| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: red: fix a race in __red_change()
Gerrard Tai reported a race condition in RED, whenever SFQ perturb timer
fires at the wrong time.
The race is as follows:
CPU 0 CPU 1
[1]: lock root
[2]: qdisc_tree_flush_backlog()
[3]: unlock root
|
| [5]: lock root
| [6]: rehash
| [7]: qdisc_tree_reduce_backlog()
|
[4]: qdisc_put()
This can be abused to underflow a parent's qlen.
Calling qdisc_purge_queue() instead of qdisc_tree_flush_backlog()
should fix the race, because all packets will be purged from the qdisc
before releasing the lock. |
| A stored cross-site scripting (XSS) vulnerability exists with radio button type custom fields in Liferay Portal 7.2.0 through 7.4.3.129, and Liferay DXP 2024.Q4.1 through 2024.Q4.7, 2024.Q3.1 through 2024.Q3.9, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.12, 2023.Q4.0 through 2023.Q4.10, 2023.Q3.1 through 2023.Q3.10, 7.4 GA through update 92, 7.3 GA through update 36, and 7.2 GA through fix pack 20 allows remote authenticated attackers to inject malicious JavaScript into a page. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: correct handling of extreme memory squeeze
Testing with iperf3 using the "pasta" protocol splicer has revealed
a problem in the way tcp handles window advertising in extreme memory
squeeze situations.
Under memory pressure, a socket endpoint may temporarily advertise
a zero-sized window, but this is not stored as part of the socket data.
The reasoning behind this is that it is considered a temporary setting
which shouldn't influence any further calculations.
However, if we happen to stall at an unfortunate value of the current
window size, the algorithm selecting a new value will consistently fail
to advertise a non-zero window once we have freed up enough memory.
This means that this side's notion of the current window size is
different from the one last advertised to the peer, causing the latter
to not send any data to resolve the sitution.
The problem occurs on the iperf3 server side, and the socket in question
is a completely regular socket with the default settings for the
fedora40 kernel. We do not use SO_PEEK or SO_RCVBUF on the socket.
The following excerpt of a logging session, with own comments added,
shows more in detail what is happening:
// tcp_v4_rcv(->)
// tcp_rcv_established(->)
[5201<->39222]: ==== Activating log @ net/ipv4/tcp_input.c/tcp_data_queue()/5257 ====
[5201<->39222]: tcp_data_queue(->)
[5201<->39222]: DROPPING skb [265600160..265665640], reason: SKB_DROP_REASON_PROTO_MEM
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 259909392->260034360 (124968), unread 5565800, qlen 85, ofoq 0]
[OFO queue: gap: 65480, len: 0]
[5201<->39222]: tcp_data_queue(<-)
[5201<->39222]: __tcp_transmit_skb(->)
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: tcp_select_window(->)
[5201<->39222]: (inet_csk(sk)->icsk_ack.pending & ICSK_ACK_NOMEM) ? --> TRUE
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
returning 0
[5201<->39222]: tcp_select_window(<-)
[5201<->39222]: ADVERTISING WIN 0, ACK_SEQ: 265600160
[5201<->39222]: [__tcp_transmit_skb(<-)
[5201<->39222]: tcp_rcv_established(<-)
[5201<->39222]: tcp_v4_rcv(<-)
// Receive queue is at 85 buffers and we are out of memory.
// We drop the incoming buffer, although it is in sequence, and decide
// to send an advertisement with a window of zero.
// We don't update tp->rcv_wnd and tp->rcv_wup accordingly, which means
// we unconditionally shrink the window.
[5201<->39222]: tcp_recvmsg_locked(->)
[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160
[5201<->39222]: [new_win = 0, win_now = 131184, 2 * win_now = 262368]
[5201<->39222]: [new_win >= (2 * win_now) ? --> time_to_ack = 0]
[5201<->39222]: NOT calling tcp_send_ack()
[tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160]
[5201<->39222]: __tcp_cleanup_rbuf(<-)
[rcv_nxt 265600160, rcv_wnd 262144, snt_ack 265469200, win_now 131184]
[copied_seq 260040464->260040464 (0), unread 5559696, qlen 85, ofoq 0]
returning 6104 bytes
[5201<->39222]: tcp_recvmsg_locked(<-)
// After each read, the algorithm for calculating the new receive
// window in __tcp_cleanup_rbuf() finds it is too small to advertise
// or to update tp->rcv_wnd.
// Meanwhile, the peer thinks the window is zero, and will not send
// any more data to trigger an update from the interrupt mode side.
[5201<->39222]: tcp_recvmsg_locked(->)
[5201<->39222]: __tcp_cleanup_rbuf(->) tp->rcv_wup: 265469200, tp->rcv_wnd: 262144, tp->rcv_nxt 265600160
[5201<->39222]: [new_win = 262144, win_now = 131184, 2 * win_n
---truncated--- |
| A reflected cross-site scripting (XSS) vulnerability in the Liferay Portal 7.4.3.132, and Liferay DXP 2025.Q1.0 through 2025.Q1.7 allows a remote authenticated attacker to inject JavaScript code via the content page's name field. This malicious payload is then reflected and executed within the user's browser when viewing the "document View Usages" page. |
| A reflected cross-site scripting (XSS) vulnerability in the Liferay Portal 7.4.0 through 7.4.3.132, and Liferay DXP 2025.Q1.0 through 2025.Q1.10, 2024.Q4.0 through 2024.Q4.7, 2024.Q3.1 through 2024.Q3.13, 2024.Q2.1 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.16 and 7.4 GA through update 92 allows a remote authenticated attacker to inject JavaScript code in the “first display label” field in the configuration of a custom sort widget. This malicious payload is then reflected and executed by clay button taglib when refreshing the page. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mdiobus: Fix potential out-of-bounds read/write access
When using publicly available tools like 'mdio-tools' to read/write data
from/to network interface and its PHY via mdiobus, there is no verification of
parameters passed to the ioctl and it accepts any mdio address.
Currently there is support for 32 addresses in kernel via PHY_MAX_ADDR define,
but it is possible to pass higher value than that via ioctl.
While read/write operation should generally fail in this case,
mdiobus provides stats array, where wrong address may allow out-of-bounds
read/write.
Fix that by adding address verification before read/write operation.
While this excludes this access from any statistics, it improves security of
read/write operation. |
| A reflected cross-site scripting (XSS) vulnerability in the Liferay Portal 7.4.0 through 7.4.3.131, and Liferay DXP 2024.Q4.0 through 2024.Q4.7, 2024.Q3.1 through 2024.Q3.13, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.12 and 7.4 GA through update 92 allows an remote non-authenticated attacker to inject JavaScript into the google_gadget. |
| A Denial Of Service via File Upload (DOS) vulnerability in the Liferay Portal 7.4.3.0 through 7.4.3.132, and Liferay DXP 2025.Q1.0 through 2025.Q1.8, 2024.Q4.0 through 2024.Q4.7, 2024.Q3.0 through 2024.Q3.13, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.16 and 7.4 GA through update 92 allows a user to upload more than 300kb profile picture into the user profile. This size more than the noted max 300kb size. This extra amount of data can make Liferay slower. |
| The WPshop 2 – E-Commerce plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in the ajaxUpload function in versions before 1.3.9.6. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected sites server which may make remote code execution possible. |
| A reflected cross-site scripting (XSS) vulnerability in the Liferay Portal 7.4.0 through 7.4.3.131, and Liferay DXP 2024.Q4.0 through 2024.Q4.5, 2024.Q3.1 through 2024.Q3.13, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.12, 7.4 GA through update 92 allows an remote non-authenticated attacker to inject JavaScript into the modules/apps/marketplace/marketplace-app-manager-web. |
| Liferay Portal 7.4.0 through 7.4.3.132, and Liferay DXP 2025.Q1.0 through 2025.Q1.4 ,2024.Q4.0 through 2024.Q4.7, 2024.Q3.1 through 2024.Q3.13, 2024.Q2.0 through 2024.Q2.13, 2024.Q1.1 through 2024.Q1.15, 7.4 GA through update 92 allows a pre-authentication blind SSRF vulnerability in the portal-settings-authentication-opensso-web due to improper validation of user-supplied URLs. An attacker can exploit this issue to force the server to make arbitrary HTTP requests to internal systems, potentially leading to internal network enumeration or further exploitation. |
| The GI-Media Library plugin for WordPress is vulnerable to Directory Traversal in versions before 3.0 via the 'fileid' parameter. This allows unauthenticated attackers to read the contents of arbitrary files on the server, which can contain sensitive information. |
| Insecure direct object reference (IDOR) vulnerability in the Contacts Center widget in Liferay Portal 7.4.0 through 7.4.3.119, and older unsupported versions, and Liferay DXP 2023.Q4.0 through 2023.Q4.6, 2023.Q3.1 through 2023.Q3.10, 7.4 GA through update 92, and older unsupported versions allows remote attackers to view contact information, including the contact’s name and email address, via the _com_liferay_contacts_web_portlet_ContactsCenterPortlet_entryId parameter. |
| Liferay Portal 7.4.0 through 7.4.3.111, and older unsupported versions, and Liferay DXP 2023.Q4.0, 2023.Q3.1 through 2023.Q3.4, 7.4 GA through update 92 and 7.3 GA through update 35, and older unsupported versions does not limit access to APIs before a user has changed their initial password, which allows remote users to access and edit content via the API. |
| The WP Mobile Detector plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation in resize.php file in versions up to, and including, 3.5. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected sites server which may make remote code execution possible. |
| Liferay DXP 2023.Q4.0, 2023.Q3.1 through 2023.Q3.4, 7.4 GA through update 92 and 7.3 GA through update 35 allows a time-based one-time password (TOTP) to be used multiple times during the validity period, which allows attackers with access to a user’s TOTP to authenticate as the user. |
| Exposure of Private Personal Information to an Unauthorized Actor vulnerability in RTI Connext Professional (Core Libraries) allows Sniffing Network Traffic.This issue affects Connext Professional: from 7.4.0 before 7.*, from 7.2.0 before 7.3.1. |
| Akaunting 3.1.8 contains a server-side template injection vulnerability that allows authenticated administrators to execute template expressions in multiple form input fields. Attackers can inject template payloads in items, taxes, transactions, and vendor name fields to perform arithmetic operations and string manipulations. |
| FreePBX 16 contains an authenticated remote code execution vulnerability in the API module that allows attackers with valid session credentials to execute arbitrary commands. Attackers can exploit the 'generatedocs' endpoint by crafting malicious POST requests with bash command injection to establish remote shell access. |
| ElkArte Forum 1.1.9 contains a remote code execution vulnerability that allows authenticated administrators to upload malicious PHP files through the theme installation process. Attackers can upload a ZIP archive with a PHP file containing system commands, which can then be executed by accessing the uploaded file in the theme directory. |
