| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: safexcel - Cleanup ring IRQ workqueues on load failure
A failure loading the safexcel driver results in the following warning
on boot, because the IRQ affinity has not been correctly cleaned up.
Ensure we clean up the affinity and workqueues on a failure to load the
driver.
crypto-safexcel: probe of f2800000.crypto failed with error -2
------------[ cut here ]------------
WARNING: CPU: 1 PID: 232 at kernel/irq/manage.c:1913 free_irq+0x300/0x340
Modules linked in: hwmon mdio_i2c crypto_safexcel(+) md5 sha256_generic libsha256 authenc libdes omap_rng rng_core nft_masq nft_nat nft_chain_nat nf_nat nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables libcrc32c nfnetlink fuse autofs4
CPU: 1 PID: 232 Comm: systemd-udevd Tainted: G W 6.1.6-00002-g9d4898824677 #3
Hardware name: MikroTik RB5009 (DT)
pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : free_irq+0x300/0x340
lr : free_irq+0x2e0/0x340
sp : ffff800008fa3890
x29: ffff800008fa3890 x28: 0000000000000000 x27: 0000000000000000
x26: ffff8000008e6dc0 x25: ffff000009034cac x24: ffff000009034d50
x23: 0000000000000000 x22: 000000000000004a x21: ffff0000093e0d80
x20: ffff000009034c00 x19: ffff00000615fc00 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 000075f5c1584c5e
x14: 0000000000000017 x13: 0000000000000000 x12: 0000000000000040
x11: ffff000000579b60 x10: ffff000000579b62 x9 : ffff800008bbe370
x8 : ffff000000579dd0 x7 : 0000000000000000 x6 : ffff000000579e18
x5 : ffff000000579da8 x4 : ffff800008ca0000 x3 : ffff800008ca0188
x2 : 0000000013033204 x1 : ffff000009034c00 x0 : ffff8000087eadf0
Call trace:
free_irq+0x300/0x340
devm_irq_release+0x14/0x20
devres_release_all+0xa0/0x100
device_unbind_cleanup+0x14/0x60
really_probe+0x198/0x2d4
__driver_probe_device+0x74/0xdc
driver_probe_device+0x3c/0x110
__driver_attach+0x8c/0x190
bus_for_each_dev+0x6c/0xc0
driver_attach+0x20/0x30
bus_add_driver+0x148/0x1fc
driver_register+0x74/0x120
__platform_driver_register+0x24/0x30
safexcel_init+0x48/0x1000 [crypto_safexcel]
do_one_initcall+0x4c/0x1b0
do_init_module+0x44/0x1cc
load_module+0x1724/0x1be4
__do_sys_finit_module+0xbc/0x110
__arm64_sys_finit_module+0x1c/0x24
invoke_syscall+0x44/0x110
el0_svc_common.constprop.0+0xc0/0xe0
do_el0_svc+0x20/0x80
el0_svc+0x14/0x4c
el0t_64_sync_handler+0xb0/0xb4
el0t_64_sync+0x148/0x14c
---[ end trace 0000000000000000 ]--- |
| The web server used by MikroTik RouterOS version 6 is affected by a heap memory corruption issue. A remote and unauthenticated attacker can corrupt the server's heap memory by sending a crafted HTTP request. As a result, the web interface crashes and is immediately restarted. The issue was fixed in RouterOS 6.49.10 stable. RouterOS version 7 is not affected. |
| MikroTik RouterOS stable before 6.49.7 and long-term through 6.48.6 are vulnerable to a privilege escalation issue. A remote and authenticated attacker can escalate privileges from admin to super-admin on the Winbox or HTTP interface. The attacker can abuse this vulnerability to execute arbitrary code on the system. |
| MikroTik RouterOS through 6.42 allows unauthenticated remote attackers to read arbitrary files and remote authenticated attackers to write arbitrary files due to a directory traversal vulnerability in the WinBox interface. |
| A buffer overflow was found in the MikroTik RouterOS SMB service when processing NetBIOS session request messages. Remote attackers with access to the service can exploit this vulnerability and gain code execution on the system. The overflow occurs before authentication takes place, so it is possible for an unauthenticated remote attacker to exploit it. All architectures and all devices running RouterOS before versions 6.41.3/6.42rc27 are vulnerable. |
| An issue in MikroTik RouterOS v.7.14.2 and SwOS v.2.18 exposes the WebFig management interface over cleartext HTTP by default, allowing an on-path attacker to execute injected JavaScript in the administrator’s browser and intercept credentials. |
| A vulnerability has been found in MikroTik RouterOS 7. This affects the function parse_json_element of the file /rest/ip/address/print of the component libjson.so. The manipulation leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 7.20.1 and 7.21beta2 mitigates this issue. You should upgrade the affected component. The vendor replied: "Our bug tracker reports that your issue has been fixed. This means that we plan to release a RouterOS update with this fix. Make sure to upgrade to the next release when it comes out." |
| Mikrotik RouterOS VXLAN Source IP Improper Access Control Vulnerability. This vulnerability allows remote attackers to bypass access restrictions on affected installations of Mikrotik RouterOS. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the handling of remote IP addresses when processing VXLAN traffic. The issue results from the lack of validation of the remote IP address against configured values prior to allowing ingress traffic into the internal network. An attacker can leverage this vulnerability to gain access to internal network resources. Was ZDI-CAN-26415. |
| MikroTik RouterOS before 6.43.12 (stable) and 6.42.12 (long-term) is vulnerable to an intermediary vulnerability. The software will execute user defined network requests to both WAN and LAN clients. A remote unauthenticated attacker can use this vulnerability to bypass the router's firewall or for general network scanning activities. |
| A misconfiguration in the default settings of MikroTik RouterOS 7 and fixed in v7.14 allows incoming IPv6 UDP traceroute packets. |
| A cross-site scripting vulnerability is present in the hotspot of MikroTik's RouterOS on versions below 7.19.2. An attacker can inject the `javascript` protocol in the `dst` parameter. When the victim browses to the malicious URL and logs in, the XSS executes. The POST request used to login, can also be converted to a GET request, allowing an attacker to send a specifically crafted URL that automatically logs in the victim (into the attacker's account) and triggers the payload. |
| Mikrotik RouterOS RADVD Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of Mikrotik RouterOS. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the Router Advertisement Daemon. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of root.
. Was ZDI-CAN-19797. |
| An issue was discovered in the Winbox service of MikroTik RouterOS long-term release v6.43.13 through v6.49.13 and stable v6.43 through v7.17.2. A patch is available in the stable release v6.49.18. A discrepancy in response size between connection attempts made with a valid username and those with an invalid username allows attackers to enumerate for valid accounts. |
| MikroTik RouterOS 6.40.5, the SMB service contains a memory corruption vulnerability. Remote, unauthenticated attackers can exploit this issue by sending specially crafted packets, triggering a null pointer dereference. This leads to a Remote Denial of Service (DoS), rendering the SMB service unavailable. |
| The Mikrotik RouterOS web server allows memory corruption in releases before Stable 6.38.5 and Long-term 6.37.5, aka Chimay-Red. A remote and unauthenticated user can trigger the vulnerability by sending a crafted HTTP request. An attacker can use this vulnerability to execute arbitrary code on the affected system, as exploited in the wild in mid-2017 and later. |
| Mikrotik RouterOs before stable v7.6 was discovered to contain an out-of-bounds read in the snmp process. This vulnerability allows attackers to execute arbitrary code via a crafted packet. |
| Mikrotik RouterOs before stable v7.5 was discovered to contain an out-of-bounds read in the hotspot process. This vulnerability allows attackers to execute arbitrary code via a crafted nova message. |
| The MikroTik Router hAP Lite 6.25 has no protection mechanism for unsolicited TCP ACK packets in the case of a fast network connection, which allows remote attackers to cause a denial of service (CPU consumption) by sending many ACK packets. After the attacker stops the exploit, the CPU usage is 100% and the router requires a reboot for normal operation. |
| The L2TP Client in MikroTik RouterOS versions 6.83.3 and 6.37.4 does not enable IPsec encryption after a reboot, which allows man-in-the-middle attackers to view transmitted data unencrypted and gain access to networks on the L2TP server by monitoring the packets for the transmitted data and obtaining the L2TP secret. |
| MikroTik v6.40.5 devices allow remote attackers to cause a denial of service via a flood of ICMP packets. |
