| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iwlwifi: Add missing check for alloc_ordered_workqueue
Add check for the return value of alloc_ordered_workqueue since it may
return NULL pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtl818x: Kill URBs before clearing tx status queue
In rtl8187_stop() move the call of usb_kill_anchored_urbs() before clearing
b_tx_status.queue. This change prevents callbacks from using already freed
skb due to anchor was not killed before freeing such skb.
BUG: kernel NULL pointer dereference, address: 0000000000000080
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Not tainted 6.15.0 #8 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
RIP: 0010:ieee80211_tx_status_irqsafe+0x21/0xc0 [mac80211]
Call Trace:
<IRQ>
rtl8187_tx_cb+0x116/0x150 [rtl8187]
__usb_hcd_giveback_urb+0x9d/0x120
usb_giveback_urb_bh+0xbb/0x140
process_one_work+0x19b/0x3c0
bh_worker+0x1a7/0x210
tasklet_action+0x10/0x30
handle_softirqs+0xf0/0x340
__irq_exit_rcu+0xcd/0xf0
common_interrupt+0x85/0xa0
</IRQ>
Tested on RTL8187BvE device.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/tegra: nvdec: Fix dma_alloc_coherent error check
Check for NULL return value with dma_alloc_coherent, in line with
Robin's fix for vic.c in 'drm/tegra: vic: Fix DMA API misuse'. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, ktls: Fix data corruption when using bpf_msg_pop_data() in ktls
When sending plaintext data, we initially calculated the corresponding
ciphertext length. However, if we later reduced the plaintext data length
via socket policy, we failed to recalculate the ciphertext length.
This results in transmitting buffers containing uninitialized data during
ciphertext transmission.
This causes uninitialized bytes to be appended after a complete
"Application Data" packet, leading to errors on the receiving end when
parsing TLS record. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: clip: Fix memory leak of struct clip_vcc.
ioctl(ATMARP_MKIP) allocates struct clip_vcc and set it to
vcc->user_back.
The code assumes that vcc_destroy_socket() passes NULL skb
to vcc->push() when the socket is close()d, and then clip_push()
frees clip_vcc.
However, ioctl(ATMARPD_CTRL) sets NULL to vcc->push() in
atm_init_atmarp(), resulting in memory leak.
Let's serialise two ioctl() by lock_sock() and check vcc->push()
in atm_init_atmarp() to prevent memleak. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-cpro) Validate the size of the received input buffer
Add buffer_recv_size to store the size of the received bytes.
Validate buffer_recv_size in send_usb_cmd(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: Delay put pmc->idev in mld_del_delrec()
pmc->idev is still used in ip6_mc_clear_src(), so as mld_clear_delrec()
does, the reference should be put after ip6_mc_clear_src() return. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: plug races between subflow fail and subflow creation
We have races similar to the one addressed by the previous patch between
subflow failing and additional subflow creation. They are just harder to
trigger.
The solution is similar. Use a separate flag to track the condition
'socket state prevent any additional subflow creation' protected by the
fallback lock.
The socket fallback makes such flag true, and also receiving or sending
an MP_FAIL option.
The field 'allow_infinite_fallback' is now always touched under the
relevant lock, we can drop the ONCE annotation on write. |
| In the Linux kernel, the following vulnerability has been resolved:
PM / devfreq: Check governor before using governor->name
Commit 96ffcdf239de ("PM / devfreq: Remove redundant governor_name from
struct devfreq") removes governor_name and uses governor->name to replace
it. But devfreq->governor may be NULL and directly using
devfreq->governor->name may cause null pointer exception. Move the check of
governor to before using governor->name. |
| In the Linux kernel, the following vulnerability has been resolved:
powercap: dtpm_cpu: Fix NULL pointer dereference in get_pd_power_uw()
The get_pd_power_uw() function can crash with a NULL pointer dereference
when em_cpu_get() returns NULL. This occurs when a CPU becomes impossible
during runtime, causing get_cpu_device() to return NULL, which propagates
through em_cpu_get() and leads to a crash when em_span_cpus() dereferences
the NULL pointer.
Add a NULL check after em_cpu_get() and return 0 if unavailable,
matching the existing fallback behavior in __dtpm_cpu_setup().
[ rjw: Drop an excess empty code line ] |
| In the Linux kernel, the following vulnerability has been resolved:
staging: fbtft: fix potential memory leak in fbtft_framebuffer_alloc()
In the error paths after fb_info structure is successfully allocated,
the memory allocated in fb_deferred_io_init() for info->pagerefs is not
freed. Fix that by adding the cleanup function on the error path. |
| Buffer Overflow Vulnerability in libcdio in commit 4c840665 allows an attacker to execute arbitrary code via a crafted ISO 9660 image file. |
| In the Linux kernel, the following vulnerability has been resolved:
kasan: remove kasan_find_vm_area() to prevent possible deadlock
find_vm_area() couldn't be called in atomic_context. If find_vm_area() is
called to reports vm area information, kasan can trigger deadlock like:
CPU0 CPU1
vmalloc();
alloc_vmap_area();
spin_lock(&vn->busy.lock)
spin_lock_bh(&some_lock);
<interrupt occurs>
<in softirq>
spin_lock(&some_lock);
<access invalid address>
kasan_report();
print_report();
print_address_description();
kasan_find_vm_area();
find_vm_area();
spin_lock(&vn->busy.lock) // deadlock!
To prevent possible deadlock while kasan reports, remove kasan_find_vm_area(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: prevent A-MSDU attacks in mesh networks
This patch is a mitigation to prevent the A-MSDU spoofing vulnerability
for mesh networks. The initial update to the IEEE 802.11 standard, in
response to the FragAttacks, missed this case (CVE-2025-27558). It can
be considered a variant of CVE-2020-24588 but for mesh networks.
This patch tries to detect if a standard MSDU was turned into an A-MSDU
by an adversary. This is done by parsing a received A-MSDU as a standard
MSDU, calculating the length of the Mesh Control header, and seeing if
the 6 bytes after this header equal the start of an rfc1042 header. If
equal, this is a strong indication of an ongoing attack attempt.
This defense was tested with mac80211_hwsim against a mesh network that
uses an empty Mesh Address Extension field, i.e., when four addresses
are used, and when using a 12-byte Mesh Address Extension field, i.e.,
when six addresses are used. Functionality of normal MSDUs and A-MSDUs
was also tested, and confirmed working, when using both an empty and
12-byte Mesh Address Extension field.
It was also tested with mac80211_hwsim that A-MSDU attacks in non-mesh
networks keep being detected and prevented.
Note that the vulnerability being patched, and the defense being
implemented, was also discussed in the following paper and in the
following IEEE 802.11 presentation:
https://papers.mathyvanhoef.com/wisec2025.pdf
https://mentor.ieee.org/802.11/dcn/25/11-25-0949-00-000m-a-msdu-mesh-spoof-protection.docx |
| A vulnerability has been found in Yonyou KSOA 9.0. Affected by this issue is some unknown functionality of the file /worksheet/work_edit.jsp. Such manipulation of the argument Report leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in Yonyou KSOA 9.0. Affected by this vulnerability is an unknown functionality of the file /worksheet/work_update.jsp. This manipulation of the argument Report causes sql injection. The attack can be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in Yonyou KSOA 9.0. Affected is an unknown function of the file /kp/PrintZPYG.jsp. The manipulation of the argument zpjhid results in sql injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: zd1211rw: Fix potential NULL pointer dereference in zd_mac_tx_to_dev()
There is a potential NULL pointer dereference in zd_mac_tx_to_dev(). For
example, the following is possible:
T0 T1
zd_mac_tx_to_dev()
/* len == skb_queue_len(q) */
while (len > ZD_MAC_MAX_ACK_WAITERS) {
filter_ack()
spin_lock_irqsave(&q->lock, flags);
/* position == skb_queue_len(q) */
for (i=1; i<position; i++)
skb = __skb_dequeue(q)
if (mac->type == NL80211_IFTYPE_AP)
skb = __skb_dequeue(q);
spin_unlock_irqrestore(&q->lock, flags);
skb_dequeue() -> NULL
Since there is a small gap between checking skb queue length and skb being
unconditionally dequeued in zd_mac_tx_to_dev(), skb_dequeue() can return NULL.
Then the pointer is passed to zd_mac_tx_status() where it is dereferenced.
In order to avoid potential NULL pointer dereference due to situations like
above, check if skb is not NULL before passing it to zd_mac_tx_status().
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sched: Increment job count before swapping tail spsc queue
A small race exists between spsc_queue_push and the run-job worker, in
which spsc_queue_push may return not-first while the run-job worker has
already idled due to the job count being zero. If this race occurs, job
scheduling stops, leading to hangs while waiting on the job’s DMA
fences.
Seal this race by incrementing the job count before appending to the
SPSC queue.
This race was observed on a drm-tip 6.16-rc1 build with the Xe driver in
an SVM test case. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: qcom: msm: mark certain pins as invalid for interrupts
On some platforms, the UFS-reset pin has no interrupt logic in TLMM but
is nevertheless registered as a GPIO in the kernel. This enables the
user-space to trigger a BUG() in the pinctrl-msm driver by running, for
example: `gpiomon -c 0 113` on RB2.
The exact culprit is requesting pins whose intr_detection_width setting
is not 1 or 2 for interrupts. This hits a BUG() in
msm_gpio_irq_set_type(). Potentially crashing the kernel due to an
invalid request from user-space is not optimal, so let's go through the
pins and mark those that would fail the check as invalid for the irq chip
as we should not even register them as available irqs.
This function can be extended if we determine that there are more
corner-cases like this. |
