Search vulnerabilities

Results 425,120

CVE-2026-8363

Gladinet Triofox Stack-based Buffer Overflow in WOSDeviceDropFolder.dll

A stack-based buffer overflow condition exists in WOSDeviceDropFolder.dll when processing a long URL path starting with /resources:

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-8361

Gladinet Triofox Path Traversal in WOSDefaultHttpModule.dll

A path traversal vulnerability exists in WOSDefaultHttpModule.dll when processing a URL path starting with /woshome

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-8359

Gladinet Triofox WOSHttpStatusModule.dll NULL Function Pointer Call DoS

When processing a request with a URL path starting with /status or /sysinfo, WOSHttpStatusModule.dll is to be loaded to handle such URL patterns. The WOSBin_LoadHttpModule function in the dll would be called to set up a "module" object for that module. However, WOSHttpStatusModule.dll is not present in the installation. As a result, a function pointer to WOSBin_LoadHttpModule (which would have been in the export table in WOSHttpStatusModule.dll) is set to NULL, resulting in calling a function at address 0.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-68708

PIN Bypass via Overlay in SailingLab AppLock

SailingLab AppLock (aka com.alpha.applock) 4.3.8 for Android allows a local attacker with physical access to bypass the PIN lock. The lock is implemented as an overlay rather than by using Android's secure authentication APIs. By navigating cascading interface flows - insecure navigation through exposed routes facilitates app control evasion {I.N.T.E.R.F.A.C.E] via advertisement or browser intents - an attacker can evade lockscreen verification and access protected apps (e.g., Chrome). This results in information disclosure and privilege escalation.

CVSS 3.1 · 2.4 Low EPSS < 1% KEV · Not listed
Vendors
CVE-2025-68710

Local PIN Bypass via Overlay Manipulation in Easyelife App Lock

Easyelife App lock (aka Fingerprint,Applock or locker.app.safe.applocker) 1.9.2 for Android allows a local attacker with physical access to bypass the PIN lock. The lock is implemented as an overlay rather than by using Android's secure authentication APIs. By navigating cascading interface flows - insecure navigation through exposed routes facilitates app control evasion {I.N.T.E.R.F.A.C.E] via advertisement or browser intents - an attacker can evade lockscreen verification and access protected apps (e.g., Chrome), resulting in information disclosure and privilege escalation.

CVSS 3.1 · 2.4 Low EPSS < 1% KEV · Not listed
Vendors
CVE-2025-68711

AppLockZ PIN Lock Bypass via Intent Navigation

AppLockZ App Lock and Fingerprint Lock (applock.passwordfingerprint.applockz) 4.2.11 for Android allows a local attacker with physical access to bypass the PIN lock. The lock is implemented as an overlay rather than by using Android's secure authentication APIs. By navigating cascading interface flows - insecure navigation through exposed routes facilitates app control evasion {I.N.T.E.R.F.A.C.E] via advertisement or browser intents, an attacker can evade lockscreen verification and access protected apps (e.g., Chrome). This results in information disclosure and privilege escalation.

CVSS 3.1 · 2.4 Low EPSS < 1% KEV · Not listed
Vendors
CVE-2026-36239

Code Injection Vulnerability in PbootCMS Site Configuration

PbootCMS v.3.2.11 contains a code injection vulnerability in its site configuration functionality

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2015-2808

SSL/TLS: "Invariance Weakness" vulnerability in RC4 stream cipher

The RC4 algorithm, as used in the TLS protocol and SSL protocol, does not properly combine state data with key data during the initialization phase, which makes it easier for remote attackers to conduct plaintext-recovery attacks against the initial bytes of a stream by sniffing network traffic that occasionally relies on keys affected by the Invariance Weakness, and then using a brute-force approach involving LSB values, aka the "Bar Mitzvah" issue.

CVSS 3.1 · 3.7 Low EPSS 73.9% KEV · Not listed
Vendors
Canonical Debian Fujitsu and 6 more
CVE-2026-48691

Integer Overflow in FastNetMon BGP AS_PATH Encoder Causes Heap Buffer Overflow

FastNetMon Community Edition through 1.2.9 contains an integer overflow in the BGP AS_PATH attribute encoder. In src/bgp_protocol.hpp, the IPv4UnicastAnnounce::get_attributes() function computes attribute_length as 'sizeof(bgp_as_path_segment_element_t) + this->as_path_asns.size() * sizeof(uint32_t)' and stores it in a uint8_t field (line 600-605). Since uint8_t can only hold values 0-255, an AS_PATH containing more than 63 ASNs (2 + 64*4 = 258 > 255) causes silent truncation. The truncated length is used for buffer sizing, while the actual data written is the full untruncated amount, resulting in a heap buffer overflow. Similarly, the path_segment_length field at line 621 is also uint8_t, truncating with more than 255 ASNs.

CVSS 3.1 · 7.3 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-68709

Android AppLock JavaScript Injection Enabling Local Code Execution

SailingLab AppLock (aka com.alpha.applock) 4.3.8 for Android allows a local attacker to trigger arbitrary JavaScript execution via BrowserMainActivity, which accepts VIEW intents with javascript: URIs. This unsafe navigation path results in script execution and may allow UI spoofing or privilege escalation.

CVSS 3.1 · 5.2 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-45879

power: supply: bq25980: Fix use-after-free in power_supply_changed()

In the Linux kernel, the following vulnerability has been resolved: power: supply: bq25980: Fix use-after-free in power_supply_changed() Using the `devm_` variant for requesting IRQ _before_ the `devm_` variant for allocating/registering the `power_supply` handle, means that the `power_supply` handle will be deallocated/unregistered _before_ the interrupt handler (since `devm_` naturally deallocates in reverse allocation order). This means that during removal, there is a race condition where an interrupt can fire just _after_ the `power_supply` handle has been freed, *but* just _before_ the corresponding unregistration of the IRQ handler has run. This will lead to the IRQ handler calling `power_supply_changed()` with a freed `power_supply` handle. Which usually crashes the system or otherwise silently corrupts the memory... Note that there is a similar situation which can also happen during `probe()`; the possibility of an interrupt firing _before_ registering the `power_supply` handle. This would then lead to the nasty situation of using the `power_supply` handle *uninitialized* in `power_supply_changed()`. Fix this racy use-after-free by making sure the IRQ is requested _after_ the registration of the `power_supply` handle.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-49103

Unsafely Constructed Filename in Webmin Mailbox Attachment Saving Leads to Remote Code Execution

Webmin before 2.640 does not safely construct a filename for saving of an attachment within the mailboxes component. This occurs in mailboxes/detachall.cgi.

CVSS 4.0 · 9.4 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-48694

FastNetMon Juniper NETCONF Configuration Injection

FastNetMon Community Edition through 1.2.9 contains a configuration injection vulnerability in the Juniper router integration plugin. In src/juniper_plugin/fastnetmon_juniper.php, the $IP_ATTACK variable (received from argv[1]) is directly interpolated into Juniper NETCONF set-configuration commands at lines 69 and 90 without any validation or sanitization. Line 69: $conn->load_set_configuration("set routing-options static route {$IP_ATTACK} community 65535:666 discard"). Line 90: $conn->load_set_configuration("delete routing-options static route {$IP_ATTACK}/32"). An attacker who can control the IP address string can inject additional Juniper CLI configuration commands by embedding newline characters followed by arbitrary set/delete commands. This could modify the router's routing table, firewall filters, user accounts, or any other configuration element accessible via NETCONF. The impact is full router compromise.

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-8450

HTTP::Daemon versions before 6.17 for Perl allow OS command injection via send_file()

HTTP::Daemon versions before 6.17 for Perl allow OS command injection via send_file(). send_file() opens its string argument with Perl's 2-arg open(). The 2-arg form interprets magic prefixes: '| cmd' and 'cmd |' open a pipe to a subprocess, '> path' and '>> path' open the path for write or append. Untrusted input passed to send_file() can run OS commands at the daemon process UID. The read-pipe form ('cmd |') also leaks subprocess stdout into the HTTP response body. The write-mode forms can create or truncate files at attacker chosen paths.

CVSS 3.1 · 9.1 Critical EPSS 1.4% KEV · Not listed
Vendors
Products
CVE-2026-1402

Allocation of Resources Without Limits or Throttling in GitLab

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 17.1 before 18.10.7, 18.11 before 18.11.4, and 19.0 before 19.0.1 that under certain conditions could have allowed an authenticated user to cause denial of service due to insufficient validation.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-2601

Missing Authorization in GitLab

GitLab has remediated an issue in GitLab EE affecting all versions from 11.5 before 18.10.7, 18.11 before 18.11.4, and 19.0 before 19.0.1 that under certain conditions could have allowed an authenticated user with developer-role permissions to access sensitive deployment data on projects due to improper authorization checks.

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-42782

Apache Syncope: Post-auth RCE via Groovy static

Improper Isolation or Compartmentalization vulnerability in Apache Syncope. An administrator with adequate entitlements for Implementations can create a malicious Groovy class containing untrusted code reaching a non-sandboxed execution path via the class static initializer. This issue affects Apache Syncope: 3.0 through 3.0.16, 4.0 through 4.0.5, 4.1.0. Users are recommended to upgrade to version 4.0.6 / 4.1.1, which fix this issue by forcing even the static initializer in Groovy code to run in a sandbox.

CVSS 3.1 · 7.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-4868

Authorization Bypass Through User-Controlled Key in GitLab

GitLab has remediated an issue in GitLab EE affecting all versions from 18.8 before 18.10.7, 18.11 before 18.11.4, and 19.0 before 19.0.1 that, under certain conditions, could have allowed an authenticated user to cause specific Duo AI workflows to run under another user's identity due to improper user identity resolution when triggering Duo AI workflow runners.

CVSS 3.1 · 8.2 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-5296

Missing Authorization in GitLab

GitLab has remediated an issue in GitLab EE affecting all versions from 18.7 before 18.10.7, 18.11 before 18.11.4, and 19.0 before 19.0.1 that when foundational flows were enabled at the group level, could have allowed an authenticated user with developer-role permissions to bypass flow restrictions under certain conditions.

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-6713

Incorrect Authorization in GitLab

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.2 before 18.10.7, 18.11 before 18.11.4, and 19.0 before 19.0.1 that under certain conditions could have allowed an unauthorized user to enumerate private projects due to incorrect authorization checks.

CVSS 3.1 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products