| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Label Studio is an open source data labeling tool. A path traversal vulnerability in Label Studio SDK versions prior to 1.0.10 allows unauthorized file access outside the intended directory structure. The flaw exists in the VOC, COCO and YOLO export functionalities. These functions invoke a `download` function on the `label-studio-sdk` python package, which fails to validate file paths when processing image references during task exports. By creating tasks with path traversal sequences in the image field, an attacker can force the application to read files from arbitrary server filesystem locations when exporting projects in any of the mentioned formats. This is authentication-required vulnerability allowing arbitrary file reads from the server filesystem. It may lead to potential exposure of sensitive information like configuration files, credentials, and confidential data. Label Studio versions before 1.16.0 specified SDK versions prior to 1.0.10 as dependencies, and the issue was confirmed in Label Studio version 1.13.2.dev0; therefore, Label Studio users should upgrade to 1.16.0 or newer to mitigate it. |
| Cross Site Scripting (XSS) vulnerability in ASUS RT-AC51U with firmware versions up to and including 3.0.0.4.380.8591 allows attackers to run arbitrary code via the WPA Pre-Shared Key field. |
| The Smush plugin for WordPress is vulnerable to unauthorized deletion of the resmush list due to a missing capability check on the delete_resmush_list() function. This makes it possible for authenticated attackers, with minimal permissions such as a subscriber, to delete the resmush list for Nextgen or the Media Library. |
| Improper Neutralization of Input During Web Page Generation Cross-site Scripting vulnerability in Jalios JPlatform 10 allows for Reflected XSS and Stored XSS.This issue affects JPlatform 10: before 10.0.8 (SP8), before 10.0.7 (SP7), before 10.0.6 (SP6) and Jalios Workplace 6.2, Jalios Workplace 6.1, Jalios Workplace 6.0, and Jalios Workplace 5.3 to 5.5 |
| A vulnerability has been identified in SIMATIC Energy Manager Basic (All versions < V7.5), SIMATIC Energy Manager PRO (All versions < V7.5), SIMATIC IPC DiagBase (All versions), SIMATIC IPC DiagMonitor (All versions), SIMIT V10 (All versions), SIMIT V11 (All versions < V11.1). Unified Automation .NET based OPC UA Server SDK before 3.2.2 used in Siemens products are affected by a similar vulnerability as documented in CVE-2023-27321 for the OPC Foundation UA .NET Standard implementation. A successful attack may lead to high load situation and memory exhaustion, and may block the server. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Payara Platform Payara Server (Logging modules) allows Sensitive credentials posted in plain-text on the server log.This issue affects Payara Server: from 6.0.0 before 6.18.0, from 6.2022.1 before 6.2024.9, from 5.20.0 before 5.67.0, from 5.2020.2 before 5.2022.5, from 4.1.2.191.0 before 4.1.2.191.50. |
| Netdata is an open source observability tool. In affected versions the `ndsudo` tool shipped with affected versions of the Netdata Agent allows an attacker to run arbitrary programs with root permissions. The `ndsudo` tool is packaged as a `root`-owned executable with the SUID bit set. It only runs a restricted set of external commands, but its search paths are supplied by the `PATH` environment variable. This allows an attacker to control where `ndsudo` looks for these commands, which may be a path the attacker has write access to. This may lead to local privilege escalation. This vulnerability has been addressed in versions 1.45.3 and 1.45.2-169. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| A vulnerability was found in LiveHelperChat lhc-php-resque Extension up to ee1270b35625f552425e32a6a3061cd54b5085c4. It has been classified as problematic. This affects an unknown part of the file /site_admin/lhcphpresque/list/ of the component List Handler. The manipulation of the argument queue name leads to cross site scripting. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The identifier of the patch is 542aa8449b5aa889b3a54f419e794afe19f56d5d/0ce7b4f1193c0ed6c6e31a960fafededf979eef2. It is recommended to apply a patch to fix this issue. |
| CWE-20: Improper Input Validation vulnerability exists that could cause Denial of Service when an
authenticated malicious user sends HTTPS request containing invalid data type to the webserver. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
Prevent USB runtime PM (autosuspend) for AX88772* in bind.
usbnet enables runtime PM (autosuspend) by default, so disabling it via
the usb_driver flag is ineffective. On AX88772B, autosuspend shows no
measurable power saving with current driver (no link partner, admin
up/down). The ~0.453 W -> ~0.248 W drop on v6.1 comes from phylib powering
the PHY off on admin-down, not from USB autosuspend.
The real hazard is that with runtime PM enabled, ndo_open() (under RTNL)
may synchronously trigger autoresume (usb_autopm_get_interface()) into
asix_resume() while the USB PM lock is held. Resume paths then invoke
phylink/phylib and MDIO, which also expect RTNL, leading to possible
deadlocks or PM lock vs MDIO wake issues.
To avoid this, keep the device runtime-PM active by taking a usage
reference in ax88772_bind() and dropping it in unbind(). A non-zero PM
usage count blocks runtime suspend regardless of userspace policy
(.../power/control - pm_runtime_allow/forbid), making this approach
robust against sysfs overrides.
Holding a runtime-PM usage ref does not affect system-wide suspend;
system sleep/resume callbacks continue to run as before. |
| In Search Guard FLX versions 3.1.2 and earlier, while Document-Level Security (DLS) is correctly enforced elsewhere, when the search is triggered from a Signals watch, the DLS rule is not enforced, allowing access to all documents in the queried indices. |
| An XSS issue was discovered in Afterlogic Aurora webmail version 9.8.3 and below. An attacker can send a specially crafted HTML e-mail message with JavaScript in an img HTML tag. This could allow a remote attacker to load arbitrary JavaScript code in the context of a webmail user's browser window, and access user data. |
| In the Linux kernel, the following vulnerability has been resolved:
hwrng: ks-sa - fix division by zero in ks_sa_rng_init
Fix division by zero in ks_sa_rng_init caused by missing clock
pointer initialization. The clk_get_rate() call is performed on
an uninitialized clk pointer, resulting in division by zero when
calculating delay values.
Add clock initialization code before using the clock.
drivers/char/hw_random/ks-sa-rng.c | 7 +++++++
1 file changed, 7 insertions(+) |
| Improper resource release in the call termination process in AWS Wickr before version 6.62.13 on Windows, macOS and Linux may allow a call participant to continue receiving audio input from another user after they close their call window. This issue occurs under certain conditions, which require the affected user to take a particular action within the application
To mitigate this issue, users should upgrade AWS Wickr, Wickr Gov and Wickr Enterprise desktop version to version 6.62.13. |
| This vulnerability allows an attacker to access parts of the application that are not protected by any type of access control. The attacker could access this path ‘…/epsilonnet/License/About.aspx’ and obtain information on both the licence and the configuration of the product by knowing which modules are installed. |
| In the Linux kernel, the following vulnerability has been resolved:
PM / devfreq: mtk-cci: Fix potential error pointer dereference in probe()
The drv->sram_reg pointer could be set to ERR_PTR(-EPROBE_DEFER) which
would lead to a error pointer dereference. Use IS_ERR_OR_NULL() to check
that the pointer is valid. |
| An unauthenticated SQL Injection was discovered within the Geutebruck G-Cam E-Series Cameras through the `Group` parameter in the `/uapi-cgi/viewer/Param.cgi` script. This has been confirmed on the EFD-2130 camera running firmware version 1.12.0.19. |
| A vulnerability was found in Huashi Private Cloud CDN Live Streaming Acceleration Server up to 20240520. It has been classified as critical. Affected is an unknown function of the file /manager/ipconfig_new.php. The manipulation of the argument dev leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-265992. |
| Bematech (formerly Logic Controls, now Elgin) MP-4200 TH printer contains a denial of service vulnerability in the admin configuration page. Remote attackers can send crafted POST requests with malformed 'admin' and 'person' parameters to crash the printer's web service, causing a denial of service condition. |
| An XML External Entity (XXE) injection vulnerability in the component /datagrip/upload of Chat2DB v0.3.5 allows attackers to execute arbitrary code via supplying a crafted XML input. |
