and upper layer is about to
free various resources. Terminate_rport_io trigger qla to do
the final cleanup, but the cleanup might not be fast enough where it
leave qla still holding on to the same resource.
Wait for IO's to return to upper layer before resources are freed. |
| A vulnerability was found in D-Link DI-7400G+ 19.12.25A1. This affects an unknown function of the file /msp_info.htm?flag=cmd. The manipulation of the argument cmd results in command injection. The attack can be launched remotely. The exploit has been made public and could be used. |
| URI is a module providing classes to handle Uniform Resource Identifiers. In versions prior to 0.12.5, 0.13.3, and 1.0.4, a bypass exists for the fix to CVE-2025-27221 that can expose user credentials. When using the `+` operator to combine URIs, sensitive information like passwords from the original URI can be leaked, violating RFC3986 and making applications vulnerable to credential exposure. Versions 0.12.5, 0.13.3, and 1.0.4 fix the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211_hwsim: drop short frames
While technically some control frames like ACK are shorter and
end after Address 1, such frames shouldn't be forwarded through
wmediumd or similar userspace, so require the full 3-address
header to avoid accessing invalid memory if shorter frames are
passed in. |
| SOUND4 IMPACT/FIRST/PULSE/Eco versions 2.x and below contain hardcoded credentials embedded in server binaries that cannot be modified through normal device operations. Attackers can leverage these static credentials to gain unauthorized access to the device across Linux and Windows distributions without requiring user interaction. |
| In the Linux kernel, the following vulnerability has been resolved:
recordmcount: Fix memory leaks in the uwrite function
Common realloc mistake: 'file_append' nulled but not freed upon failure |
