| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: mscc: ocelot: Fix use-after-free caused by cyclic delayed work
The origin code calls cancel_delayed_work() in ocelot_stats_deinit()
to cancel the cyclic delayed work item ocelot->stats_work. However,
cancel_delayed_work() may fail to cancel the work item if it is already
executing. While destroy_workqueue() does wait for all pending work items
in the work queue to complete before destroying the work queue, it cannot
prevent the delayed work item from being rescheduled within the
ocelot_check_stats_work() function. This limitation exists because the
delayed work item is only enqueued into the work queue after its timer
expires. Before the timer expiration, destroy_workqueue() has no visibility
of this pending work item. Once the work queue appears empty,
destroy_workqueue() proceeds with destruction. When the timer eventually
expires, the delayed work item gets queued again, leading to the following
warning:
workqueue: cannot queue ocelot_check_stats_work on wq ocelot-switch-stats
WARNING: CPU: 2 PID: 0 at kernel/workqueue.c:2255 __queue_work+0x875/0xaf0
...
RIP: 0010:__queue_work+0x875/0xaf0
...
RSP: 0018:ffff88806d108b10 EFLAGS: 00010086
RAX: 0000000000000000 RBX: 0000000000000101 RCX: 0000000000000027
RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffff88806d123e88
RBP: ffffffff813c3170 R08: 0000000000000000 R09: ffffed100da247d2
R10: ffffed100da247d1 R11: ffff88806d123e8b R12: ffff88800c00f000
R13: ffff88800d7285c0 R14: ffff88806d0a5580 R15: ffff88800d7285a0
FS: 0000000000000000(0000) GS:ffff8880e5725000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe18e45ea10 CR3: 0000000005e6c000 CR4: 00000000000006f0
Call Trace:
<IRQ>
? kasan_report+0xc6/0xf0
? __pfx_delayed_work_timer_fn+0x10/0x10
? __pfx_delayed_work_timer_fn+0x10/0x10
call_timer_fn+0x25/0x1c0
__run_timer_base.part.0+0x3be/0x8c0
? __pfx_delayed_work_timer_fn+0x10/0x10
? rcu_sched_clock_irq+0xb06/0x27d0
? __pfx___run_timer_base.part.0+0x10/0x10
? try_to_wake_up+0xb15/0x1960
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
tmigr_handle_remote_up+0x603/0x7e0
? __pfx_tmigr_handle_remote_up+0x10/0x10
? sched_balance_trigger+0x1c0/0x9f0
? sched_tick+0x221/0x5a0
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
? tick_nohz_handler+0x339/0x440
? __pfx_tmigr_handle_remote_up+0x10/0x10
__walk_groups.isra.0+0x42/0x150
tmigr_handle_remote+0x1f4/0x2e0
? __pfx_tmigr_handle_remote+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
? hrtimer_interrupt+0x322/0x780
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
The following diagram reveals the cause of the above warning:
CPU 0 (remove) | CPU 1 (delayed work callback)
mscc_ocelot_remove() |
ocelot_deinit() | ocelot_check_stats_work()
ocelot_stats_deinit() |
cancel_delayed_work()| ...
| queue_delayed_work()
destroy_workqueue() | (wait a time)
| __queue_work() //UAF
The above scenario actually constitutes a UAF vulnerability.
The ocelot_stats_deinit() is only invoked when initialization
failure or resource destruction, so we must ensure that any
delayed work items cannot be rescheduled.
Replace cancel_delayed_work() with disable_delayed_work_sync()
to guarantee proper cancellation of the delayed work item and
ensure completion of any currently executing work before the
workqueue is deallocated.
A deadlock concern was considered: ocelot_stats_deinit() is called
in a process context and is not holding any locks that the delayed
work item might also need. Therefore, the use of the _sync() variant
is safe here.
This bug was identified through static analysis. To reproduce the
issue and validate the fix, I simulated ocelot-swit
---truncated--- |
| An improper file signature check in Palo Alto Networks Cortex XDR agent may allow an attacker to bypass the Cortex XDR agent's executable blocking capabilities and run untrusted executables on the device. This issue can be leveraged to execute untrusted software without being detected or blocked. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: Avoid possible recursive deadlock in l2tp_tunnel_register()
When a file descriptor of pppol2tp socket is passed as file descriptor
of UDP socket, a recursive deadlock occurs in l2tp_tunnel_register().
This situation is reproduced by the following program:
int main(void)
{
int sock;
struct sockaddr_pppol2tp addr;
sock = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP);
if (sock < 0) {
perror("socket");
return 1;
}
addr.sa_family = AF_PPPOX;
addr.sa_protocol = PX_PROTO_OL2TP;
addr.pppol2tp.pid = 0;
addr.pppol2tp.fd = sock;
addr.pppol2tp.addr.sin_family = PF_INET;
addr.pppol2tp.addr.sin_port = htons(0);
addr.pppol2tp.addr.sin_addr.s_addr = inet_addr("192.168.0.1");
addr.pppol2tp.s_tunnel = 1;
addr.pppol2tp.s_session = 0;
addr.pppol2tp.d_tunnel = 0;
addr.pppol2tp.d_session = 0;
if (connect(sock, (const struct sockaddr *)&addr, sizeof(addr)) < 0) {
perror("connect");
return 1;
}
return 0;
}
This program causes the following lockdep warning:
============================================
WARNING: possible recursive locking detected
6.2.0-rc5-00205-gc96618275234 #56 Not tainted
--------------------------------------------
repro/8607 is trying to acquire lock:
ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: l2tp_tunnel_register+0x2b7/0x11c0
but task is already holding lock:
ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(sk_lock-AF_PPPOX);
lock(sk_lock-AF_PPPOX);
*** DEADLOCK ***
May be due to missing lock nesting notation
1 lock held by repro/8607:
#0: ffff8880213c8130 (sk_lock-AF_PPPOX){+.+.}-{0:0}, at: pppol2tp_connect+0xa82/0x1a30
stack backtrace:
CPU: 0 PID: 8607 Comm: repro Not tainted 6.2.0-rc5-00205-gc96618275234 #56
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x100/0x178
__lock_acquire.cold+0x119/0x3b9
? lockdep_hardirqs_on_prepare+0x410/0x410
lock_acquire+0x1e0/0x610
? l2tp_tunnel_register+0x2b7/0x11c0
? lock_downgrade+0x710/0x710
? __fget_files+0x283/0x3e0
lock_sock_nested+0x3a/0xf0
? l2tp_tunnel_register+0x2b7/0x11c0
l2tp_tunnel_register+0x2b7/0x11c0
? sprintf+0xc4/0x100
? l2tp_tunnel_del_work+0x6b0/0x6b0
? debug_object_deactivate+0x320/0x320
? lockdep_init_map_type+0x16d/0x7a0
? lockdep_init_map_type+0x16d/0x7a0
? l2tp_tunnel_create+0x2bf/0x4b0
? l2tp_tunnel_create+0x3c6/0x4b0
pppol2tp_connect+0x14e1/0x1a30
? pppol2tp_put_sk+0xd0/0xd0
? aa_sk_perm+0x2b7/0xa80
? aa_af_perm+0x260/0x260
? bpf_lsm_socket_connect+0x9/0x10
? pppol2tp_put_sk+0xd0/0xd0
__sys_connect_file+0x14f/0x190
__sys_connect+0x133/0x160
? __sys_connect_file+0x190/0x190
? lockdep_hardirqs_on+0x7d/0x100
? ktime_get_coarse_real_ts64+0x1b7/0x200
? ktime_get_coarse_real_ts64+0x147/0x200
? __audit_syscall_entry+0x396/0x500
__x64_sys_connect+0x72/0xb0
do_syscall_64+0x38/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
This patch fixes the issue by getting/creating the tunnel before
locking the pppol2tp socket. |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Write hgatp register with valid mode bits
According to the RISC-V Privileged Architecture Spec, when MODE=Bare
is selected,software must write zero to the remaining fields of hgatp.
We have detected the valid mode supported by the HW before, So using a
valid mode to detect how many vmid bits are supported. |
| Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in WN-7D36QR and WN-7D36QR/UE. If this vulnerability is exploited, an arbitrary OS command may be executed by a remote authenticated attacker. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Don't allow evicting of BOs in same VM in array of VM binds
An array of VM binds can potentially evict other buffer objects (BOs)
within the same VM under certain conditions, which may lead to NULL
pointer dereferences later in the bind pipeline. To prevent this, clear
the allow_res_evict flag in the xe_bo_validate call.
v2:
- Invert polarity of no_res_evict (Thomas)
- Add comment in code explaining issue (Thomas)
(cherry picked from commit 8b9ba8d6d95fe75fed6b0480bb03da4b321bea08) |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E
The ADSP firmware on X1E has separate firmware binaries for the main
firmware and the DTB. The same applies for the "lite" firmware loaded by
the boot firmware.
When preparing to load the new ADSP firmware we shutdown the lite_pas_id
for the main firmware, but we don't shutdown the corresponding lite pas_id
for the DTB. The fact that we're leaving it "running" forever becomes
obvious if you try to reuse (or just access) the memory region used by the
"lite" firmware: The &adsp_boot_mem is accessible, but accessing the
&adsp_boot_dtb_mem results in a crash.
We don't support reusing the memory regions currently, but nevertheless we
should not keep part of the lite firmware running. Fix this by adding the
lite_dtb_pas_id and shutting it down as well.
We don't have a way to detect if the lite firmware is actually running yet,
so ignore the return status of qcom_scm_pas_shutdown() for now. This was
already the case before, the assignment to "ret" is not used anywhere. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Daman Jeet Finale Lite finale-woocommerce-sales-countdown-timer-discount allows Reflected XSS.This issue affects Finale Lite: from n/a through <= 2.20.0. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Fix peer lookup in ath12k_dp_mon_rx_deliver_msdu()
In ath12k_dp_mon_rx_deliver_msdu(), peer lookup fails because
rxcb->peer_id is not updated with a valid value. This is expected
in monitor mode, where RX frames bypass the regular RX
descriptor path that typically sets rxcb->peer_id.
As a result, the peer is NULL, and link_id and link_valid fields
in the RX status are not populated. This leads to a WARN_ON in
mac80211 when it receives data frame from an associated station
with invalid link_id.
Fix this potential issue by using ppduinfo->peer_id, which holds
the correct peer id for the received frame. This ensures that the
peer is correctly found and the associated link metadata is updated
accordingly.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1 |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Igor Benic Pets pets allows Reflected XSS.This issue affects Pets: from n/a through <= 1.4.1. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: sof_sdw: Prevent jump to NULL add_sidecar callback
In create_sdw_dailink() check that sof_end->codec_info->add_sidecar
is not NULL before calling it.
The original code assumed that if include_sidecar is true, the codec
on that link has an add_sidecar callback. But there could be other
codecs on the same link that do not have an add_sidecar callback. |
| NULL pointer dereference for some Intel(R) Graphics Drivers may allow an authenticated user to potentially enable denial of service via local access. |
| The authentication system of Securepoint UTM mishandles OTP keys. This allows the bypassing of second-factor verification (when OTP is enabled) in both the administration web interface and the user portal. Affected versions include UTM 11.5 through 12.6.4 and Reseller Preview 12.7.0. The issue has been fixed in UTM 12.6.5 and 12.7.1. |
| Applications serving static resources through the functional web frameworks WebMvc.fn or WebFlux.fn are vulnerable to path traversal attacks. An attacker can craft malicious HTTP requests and obtain any file on the file system that is also accessible to the process in which the Spring application is running.
Specifically, an application is vulnerable when both of the following are true:
* the web application uses RouterFunctions to serve static resources
* resource handling is explicitly configured with a FileSystemResource location
However, malicious requests are blocked and rejected when any of the following is true:
* the Spring Security HTTP Firewall https://docs.spring.io/spring-security/reference/servlet/exploits/firewall.html is in use
* the application runs on Tomcat or Jetty |
| EDK2 contains a vulnerability in the HashPeImageByType(). A user may cause a read out of bounds when a corrupted data pointer and length are sent via an adjecent network. A successful exploit of this vulnerability may lead to a loss of Integrity and/or Availability. |
| Cross-Site Request Forgery (CSRF) vulnerability in Internal Link Juicer Internal Link Juicer: SEO Auto Linker for WordPress.This issue affects Internal Link Juicer: SEO Auto Linker for WordPress: from n/a through 2.24.3. |
| HTMLSanitizer.jl is a Whitelist-based HTML sanitizer. Prior to version 0.2.1, when adding the style tag to the whitelist, content inside the tag is incorrectly unescaped, and closing tags injected as content are interpreted as real HTML, enabling tag injection and JavaScript execution. This could result in possible cross-site scripting (XSS) in any HTML that is sanitized with this library. This issue has been patched in version 0.2.1. A workaround involves adding the math and svg elements to the whitelist manually. |
| A potential buffer overflow vulnerability was reported in some Lenovo Notebook products that could allow a local attacker with elevated privileges to execute arbitrary code. |
| Spring Cloud Config Server may not use Vault token sent by clients using a X-CONFIG-TOKEN header when making requests to Vault.
Your application may be affected by this if the following are true:
* You have Spring Vault on the classpath of your Spring Cloud Config Server and
* You are using the X-CONFIG-TOKEN header to send a Vault token to the Spring Cloud Config Server for the Config Server to use when making requests to Vault and
* You are using the default Spring Vault SessionManager implementation LifecycleAwareSessionManager or a SessionManager implementation that persists the Vault token such as SimpleSessionManager.
In this case the SessionManager persists the first token it retrieves and will continue to use that token even if client requests to the Spring Cloud Config Server include a X-CONFIG-TOKEN header with a different value.
Affected Spring Products and Versions
Spring Cloud Config:
* 2.2.1.RELEASE - 4.2.1
Mitigation
Users of affected versions should upgrade to the corresponding fixed version.
Affected version(s)Fix versionAvailability4.2.x4.2.2OSS4.1.x4.1.6OSS4.0.x4.0.10Commercial3.1.x3.1.10Commercial3.0.x4.1.6OSS2.2.x4.1.6OSS
NOTE: Spring Cloud Config 3.0.x and 2.2.x are no longer under open source or commercial support. Users of these versions are encouraged to upgrade to a supported version.
No other mitigation steps are necessary. |
| Strawberry GraphQL is a library for creating GraphQL APIs. Starting in 0.182.0 and prior to version 0.257.0, a type confusion vulnerability exists in Strawberry GraphQL's relay integration that affects multiple ORM integrations (Django, SQLAlchemy, Pydantic). The vulnerability occurs when multiple GraphQL types are mapped to the same underlying model while using the relay node interface. When querying for a specific type using the global node field (e.g., FruitType:some-id), the resolver may incorrectly return an instance of a different type mapped to the same model (e.g., SpecialFruitType). This can lead to information disclosure if the alternate type exposes sensitive fields and potential privilege escalation if the alternate type contains data intended for restricted access. This vulnerability is fixed in 0.257.0. |
