| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference in compare_guid_key()
session_fd_check() walks the per-inode m_op_list during durable-handle
session teardown and sets op->conn = NULL for every opinfo whose conn
matched the closing session's connection. The matching opinfo, however,
stays linked in its per-ClientGuid lease_table_list entry's lb->lease_list
because destroy_lease_table() only runs on full TCP-connection teardown,
not on SESSION_LOGOFF.
If the same TCP connection then negotiates a fresh session with the
same ClientGuid (ClientGuid is bound to NEGOTIATE, not the session, and
is unchanged across LOGOFF + SETUP) and issues a SMB2 CREATE with a
lease context on a different inode, find_same_lease_key() walks
lb->lease_list, reaches the stale opinfo, and calls compare_guid_key(),
which unconditionally dereferences opinfo->conn->ClientGUID. The conn
pointer is NULL and the kernel panics.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d194:
general protection fault, probably for non-canonical address
0xdffffc0000000069: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000348-0x000000000000034f]
Workqueue: ksmbd-io handle_ksmbd_work
RIP: 0010:bcmp+0x5b/0x230
Call Trace:
compare_guid_key+0x4b/0xd0
find_same_lease_key+0x324/0x690
smb2_open+0x6aea/0x8e60
handle_ksmbd_work+0x796/0xee0
...
Faulting address 0x348 is the offset of ClientGUID within struct
ksmbd_conn, confirming opinfo->conn was NULL.
Read opinfo->conn once and bail out if it has been cleared by a
concurrent session_fd_check(). A half-detached opinfo cannot be the
owner of an active lease, so returning 0 is the correct match result. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix null pointer dereference in proc_show_files()
When a SMB2 client opens a file with a durable v2 handle and then issues
SMB2 SESSION_LOGOFF, session_fd_check() clears fp->tcon = NULL on the
reconnectable file pointer but leaves the fp registered in global_ft.idr
until the durable scavenger fires (up to fp->durable_timeout seconds
later).
During that window any read of /proc/fs/ksmbd/files (mode 0400) panics
the kernel because proc_show_files() walks global_ft.idr and
unconditionally dereferences fp->tcon->id with no NULL guard.
Reproducer requires only a successful SMB2 SESSION_SETUP and a share
configured with 'durable handles = yes'. KASAN report on mainline
70390501d194:
general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:proc_show_files+0x118/0x740
Call Trace:
proc_show_files+0x118/0x740
seq_read_iter+0x4ef/0xe10
proc_reg_read_iter+0x1b7/0x280
...
Guard the dereference. A durable-disconnected fp legitimately has no
tcon; report its tree id as 0 rather than oopsing. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix SID memory leak in set_posix_acl_entries_dacl() on overflow
Commit 299f962c0b02 ("ksmbd: use check_add_overflow() to prevent u16
DACL size overflow") added check_add_overflow() guards that break out
of the ACE-building loops in set_posix_acl_entries_dacl() when the
accumulated DACL size would wrap past 65535.
However, each iteration allocates a struct smb_sid via kmalloc_obj()
at the top of the loop and relies on the kfree(sid) call at the end
of the loop body (the 'pass_same_sid' label in the first loop, and
the explicit kfree at the tail of the second loop) to release it.
The newly introduced 'break' statements bypass those kfree() calls,
leaking the sid buffer every time an overflow is detected.
A malicious or malformed file with enough POSIX ACL entries to trip
the overflow check will leak one or more struct smb_sid allocations
on every request that touches the file's DACL, providing a trivial
kernel memory exhaustion vector.
Free sid before breaking out of the loops to plug the leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate SID in parent security descriptor during ACL inheritance
Introduce smb_validate_ntsd_sid() helper to safely validate Owner SID
and Group SID inside the NT Security Descriptor (smb_ntsd) retrieved
from the parent directory. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: require net admin for CIFS SWN netlink
CIFS_GENL_CMD_SWN_NOTIFY is the userspace witness-notify command. The
intended sender is the cifs.witness helper, but the generic-netlink
operation currently has no capability flag, so any local process can send
RESOURCE_CHANGE or CLIENT_MOVE notifications to the in-kernel witness
handler.
The same family exposes CIFS_GENL_MCGRP_SWN without multicast-group
capability flags. Register messages sent to that group include the witness
registration id and, for NTLM-authenticated mounts, the username, domain,
and password attributes copied from the CIFS session. An unprivileged
local process should not be able to join that group and receive those
messages.
Require CAP_NET_ADMIN for incoming SWN_NOTIFY commands with
GENL_ADMIN_PERM, and require CAP_NET_ADMIN over the network namespace for
joining the SWN multicast group with GENL_MCAST_CAP_NET_ADMIN. The
cifs.witness service runs with the privileges needed for both operations. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: protect tc_count increment in smb2_find_smb_sess_tcon_unlocked()
Commit 96c4af418586 ("cifs: Fix locking usage for tcon fields")
refactored cifs code to change cifs_tcp_ses_lock for tc_lock around
tc_count changes.
There was missing lock around tc_count increment inside
smb2_find_smb_sess_tcon_unlocked(). |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) widen blackbox-info buffer to I2C_SMBUS_BLOCK_MAX
adm1266_nvmem_read_blackbox() declares a 5-byte stack buffer and
passes it to i2c_smbus_read_block_data() to retrieve the 4-byte
BLACKBOX_INFO response. i2c_smbus_read_block_data() does not honour
caller buffer sizes -- it memcpy()s data.block[0] bytes from the
SMBus transaction (where data.block[0] is the length byte returned by
the slave device, up to I2C_SMBUS_BLOCK_MAX = 32):
memcpy(values, &data.block[1], data.block[0]);
If the device returns any block length above 5, the call overflows
the caller's 5-byte stack buffer before the post-call
if (ret != 4)
return -EIO;
check has a chance to reject the response.
Widen the local buffer to I2C_SMBUS_BLOCK_MAX so the helper has room
for any well-formed SMBus block response, matching the convention used
by the other i2c_smbus_read_block_data() callers in this driver. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: Don't setup bogus iov_iter for silencing
At transition to the iov_iter for PCM data transfer, we blindly
applied the iov_iter setup also for silencing (i.e. data = NULL), and
it leads to a calculation of bogus iov_iter. Fortunately this didn't
cause troubles on most of architectures but it goes wrong on RISC-V
now, causing a NULL dereference.
Handle the NULL data case to treat the silencing in interleaved_copy()
for addressing the bug above. noninterleaved_copy() has already the
NULL data handling, so it doesn't need changes. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: asihpi: Fix potential OOB array access at reading cache
find_control() to retrieve a cached info accesses the array with the
given index blindly, which may lead to an OOB array access.
Add a sanity check for avoiding it. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: refresh hdr pointer before ioam6_event()
Reported by Sashiko:
In ipv6_hop_ioam(), the hdr pointer is initialized to point into the
skb's linear data buffer. Later, the code calls skb_ensure_writable(),
which might reallocate the buffer:
if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len))
goto drop;
/* Trace pointer may have changed */
trace = (struct ioam6_trace_hdr *)(skb_network_header(skb)
+ optoff + sizeof(*hdr));
ioam6_fill_trace_data(skb, ns, trace, true);
ioam6_event(IOAM6_EVENT_TRACE, dev_net(skb->dev),
GFP_ATOMIC, (void *)trace, hdr->opt_len - 2);
If the skb is cloned or lacks sufficient linear headroom,
skb_ensure_writable() will invoke pskb_expand_head(), which reallocates
the skb's data buffer and frees the old one, invalidating pointers to
it. While the code recalculates the trace pointer immediately after the
call to skb_ensure_writable(), it fails to recalculate the hdr pointer.
This patch fixes the above by recalculating the hdr pointer before
passing hdr->opt_len to ioam6_event(), so that we avoid any UaF. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memory: fix spurious warning when unmapping device-private/exclusive pages
Device private and exclusive entries are only supported for anonymous
folios. This condition is tested in __migrate_device_pages() and
make_device_exclusive() using folio_test_anon(). However the unmap path
tests this assumption using vma_is_anonymous().
This is wrong because whilst anonymous VMAs can only contain folios where
folio_test_anon() is true the opposite relation does not hold. A folio
for which folio_test_anon() is true does not imply vma_is_anonymous() is
true. Such a condition can occur if for example a folio is part of a
private filebacked mapping.
In this case vma_is_anonymous() is false as the mapping is filebacked, but
folio_test_anon() may be true, thus permitting devices to migrate the
folio to device private memory. This can lead to the following spurious
warnings during process teardown:
[ 772.737706] ------------[ cut here ]------------
[ 772.739201] WARNING: mm/memory.c:1754 at unmap_page_range.cold+0x26/0x18a, CPU#17: hmm-tests/2041
[ 772.742050] Modules linked in: test_hmm nvidia_uvm(O) nvidia(O)
[ 772.743959] CPU: 17 UID: 0 PID: 2041 Comm: hmm-tests Tainted: G W O 7.0.0+ #387 PREEMPT(full)
[ 772.747104] Tainted: [W]=WARN, [O]=OOT_MODULE
[ 772.748509] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[ 772.752117] RIP: 0010:unmap_page_range.cold+0x26/0x18a
[ 772.753780] Code: 7e fe ff ff 48 89 4c 24 78 4c 89 44 24 38 e8 f2 ff b1 00 48 8b 4c 24 78 4c 8b 44 24 38 48 8b 44 24 18 48 83 78 48 00 74 04 90 <0f> 0b 90 48 89 ca b8 ff ff 37 00 48 c1 ea 03 48 c1 e0 2a 80 3c 02
[ 772.759602] RSP: 0018:ffff888112607550 EFLAGS: 00010286
[ 772.761310] RAX: ffff88811bbf4dc0 RBX: dffffc0000000000 RCX: ffffea03e9bfffd8
[ 772.763583] RDX: 1ffff1102377e9c1 RSI: 0000000000000008 RDI: ffff88811bbf4e08
[ 772.765914] RBP: 0000000000000006 R08: ffff8881059f7448 R09: ffffed10224c0e68
[ 772.768184] R10: ffff888112607347 R11: 0000000000000001 R12: 0000000000000001
[ 772.770461] R13: ffffea03e9bfffc0 R14: ffff888112607908 R15: ffffea03e9bfffc0
[ 772.772782] FS: 00007f327caa2780(0000) GS:ffff888427b7d000(0000) knlGS:0000000000000000
[ 772.775328] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 772.777187] CR2: 00007f327ca89000 CR3: 00000001994d5000 CR4: 00000000000006f0
[ 772.779135] Call Trace:
[ 772.779792] <TASK>
[ 772.780317] ? dmirror_interval_invalidate+0x1a3/0x290 [test_hmm]
[ 772.781873] ? vm_normal_page_pud+0x2b0/0x2b0
[ 772.782992] ? __rwlock_init+0x150/0x150
[ 772.784006] ? lock_release+0x216/0x2b0
[ 772.785008] ? __mmu_notifier_invalidate_range_start+0x505/0x6e0
[ 772.786522] ? lock_release+0x216/0x2b0
[ 772.787498] ? unmap_single_vma+0xb6/0x210
[ 772.788573] unmap_vmas+0x27d/0x520
[ 772.789506] ? unmap_single_vma+0x210/0x210
[ 772.790607] ? mas_update_gap.part.0+0x620/0x620
[ 772.791834] unmap_region+0x19e/0x350
[ 772.792769] ? remove_vma+0x130/0x130
[ 772.793684] ? mas_alloc_nodes+0x1f2/0x300
[ 772.794730] vms_complete_munmap_vmas+0x8c1/0xe20
[ 772.795926] ? unmap_region+0x350/0x350
[ 772.796917] do_vmi_align_munmap+0x36a/0x4e0
[ 772.798018] ? lock_release+0x216/0x2b0
[ 772.799024] ? vma_shrink+0x620/0x620
[ 772.799983] do_vmi_munmap+0x150/0x2c0
[ 772.800939] __vm_munmap+0x161/0x2c0
[ 772.801872] ? expand_downwards+0xd60/0xd60
[ 772.802948] ? clockevents_program_event+0x1ef/0x540
[ 772.804217] ? lock_release+0x216/0x2b0
[ 772.805158] __x64_sys_munmap+0x59/0x80
[ 772.805776] do_syscall_64+0xfc/0x670
[ 772.806336] ? irqentry_exit+0xda/0x580
[ 772.806976] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 772.807772] RIP: 0033:0x7f327cbb2717
[ 772.808323] Code: 73 01 c3 48 8b 0d f9 76 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 0b 00 00 00 0f 05 <48> 3d 01 f0 ff
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
mm/page_alloc: fix initialization of tags of the huge zero folio with init_on_free
__GFP_ZEROTAGS semantics are currently a bit weird, but effectively this
flag is only ever set alongside __GFP_ZERO and __GFP_SKIP_KASAN.
If we run with init_on_free, we will zero out pages during
__free_pages_prepare(), to skip zeroing on the allocation path.
However, when allocating with __GFP_ZEROTAG set, post_alloc_hook() will
consequently not only skip clearing page content, but also skip clearing
tag memory.
Not clearing tags through __GFP_ZEROTAGS is irrelevant for most pages that
will get mapped to user space through set_pte_at() later: set_pte_at() and
friends will detect that the tags have not been initialized yet
(PG_mte_tagged not set), and initialize them.
However, for the huge zero folio, which will be mapped through a PMD
marked as special, this initialization will not be performed, ending up
exposing whatever tags were still set for the pages.
The docs (Documentation/arch/arm64/memory-tagging-extension.rst) state
that allocation tags are set to 0 when a page is first mapped to user
space. That no longer holds with the huge zero folio when init_on_free is
enabled.
Fix it by decoupling __GFP_ZEROTAGS from __GFP_ZERO, passing to
tag_clear_highpages() whether we want to also clear page content.
Invert the meaning of the tag_clear_highpages() return value to have
clearer semantics.
Reproduced with the huge zero folio by modifying the check_buffer_fill
arm64/mte selftest to use a 2 MiB area, after making sure that pages have
a non-0 tag set when freeing (note that, during boot, we will not actually
initialize tags, but only set KASAN_TAG_KERNEL in the page flags).
$ ./check_buffer_fill
1..20
...
not ok 17 Check initial tags with private mapping, sync error mode and mmap memory
not ok 18 Check initial tags with private mapping, sync error mode and mmap/mprotect memory
...
This code needs more cleanups; we'll tackle that next, like
decoupling __GFP_ZEROTAGS from __GFP_SKIP_KASAN.
[akpm@linux-foundation.org: s/__GPF_ZERO/__GFP_ZERO/, per David] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/migrate_device: fix spinlock leak in migrate_vma_insert_huge_pmd_page
When check_stable_address_space() fails after the PMD spinlock has
been acquired via pmd_lock(), the code jumps directly to the abort
label, bypassing the spin_unlock() call in unlock_abort. This causes
the PMD spinlock to be permanently held, leading to a deadlock.
Change the goto target from abort to unlock_abort to ensure the
spinlock is always released on this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: drop ISO_END frames received without prior ISO_START
ISO data PDUs carry a packet-boundary flag indicating START, CONT, END
or SINGLE. The ISO_CONT branch of iso_recv() guards against a missing
ISO_START by checking conn->rx_len before touching conn->rx_skb, but
ISO_END does not.
If a peer sends an ISO_END as the first packet on a fresh ISO
connection, conn->rx_skb is still NULL and conn->rx_len is zero, so
skb_put(conn->rx_skb, ...) dereferences NULL and oopses. For BIS,
where receivers sync to a broadcaster without pairing, any broadcaster
on the air can trigger this.
Mirror the ISO_CONT check at the top of ISO_END so a stray end fragment
is logged and dropped instead of crashing the host. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: ecred_reconfigure: send packed pdu, not stack pointer
Commit 1c08108f3014 ("Bluetooth: L2CAP: Avoid -Wflex-array-member-not-at-end
warnings") converted the on-stack request PDU in l2cap_ecred_reconfigure()
from an explicit packed struct to DEFINE_RAW_FLEX(), but did not adjust the
size and source-pointer arguments to l2cap_send_cmd():
- struct {
- struct l2cap_ecred_reconf_req req;
- __le16 scid;
- } pdu;
+ DEFINE_RAW_FLEX(struct l2cap_ecred_reconf_req, pdu, scid, 1);
...
l2cap_send_cmd(conn, chan->ident, L2CAP_ECRED_RECONF_REQ,
sizeof(pdu), &pdu);
After the conversion, DEFINE_RAW_FLEX() expands to declare an anonymous
union pdu_u plus a local pointer "pdu" pointing at it. Therefore:
- sizeof(pdu) is now sizeof(struct l2cap_ecred_reconf_req *) = 8 on
64-bit (4 on 32-bit), not the 6 bytes of (mtu, mps, scid[1]).
- &pdu is the address of the local pointer's stack storage, not the
address of the request payload.
l2cap_send_cmd() forwards (data, count) to l2cap_build_cmd(), which calls
skb_put_data(skb, data, count). The L2CAP_ECRED_RECONFIGURE_REQ packet
body therefore contains 8 bytes copied from the kernel stack starting at
&pdu -- the 8 bytes overlap the pdu pointer's value, leaking a kernel
stack address to the paired Bluetooth peer. The intended (mtu, mps, scid)
fields are not transmitted at all, so the peer rejects the request as
malformed and the L2CAP_ECRED_RECONFIGURE feature itself has been broken
for the local-side initiator since the introducing commit landed.
The sibling site l2cap_ecred_conn_req() in the same commit was converted
correctly (sizeof(*pdu) + len, pdu); only this site was missed.
Restore the original semantics: pass the full flex-struct size via
struct_size(pdu, scid, 1) and the pdu pointer (the struct address) as
the source.
Validated on a stock 7.0-based host kernel via the real call path:
setsockopt(SOL_BLUETOOTH, BT_RCVMTU, ...) on a BT_CONNECTED
L2CAP_MODE_EXT_FLOWCTL socket emits an L2CAP_ECRED_RECONFIGURE_REQ
whose body is 8 bytes (the on-stack pdu local's value) rather than
the expected 6. Three captures from fresh socket / fresh hciemu peer
on the same host -- low bytes vary per call, high 0xffff confirms a
kernel virtual address (KASLR-randomised stack slot, not a fixed
string):
RECONF_REQ body (ident=0x02 len=8): 42 fb 54 af 0e ca ff ff
RECONF_REQ body (ident=0x02 len=8): 52 3d 2e af 0e ca ff ff
RECONF_REQ body (ident=0x02 len=8): b2 fc 5b af 0e ca ff ff
After this patch the body is 6 bytes carrying the expected
little-endian (mtu, mps, scid). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate Add Extended Advertising Data length
MGMT_OP_ADD_EXT_ADV_DATA is registered as a variable-length command,
with MGMT_ADD_EXT_ADV_DATA_SIZE as the fixed header size. The handler
then uses cp->adv_data_len and cp->scan_rsp_len to validate and copy
cp->data, but it never checks that those bytes are part of the mgmt
command payload.
A short command can therefore make add_ext_adv_data() pass an
out-of-bounds pointer into tlv_data_is_valid(). If the bytes beyond
the command buffer are addressable, they can also be copied into the
advertising instance as scan response data, where the caller can read
them back via MGMT_OP_GET_ADV_INSTANCE. The trigger requires
CAP_NET_ADMIN in the initial user namespace; KASAN reports an 8-byte
slab-out-of-bounds read.
Reject commands whose length does not match the fixed header plus both
advertising data lengths before parsing cp->data. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: keep RBUF EEE/PM disabled
Setting RBUF_EEE_EN | RBUF_PM_EN in RBUF_ENERGY_CTRL breaks the RX
path on GENET hardware once MAC EEE becomes active. RX traffic stops
flowing while the link stays up and the usual descriptor/RX error
counters remain quiet. In that state the MAC still accepts frames
(rbuf_ovflow_cnt keeps climbing) but RBUF no longer forwards them to
DMA, so rx_packets is no longer incremented at the netdev level. On
some boards the corruption ends up as a paging fault in
skb_release_data via bcmgenet_rx_poll on an LPI exit.
Reproduced on Pi 4B (BCM2711 + BCM54213PE) and confirmed by Florian
Fainelli on an internal Broadcom 4908-family board with the same crash
signature. RBUF_PM_EN is not publicly documented.
This shows up more often now that phy_support_eee() enables EEE by
default, but it also affects older kernels as soon as TX LPI is
turned on via ethtool, so it is not specific to recent changes.
Always clear RBUF_EEE_EN | RBUF_PM_EN in bcmgenet_eee_enable_set so
the bits stay off across resets. UMAC and TBUF setup is left alone so
TX-side EEE keeps working. |
| In the Linux kernel, the following vulnerability has been resolved:
net: devmem: reject dma-buf bind with non-page-aligned size or SG length
net_devmem_bind_dmabuf() trusts dmabuf->size and sg_dma_len() to be
PAGE_SIZE multiples without checking:
- tx_vec is sized dmabuf->size / PAGE_SIZE, and
net_devmem_get_niov_at() only bounds-checks virt_addr < dmabuf->size
before indexing tx_vec[virt_addr / PAGE_SIZE]. With size =
N*PAGE_SIZE + r (1 <= r < PAGE_SIZE), sendmsg() at iov_base =
N*PAGE_SIZE passes the bound check and reads tx_vec[N] -- one past.
- owner->area.num_niovs = len / PAGE_SIZE while gen_pool_add_owner()
covers the full byte len, so a non-page-multiple non-final sg
desyncs num_niovs from the gen_pool region for every later sg, on
both RX and TX.
dma-buf does not require page-aligned sizes, so the bind path has to
enforce what its own indexing assumes. Reject both with -EINVAL.
The size check is TX-only (only tx_vec is sized off dmabuf->size); the
SG-length check covers both directions. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: defer node table free until after RCU readers
HSR node-list and node-status generic-netlink operations run under
rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and
hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table
with plain list_del() and frees each node immediately.
That lets a generic-netlink reader hold a struct hsr_node pointer across
hsr_dellink(). In a KASAN build, widening the reader window after
hsr_get_next_node() obtains the node reproduces a slab-use-after-free
when the reader copies node->macaddress_A; the freeing stack is
hsr_del_nodes() from hsr_dellink().
Use list_del_rcu() and defer the free through the existing
hsr_free_node_rcu() callback. This matches the lifetime rule used by the
HSR prune paths, which already delete nodes with list_del_rcu() and
call_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix use-after-free in mlx5e_tx_reporter_timeout_recover
mlx5e_tx_reporter_timeout_recover() accesses sq->netdev after
mlx5e_safe_reopen_channels() has torn down and freed the channel (and
its embedded SQs). Replace the three sq->netdev references with
priv->netdev which is safe because priv outlives channel teardown.
The netdev_err() call already used priv->netdev for this reason; make
the trylock/unlock and health_channel_eq_recover calls consistent.
This fixes the following KASAN splat:
BUG: KASAN: use-after-free in mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core]
Read of size 8 at addr ffff889860ed0b28 by task kworker/u113:2/5277
Call Trace:
mlx5e_tx_reporter_timeout_recover+0x1dd/0x360 [mlx5_core]
devlink_health_reporter_recover+0xa2/0x150
devlink_health_report+0x254/0x7c0
mlx5e_reporter_tx_timeout+0x297/0x380 [mlx5_core]
mlx5e_tx_timeout_work+0x109/0x170 [mlx5_core]
process_one_work+0x677/0xf20
worker_thread+0x51f/0xd90
kthread+0x3a5/0x810
ret_from_fork+0x208/0x400
ret_from_fork_asm+0x1a/0x30 |
