| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
binfmt_misc: don't let an 'F' entry pin its own instance
An entry registered with 'F' opens its interpreter at registration time
and holds that file until the entry is freed. Any entry nobody removes
by hand only gets closed once the binfmt_misc superblock is shut down.
If the interpreter lives on a mount that keeps that superblock alive the
two pin each other:
binfmt_misc sb -> inode -> entry -> interp_file -> vfsmount -> binfmt_misc sb
TL;DR the file is never closed. Once the mount namespace is gone there
is nothing left to unregister through either.
There are two ways to trigger this bug:
- Point the interpreter at the instance itself. Its files are regular
files owned by the mounter and both bm_get_inode() and
simple_fill_super() leave i_op at empty_iops. So notify_change() falls
back to simple_setattr() and chmod +x works. We never set SB_I_NOEXEC
and so open_exec() accepts it.
- Use the instance as an overlayfs lower layer. The overlay superblock
holds a clone_private_mount() of every layer until it is destroyed and
that clone is in no namespace. So umount_tree() never reaches it.
That's a DoS. And it isn't only the superblock that leaks. It pins the
user namespace it was mounted in, so every iteration permanently eats
one of the caller's user namespace charges.
So let's just do the sane thing. SB_I_NOEXEC makes open_exec() fail on
the instance's own files and s_stack_depth makes overlayfs reject the
layer before it ever takes a clone. That also covers the ecryptfs and
fuse passthrough variants. What 'F' promises is unchanged.
The stable tag is narrower than the Fixes tags on purpose. Before
sandboxed mounts this needed global root against the single instance
everyone shares, and the change doesn't apply to those trees anyway.
Note that SB_I_NODEV is implicitly raised for userns mounts but raise it
explicitly here as well. |
| In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: fix skb leak on flow key update failure during ct
ovs_ct_execute() always steals or frees the skb on failure while
ovs_flow_key_update() does not. So, if it fails and we return right
away, the skb ends up leaked.
Fix that by breaking instead and letting the common error handling
code at the bottom of the loop to free the skb properly.
This is a very unlikely scenario as it requires the packet to become
unparseable by applying a set of actions on a previously parseable skb,
but should be fixed nevertheless.
Reported by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
can: ems_usb: validate CPC message lengths
ems_usb_read_bulk_callback() walks CPC messages packed in one USB
receive buffer.
Check that each declared message fits in the URB payload. Also require the
type-specific payload to cover the fields used by the CAN, state, error and
overrun handlers. |
| In the Linux kernel, the following vulnerability has been resolved:
can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents
The wait and bulk receive paths walk variable-length commands from a
USB buffer. A nonzero command shorter than CMD_HEADER_LEN can still be
dispatched, and the wait path copies a matching command into a fixed
caller-owned struct kvaser_cmd using the device-provided length.
Reject nonzero commands that do not contain the fixed header or that
extend beyond the current USB buffer item. In the wait path, also reject
a matching command that exceeds the destination before copying it. |
| In the Linux kernel, the following vulnerability has been resolved:
can: peak_usb: add bounds check for USB channel index
The channel control index ctrl_idx is derived from rx->len which comes
directly from a device USB payload. The mask 0x0f allows values 0-15, but
the array size of usb_if->dev[] is only 2. Values 2-15 cause heap
out-of-bounds read, eventually causing kernel panic in the IRQ context.
Add bounds checking for ctrl_idx before the array access in both
pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error(). |
| In the Linux kernel, the following vulnerability has been resolved:
can: peak_usb: validate uCAN receive record lengths
pcan_usb_fd_decode_buf() walks uCAN records packed in one USB
receive buffer.
Require each record to contain the fixed header for its type, and verify
CAN payload bytes before copying them into the skb. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: reject DX_BIND_QUERY without a DX context
vmw_cmd_dx_bind_query() unconditionally dereferences
sw_context->dx_ctx_node->ctx. Userspace can trigger a NULL pointer
dereference from any render-node fd by submitting an execbuf with
dx_context_handle == SVGA3D_INVALID_ID and a SVGA_3D_CMD_DX_BIND_QUERY
opcode in the command stream: dx_ctx_node is left NULL and the kernel
oopses on the assignment. The same NULL is then re-read in
vmw_resources_reserve() via vmw_context_get_dx_query_mob().
All sibling DX handlers fail-close on a missing dx_ctx_node using
VMW_GET_CTX_NODE(). Use the same pattern here, returning -EINVAL up
front before any relocation state is published. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: avoid destroy_workqueue(NULL) on vkms init failure
Two paths through vmw_vkms_init() can leave vmw->crc_workq NULL while
still leaving the rest of the driver in a state that calls
vmw_vkms_cleanup() at module unload:
1. vmw_host_get_guestinfo(GUESTINFO_VBLANK, ...) failing or
returning an oversized buffer -- the common case on hosts
without a VBLANK guestinfo entry -- early-returned before the
workqueue allocation.
2. alloc_ordered_workqueue() returning NULL on memory pressure.
vmw_vkms_cleanup() then calls destroy_workqueue(NULL), which
dereferences wq->name and panics.
Fix the first case by removing the early return: vmw->vkms_enabled
is already false on the rpci-failure path so no work will ever be
queued, and allocating the workqueue unconditionally keeps the
control flow simple. Fix the second case by guarding the cleanup
with a NULL check, since alloc_ordered_workqueue() can still fail
under low memory. |
| In the Linux kernel, the following vulnerability has been resolved:
fbcon: fix NULL pointer dereference for a console without vc_data
fbcon_new_modelist() runs when a framebuffer's modelist changes. For each
console mapped to it with fb_display[i].mode set, it reads vc_cons[i].d and
passes the vc_num to fbcon_set_disp(). This assumes a console with a mode
set has a vc_data, but it can be NULL. fbcon_set_disp() sets
fb_display[i].mode before it checks vc_data, and fbcon_deinit() leaves the
mode set after the vc_data is freed. fbcon_new_modelist() then dereferences
the NULL vc_data.
Keep fb_display[i].mode set only while the console has a vc_data. Check
vc_data before setting the mode in fbcon_set_disp(), and clear the mode in
fbcon_deinit(). The existing mode check in fbcon_new_modelist() then skips
such consoles. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: fix memory leak in radeon_ring_restore() on lock failure
radeon_ring_restore() takes ownership of the data buffer allocated by
radeon_ring_backup(). The caller (radeon_gpu_reset()) only frees it in
the non-restore branch; in the restore branch it relies on
radeon_ring_restore() to free it.
If radeon_ring_lock() fails, the function returned early without calling
kvfree(data), leaking the ring backup buffer on every GPU reset that
fails at the lock stage. During repeated GPU resets this causes
cumulative kernel memory exhaustion.
Free data before returning the error. |
| In the Linux kernel, the following vulnerability has been resolved:
evm: terminate and bound the evm_xattrs read buffer
evm_read_xattrs() allocates size + 1 bytes, fills them from the list of
enabled xattrs, and then passes strlen(temp) to
simple_read_from_buffer(). When no configured xattrs are enabled, the
fill loop stores nothing and temp[0] remains uninitialized, so strlen()
reads beyond initialized memory.
Explicitly terminate the buffer after allocation, use snprintf() for
each formatted line, and pass the accumulated length, without risk of
truncation, to simple_read_from_buffer(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix devx subscribe-event unwind NULL dereference
MLX5_IB_METHOD_DEVX_SUBSCRIBE_EVENT() links event_sub into sub_list
before initializing the fields used by the shared error path.
If eventfd_ctx_fdget() then fails, the unwind path dereferences
event_sub->ev_file in uverbs_uobject_put() and calls
subscribe_event_xa_dealloc() with an unset xa_key_level1.
subscribe_event_xa_alloc() creates the XA entry exactly once for a given
key_level1, on the first occurrence of that key. The unwind path must
therefore call subscribe_event_xa_dealloc() exactly once for it as well.
Enforce that by adding devx_key_in_sub_list() and calling
subscribe_event_xa_dealloc() only when the last matching pending entry is
being cleaned up. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_bpf: prevent unbounded recursion in offload rollback
Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd().
Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the
bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace
calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then
swaps prog/oldprog and recursively calls itself to roll back. But
bpf_tc_accept=0 makes the rollback fail too, which triggers yet another
rollback frame with the same arguments, and so on until the stack is
exhausted.
bpf_tc_accept is just a convenient knob for the reproducer. Any driver
whose tc_setup_cb_replace() fails twice in a row can hit the same loop,
so this is not a netdevsim-only issue.
Two ways to fix it:
1) Have the rollback call tc_setup_cb_add() on oldprog instead of
re-entering cls_bpf_offload_cmd().
2) Mark the rollback frame with a flag and skip a second-level
rollback from inside it.
Go with (2). It is the smaller change and keeps the original behaviour:
the rollback still goes through tc_setup_cb_replace(), so the driver
gets one real chance to restore its state. If that attempt also fails,
we just return the original error instead of recursing.
[1]: https://lore.kernel.org/bpf/ce5a6005-3c5e-4696-9e05-eba9461dc860@std.uestc.edu.cn/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
dax/kmem: account for partial discontiguous resource upon removal
When dev_dax_kmem_probe() partially succeeds (at least one range is
mapped) but a subsequent range fails request_mem_region() or
add_memory_driver_managed(), the probe silently continues, ultimately
returning success, but with the corresponding range resource NULL'ed out.
dev_dax_kmem_remove() iterates over all dax_device ranges regardless of if
the underlying resource exists. When remove_memory() is called later, it
returns 0 because the memory was never added which causes
dev_dax_kmem_remove() to incorrectly assume the (nonexistent) resource can
be removed and attempts cleanup on a NULL pointer.
Fix this by skipping these ranges altogether, noting that these cases are
considered success, such that the cleanup is still reached when all
actually-added ranges are successfully removed. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: rebase copied fsdlm LVB pointers in locking_state
The locking_state debugfs iterator snapshots struct ocfs2_lock_res by
value under ocfs2_dlm_tracking_lock and later formats that copy in
ocfs2_dlm_seq_show(). That is fine for the inline fields, but the
userspace fsdlm stack stores the LVB through lksb_fsdlm.sb_lvbptr. Once
the iterator drops the tracking lock, a copied non-NULL sb_lvbptr still
points into the original lockres owner, so teardown can free that
container before the debugfs dump walks the raw LVB bytes.
Rebase the copied sb_lvbptr to the copied l_lksb before dumping the raw
LVB. The seq snapshot already carries the inline LVB storage reserved in
struct ocfs2_dlm_lksb, so the debugfs reader can dump the copied bytes
without borrowing the original lockres lifetime.
The buggy scenario involves two paths, with each column showing the order
within that path:
locking_state reader: lockres teardown:
1. ocfs2_dlm_seq_start()/next() 1. file release or another owner
copies struct ocfs2_lock_res teardown reaches
2. ocfs2_dlm_seq_show() formats ocfs2_lock_res_free()
the copied row 2. the lockres is removed from the
3. ocfs2_dlm_lvb() follows the tracking list
copied sb_lvbptr 3. the owner frees the original
lockres container
Validation reproduced this kernel report:
KASAN slab-use-after-free in ocfs2_dlm_seq_show+0x1bd/0x430
RIP: 0033:0x7f8ec4b1e29d
The buggy address belongs to the object at ffff88810a1e0800 which belongs
to the cache kmalloc-1k of size 1024
The buggy address is located 368 bytes inside of freed 1024-byte region
[ffff88810a1e0800, ffff88810a1e0c00)
Read of size 1
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
ocfs2_dlm_seq_show+0x1bd/0x430 (fs/ocfs2/dlmglue.c:3137)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
seq_read_iter+0x29d/0x790
seq_read+0x20a/0x280
find_held_lock+0x2b/0x80
rcu_read_unlock+0x18/0x70
full_proxy_read+0x9e/0xd0
vfs_read+0x12c/0x590
ksys_read+0xd2/0x170
do_user_addr_fault+0x65a/0x890
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
ocfs2_file_open+0x13e/0x300
do_dentry_open+0x233/0x7f0
vfs_open+0x5a/0x1b0
path_openat+0x66d/0x1540
do_file_open+0x186/0x2b0
do_sys_openat2+0xce/0x150
__x64_sys_openat+0xd0/0x140
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
ocfs2_file_release+0x138/0x260
__fput+0x1df/0x4b0
fput_close_sync+0xd2/0x170
__x64_sys_close+0x55/0x90
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: require a ref for locking_state debugfs open
debug_lockres_open() copies inode->i_private into struct debug_lockres and
debug_lockres_release() later drops that pointer with dlm_put(). That
only works if open successfully pins the struct dlm_ctxt.
Today open calls dlm_grab(dlm) but ignores its return value. Once the
last domain unregister has removed the context from dlm_domains,
dlm_grab() returns NULL, yet open still stores the raw pointer and returns
success. The later release path is outside the debugfs removal barrier,
so it can call dlm_put() after dlm_free_ctxt_mem() has freed the context.
KASAN reports this as a slab-use-after-free in dlm_put() called from
debug_lockres_release().
Fail the open when dlm_grab() cannot acquire the reference and unwind the
seq_file private state before returning. That keeps locking_state from
handing out a file descriptor whose release path does not own the
dlm_ctxt.
The buggy scenario involves two paths, with each column showing the order
within that path:
locking_state debugfs open: last domain unregister:
1. debug_lockres_open() reads 1. dlm_unregister_domain() calls
inode->i_private. dlm_complete_dlm_shutdown().
2. debug_lockres_open() calls 2. shutdown removes the dlm_ctxt from
dlm_grab(dlm) and gets NULL. dlm_domains.
3. open still stores the raw dlm 3. final teardown reaches
pointer in dl->dl_ctxt and dlm_free_ctxt_mem() and frees it.
returns success.
4. debug_lockres_release() later
calls dlm_put(dl->dl_ctxt).
Validation reproduced this kernel report:
KASAN slab-use-after-free in dlm_put+0x82/0x200
RIP: 0033:0x7f4d349bc9e0
The buggy address belongs to the object at ffff888103a3c000 which belongs
to the cache kmalloc-2k of size 2048
The buggy address is located 816 bytes inside of freed 2048-byte region
[ffff888103a3c000, ffff888103a3c800)
Write of size 4
Call trace:
dump_stack_lvl+0x66/0xa0 (?:?)
print_report+0xd0/0x630 (?:?)
dlm_put+0x82/0x200 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x188/0x2f0 (?:?)
kasan_report+0xe4/0x120 (?:?)
kasan_check_range+0x105/0x1b0 (?:?)
debug_lockres_release+0x53/0x80 (fs/ocfs2/dlm/dlmdebug.c:587)
dlm_put+0x9/0x200 (?:?)
debug_lockres_release+0x5c/0x80 (fs/ocfs2/dlm/dlmdebug.c:587)
full_proxy_release+0x67/0x90 (?:?)
__fput+0x1df/0x4b0 (?:?)
do_raw_spin_lock+0x10f/0x1b0 (?:?)
fput_close_sync+0xd2/0x170 (?:?)
__x64_sys_close+0x55/0x90 (?:?)
do_syscall_64+0x10c/0x640 (arch/x86/entry/syscall_64.c:87)
irqentry_exit+0xac/0x6e0 (?:?)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?)
Freed by task stack:
kasan_save_stack+0x33/0x60 (?:?)
kasan_save_track+0x14/0x30 (?:?)
kasan_save_free_info+0x3b/0x60 (?:?)
__kasan_slab_free+0x5f/0x80 (?:?)
kfree+0x30f/0x580 (?:?)
dlm_put+0x1ce/0x200 (?:?)
dlm_unregister_domain+0xf6/0xb30 (?:?)
o2cb_cluster_disconnect+0x6b/0x90 (?:?)
ocfs2_cluster_disconnect+0x41/0x70 (?:?)
ocfs2_dlm_shutdown+0x1c4/0x220 (?:?)
ocfs2_dismount_volume+0x38a/0x550 (?:?)
generic_shutdown_super+0xc3/0x220 (?:?)
kill_block_super+0x29/0x60 (?:?)
deactivate_locked_super+0x66/0xe0 (?:?)
cleanup_mnt+0x13d/0x210 (?:?)
task_work_run+0xfa/0x170 (?:?)
exit_to_user_mode_loop+0xd6/0x430 (?:?)
do_syscall_64+0x3cb/0x640 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix OOB read during CQ MR registration
Sashiko pointed out an unrelated bug during a previous patch:
https://sashiko.dev/#/patchset/20260512183852.614045-1-jmoroni%40google.com
This change fixes the bug by eliminating the cqmr->split field which
was not being set properly and instead just checks the CQ resize
feature flag directly.
The cqmr->split field essentially tracks whether IRDMA_FEATURE_CQ_RESIZE
is set, but it was not being set until CQ creation time, which is _after_
CQ memory registration (the only other place where it is referenced).
As a result, it would always be false during MR registration and would
therefore cause irdma_handle_q_mem to populate cqmr->shadow even for GEN_2
HW and beyond:
cqmr->shadow = (dma_addr_t)arr[req->cq_pages];
The issue is that for GEN_2 and beyond, req->cq_pages may be exactly equal
to iwmr->page_cnt and therefore equal to the size of arr, which would cause
an OOB read by one. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Clear variable event pointer on read
snd_seq_read() copies a queued variable-length event header to userspace
before expanding the payload. Queued variable-length events use
SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first
extension cell.
The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the
copy, but it leaves data.ext.ptr untouched. A userspace sequencer client
can therefore write a direct variable event to itself and read back the
extension-cell kernel address from the returned header.
Clear the temporary header pointer before copy_to_user(). The original
queued event remains unchanged and is still passed to
snd_seq_expand_var_event(), so payload expansion keeps using the
internal chain. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: Fix recursive lock in device_cache_fw_images()
A recursive locking deadlock can occur in the firmware loader's power
management notification handler.
During system suspend or hibernation preparation, fw_pm_notify() calls
device_cache_fw_images(). This function acquires fw_lock to set the
firmware cache state to FW_LOADER_START_CACHE and then iterates over all
devices using dpm_for_each_dev() while still holding the lock.
For each device, dev_cache_fw_image() schedules asynchronous work to cache
the firmware. If memory allocation for the async work entry fails (e.g., in
out-of-memory conditions), async_schedule_node_domain() falls back to
executing the work function synchronously in the current thread.
The synchronous execution path (__async_dev_cache_fw_image() ->
cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire
fw_lock again. Since the current thread already holds fw_lock, this results
in a recursive locking deadlock.
Fix this by releasing fw_lock immediately after updating the cache state
and before calling dpm_for_each_dev(). The lock is only needed to protect
the state update. Concurrent firmware requests will correctly see the
FW_LOADER_START_CACHE state and use the piggyback mechanism, which is
independently protected by its own fwc->name_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: unregister PM notifier on watchdog unregister
watchdog_register_device() registers wdd->pm_nb when
WDOG_NO_PING_ON_SUSPEND is set, but watchdog_unregister_device() does not
remove it. This leaves an embedded notifier block on the PM notifier chain
after the watchdog device has been unregistered.
A later suspend/resume notification can then call watchdog_pm_notifier()
with a stale watchdog_device pointer, or at minimum after wdd->wd_data has
been cleared by watchdog_dev_unregister().
Unregister the PM notifier before tearing down the watchdog device. |
