| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Vim is an open source, command line text editor. From 9.2.0469 until 9.2.0843, popup_mark_opacity_zindex() in src/popupwin.c can use a negative w_winrow for a text-property-anchored popup with clipwindow and opacity, indexing before the screen array instead of accounting for w_popup_topoff and causing an out-of-bounds read and conditional write. This issue is fixed in version 9.2.0843. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: virtio: reset device before deleting virtqueues
virtsnd_remove() and virtsnd_freeze() delete the virtqueues before
resetting the device. del_vqs() frees the vring backing, but does not
provide a generic device quiesce operation. In particular, modern
virtio-pci keeps enabled queues active until the device is reset.
Reset the device before deleting the virtqueues so it can no longer
access the vring memory when that memory is released. This also covers
probe failures after DRIVER_OK, which unwind through virtsnd_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Also allocate private hash on vfork()
As Jann demonstrated, it is entirely feasible to access the mm through vfork().
Therefore we need to allocate a private hash on vfork() as well as any other
CLONE_VM user.
Specifically, it must be avoided to have (private) futex waiters before
allocating the private hash. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: reject RTN_UNREACHABLE input routes in icmp_route_lookup
When the forward output route cannot be used in icmp_route_lookup(),
it enters the "reverse path" and calls ip_route_input() on fl4_dec.daddr,
the original packet's source address.
ip_route_input() only returns an error for truly invalid packets. For
unreachable addresses it will succeed and return an input route whose
dst.output is set to ip_rt_bug(). The existing check only rejects
RTN_LOCAL routes, so the RTN_UNREACHABLE route types can still be returned
and later used for output, syzkaller triggering a WARN_ON_ONCE()
in ip_rt_bug() as bellow:
------------[ cut here ]------------
WARNING: net/ipv4/route.c:1273 at ip_rt_bug+0x14/0x20
RIP: 0010:ip_rt_bug+0x14/0x20
Call Trace:
ip_push_pending_frames+0xfa/0x100
__icmp_send+0x905/0xf10
ip_options_compile+0xc0/0xd0
ip_rcv_finish_core+0x321/0xae0
ip_rcv+0x1de/0x260
__netif_receive_skb_one_core+0x11a/0x130
netif_receive_skb+0x7b/0x260
tun_get_user+0x11bf/0x1c10
------------[ cut here ]------------
Reject input route that is RTN_UNREACHABLE to fix it. The net warning
is only printed for RTN_LOCAL, as RTN_UNREACHABLE is not the result of
a race condition. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mxl862xx: disable the stats poll on teardown
mxl862xx_setup() arms the stats poll before mxl862xx_setup_mdio(), and
nothing stops it until dsa_register_switch() has returned an error to
mxl862xx_probe(). DSA frees the dsa_port list before it returns, so a
poll that fires once .setup or a later step of dsa_tree_setup() has
failed walks freed ports. On shutdown the user ports stay registered,
and the WORK_STOPPED flag test in mxl862xx_get_stats64() is not atomic
with the cancel in mxl862xx_shutdown(), so a re-arm that read the flag
before it was set queues the poll after cancel_delayed_work_sync() has
returned.
Arm the poll once .setup has succeeded and stop it from a .teardown op,
which DSA calls on unregister and after a failed registration, in both
cases before it frees the ports. Use disable_delayed_work_sync() there
and in shutdown(): it drains a running poll as the cancel did and turns
every later attempt to queue the work into a no-op, so the re-arm
cannot bring the poll back. remove() and the probe error path only set
WORK_STOPPED, which crc_err_work tests before it walks the ports. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scpi: reject DVFS OPP count above MAX_DVFS_OPPS
scpi_dvfs_get_info() already rejected a zero opp_count, but still trusted
any larger value from the SCP firmware. The shared-memory reply only holds
MAX_DVFS_OPPS entries in buf.opps[]; a bigger count over-reads that array
and then sizes the allocated OPP table incorrectly (garbage OPPs / OOB).
The missing upper bound dates back to the original SCPI DVFS support.
Reject zero and out-of-range counts in one check and return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: hold net_device reference under RCU in bundle creation
xfrm_bundle_create() and xfrm_create_dummy_bundle() read dst->dev into
a local pointer without taking a device reference, then pass it to
xfrm_fill_dst(). A concurrent RTM_DELLINK replaces dst->dev via
dst_dev_put() and frees the old net_device, causing a use-after-free
when xfrm6_fill_dst() later dereferences the stale dev pointer.
BUG: KASAN: slab-use-after-free in xfrm6_fill_dst+0x82c/0x860
(net/ipv6/xfrm6_policy.c:86 netdev_hold())
Read of size 8 at addr ffff8880142fe588 by task exploit/153
Call Trace:
xfrm6_fill_dst+0x82c/0x860
xfrm_resolve_and_create_bundle+0x21d4/0x2bd0
xfrm_lookup_with_ifid+0x485/0x1640
ip6_dst_lookup_flow+0x19b/0x1e0
udpv6_sendmsg+0x1443/0x2dd0
Fix this by reading dst->dev via dst_dev_rcu() and keeping the RCU
read-side critical section active until xfrm_fill_dst() has taken the
required device references. |
| In the Linux kernel, the following vulnerability has been resolved:
esp: downgrade zerocopy managed frags before mutating skb frags
On the out-of-place output path (esp->inplace == false) ESP rewrites the
skb frag array: esp_output_head() appends a trailer frag and
esp_output_tail() replaces the frags with a destination page, both
referenced with get_page().
When the skb carries zerocopy managed frags (SKBFL_MANAGED_FRAG_REFS) the
payload frags are owned by the ubuf and must not be referenced or
unreferenced individually, but ESP mutates the frag array without ever
downgrading the skb. This breaks the managed-frag invariant two ways:
- esp_ssg_unref() walks the source scatterlist and drops a page
reference for every frag, including the ubuf-owned payload frags,
pushing their refcount below the GUP pin bias while the pages are
still pinned, i.e. a use-after-free of the zerocopy pages;
- esp_output_tail() installs its destination page as frag 0 with
get_page() but leaves SKBFL_MANAGED_FRAG_REFS set, so
skb_release_data() takes the skip_unref branch and never drops that
reference, leaking the x->xfrag page at packet rate.
Fix this the way every other frag-mutating site does (__ip_append_data(),
__ip6_append_data(), tcp_sendmsg_locked()) and call
skb_zcopy_downgrade_managed() before ESP touches the frag array: it takes
a real reference on each existing frag and clears SKBFL_MANAGED_FRAG_REFS,
so the per-frag unref in esp_ssg_unref() and the frag release in
skb_release_data() are both balanced and no mixed-ownership frag array is
left behind. |
| Pexip Infinity before 41.1 is affected by improper input validation in the media implementation that allows a remote attacker to trigger a software abort resulting in a denial of service. |
| Incorrect authorization in Accessibility in Google Chrome prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium) |
| Uninitialized resource in GPU in Google Chrome on on Android prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| Clickjacking in EVP in Google Chrome prior to 155.0.8059.39 allowed a remote attacker leveraging social engineering to spoof UI elements via a crafted HTML page. (Chromium security severity: Medium) |
| Race condition in CustomTabs in Google Chrome on on Android prior to 155.0.8059.39 allowed a local attacker to bypass web origin policy via a co-installed app. (Chromium security severity: Medium) |
| Out of bounds read in ANGLE in Google Chrome prior to 155.0.8059.39 allowed a remote attacker to read memory outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, RabbitMQ Management rendered an AMQP authorization-error reason containing an attacker-controlled queue name as HTML when the OAuth management UI was enabled. Exploitation requires an attacker with queue configure permission, a management administrator who can see but cannot read that queue, and the administrator clicking Get Message(s). A queue name containing a base element can then retarget the automatic relative refresh because the Content Security Policy omits base-uri and connect-src, and an attacker endpoint that permits the management origin through CORS can receive the victim's Authorization header. This issue is fixed in versions 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5. |
| Improper Encoding or Escaping of Output vulnerability in the RemoteSyslogAppender of Apache log4net.
Every character outside visible ASCII and space was removed from the record instead of being escaped, so non-ASCII text and control characters such as tabs disappeared without notice. A party whose data reaches a log message could make a distinct value look identical in the record, for example a user name holding a zero-width space logged as admin. Only applications that use RemoteSyslogAppender are affected.
This issue affects Apache log4net: from 1.2.12 before 3.5.0.
Users are recommended to upgrade to version 3.5.0, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
9p: Fix v9fs_issue_write() to update i_size and remote_i_size
Fix v9fs_issue_write() to update i_size and remote_i_size to the new size
of the server file if we made it larger, using the start fpos and the count
returned by p9_client_write() to calculate the new minimum file size.
This assumes that if the 9P server makes a short write (say it hits
ENOSPC), a reduced count is returned. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: check ras and obj before dereference
nbio_v7_9_handle_ras_controller_intr_no_bifring() dereferences ras and obj
without checking either for NULL. Both amdgpu_ras_get_context() and
amdgpu_ras_find_obj() can return NULL, e.g. during the window between
adev->nbio.ras being set (early in amdgpu_ras_init(), by design, to
enable the fatal-error interrupt as soon as possible) and the PCIE_BIF
ras object actually being created in RAS late_init. Any interrupt in that
window crashes in hard-IRQ context.
This is analogous to commit d190b459b2a4 ("drm/amdgpu: the warning
dereferencing obj for nbio_v7_4"), which fixed the same issue in the
nbio_v7_4 handler.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
(cherry picked from commit c7071767a50a32ed727cf800ac84372429e3b4b3) |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: do not leave stale header offsets after pskb_carve()
pskb_carve_inside_header() and pskb_carve_inside_nonlinear() remove
the first bytes of a packet and reallocate skb->head.
All the headers that were present before the operation are gone,
but both functions call skb_headers_offset_update(skb, 0), which
is a no-op : skb->mac_header, skb->network_header,
skb->transport_header and skb->csum_start keep their old values and
now describe bytes which are no longer there.
Both helpers size the new head from the old skb_end_offset(), so the
stale offsets still land inside the new allocation. They point past
skb_tail_pointer() though, to bytes that were never initialized.
pskb_carve_inside_nonlinear() is the worst case, because it leaves a
zombie skb with an empty linear part (skb->data ==
skb_tail_pointer(skb), skb_headlen(skb) == 0), while
skb_mac_header_was_set() is still true and skb->mac_header is way
ahead of skb->data.
The only user of pskb_extract() is rds_tcp_data_recv(), and the
carved skb is queued on tinc->ti_skb_list. When the RDS incoming
message is released, rds_tcp_inc_free() calls skb_queue_purge(),
which frees the skbs with SKB_DROP_REASON_QUEUE_PURGE. This is
visible from drop_monitor, which then tries to pull back to the
(bogus) mac header :
skbuff: __skb_pull(len=234)
skb len=6968 data_len=6968 headroom=0 headlen=0 tailroom=0
end-tail=384 mac=(234,14) mac_len=14 net=(248,40) trans=288
shinfo(txflags=0 nr_frags=1 gso(size=1428 type=16 segs=5))
csum(0x100120 start=288 offset=16 ip_summed=3 complete_sw=0 valid=1 level=0)
hash(0x7b446c6c sw=0 l4=1) proto=0x86dd pkttype=0 iif=60
kernel BUG at ./include/linux/skbuff.h:2847!
Add skb_carve_reset_headers() to mark the mac and transport headers
as not set, reset the network header, clear skb->mac_len, and drop
a now meaningless CHECKSUM_PARTIAL (csum_start no longer describes
anything).
Invalidate the inner offsets as well. Unlike mac_header and
transport_header they have no "unset" sentinel, so a leftover
non-zero value still looks like a real header. Zero
skb->inner_mac_header, skb->inner_network_header,
skb->inner_transport_header, skb->inner_protocol and
skb->encapsulation, so that all the header state is invalidated in
one place.
v2: fixed an inaccurate changelog. The stale offsets stay inside the
new skb->head, which is never smaller than the old one, they
simply point past skb_tail_pointer() to bytes that are gone.
Thanks to Xuanqiang Luo for insisting on this.
Also invalidate the inner header state, as suggested by the
netdev AI review :
https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260911114922.621937-1-edumazet%40google.com |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: prevent buffer overflow in page_pool allocation
The per‑processor buffering scheme is supported only if the
number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS (8).
This is already checked in mvpp2_probe() during the initial
activation of percpu_pools.
However, mvpp2_change_mtu() may later call
mvpp2_bm_switch_buffers(priv, true) without this check, which can
lead to an out-of-bounds access in the priv->page_pool array in
mvpp2_bm_init(). The array is sized to hold MVPP2_PORT_MAX_RXQ
entries, and mvpp2_get_nrxqs() may return exactly that value. The
per-CPU scheme then doubles it to nrxqs * 2, exceeding the array
bounds.
Check that the hardware version is MVPP22 or newer and that the
number of pools (nrxqs * 2) does not exceed MVPP2_BM_MAX_POOLS
before switching to per-CPU mode.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
