| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: fix undefined behavior in bit shift for TTM_TT_FLAG_PRIV_POPULATED
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in ./include/drm/ttm/ttm_tt.h:122:26
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
ttm_bo_move_memcpy+0x3b4/0x460 [ttm]
bo_driver_move+0x32/0x40 [drm_vram_helper]
ttm_bo_handle_move_mem+0x118/0x200 [ttm]
ttm_bo_validate+0xfa/0x220 [ttm]
drm_gem_vram_pin_locked+0x70/0x1b0 [drm_vram_helper]
drm_gem_vram_pin+0x48/0xb0 [drm_vram_helper]
drm_gem_vram_plane_helper_prepare_fb+0x53/0xe0 [drm_vram_helper]
drm_gem_vram_simple_display_pipe_prepare_fb+0x26/0x30 [drm_vram_helper]
drm_simple_kms_plane_prepare_fb+0x4d/0xe0 [drm_kms_helper]
drm_atomic_helper_prepare_planes+0xda/0x210 [drm_kms_helper]
drm_atomic_helper_commit+0xc3/0x1e0 [drm_kms_helper]
drm_atomic_commit+0x9c/0x160 [drm]
drm_client_modeset_commit_atomic+0x33a/0x380 [drm]
drm_client_modeset_commit_locked+0x77/0x220 [drm]
drm_client_modeset_commit+0x31/0x60 [drm]
__drm_fb_helper_restore_fbdev_mode_unlocked+0xa7/0x170 [drm_kms_helper]
drm_fb_helper_set_par+0x51/0x90 [drm_kms_helper]
fbcon_init+0x316/0x790
visual_init+0x113/0x1d0
do_bind_con_driver+0x2a3/0x5c0
do_take_over_console+0xa9/0x270
do_fbcon_takeover+0xa1/0x170
do_fb_registered+0x2a8/0x340
fbcon_fb_registered+0x47/0xe0
register_framebuffer+0x294/0x4a0
__drm_fb_helper_initial_config_and_unlock+0x43c/0x880 [drm_kms_helper]
drm_fb_helper_initial_config+0x52/0x80 [drm_kms_helper]
drm_fbdev_client_hotplug+0x156/0x1b0 [drm_kms_helper]
drm_fbdev_generic_setup+0xfc/0x290 [drm_kms_helper]
bochs_pci_probe+0x6ca/0x772 [bochs]
local_pci_probe+0x4d/0xb0
pci_device_probe+0x119/0x320
really_probe+0x181/0x550
__driver_probe_device+0xc6/0x220
driver_probe_device+0x32/0x100
__driver_attach+0x195/0x200
bus_for_each_dev+0xbb/0x120
driver_attach+0x27/0x30
bus_add_driver+0x22e/0x2f0
driver_register+0xa9/0x190
__pci_register_driver+0x90/0xa0
bochs_pci_driver_init+0x52/0x1000 [bochs]
do_one_initcall+0x76/0x430
do_init_module+0x61/0x28a
load_module+0x1f82/0x2e50
__do_sys_finit_module+0xf8/0x190
__x64_sys_finit_module+0x23/0x30
do_syscall_64+0x58/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8183: fix refcount leak in mt8183_mt6358_ts3a227_max98357_dev_probe()
The node returned by of_parse_phandle() with refcount incremented,
of_node_put() needs be called when finish using it. So add it in the
error path in mt8183_mt6358_ts3a227_max98357_dev_probe(). |
| Client-side template injection (CSTI) in Azuriom CMS admin dashboard allows a low-privilege user to execute arbitrary template code in the context of an administrator's session. This can occur via plugins or dashboard components that render untrusted user input, potentially enabling privilege escalation to an administrative account. Fixed in Azuriom 1.2.7. |
| The Accordion Slider plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘html’ attribute of an accordion slider in all versions up to, and including, 1.9.11 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. NOTE: Successful exploitation by Contributor-level users requires an Administrator-level user to provide access to the plugin's admin area via the `Access` plugin setting, which is restricted to administrators by default. |
| Multiple Incorrect Access Control vulnerabilities in adata Software GmbH Mitarbeiterportal 2.15.2.0 allow remote authenticated, low-privileged users to carry out administrative functions and manipulate data of other users via unauthorized API calls. |
| A vulnerability was determined in CmsEasy up to 7.7.7. This affects an unknown function in the library lib/inc/view.php of the component URL Handler. Executing manipulation of the argument PHP_SELF can lead to cross site scripting. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A buffer overflow in the Mercury MR816v2 (081C3114 4.8.7 Build 110427 Rel 36550n) occurs when the device accepts and stores excessively long hostnames from LAN hosts without proper length validation. The affected code performs unchecked copies/concatenations into fixed-size buffers. A crafted long hostname can overflow the buffer, cause a crash (DoS) and potentially enabling remote code execution. |
| A stored Cross site scripting (XSS) vulnerability in the Mercury MR816v2 (081C3114 4.8.7 Build 110427 Rel 36550n) router allows a remote attacker on the LAN to inject JavaScript into the router's management UI by submitting a malicious hostname. The injected script is stored and later executed in the context of an administrator's browser (for example after DHCP release/renew triggers the interface to display the stored hostname). Because the management interface uses weak/basic authentication and does not properly protect or isolate session material, the XSS can be used to exfiltrate the admin session and perform administrative actions. |
| Interactive service agent in OpenVPN version 2.5.0 through 2.6.16 and 2.7_alpha1 through 2.7_rc2 on Windows allows a local authenticated user to connect to the service and trigger an error causing a local denial of service. |
| Improper validation of source IP addresses in OpenVPN version 2.6.0 through 2.6.15 and 2.7_alpha1 through 2.7_rc1 allows an attacker to open a session from a different IP address which did not initiate the connection resulting in a denial of service for the originating client |
| Stored cross site scripting (xss) vulnerability in SWISH prolog thru 2.2.0 allowing attackers to execute arbitrary code via crafted web IDE notebook. |
| Unrestricted Upload of File with Dangerous Type vulnerability in vcita Online Booking & Scheduling Calendar for WordPress by vcita allows Using Malicious Files. This issue affects Online Booking & Scheduling Calendar for WordPress by vcita: from n/a through 4.5.3. |
| GeoServer is an open source server that allows users to share and edit geospatial data. From version 2.26.0 to before 2.26.2 and before 2.25.6, an XML External Entity (XXE) vulnerability was identified. The application accepts XML input through a specific endpoint /geoserver/wms operation GetMap. However, this input is not sufficiently sanitized or restricted, allowing an attacker to define external entities within the XML request. This issue has been patched in GeoServer 2.25.6, GeoServer 2.26.3, and GeoServer 2.27.0. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in vcita Online Booking & Scheduling Calendar for WordPress by vcita allows Stored XSS. This issue affects Online Booking & Scheduling Calendar for WordPress by vcita: from n/a through 4.5.3. |
| A vulnerability was found in Red Hat OpenShift Jenkins. The bearer token is not obfuscated in the logs and potentially carries a high risk if those logs are centralized when collected. The token is typically valid for one year. This flaw allows a malicious user to jeopardize the environment if they have access to sensitive information. |
| Mastodon is a free, open-source social network server based on ActivityPub. In Mastodon version 4.4, support for verifiable quote posts with quote controls was added, but it is possible for an attacker to bypass these controls in Mastodon versions prior to 4.4.8 and 4.5.0-beta.2. Mastodon internally treats reblogs as statuses. Since they were not special-treated, an attacker could reblog any post, then quote their reblog, technically quoting themselves, but having the quote feature a preview of the post they did not get authorization for with all of the affordances that would be otherwise denied by the quote controls. This issue has been patched in versions 4.4.8 and 4.5.0-beta.2. |
| Null pointer dereference in add_ca_certs() in Cesanta Mongoose before 7.2 allows remote attackers to cause a denial of service via TLS initialization where SSL_CTX_get_cert_store() returns NULL. |
| An issue was discovered in 5.2 before 5.2.9, 5.1 before 5.1.15, and 4.2 before 4.2.27.
`FilteredRelation` is subject to SQL injection in column aliases, using a suitably crafted dictionary, with dictionary expansion, as the `**kwargs` passed to `QuerySet.annotate()` or `QuerySet.alias()` on PostgreSQL.
Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected.
Django would like to thank Stackered for reporting this issue. |
| zdh_web is a data collection, processing, monitoring, scheduling, and management platform. In zdh_web thru 5.6.17, insufficient validation of file upload paths in the application allows an authenticated user to write arbitrary files to the server file system, potentially overwriting existing files and leading to privilege escalation or remote code execution. |
| The warehouse management system version 1.2 contains an arbitrary file read vulnerability. The endpoint `/file/showImageByPath` does not sanitize user-controlled path parameters. An attacker could exploit directory traversal to read arbitrary files on the server's file system. This could lead to the leakage of sensitive system information. |
