| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix config page DMA memory leak
A fix for:
DMA-API: pci 0000:83:00.0: device driver has pending DMA allocations while released from device [count=1] |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: tcp_make_synack() can be called from process context
tcp_rtx_synack() now could be called in process context as explained in
0a375c822497 ("tcp: tcp_rtx_synack() can be called from process
context").
tcp_rtx_synack() might call tcp_make_synack(), which will touch per-CPU
variables with preemption enabled. This causes the following BUG:
BUG: using __this_cpu_add() in preemptible [00000000] code: ThriftIO1/5464
caller is tcp_make_synack+0x841/0xac0
Call Trace:
<TASK>
dump_stack_lvl+0x10d/0x1a0
check_preemption_disabled+0x104/0x110
tcp_make_synack+0x841/0xac0
tcp_v6_send_synack+0x5c/0x450
tcp_rtx_synack+0xeb/0x1f0
inet_rtx_syn_ack+0x34/0x60
tcp_check_req+0x3af/0x9e0
tcp_rcv_state_process+0x59b/0x2030
tcp_v6_do_rcv+0x5f5/0x700
release_sock+0x3a/0xf0
tcp_sendmsg+0x33/0x40
____sys_sendmsg+0x2f2/0x490
__sys_sendmsg+0x184/0x230
do_syscall_64+0x3d/0x90
Avoid calling __TCP_INC_STATS() with will touch per-cpu variables. Use
TCP_INC_STATS() which is safe to be called from context switch. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: s390: Fix use-after-free of PCI resources with per-function hotplug
On s390 PCI functions may be hotplugged individually even when they
belong to a multi-function device. In particular on an SR-IOV device VFs
may be removed and later re-added.
In commit a50297cf8235 ("s390/pci: separate zbus creation from
scanning") it was missed however that struct pci_bus and struct
zpci_bus's resource list retained a reference to the PCI functions MMIO
resources even though those resources are released and freed on
hot-unplug. These stale resources may subsequently be claimed when the
PCI function re-appears resulting in use-after-free.
One idea of fixing this use-after-free in s390 specific code that was
investigated was to simply keep resources around from the moment a PCI
function first appeared until the whole virtual PCI bus created for
a multi-function device disappears. The problem with this however is
that due to the requirement of artificial MMIO addreesses (address
cookies) extra logic is then needed to keep the address cookies
compatible on re-plug. At the same time the MMIO resources semantically
belong to the PCI function so tying their lifecycle to the function
seems more logical.
Instead a simpler approach is to remove the resources of an individually
hot-unplugged PCI function from the PCI bus's resource list while
keeping the resources of other PCI functions on the PCI bus untouched.
This is done by introducing pci_bus_remove_resource() to remove an
individual resource. Similarly the resource also needs to be removed
from the struct zpci_bus's resource list. It turns out however, that
there is really no need to add the MMIO resources to the struct
zpci_bus's resource list at all and instead we can simply use the
zpci_bar_struct's resource pointer directly. |
| Youki is a container runtime written in Rust. Prior to version 0.5.5, if /proc and /sys in the rootfs are symbolic links, they can potentially be exploited to gain access to the host root filesystem. This issue has been patched in version 0.5.5. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Fix NULL pointer access in mpt3sas_transport_port_add()
Port is allocated by sas_port_alloc_num() and rphy is allocated by either
sas_end_device_alloc() or sas_expander_alloc(), all of which may return
NULL. So we need to check the rphy to avoid possible NULL pointer access.
If sas_rphy_add() returned with failure, rphy is set to NULL. We would
access the rphy in the following lines which would also result NULL pointer
access. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: smsc75xx: Limit packet length to skb->len
Packet length retrieved from skb data may be larger than
the actual socket buffer length (up to 9026 bytes). In such
case the cloned skb passed up the network stack will leak
kernel memory contents. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix sas_hba.phy memory leak in mpi3mr_remove()
Free mrioc->sas_hba.phy at .remove. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix expander node leak in mpi3mr_remove()
Add a missing resource clean up in .remove. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix throttle_groups memory leak
Add a missing kfree(). |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Fix a server shutdown leak
Fix a race where kthread_stop() may prevent the threadfn from ever getting
called. If that happens the svc_rqst will not be cleaned up. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix mpi3mr_hba_port memory leak in mpi3mr_remove()
Free mpi3mr_hba_port at .remove. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix an infinite loop error when len is 0 in tcp_bpf_recvmsg_parser()
When the buffer length of the recvmsg system call is 0, we got the
flollowing soft lockup problem:
watchdog: BUG: soft lockup - CPU#3 stuck for 27s! [a.out:6149]
CPU: 3 PID: 6149 Comm: a.out Kdump: loaded Not tainted 6.2.0+ #30
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:remove_wait_queue+0xb/0xc0
Code: 5e 41 5f c3 cc cc cc cc 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 0f 1f 44 00 00 41 57 <41> 56 41 55 41 54 55 48 89 fd 53 48 89 f3 4c 8d 6b 18 4c 8d 73 20
RSP: 0018:ffff88811b5978b8 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff88811a7d3780 RCX: ffffffffb7a4d768
RDX: dffffc0000000000 RSI: ffff88811b597908 RDI: ffff888115408040
RBP: 1ffff110236b2f1b R08: 0000000000000000 R09: ffff88811a7d37e7
R10: ffffed10234fa6fc R11: 0000000000000001 R12: ffff88811179b800
R13: 0000000000000001 R14: ffff88811a7d38a8 R15: ffff88811a7d37e0
FS: 00007f6fb5398740(0000) GS:ffff888237180000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000000 CR3: 000000010b6ba002 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tcp_msg_wait_data+0x279/0x2f0
tcp_bpf_recvmsg_parser+0x3c6/0x490
inet_recvmsg+0x280/0x290
sock_recvmsg+0xfc/0x120
____sys_recvmsg+0x160/0x3d0
___sys_recvmsg+0xf0/0x180
__sys_recvmsg+0xea/0x1a0
do_syscall_64+0x3f/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
The logic in tcp_bpf_recvmsg_parser is as follows:
msg_bytes_ready:
copied = sk_msg_recvmsg(sk, psock, msg, len, flags);
if (!copied) {
wait data;
goto msg_bytes_ready;
}
In this case, "copied" always is 0, the infinite loop occurs.
According to the Linux system call man page, 0 should be returned in this
case. Therefore, in tcp_bpf_recvmsg_parser(), if the length is 0, directly
return. Also modify several other functions with the same problem. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Avoid order-5 memory allocation for TPA data
The driver needs to keep track of all the possible concurrent TPA (GRO/LRO)
completions on the aggregation ring. On P5 chips, the maximum number
of concurrent TPA is 256 and the amount of memory we allocate is order-5
on systems using 4K pages. Memory allocation failure has been reported:
NetworkManager: page allocation failure: order:5, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0-1
CPU: 15 PID: 2995 Comm: NetworkManager Kdump: loaded Not tainted 5.10.156 #1
Hardware name: Dell Inc. PowerEdge R660/0M1CC5, BIOS 0.2.25 08/12/2022
Call Trace:
dump_stack+0x57/0x6e
warn_alloc.cold.120+0x7b/0xdd
? _cond_resched+0x15/0x30
? __alloc_pages_direct_compact+0x15f/0x170
__alloc_pages_slowpath.constprop.108+0xc58/0xc70
__alloc_pages_nodemask+0x2d0/0x300
kmalloc_order+0x24/0xe0
kmalloc_order_trace+0x19/0x80
bnxt_alloc_mem+0x1150/0x15c0 [bnxt_en]
? bnxt_get_func_stat_ctxs+0x13/0x60 [bnxt_en]
__bnxt_open_nic+0x12e/0x780 [bnxt_en]
bnxt_open+0x10b/0x240 [bnxt_en]
__dev_open+0xe9/0x180
__dev_change_flags+0x1af/0x220
dev_change_flags+0x21/0x60
do_setlink+0x35c/0x1100
Instead of allocating this big chunk of memory and dividing it up for the
concurrent TPA instances, allocate each small chunk separately for each
TPA instance. This will reduce it to order-0 allocations. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Use READ_ONCE_NOCHECK in imprecise unwinding stack mode
When CONFIG_FRAME_POINTER is unset, the stack unwinding function
walk_stackframe randomly reads the stack and then, when KASAN is enabled,
it can lead to the following backtrace:
[ 0.000000] ==================================================================
[ 0.000000] BUG: KASAN: stack-out-of-bounds in walk_stackframe+0xa6/0x11a
[ 0.000000] Read of size 8 at addr ffffffff81807c40 by task swapper/0
[ 0.000000]
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.2.0-12919-g24203e6db61f #43
[ 0.000000] Hardware name: riscv-virtio,qemu (DT)
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff80007ba8>] walk_stackframe+0x0/0x11a
[ 0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a
[ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[ 0.000000] [<ffffffff80c49c80>] dump_stack_lvl+0x22/0x36
[ 0.000000] [<ffffffff80c3783e>] print_report+0x198/0x4a8
[ 0.000000] [<ffffffff80099ecc>] init_param_lock+0x26/0x2a
[ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[ 0.000000] [<ffffffff8015f68a>] kasan_report+0x9a/0xc8
[ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[ 0.000000] [<ffffffff80007c4a>] walk_stackframe+0xa2/0x11a
[ 0.000000] [<ffffffff8006e99c>] desc_make_final+0x80/0x84
[ 0.000000] [<ffffffff8009a04e>] stack_trace_save+0x88/0xa6
[ 0.000000] [<ffffffff80099fc2>] filter_irq_stacks+0x72/0x76
[ 0.000000] [<ffffffff8006b95e>] devkmsg_read+0x32a/0x32e
[ 0.000000] [<ffffffff8015ec16>] kasan_save_stack+0x28/0x52
[ 0.000000] [<ffffffff8006e998>] desc_make_final+0x7c/0x84
[ 0.000000] [<ffffffff8009a04a>] stack_trace_save+0x84/0xa6
[ 0.000000] [<ffffffff8015ec52>] kasan_set_track+0x12/0x20
[ 0.000000] [<ffffffff8015f22e>] __kasan_slab_alloc+0x58/0x5e
[ 0.000000] [<ffffffff8015e7ea>] __kmem_cache_create+0x21e/0x39a
[ 0.000000] [<ffffffff80e133ac>] create_boot_cache+0x70/0x9c
[ 0.000000] [<ffffffff80e17ab2>] kmem_cache_init+0x6c/0x11e
[ 0.000000] [<ffffffff80e00fd6>] mm_init+0xd8/0xfe
[ 0.000000] [<ffffffff80e011d8>] start_kernel+0x190/0x3ca
[ 0.000000]
[ 0.000000] The buggy address belongs to stack of task swapper/0
[ 0.000000] and is located at offset 0 in frame:
[ 0.000000] stack_trace_save+0x0/0xa6
[ 0.000000]
[ 0.000000] This frame has 1 object:
[ 0.000000] [32, 56) 'c'
[ 0.000000]
[ 0.000000] The buggy address belongs to the physical page:
[ 0.000000] page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x81a07
[ 0.000000] flags: 0x1000(reserved|zone=0)
[ 0.000000] raw: 0000000000001000 ff600003f1e3d150 ff600003f1e3d150 0000000000000000
[ 0.000000] raw: 0000000000000000 0000000000000000 00000001ffffffff
[ 0.000000] page dumped because: kasan: bad access detected
[ 0.000000]
[ 0.000000] Memory state around the buggy address:
[ 0.000000] ffffffff81807b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] ffffffff81807b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] >ffffffff81807c00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 f3
[ 0.000000] ^
[ 0.000000] ffffffff81807c80: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] ffffffff81807d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 0.000000] ==================================================================
Fix that by using READ_ONCE_NOCHECK when reading the stack in imprecise
mode. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: fix struct pid leaks in OOB support
syzbot reported struct pid leak [1].
Issue is that queue_oob() calls maybe_add_creds() which potentially
holds a reference on a pid.
But skb->destructor is not set (either directly or by calling
unix_scm_to_skb())
This means that subsequent kfree_skb() or consume_skb() would leak
this reference.
In this fix, I chose to fully support scm even for the OOB message.
[1]
BUG: memory leak
unreferenced object 0xffff8881053e7f80 (size 128):
comm "syz-executor242", pid 5066, jiffies 4294946079 (age 13.220s)
hex dump (first 32 bytes):
01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff812ae26a>] alloc_pid+0x6a/0x560 kernel/pid.c:180
[<ffffffff812718df>] copy_process+0x169f/0x26c0 kernel/fork.c:2285
[<ffffffff81272b37>] kernel_clone+0xf7/0x610 kernel/fork.c:2684
[<ffffffff812730cc>] __do_sys_clone+0x7c/0xb0 kernel/fork.c:2825
[<ffffffff849ad699>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff849ad699>] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
[<ffffffff84a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
net: caif: Fix use-after-free in cfusbl_device_notify()
syzbot reported use-after-free in cfusbl_device_notify() [1]. This
causes a stack trace like below:
BUG: KASAN: use-after-free in cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138
Read of size 8 at addr ffff88807ac4e6f0 by task kworker/u4:6/1214
CPU: 0 PID: 1214 Comm: kworker/u4:6 Not tainted 5.19.0-rc3-syzkaller-00146-g92f20ff72066 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: netns cleanup_net
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0xeb/0x467 mm/kasan/report.c:313
print_report mm/kasan/report.c:429 [inline]
kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491
cfusbl_device_notify+0x7c9/0x870 net/caif/caif_usb.c:138
notifier_call_chain+0xb5/0x200 kernel/notifier.c:87
call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945
call_netdevice_notifiers_extack net/core/dev.c:1983 [inline]
call_netdevice_notifiers net/core/dev.c:1997 [inline]
netdev_wait_allrefs_any net/core/dev.c:10227 [inline]
netdev_run_todo+0xbc0/0x10f0 net/core/dev.c:10341
default_device_exit_batch+0x44e/0x590 net/core/dev.c:11334
ops_exit_list+0x125/0x170 net/core/net_namespace.c:167
cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594
process_one_work+0x996/0x1610 kernel/workqueue.c:2289
worker_thread+0x665/0x1080 kernel/workqueue.c:2436
kthread+0x2e9/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302
</TASK>
When unregistering a net device, unregister_netdevice_many_notify()
sets the device's reg_state to NETREG_UNREGISTERING, calls notifiers
with NETDEV_UNREGISTER, and adds the device to the todo list.
Later on, devices in the todo list are processed by netdev_run_todo().
netdev_run_todo() waits devices' reference count become 1 while
rebdoadcasting NETDEV_UNREGISTER notification.
When cfusbl_device_notify() is called with NETDEV_UNREGISTER multiple
times, the parent device might be freed. This could cause UAF.
Processing NETDEV_UNREGISTER multiple times also causes inbalance of
reference count for the module.
This patch fixes the issue by accepting only first NETDEV_UNREGISTER
notification. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: fdp: add null check of devm_kmalloc_array in fdp_nci_i2c_read_device_properties
devm_kmalloc_array may fails, *fw_vsc_cfg might be null and cause
out-of-bounds write in device_property_read_u8_array later. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Remove the /proc/scsi/${proc_name} directory earlier
Remove the /proc/scsi/${proc_name} directory earlier to fix a race
condition between unloading and reloading kernel modules. This fixes a bug
introduced in 2009 by commit 77c019768f06 ("[SCSI] fix /proc memory leak in
the SCSI core").
Fix the following kernel warning:
proc_dir_entry 'scsi/scsi_debug' already registered
WARNING: CPU: 19 PID: 27986 at fs/proc/generic.c:376 proc_register+0x27d/0x2e0
Call Trace:
proc_mkdir+0xb5/0xe0
scsi_proc_hostdir_add+0xb5/0x170
scsi_host_alloc+0x683/0x6c0
sdebug_driver_probe+0x6b/0x2d0 [scsi_debug]
really_probe+0x159/0x540
__driver_probe_device+0xdc/0x230
driver_probe_device+0x4f/0x120
__device_attach_driver+0xef/0x180
bus_for_each_drv+0xe5/0x130
__device_attach+0x127/0x290
device_initial_probe+0x17/0x20
bus_probe_device+0x110/0x130
device_add+0x673/0xc80
device_register+0x1e/0x30
sdebug_add_host_helper+0x1a7/0x3b0 [scsi_debug]
scsi_debug_init+0x64f/0x1000 [scsi_debug]
do_one_initcall+0xd7/0x470
do_init_module+0xe7/0x330
load_module+0x122a/0x12c0
__do_sys_finit_module+0x124/0x1a0
__x64_sys_finit_module+0x46/0x50
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0 |
| In the Linux kernel, the following vulnerability has been resolved:
ila: do not generate empty messages in ila_xlat_nl_cmd_get_mapping()
ila_xlat_nl_cmd_get_mapping() generates an empty skb,
triggerring a recent sanity check [1].
Instead, return an error code, so that user space
can get it.
[1]
skb_assert_len
WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 skb_assert_len include/linux/skbuff.h:2527 [inline]
WARNING: CPU: 0 PID: 5923 at include/linux/skbuff.h:2527 __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
Modules linked in:
CPU: 0 PID: 5923 Comm: syz-executor269 Not tainted 6.2.0-syzkaller-18300-g2ebd1fbb946d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/21/2023
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : skb_assert_len include/linux/skbuff.h:2527 [inline]
pc : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
lr : skb_assert_len include/linux/skbuff.h:2527 [inline]
lr : __dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
sp : ffff80001e0d6c40
x29: ffff80001e0d6e60 x28: dfff800000000000 x27: ffff0000c86328c0
x26: dfff800000000000 x25: ffff0000c8632990 x24: ffff0000c8632a00
x23: 0000000000000000 x22: 1fffe000190c6542 x21: ffff0000c8632a10
x20: ffff0000c8632a00 x19: ffff80001856e000 x18: ffff80001e0d5fc0
x17: 0000000000000000 x16: ffff80001235d16c x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001
x11: ff80800008353a30 x10: 0000000000000000 x9 : 21567eaf25bfb600
x8 : 21567eaf25bfb600 x7 : 0000000000000001 x6 : 0000000000000001
x5 : ffff80001e0d6558 x4 : ffff800015c74760 x3 : ffff800008596744
x2 : 0000000000000001 x1 : 0000000100000000 x0 : 000000000000000e
Call trace:
skb_assert_len include/linux/skbuff.h:2527 [inline]
__dev_queue_xmit+0x1bc0/0x3488 net/core/dev.c:4156
dev_queue_xmit include/linux/netdevice.h:3033 [inline]
__netlink_deliver_tap_skb net/netlink/af_netlink.c:307 [inline]
__netlink_deliver_tap+0x45c/0x6f8 net/netlink/af_netlink.c:325
netlink_deliver_tap+0xf4/0x174 net/netlink/af_netlink.c:338
__netlink_sendskb net/netlink/af_netlink.c:1283 [inline]
netlink_sendskb+0x6c/0x154 net/netlink/af_netlink.c:1292
netlink_unicast+0x334/0x8d4 net/netlink/af_netlink.c:1380
nlmsg_unicast include/net/netlink.h:1099 [inline]
genlmsg_unicast include/net/genetlink.h:433 [inline]
genlmsg_reply include/net/genetlink.h:443 [inline]
ila_xlat_nl_cmd_get_mapping+0x620/0x7d0 net/ipv6/ila/ila_xlat.c:493
genl_family_rcv_msg_doit net/netlink/genetlink.c:968 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:1048 [inline]
genl_rcv_msg+0x938/0xc1c net/netlink/genetlink.c:1065
netlink_rcv_skb+0x214/0x3c4 net/netlink/af_netlink.c:2574
genl_rcv+0x38/0x50 net/netlink/genetlink.c:1076
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x660/0x8d4 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x800/0xae0 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x558/0x844 net/socket.c:2479
___sys_sendmsg net/socket.c:2533 [inline]
__sys_sendmsg+0x26c/0x33c net/socket.c:2562
__do_sys_sendmsg net/socket.c:2571 [inline]
__se_sys_sendmsg net/socket.c:2569 [inline]
__arm64_sys_sendmsg+0x80/0x94 net/socket.c:2569
__invoke_syscall arch/arm64/kernel/syscall.c:38 [inline]
invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52
el0_svc_common+0x138/0x258 arch/arm64/kernel/syscall.c:142
do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193
el0_svc+0x58/0x168 arch/arm64/kernel/entry-common.c:637
el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655
el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
irq event stamp: 136484
hardirqs last enabled at (136483): [<ffff800008350244>] __up_console_sem+0x60/0xb4 kernel/printk/printk.c:345
hardirqs last disabled at (136484): [<ffff800012358d60>] el1_dbg+0x24/0x80 arch/arm64/kernel/entry-common.c:405
softirqs last enabled at (136418): [<ffff800008020ea8>] softirq_ha
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ice: copy last block omitted in ice_get_module_eeprom()
ice_get_module_eeprom() is broken since commit e9c9692c8a81 ("ice:
Reimplement module reads used by ethtool") In this refactor,
ice_get_module_eeprom() reads the eeprom in blocks of size 8.
But the condition that should protect the buffer overflow
ignores the last block. The last block always contains zeros.
Bug uncovered by ethtool upstream commit 9538f384b535
("netlink: eeprom: Defer page requests to individual parsers")
After this commit, ethtool reads a block with length = 1;
to read the SFF-8024 identifier value.
unpatched driver:
$ ethtool -m enp65s0f0np0 offset 0x90 length 8
Offset Values
------ ------
0x0090: 00 00 00 00 00 00 00 00
$ ethtool -m enp65s0f0np0 offset 0x90 length 12
Offset Values
------ ------
0x0090: 00 00 01 a0 4d 65 6c 6c 00 00 00 00
$
$ ethtool -m enp65s0f0np0
Offset Values
------ ------
0x0000: 11 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 00
0x0070: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
patched driver:
$ ethtool -m enp65s0f0np0 offset 0x90 length 8
Offset Values
------ ------
0x0090: 00 00 01 a0 4d 65 6c 6c
$ ethtool -m enp65s0f0np0 offset 0x90 length 12
Offset Values
------ ------
0x0090: 00 00 01 a0 4d 65 6c 6c 61 6e 6f 78
$ ethtool -m enp65s0f0np0
Identifier : 0x11 (QSFP28)
Extended identifier : 0x00
Extended identifier description : 1.5W max. Power consumption
Extended identifier description : No CDR in TX, No CDR in RX
Extended identifier description : High Power Class (> 3.5 W) not enabled
Connector : 0x23 (No separable connector)
Transceiver codes : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Transceiver type : 40G Ethernet: 40G Base-CR4
Transceiver type : 25G Ethernet: 25G Base-CR CA-N
Encoding : 0x05 (64B/66B)
BR, Nominal : 25500Mbps
Rate identifier : 0x00
Length (SMF,km) : 0km
Length (OM3 50um) : 0m
Length (OM2 50um) : 0m
Length (OM1 62.5um) : 0m
Length (Copper or Active cable) : 1m
Transmitter technology : 0xa0 (Copper cable unequalized)
Attenuation at 2.5GHz : 4db
Attenuation at 5.0GHz : 5db
Attenuation at 7.0GHz : 7db
Attenuation at 12.9GHz : 10db
........
.... |
