| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/cdx: Serialize VFIO_DEVICE_SET_IRQS with a per-device mutex
vfio_cdx_set_msi_trigger() reads vdev->config_msi and operates on the
vdev->cdx_irqs array based on its value, but provides no serialization
against concurrent VFIO_DEVICE_SET_IRQS ioctls. Two callers can race
such that one observes config_msi as set while another clears it and
frees cdx_irqs via vfio_cdx_msi_disable(), resulting in a use-after-free
of the cdx_irqs array.
Add a cdx_irqs_lock mutex to struct vfio_cdx_device and acquire it in
vfio_cdx_set_msi_trigger(), which is the single chokepoint through
which all updates to config_msi, cdx_irqs, and msi_count flow, covering
both the ioctl path and the close-device cleanup path. This keeps the
test of config_msi atomic with the subsequent enable, disable, or
trigger operations.
Drop the pre-call !cdx_irqs test from vfio_cdx_irqs_cleanup() as part
of this change: the optimization it provided is redundant with the
!config_msi early-return inside vfio_cdx_msi_disable(), and leaving the
test in place would be an unsynchronized read of state the new lock is
meant to protect. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: validate reply type before using icmp_pointers
Extended echo replies use ICMP_EXT_ECHOREPLY as the outbound reply type.
That value is outside the range covered by icmp_pointers[], which only
describes the traditional ICMP types up to NR_ICMP_TYPES.
Avoid consulting icmp_pointers[] for reply types outside that range, and
use array_index_nospec() for the remaining in-range lookup. Normal ICMP
replies keep their existing behavior unchanged. |
| PostgreSQL Anonymizer contains a vulnerability that allows a user to gain superuser privileges by creating a JSON document and placing malicious code inside a particular key-value pair. If a superuser calls the import_database_rules() or import_roles_rules() functions, the malicious code is executed with superuser privileges. The problem is resolved in PostgreSQL Anonymizer 3.1.1 and further versions |
| Firefox for iOS preserved cookies set on the initial PDF request across cross-origin HTTP redirects in TemporaryDocument, allowing a malicious site to inject arbitrary cookies into requests to an unrelated target domain. This vulnerability was fixed in Firefox for iOS 152.0. |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in elixir-grpc grpc (GRPC.Compressor.Gzip, GRPC.Message modules) allows a denial of service via a gzip decompression bomb.
This vulnerability is associated with program files lib/grpc/compressor/gzip.ex, lib/grpc/message.ex and program routines 'Elixir.GRPC.Compressor.Gzip':decompress/1, 'Elixir.GRPC.Message':from_data/2.
'Elixir.GRPC.Compressor.Gzip':decompress/1 calls :zlib.gunzip/1 directly on attacker-controlled bytes with no decompressed-size limit, ratio check, or incremental decoding. Because this module is the registered gzip GRPC.Compressor implementation, it is invoked automatically whenever an incoming gRPC frame carries the grpc-encoding: gzip header. :zlib.gunzip/1 allocates the entire decompressed result as a single binary, so a small highly compressible payload (for example a few kilobytes of zeros, which gzip compresses at roughly 1000:1) expands to multiple gigabytes inside a single call. The max_receive_message_length limit is enforced only against the already-decompressed message, so it provides no protection. An unauthenticated remote peer can send a single crafted frame to exhaust the BEAM node's heap and trigger an out-of-memory kill.
This issue affects grpc: from 0.4.0 before 1.0.0. |
| Allocation of Resources Without Limits or Throttling vulnerability in elixir-grpc grpc allows unauthenticated attackers to exhaust the BEAM's memory and crash the server by streaming a large or slow-trickle unary request body.
'Elixir.GRPC.Server.Adapters.Cowboy.Handler':read_full_body/3 (lib/grpc/server/adapters/cowboy/handler.ex) accumulates every received chunk into a single growing binary with no size cap. Additionally, when the client omits the grpc-timeout header, the per-chunk read timeout resolves to :infinity, allowing a slow-trickle client to keep the connection alive indefinitely while memory grows. A single connection is sufficient to exhaust server memory and crash the node.
This issue affects grpc from 0.3.1 before 1.0.0. |
| Deserialization of Untrusted Data and Allocation of Resources Without Limits or Throttling vulnerabilities in elixir-grpc grpc allow unauthenticated attackers to crash the BEAM node via atom table exhaustion and, when a decoded term flows into a call site that invokes it, achieve remote code execution on the server.
'Elixir.GRPC.Codec.Erlpack':decode/2 (lib/grpc/codec/erlpack.ex) calls :erlang.binary_to_term/1 on the raw gRPC message body without the :safe option, no size bound, and no type guard. Any unauthenticated peer that sends a request with Content-Type: application/grpc+erlpack can send a crafted payload that mints arbitrary new atoms (which are never garbage-collected, exhausting the bounded atom table and crashing the VM) or that encodes a fun term which, if applied anywhere downstream, executes attacker-controlled code inside the server process.
This issue affects grpc from 0.4.0 before 1.0.0. |
| Authorization Bypass Through User-Controlled Key vulnerability in elixir-grpc grpc allows authenticated attackers to access or modify resources belonging to other users by smuggling a conflicting value for any path-bound field via the query string or request body.
In 'Elixir.GRPC.Server.Transcode':map_request/5 (lib/grpc/server/transcode.ex), all three clauses use Map.merge/2 with path bindings as the first argument, giving them the lowest merge precedence. A request such as GET /users/me/profile?user_id=victim (or a POST with {"user_id": "victim"} when body: "*") yields a decoded protobuf struct where the path-bound field carries the attacker-supplied value rather than the router-extracted value. Any handler that uses the path-bound field for authorization, multi-tenancy scoping, or ownership checks is silently bypassed.
This issue affects grpc from 0.8.0 before 1.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: ns: Free the node during ctrl_cmd_bye()
A node sends the BYE packet when it is about to go down. So the nameserver
should advertise the removal of the node to all remote and local observers
and free the node finally. But currently, the nameserver doesn't free the
node memory even after processing the BYE packet. This causes the node
memory to leak.
Hence, remove the node from Xarray list and free the node memory during
both success and failure case of ctrl_cmd_bye(). |
| In the Linux kernel, the following vulnerability has been resolved:
rxgk: Fix potential integer overflow in length check
Fix potential integer overflow in rxgk_extract_token() when checking the
length of the ticket. Rather than rounding up the value to be tested
(which might overflow), round down the size of the available data. |
| In the Linux kernel, the following vulnerability has been resolved:
inotify: fix watch count leak when fsnotify_add_inode_mark_locked() fails
When fsnotify_add_inode_mark_locked() fails in inotify_new_watch(),
the error path calls inotify_remove_from_idr() but does not call
dec_inotify_watches() to undo the preceding inc_inotify_watches().
This leaks a watch count, and repeated failures can exhaust the
max_user_watches limit with -ENOSPC even when no watches are active.
Prior to commit 1cce1eea0aff ("inotify: Convert to using per-namespace
limits"), the watch count was incremented after fsnotify_add_mark_locked()
succeeded, so this path was not affected. The conversion moved
inc_inotify_watches() before the mark insertion without adding the
corresponding rollback.
Add the missing dec_inotify_watches() call in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: fix memory leaks in weighted_interleave_auto_store()
weighted_interleave_auto_store() fetches old_wi_state inside the if
(!input) block only. This causes two memory leaks:
1. When a user writes "false" and the current mode is already manual,
the function returns early without freeing the freshly allocated
new_wi_state.
2. When a user writes "true", old_wi_state stays NULL because the
fetch is skipped entirely. The old state is then overwritten by
rcu_assign_pointer() but never freed, since the cleanup path is
gated on old_wi_state being non-NULL. A user can trigger this
repeatedly by writing "1" in a loop.
Fix both leaks by moving the old_wi_state fetch before the input check,
making it unconditional. This also allows a unified early return for both
"true" and "false" when the requested mode matches the current mode.
Reviewed by: Donet Tom <donettom@linux.ibm.com> |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv
rxe_rcv() currently checks only that the incoming packet is at least
header_size(pkt) bytes long before payload_size() is used.
However, payload_size() subtracts both the attacker-controlled BTH pad
field and RXE_ICRC_SIZE from pkt->paylen:
payload_size = pkt->paylen - offset[RXE_PAYLOAD] - bth_pad(pkt)
- RXE_ICRC_SIZE
This means a short packet can still make payload_size() underflow even
if it includes enough bytes for the fixed headers. Simply requiring
header_size(pkt) + RXE_ICRC_SIZE is not sufficient either, because a
packet with a forged non-zero BTH pad can still leave payload_size()
negative and pass an underflowed value to later receive-path users.
Fix this by validating pkt->paylen against the full minimum length
required by payload_size(): header_size(pkt) + bth_pad(pkt) +
RXE_ICRC_SIZE. |
| Subscriber Broken Access Control in Ultra Addons for WPForms <= 1.0.11 versions. |
| Discuz! X5.0 releases 20260320 through 20260610 contain a local file inclusion vulnerability that allows authenticated administrators to execute arbitrary code by importing a specially crafted plugin configuration containing path traversal sequences in the directory attribute. Attackers can trigger an exception during plugin installation to bypass sanitization routines, causing malicious paths to be stored unsanitized and subsequently passed to include(), which combined with file upload functionality escalates to arbitrary code execution in the context of the web server user. |
| Subscriber SQL Injection in MasterStudy LMS <= 3.7.25 versions. |
| Subscriber Cross Site Scripting (XSS) in WP Job Portal <= 2.5.2 versions. |
| A lack of authorization validation in version 0.4.17 or later of the ChromaDB Python project allows any authenticated users to arbitrarily read, write, update, or delete data in any tenant's collection regardless of which tenant they belong to. |
| The SimpleRBACAuthorizationProvider authorization provider in versions 0.5.0 or later of the ChromaDB Python project evaluates whether a user holds a given permission but never checks which tenant, database, or collection that permission applies to allowing users to perform cross tenant actions. |
| All V1 collection-level endpoints in ChromaDB's Python project pass None for the tenant and database to the authorization layer, allowing attackers to bypass authorization controls by using the V1 endpoints. |
