| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| wb2osz/direwolf (Dire Wolf) versions up to and including 1.8, prior to commit 3658a87, contain a reachable assertion vulnerability in the APRS MIC-E decoder function aprs_mic_e() located in src/decode_aprs.c. When processing a specially crafted AX.25 frame containing a MIC-E message with an empty or truncated comment field, the application triggers an unhandled assertion checking for a non-empty comment. This assertion failure causes immediate process termination, allowing a remote, unauthenticated attacker to cause a denial of service by sending malformed APRS traffic. |
| wb2osz/direwolf (Dire Wolf) versions up to and including 1.8, prior to commit 694c954, contain a stack-based buffer overflow vulnerability in the function kiss_rec_byte() located in src/kiss_frame.c. When processing crafted KISS frames that reach the maximum allowed frame length (MAX_KISS_LEN), the function appends a terminating FEND byte without reserving sufficient space in the stack buffer. This results in an out-of-bounds write followed by an out-of-bounds read during the subsequent call to kiss_unwrap(), leading to stack memory corruption or application crashes. This vulnerability may allow remote unauthenticated attackers to trigger a denial-of-service condition. |
| In the Linux kernel, the following vulnerability has been resolved:
uio: uio_dmem_genirq: Fix missing unlock in irq configuration
Commit b74351287d4b ("uio: fix a sleep-in-atomic-context bug in
uio_dmem_genirq_irqcontrol()") started calling disable_irq() without
holding the spinlock because it can sleep. However, that fix introduced
another bug: if interrupt is already disabled and a new disable request
comes in, then the spinlock is not unlocked:
root@localhost:~# printf '\x00\x00\x00\x00' > /dev/uio0
root@localhost:~# printf '\x00\x00\x00\x00' > /dev/uio0
root@localhost:~# [ 14.851538] BUG: scheduling while atomic: bash/223/0x00000002
[ 14.851991] Modules linked in: uio_dmem_genirq uio myfpga(OE) bochs drm_vram_helper drm_ttm_helper ttm drm_kms_helper drm snd_pcm ppdev joydev psmouse snd_timer snd e1000fb_sys_fops syscopyarea parport sysfillrect soundcore sysimgblt input_leds pcspkr i2c_piix4 serio_raw floppy evbug qemu_fw_cfg mac_hid pata_acpi ip_tables x_tables autofs4 [last unloaded: parport_pc]
[ 14.854206] CPU: 0 PID: 223 Comm: bash Tainted: G OE 6.0.0-rc7 #21
[ 14.854786] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
[ 14.855664] Call Trace:
[ 14.855861] <TASK>
[ 14.856025] dump_stack_lvl+0x4d/0x67
[ 14.856325] dump_stack+0x14/0x1a
[ 14.856583] __schedule_bug.cold+0x4b/0x5c
[ 14.856915] __schedule+0xe81/0x13d0
[ 14.857199] ? idr_find+0x13/0x20
[ 14.857456] ? get_work_pool+0x2d/0x50
[ 14.857756] ? __flush_work+0x233/0x280
[ 14.858068] ? __schedule+0xa95/0x13d0
[ 14.858307] ? idr_find+0x13/0x20
[ 14.858519] ? get_work_pool+0x2d/0x50
[ 14.858798] schedule+0x6c/0x100
[ 14.859009] schedule_hrtimeout_range_clock+0xff/0x110
[ 14.859335] ? tty_write_room+0x1f/0x30
[ 14.859598] ? n_tty_poll+0x1ec/0x220
[ 14.859830] ? tty_ldisc_deref+0x1a/0x20
[ 14.860090] schedule_hrtimeout_range+0x17/0x20
[ 14.860373] do_select+0x596/0x840
[ 14.860627] ? __kernel_text_address+0x16/0x50
[ 14.860954] ? poll_freewait+0xb0/0xb0
[ 14.861235] ? poll_freewait+0xb0/0xb0
[ 14.861517] ? rpm_resume+0x49d/0x780
[ 14.861798] ? common_interrupt+0x59/0xa0
[ 14.862127] ? asm_common_interrupt+0x2b/0x40
[ 14.862511] ? __uart_start.isra.0+0x61/0x70
[ 14.862902] ? __check_object_size+0x61/0x280
[ 14.863255] core_sys_select+0x1c6/0x400
[ 14.863575] ? vfs_write+0x1c9/0x3d0
[ 14.863853] ? vfs_write+0x1c9/0x3d0
[ 14.864121] ? _copy_from_user+0x45/0x70
[ 14.864526] do_pselect.constprop.0+0xb3/0xf0
[ 14.864893] ? do_syscall_64+0x6d/0x90
[ 14.865228] ? do_syscall_64+0x6d/0x90
[ 14.865556] __x64_sys_pselect6+0x76/0xa0
[ 14.865906] do_syscall_64+0x60/0x90
[ 14.866214] ? syscall_exit_to_user_mode+0x2a/0x50
[ 14.866640] ? do_syscall_64+0x6d/0x90
[ 14.866972] ? do_syscall_64+0x6d/0x90
[ 14.867286] ? do_syscall_64+0x6d/0x90
[ 14.867626] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[...] stripped
[ 14.872959] </TASK>
('myfpga' is a simple 'uio_dmem_genirq' driver I wrote to test this)
The implementation of "uio_dmem_genirq" was based on "uio_pdrv_genirq" and
it is used in a similar manner to the "uio_pdrv_genirq" driver with respect
to interrupt configuration and handling. At the time "uio_dmem_genirq" was
introduced, both had the same implementation of the 'uio_info' handlers
irqcontrol() and handler(). Then commit 34cb27528398 ("UIO: Fix concurrency
issue"), which was only applied to "uio_pdrv_genirq", ended up making them
a little different. That commit, among other things, changed disable_irq()
to disable_irq_nosync() in the implementation of irqcontrol(). The
motivation there was to avoid a deadlock between irqcontrol() and
handler(), since it added a spinlock in the irq handler, and disable_irq()
waits for the completion of the irq handler.
By changing disable_irq() to disable_irq_nosync() in irqcontrol(), we also
avoid the sleeping-whil
---truncated--- |
| The jAlbum Bridge plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘ar’ parameter in all versions up to, and including, 2.0.16 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. It was determined that the patch in 2.0.16 was insufficient, and 2.0.17 is considered the fully patched version. |
| A use after free in the SEV firmware could allow a malicous hypervisor to activate a migrated guest with the SINGLE_SOCKET policy on a different socket than the migration agent potentially resulting in loss of integrity. |
| An insufficient entropy vulnerability was found in glibc. The getrandom and arc4random family of functions may return predictable randomness if these functions are called again after the fork, which happens concurrently with a call to any of these functions. |
| A vulnerability in the CLI of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, local attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition.
This vulnerability is due to a buffer overflow. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the CLI prompt. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. |
| The Wux Blog Editor plugin for WordPress is vulnerable to arbitrary file uploads due to insufficient file type validation in the 'wuxbt_insertImageNew' function in versions up to, and including, 3.0.0. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible. |
| A Use of Uninitialized Variable vulnerability exists in Open Design Alliance Drawings SDK static versions (mt) before 2026.12. Static object `COdaMfcAppApp theApp` may access `OdString::kEmpty` before its initialization. Due to undefined initialization order of static objects across translation units (Static Initialization Order Fiasco), the application accesses uninitialized memory. This results in application crash on startup, causing denial of service. Due to undefined behavior, memory corruption and potential arbitrary code execution cannot be ruled out in specific exploitation scenarios. |
| The Ultimate 410 Gone Status Code plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 410 entries in all versions up to, and including, 1.1.4 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| Incorrect Default Permissions vulnerability in Mitsubishi Electric Corporation FREQSHIP-mini for Windows versions 8.0.0 to 8.0.2 allows a local attacker to execute arbitrary code with system privileges by replacing service executable files (EXE) or DLLs in the installation directory with specially crafted files. As a result, the attacker may be able to disclose, tamper with, delete, or destroy information stored on the PC where the affected product is installed, or cause a Denial of Service (DoS) condition on the affected system. |
| Unchecked output buffer may allowed arbitrary code execution in SMM and potentially result in SMM memory corruption. |
| The RapidLoad – Optimize Web Vitals Automatically plugin for WordPress is vulnerable to unauthorized access of data and modification of data due to a missing capability check on the uucss_data, update_rapidload_settings, wp_ajax_update_htaccess_file, uucss_update_rule, upload_rules, get_all_rules, update_titan_settings, preload_page, and activate_module functions in all versions up to, and including, 2.4.2. This makes it possible for authenticated attackers, with Subscriber-level access and above, to modify plugin settings or conduct SQL injection attacks. |
| Improper input validation in SMU may allow an attacker with privileges and a compromised physical function (PF) to modify the PCIe® lane count and speed, potentially leading to a loss of availability. |
| Uploadify WordPress plugin versions up to and including 1.0 contain an arbitrary file upload vulnerability in process_upload.php due to missing file type validation. An unauthenticated remote attacker can upload arbitrary files to the affected WordPress site, which may allow remote code execution by uploading executable content to a web-accessible location. |
| The ProductDyno plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the ‘res’ parameter in all versions up to, and including, 1.0.24 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts into pages that execute if they can successfully trick a user into performing an action such as clicking on a link. This vulnerability is potentially a duplicate of CVE-2025-22320. |
| Using API in the 2N OS device, authorized user can enable logging, which discloses valid authentication tokens in system log.
2N has released an updated version 2.46 of 2N OS, where this vulnerability is mitigated. It is recommended that all customers update their devices to the latest 2N OS. |
| Specifically crafted payloads sent to the RFID reader could cause DoS of RFID reader. After the device is restarted, it gets back to fully working state.
2N has released an updated version 2.46 of 2N OS, where this vulnerability is mitigated. It is recommended that all customers update their devices to the latest 2N OS. |
| The Mac App Store distribution of the Canva for Mac desktop app before 1.117.1 was built without Hardened Runtime. A local threat actor with unprivileged access could execute arbitrary code that inherits the TCC (Transparency, Consent, and Control) permissions assigned to Canva. |
| The Construction Light WordPress theme before 1.6.8 does not have authorisation and CSRF when activating via an AJAX action, allowing any authenticated users, such as subscriber to activate arbitrary . |
