| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: reset op_nents when zerocopy page pin fails
When iov_iter_get_pages2() fails in rds_message_zcopy_from_user(),
the pinned pages are released with put_page(), and
rm->data.op_mmp_znotifier is cleared. But we fail to properly
clear rm->data.op_nents.
Later when rds_message_purge() is called from rds_sendmsg() the
cleanup loop iterates over the incorrectly non zero number of
op_nents and frees them again.
Fix this by properly resetting op_nents when it should be in
rds_message_zcopy_from_user(). |
| Concurrency and locking defects in GSS-TSIG |
| Incorrect Default Permissions vulnerability in Saphira Saphira Connect allows Privilege Escalation.
This issue affects Saphira Connect: before 9. |
| Incorrect Execution-Assigned Permissions vulnerability in Saphira Saphira Connect allows Privilege Escalation.
This issue affects Saphira Connect: before 9. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: handle zerocopy send cleanup before the message is queued
A zerocopy send can fail after user pages have been pinned but before
the message is attached to the sending socket.
The purge path currently infers zerocopy state from rm->m_rs, so an
unqueued message can be cleaned up as if it owned normal payload pages.
However, zerocopy ownership is really determined by the presence of
op_mmp_znotifier, regardless of whether the message has reached the
socket queue.
Capture op_mmp_znotifier up front in rds_message_purge() and use it as
the cleanup discriminator. If the message is already associated with a
socket, keep the existing completion path. Otherwise, drop the pinned
page accounting directly and release the notifier before putting the
payload pages.
This keeps early send failure cleanup consistent with the zerocopy
lifetime rules without changing the normal queued completion path. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: rpl: reserve mac_len headroom when recompressed SRH grows
ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps
the next segment into ipv6_hdr->daddr, recompresses, then pulls the old
header and pushes the new one plus the IPv6 header back. The
recompressed header can be larger than the received one when the swap
reduces the common-prefix length the segments share with daddr (CmprI=0,
CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes).
pskb_expand_head() was gated on segments_left == 0, so on earlier
segments the push consumed unchecked headroom. Once skb_push() leaves
fewer than skb->mac_len bytes in front of data,
skb_mac_header_rebuild()'s call to:
skb_set_mac_header(skb, -skb->mac_len);
will store (data - head) - mac_len into the u16 mac_header field, which
wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB
past skb->head.
A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two
segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one
pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv.
Fix this by expanding the head whenever the remaining room is less than
the push size plus mac_len, and request that much extra so the rebuilt
MAC header fits afterwards. |
| In the Linux kernel, the following vulnerability has been resolved:
rtmutex: Use waiter::task instead of current in remove_waiter()
remove_waiter() is used by the slowlock paths, but it is also used for
proxy-lock rollback in rt_mutex_start_proxy_lock() when invoked from
futex_requeue().
In the latter case waiter::task is not current, but remove_waiter()
operates on current for the dequeue operation. That results in several
problems:
1) the rbtree dequeue happens without waiter::task::pi_lock being held
2) the waiter task's pi_blocked_on state is not cleared, which leaves a
dangling pointer primed for UAF around.
3) rt_mutex_adjust_prio_chain() operates on the wrong top priority waiter
task
Use waiter::task instead of current in all related operations in
remove_waiter() to cure those problems.
[ tglx: Fixup rt_mutex_adjust_prio_chain(), add a comment and amend the
changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Disallow re-exporting imported GEM objects
Prevent re-exporting of imported GEM buffers by adding a custom
prime_handle_to_fd callback that checks if the object is imported
and returns -EOPNOTSUPP if so.
Re-exporting imported GEM buffers causes loss of buffer flags settings,
leading to incorrect device access and data corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: udlfb: add vm_ops to dlfb_ops_mmap to prevent use-after-free
dlfb_ops_mmap() uses remap_pfn_range() to map vmalloc framebuffer pages
to userspace but sets no vm_ops on the VMA. This means the kernel cannot
track active mmaps. When dlfb_realloc_framebuffer() replaces the backing
buffer via FBIOPUT_VSCREENINFO, existing mmap PTEs are not invalidated.
On USB disconnect, dlfb_ops_destroy() calls vfree() on the old pages
while userspace PTEs still reference them, resulting in a use-after-free:
the process retains read/write access to freed kernel pages.
Add vm_operations_struct with open/close callbacks that maintain an
atomic mmap_count on struct dlfb_data. In dlfb_realloc_framebuffer(),
check mmap_count and return -EBUSY if the buffer is currently mapped,
preventing buffer replacement while userspace holds stale PTEs.
Tested with PoC using dummy_hcd + raw_gadget USB device emulation. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_red: Replace direct dequeue call with peek and qdisc_dequeue_peeked
When red qdisc has children (eg qfq qdisc) whose peek() callback is
qdisc_peek_dequeued(), we could get a kernel panic. When the parent of such
qdiscs (eg illustrated in patch #3 as tbf) wants to retrieve an skb from
its child (red in this case), it will do the following:
1a. do a peek() - and when sensing there's an skb the child can offer, then
- the child in this case(red) calls its child's (qfq) peek.
qfq does the right thing and will return the gso_skb queue packet.
Note: if there wasnt a gso_skb entry then qfq will store it there.
1b. invoke a dequeue() on the child (red). And herein lies the problem.
- red will call the child's dequeue() which will essentially just
try to grab something of qfq's queue.
[ 78.667668][ T363] KASAN: null-ptr-deref in range [0x0000000000000048-0x000000000000004f]
[ 78.667927][ T363] CPU: 1 UID: 0 PID: 363 Comm: ping Not tainted 7.1.0-rc1-00033-g46f74a3f7d57-dirty #790 PREEMPT(full)
[ 78.668263][ T363] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 78.668486][ T363] RIP: 0010:qfq_dequeue+0x446/0xc90 [sch_qfq]
[ 78.668718][ T363] Code: 54 c0 e8 dd 90 00 f1 48 c7 c7 e0 03 54 c0 48 89 de e8 ce 90 00 f1 48 8d 7b 48 b8 ff ff 37 00 48 89 fa 48 c1 e0 2a 48 c1 ea 03 <80> 3c 02 00 74 05 e8 ef a1 e1 f1 48 8b 7b 48 48 8d 54 24 58 48 8d
[ 78.669312][ T363] RSP: 0018:ffff88810de573e0 EFLAGS: 00010216
[ 78.669533][ T363] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 78.669790][ T363] RDX: 0000000000000009 RSI: 0000000000000004 RDI: 0000000000000048
[ 78.670044][ T363] RBP: ffff888110dc4000 R08: ffffffffb1b0885a R09: fffffbfff6ba9078
[ 78.670297][ T363] R10: 0000000000000003 R11: ffff888110e31c80 R12: 0000001880000000
[ 78.670560][ T363] R13: ffff888110dc4150 R14: ffff888110dc42b8 R15: 0000000000000200
[ 78.670814][ T363] FS: 00007f66a8f09c40(0000) GS:ffff888163428000(0000) knlGS:0000000000000000
[ 78.671110][ T363] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 78.671324][ T363] CR2: 000055db4c6a30a8 CR3: 000000010da67000 CR4: 0000000000750ef0
[ 78.671585][ T363] PKRU: 55555554
[ 78.671713][ T363] Call Trace:
[ 78.671843][ T363] <TASK>
[ 78.671936][ T363] ? __pfx_qfq_dequeue+0x10/0x10 [sch_qfq]
[ 78.672148][ T363] ? __pfx__printk+0x10/0x10
[ 78.672322][ T363] ? srso_alias_return_thunk+0x5/0xfbef5
[ 78.672496][ T363] ? lockdep_hardirqs_on_prepare+0xa8/0x1a0
[ 78.672706][ T363] ? srso_alias_return_thunk+0x5/0xfbef5
[ 78.672875][ T363] ? trace_hardirqs_on+0x19/0x1a0
[ 78.673047][ T363] red_dequeue+0x65/0x270 [sch_red]
[ 78.673217][ T363] ? srso_alias_return_thunk+0x5/0xfbef5
[ 78.673385][ T363] tbf_dequeue.cold+0xb0/0x70c [sch_tbf]
[ 78.673566][ T363] __qdisc_run+0x169/0x1900
The right thing to do in #1b is to grab the skb off gso_skb queue.
This patchset fixes that issue by changing #1b to use qdisc_dequeue_peeked()
method instead. |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: validate port_count against message length in t7xx_port_enum_msg_handler
t7xx_port_enum_msg_handler() uses the modem-supplied port_count field as
a loop bound over port_msg->data[] without checking that the message buffer
contains sufficient data. A modem sending port_count=65535 in a 12-byte
buffer triggers a slab-out-of-bounds read of up to 262140 bytes.
Add a sizeof(*port_msg) check before accessing the port message header
fields to guard against undersized messages.
Add a struct_size() check after extracting port_count and before the loop.
In t7xx_parse_host_rt_data(), guard the rt_feature header read with a
remaining-buffer check before accessing data_len, validate feat_data_len
against the actual remaining buffer to prevent OOB reads and signed
integer overflow on offset.
Pass msg_len from both call sites: skb->len at the DPMAIF path after
skb_pull(), and the validated feat_data_len at the handshake path. |
| Mattermost versions 11.6.x <= 11.6.0, 11.5.x <= 11.5.3, 11.4.x <= 11.4.4, 10.11.x <= 10.11.14 fail to check integration URL for path traversal which allows an malicious authenticated user to call an arbitrary API via system admin Mattermost auth token using via path traversal in integration action URL.. Mattermost Advisory ID: MMSA-2026-00640 |
| A dead bounds check in the Spotlight RPC unmarshaller in Netatalk 3.0.0 through 4.4.2 results in an unreachable code path that provides no effective bounds protection, which may allow a remote authenticated attacker to obtain limited information via crafted Spotlight RPC requests. |
| The Avada (Fusion) Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via multiple shortcodes in all versions up to, and including, 3.15.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Subscriber-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user (typically an administrator) accesses a page displaying dynamic user data (such as via the Dynamic Data feature pulling user biographical information). |
| Netatalk 3.1.2 through 4.4.2 is compiled without FORTIFY_SOURCE, which disables built-in buffer overflow detection at runtime, potentially allowing a remote attacker to cause a minor denial of service via memory errors that would otherwise be caught and safely terminated by runtime protection. |
| Honeywell Control
Network Module (CNM) contains
insertion of sensitive information into an unintended directory. An attacker could exploit this vulnerability through probing
system files, potentially resulting in unintended
access to protected data. |
| Exposure of Sensitive System Information to an Unauthorized Control Sphere vulnerability in WPFunnels Team Mail Mint allows Retrieve Embedded Sensitive Data.
This issue affects Mail Mint: from n/a through 1.19.5. |
| MediaArea MediaInfoLib LXF element parsing heap-based buffer overflow vulnerability |
| Insufficient Validation of Names During AXFR |
| Insufficient Validation of Autoprimary SOA Queries |
