| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: asix_devices: Fix PHY address mask in MDIO bus initialization
Syzbot reported shift-out-of-bounds exception on MDIO bus initialization.
The PHY address should be masked to 5 bits (0-31). Without this
mask, invalid PHY addresses could be used, potentially causing issues
with MDIO bus operations.
Fix this by masking the PHY address with 0x1f (31 decimal) to ensure
it stays within the valid range. |
| A vulnerability was found in D-Link DIR-825 1.08.01. This impacts the function get_ping6_app_stat of the file ping6_response.cg of the component httpd. Performing manipulation of the argument ping6_ipaddr results in buffer overflow. It is possible to initiate the attack remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| Insufficient parameter sanitization in TEE SOC Driver could allow an attacker to issue a malformed DRV_SOC_CMD_ID_SRIOV_SPATIAL_PART and cause read or write past the end of allocated arrays, potentially resulting in a loss of platform integrity or denial of service. |
| A NULL pointer dereference in AMD Crash Defender could allow an attacker to write a NULL output to a log file potentially resulting in a system crash and loss of availability. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix unbuffered write error handling
If all the subrequests in an unbuffered write stream fail, the subrequest
collector doesn't update the stream->transferred value and it retains its
initial LONG_MAX value. Unfortunately, if all active streams fail, then we
take the smallest value of { LONG_MAX, LONG_MAX, ... } as the value to set
in wreq->transferred - which is then returned from ->write_iter().
LONG_MAX was chosen as the initial value so that all the streams can be
quickly assessed by taking the smallest value of all stream->transferred -
but this only works if we've set any of them.
Fix this by adding a flag to indicate whether the value in
stream->transferred is valid and checking that when we integrate the
values. stream->transferred can then be initialised to zero.
This was found by running the generic/750 xfstest against cifs with
cache=none. It splices data to the target file. Once (if) it has used up
all the available scratch space, the writes start failing with ENOSPC.
This causes ->write_iter() to fail. However, it was returning
wreq->transferred, i.e. LONG_MAX, rather than an error (because it thought
the amount transferred was non-zero) and iter_file_splice_write() would
then try to clean up that amount of pipe bufferage - leading to an oops
when it overran. The kernel log showed:
CIFS: VFS: Send error in write = -28
followed by:
BUG: kernel NULL pointer dereference, address: 0000000000000008
with:
RIP: 0010:iter_file_splice_write+0x3a4/0x520
do_splice+0x197/0x4e0
or:
RIP: 0010:pipe_buf_release (include/linux/pipe_fs_i.h:282)
iter_file_splice_write (fs/splice.c:755)
Also put a warning check into splice to announce if ->write_iter() returned
that it had written more than it was asked to. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - flush misc workqueue during device shutdown
Repeated loading and unloading of a device specific QAT driver, for
example qat_4xxx, in a tight loop can lead to a crash due to a
use-after-free scenario. This occurs when a power management (PM)
interrupt triggers just before the device-specific driver (e.g.,
qat_4xxx.ko) is unloaded, while the core driver (intel_qat.ko) remains
loaded.
Since the driver uses a shared workqueue (`qat_misc_wq`) across all
devices and owned by intel_qat.ko, a deferred routine from the
device-specific driver may still be pending in the queue. If this
routine executes after the driver is unloaded, it can dereference freed
memory, resulting in a page fault and kernel crash like the following:
BUG: unable to handle page fault for address: ffa000002e50a01c
#PF: supervisor read access in kernel mode
RIP: 0010:pm_bh_handler+0x1d2/0x250 [intel_qat]
Call Trace:
pm_bh_handler+0x1d2/0x250 [intel_qat]
process_one_work+0x171/0x340
worker_thread+0x277/0x3a0
kthread+0xf0/0x120
ret_from_fork+0x2d/0x50
To prevent this, flush the misc workqueue during device shutdown to
ensure that all pending work items are completed before the driver is
unloaded.
Note: This approach may slightly increase shutdown latency if the
workqueue contains jobs from other devices, but it ensures correctness
and stability. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix refcount leak causing resource not released
When ksmbd_conn_releasing(opinfo->conn) returns true,the refcount was not
decremented properly, causing a refcount leak that prevents the count from
reaching zero and the memory from being released. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: Validate length in packet header before skb_put()
When receiving a vsock packet in the guest, only the virtqueue buffer
size is validated prior to virtio_vsock_skb_rx_put(). Unfortunately,
virtio_vsock_skb_rx_put() uses the length from the packet header as the
length argument to skb_put(), potentially resulting in SKB overflow if
the host has gone wonky.
Validate the length as advertised by the packet header before calling
virtio_vsock_skb_rx_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: Revise __get_user() to probe user read access
Because of the way read access support is implemented, read access
interruptions are only triggered at privilege levels 2 and 3. The
kernel executes at privilege level 0, so __get_user() never triggers
a read access interruption (code 26). Thus, it is currently possible
for user code to access a read protected address via a system call.
Fix this by probing read access rights at privilege level 3 (PRIV_USER)
and setting __gu_err to -EFAULT (-14) if access isn't allowed.
Note the cmpiclr instruction does a 32-bit compare because COND macro
doesn't work inside asm. |
| In the Linux kernel, the following vulnerability has been resolved:
parisc: Revise gateway LWS calls to probe user read access
We use load and stbys,e instructions to trigger memory reference
interruptions without writing to memory. Because of the way read
access support is implemented, read access interruptions are only
triggered at privilege levels 2 and 3. The kernel and gateway
page execute at privilege level 0, so this code never triggers
a read access interruption. Thus, it is currently possible for
user code to execute a LWS compare and swap operation at an
address that is read protected at privilege level 3 (PRIV_USER).
Fix this by probing read access rights at privilege level 3 and
branching to lws_fault if access isn't allowed. |
| In the Linux kernel, the following vulnerability has been resolved:
media: usbtv: Lock resolution while streaming
When an program is streaming (ffplay) and another program (qv4l2)
changes the TV standard from NTSC to PAL, the kernel crashes due to trying
to copy to unmapped memory.
Changing from NTSC to PAL increases the resolution in the usbtv struct,
but the video plane buffer isn't adjusted, so it overflows.
[hverkuil: call vb2_is_busy instead of vb2_is_streaming] |
| In the Linux kernel, the following vulnerability has been resolved:
media: venus: Add a check for packet size after reading from shared memory
Add a check to ensure that the packet size does not exceed the number of
available words after reading the packet header from shared memory. This
ensures that the size provided by the firmware is safe to process and
prevent potential out-of-bounds memory access. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: Fix NULL pointer dereference
A warning reported by smatch indicated a possible null pointer
dereference where one of the arguments to API
"iris_hfi_gen2_handle_system_error" could sometimes be null.
To fix this, add a check to validate that the argument passed is not
null before accessing its members. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Destroy KFD debugfs after destroy KFD wq
Since KFD proc content was moved to kernel debugfs, we can't destroy KFD
debugfs before kfd_process_destroy_wq. Move kfd_process_destroy_wq prior
to kfd_debugfs_fini to fix a kernel NULL pointer problem. It happens
when /sys/kernel/debug/kfd was already destroyed in kfd_debugfs_fini but
kfd_process_destroy_wq calls kfd_debugfs_remove_process. This line
debugfs_remove_recursive(entry->proc_dentry);
tries to remove /sys/kernel/debug/kfd/proc/<pid> while
/sys/kernel/debug/kfd is already gone. It hangs the kernel by kernel
NULL pointer.
(cherry picked from commit 0333052d90683d88531558dcfdbf2525cc37c233) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix a Null pointer dereference vulnerability
[Why]
A null pointer dereference vulnerability exists in the AMD display driver's
(DC module) cleanup function dc_destruct().
When display control context (dc->ctx) construction fails
(due to memory allocation failure), this pointer remains NULL.
During subsequent error handling when dc_destruct() is called,
there's no NULL check before dereferencing the perf_trace member
(dc->ctx->perf_trace), causing a kernel null pointer dereference crash.
[How]
Check if dc->ctx is non-NULL before dereferencing.
(Updated commit text and removed unnecessary error message)
(cherry picked from commit 9dd8e2ba268c636c240a918e0a31e6feaee19404) |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: pfr_update: Fix the driver update version check
The security-version-number check should be used rather
than the runtime version check for driver updates.
Otherwise, the firmware update would fail when the update binary had
a lower runtime version number than the current one.
[ rjw: Changelog edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/riscv: prevent NULL deref in iova_to_phys
The riscv_iommu_pte_fetch() function returns either NULL for
unmapped/never-mapped iova, or a valid leaf pte pointer that
requires no further validation.
riscv_iommu_iova_to_phys() failed to handle NULL returns.
Prevent null pointer dereference in
riscv_iommu_iova_to_phys(), and remove the pte validation. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/futex: ensure io_futex_wait() cleans up properly on failure
The io_futex_data is allocated upfront and assigned to the io_kiocb
async_data field, but the request isn't marked with REQ_F_ASYNC_DATA
at that point. Those two should always go together, as the flag tells
io_uring whether the field is valid or not.
Additionally, on failure cleanup, the futex handler frees the data but
does not clear ->async_data. Clear the data and the flag in the error
path as well.
Thanks to Trend Micro Zero Day Initiative and particularly ReDress for
reporting this. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Fix a race when updating an existing write
After nfs_lock_and_join_requests() tests for whether the request is
still attached to the mapping, nothing prevents a call to
nfs_inode_remove_request() from succeeding until we actually lock the
page group.
The reason is that whoever called nfs_inode_remove_request() doesn't
necessarily have a lock on the page group head.
So in order to avoid races, let's take the page group lock earlier in
nfs_lock_and_join_requests(), and hold it across the removal of the
request in nfs_inode_remove_request(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Flush delayed SKBs while releasing RXE resources
When skb packets are sent out, these skb packets still depends on
the rxe resources, for example, QP, sk, when these packets are
destroyed.
If these rxe resources are released when the skb packets are destroyed,
the call traces will appear.
To avoid skb packets hang too long time in some network devices,
a timestamp is added when these skb packets are created. If these
skb packets hang too long time in network devices, these network
devices can free these skb packets to release rxe resources. |
