| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was determined in TaleLin Lin-CMS up to 0.6.0. This affects an unknown part of the file /tests/config.py of the component Tests Folder. This manipulation of the argument username/password causes password in configuration file. The attack is possible to be carried out remotely. The complexity of an attack is rather high. It is indicated that the exploitability is difficult. The exploit has been publicly disclosed and may be utilized. |
| Encryption is missing on the configuration interface for Growatt ShineLan-X and MIC 3300TL-X. This allows an attacker with access to the network to intercept and potentially manipulate communication requests between the inverter and its cloud endpoint. |
| An issue was discovered in AlertEnterprise Guardian 4.1.14.2.2.1. One can bypass manager approval via isAddedByApprover in a Request%20Building%20Access requestSubmit API call. The vendor has stated that the system is protected by updating to a version equal to or greater than one of the following build numbers: 4.1.12.2.1.19, 4.1.12.5.2.36, 4.1.13.0.60, 4.1.13.2.0.3.39, 4.1.13.2.0.3.41, 4.1.13.2.42, 4.1.13.2.25.44, 4.1.14.0.13, 4.1.14.0.43, 4.1.14.0.48, and 4.1.14.1.5.32. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in mithra62 WP-Click-Tracker wp-click-track allows Reflected XSS.This issue affects WP-Click-Tracker: from n/a through <= 0.7.3. |
| An issue was discovered in AlertEnterprise Guardian 4.1.14.2.2.1. One can elevate to administrator privileges via the IsAdminApprover parameter in a Request%20Building%20Access requestSubmit API call. The vendor has stated that the system is protected by updating to a version equal to or greater than one of the following build numbers: 4.1.12.2.1.19, 4.1.12.5.2.36, 4.1.13.0.60, 4.1.13.2.0.3.39, 4.1.13.2.0.3.41, 4.1.13.2.42, 4.1.13.2.25.44, 4.1.14.0.13, 4.1.14.0.43, 4.1.14.0.48, and 4.1.14.1.5.32. |
| Cross Site Request Forgery (CSRF) vulnerability in Smartvista BackOffice SmartVista Suite 2.2.22 via crafted GET request. |
| The authentication mechanism on web interface is not properly implemented. It is possible to bypass authentication checks by crafting a post request with new settings since there is no session token or authentication in place. This would allow an attacker for instance to point the device to an arbitrary address for domain name resolution to e.g. facililitate a man-in-the-middle (MitM) attack. |
| Keyfactor Remote File Orchestrator (aka remote-file-orchestrator) 2.8 before 2.8.1 allows Information Disclosure: sensitive information could be exposed at the debug logging level. |
| A vulnerability classified as problematic has been found in caipeichao ThinkOX 1.0. This affects an unknown part of the file /ThinkOX-master/index.php?s=/Weibo/Index/search.html of the component Search. The manipulation of the argument keywords leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Pascal Casier bbPress Move Topics bbp-move-topics allows Reflected XSS.This issue affects bbPress Move Topics: from n/a through <= 1.1.6. |
| A flaw has been found in omec-project UPF up to 2.1.3-dev. This affects the function handleSessionEstablishmentRequest of the file /pfcpiface/pfcpiface/messages_session.go of the component PFCP Session Establishment Request Handler. This manipulation causes null pointer dereference. The attack may be initiated remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in useStrict bbPress Notify bbpress-notify-nospam allows Reflected XSS.This issue affects bbPress Notify: from n/a through <= 2.19.5. |
| A heap buffer overflow vulnerability in the loading of ExecuTorch models can potentially result in code execution or other undesirable effects. This issue affects ExecuTorch prior to commit ede82493dae6d2d43f8c424e7be4721abe5242be |
| Out-of-bounds array write in Xpdf 4.05 and earlier, triggered by an invalid VerticesPerRow value in a PDF shading dictionary. |
| ERC (aka Emotion Recognition in Conversation) through 0.3 has insecure deserialization via a serialized object because jsonpickle is used. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: core: Prevent integer underflow
By using a ratio of delay to poll_enabled_time that is not integer
time_remaining underflows and does not exit the loop as expected.
As delay could be derived from DT and poll_enabled_time is defined
in the driver this can easily happen.
Use a signed iterator to make sure that the loop exits once
the remaining time is negative. |
| The Kademlia DHT (go-libp2p-kad-dht 0.20.0 and earlier) used in IPFS (0.18.1 and earlier) assigns routing information for content (i.e., information about who holds the content) to be stored by peers whose peer IDs have a small DHT distance from the content ID. This allows an attacker to censor content by generating many Sybil peers whose peer IDs have a small distance from the content ID, thus hijacking the content resolution process. |
| A security issue was discovered in azure-file-csi-driver where an actor with access to the driver logs could observe service account tokens. These tokens could then potentially be exchanged with external cloud providers to access secrets stored in cloud vault solutions. Tokens are only logged when TokenRequests is configured in the CSIDriver object and the driver is set to run at log level 2 or greater via the -v flag. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mscc: ocelot: Fix use-after-free caused by cyclic delayed work
The origin code calls cancel_delayed_work() in ocelot_stats_deinit()
to cancel the cyclic delayed work item ocelot->stats_work. However,
cancel_delayed_work() may fail to cancel the work item if it is already
executing. While destroy_workqueue() does wait for all pending work items
in the work queue to complete before destroying the work queue, it cannot
prevent the delayed work item from being rescheduled within the
ocelot_check_stats_work() function. This limitation exists because the
delayed work item is only enqueued into the work queue after its timer
expires. Before the timer expiration, destroy_workqueue() has no visibility
of this pending work item. Once the work queue appears empty,
destroy_workqueue() proceeds with destruction. When the timer eventually
expires, the delayed work item gets queued again, leading to the following
warning:
workqueue: cannot queue ocelot_check_stats_work on wq ocelot-switch-stats
WARNING: CPU: 2 PID: 0 at kernel/workqueue.c:2255 __queue_work+0x875/0xaf0
...
RIP: 0010:__queue_work+0x875/0xaf0
...
RSP: 0018:ffff88806d108b10 EFLAGS: 00010086
RAX: 0000000000000000 RBX: 0000000000000101 RCX: 0000000000000027
RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffff88806d123e88
RBP: ffffffff813c3170 R08: 0000000000000000 R09: ffffed100da247d2
R10: ffffed100da247d1 R11: ffff88806d123e8b R12: ffff88800c00f000
R13: ffff88800d7285c0 R14: ffff88806d0a5580 R15: ffff88800d7285a0
FS: 0000000000000000(0000) GS:ffff8880e5725000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe18e45ea10 CR3: 0000000005e6c000 CR4: 00000000000006f0
Call Trace:
<IRQ>
? kasan_report+0xc6/0xf0
? __pfx_delayed_work_timer_fn+0x10/0x10
? __pfx_delayed_work_timer_fn+0x10/0x10
call_timer_fn+0x25/0x1c0
__run_timer_base.part.0+0x3be/0x8c0
? __pfx_delayed_work_timer_fn+0x10/0x10
? rcu_sched_clock_irq+0xb06/0x27d0
? __pfx___run_timer_base.part.0+0x10/0x10
? try_to_wake_up+0xb15/0x1960
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
tmigr_handle_remote_up+0x603/0x7e0
? __pfx_tmigr_handle_remote_up+0x10/0x10
? sched_balance_trigger+0x1c0/0x9f0
? sched_tick+0x221/0x5a0
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
? tick_nohz_handler+0x339/0x440
? __pfx_tmigr_handle_remote_up+0x10/0x10
__walk_groups.isra.0+0x42/0x150
tmigr_handle_remote+0x1f4/0x2e0
? __pfx_tmigr_handle_remote+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
? hrtimer_interrupt+0x322/0x780
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
The following diagram reveals the cause of the above warning:
CPU 0 (remove) | CPU 1 (delayed work callback)
mscc_ocelot_remove() |
ocelot_deinit() | ocelot_check_stats_work()
ocelot_stats_deinit() |
cancel_delayed_work()| ...
| queue_delayed_work()
destroy_workqueue() | (wait a time)
| __queue_work() //UAF
The above scenario actually constitutes a UAF vulnerability.
The ocelot_stats_deinit() is only invoked when initialization
failure or resource destruction, so we must ensure that any
delayed work items cannot be rescheduled.
Replace cancel_delayed_work() with disable_delayed_work_sync()
to guarantee proper cancellation of the delayed work item and
ensure completion of any currently executing work before the
workqueue is deallocated.
A deadlock concern was considered: ocelot_stats_deinit() is called
in a process context and is not holding any locks that the delayed
work item might also need. Therefore, the use of the _sync() variant
is safe here.
This bug was identified through static analysis. To reproduce the
issue and validate the fix, I simulated ocelot-swit
---truncated--- |
| An improper file signature check in Palo Alto Networks Cortex XDR agent may allow an attacker to bypass the Cortex XDR agent's executable blocking capabilities and run untrusted executables on the device. This issue can be leveraged to execute untrusted software without being detected or blocked. |
