| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate response sizes in ipc_validate_msg()
ipc_validate_msg() computes the expected message size for each
response type by adding (or multiplying) attacker-controlled fields
from the daemon response to a fixed struct size in unsigned int
arithmetic. Three cases can overflow:
KSMBD_EVENT_RPC_REQUEST:
msg_sz = sizeof(struct ksmbd_rpc_command) + resp->payload_sz;
KSMBD_EVENT_SHARE_CONFIG_REQUEST:
msg_sz = sizeof(struct ksmbd_share_config_response) +
resp->payload_sz;
KSMBD_EVENT_LOGIN_REQUEST_EXT:
msg_sz = sizeof(struct ksmbd_login_response_ext) +
resp->ngroups * sizeof(gid_t);
resp->payload_sz is __u32 and resp->ngroups is __s32. Each addition
can wrap in unsigned int; the multiplication by sizeof(gid_t) mixes
signed and size_t, so a negative ngroups is converted to SIZE_MAX
before the multiply. A wrapped value of msg_sz that happens to
equal entry->msg_sz bypasses the size check on the next line, and
downstream consumers (smb2pdu.c:6742 memcpy using rpc_resp->payload_sz,
kmemdup in ksmbd_alloc_user using resp_ext->ngroups) then trust the
unverified length.
Use check_add_overflow() on the RPC_REQUEST and SHARE_CONFIG_REQUEST
paths to detect integer overflow without constraining functional
payload size; userspace ksmbd-tools grows NDR responses in 4096-byte
chunks for calls like NetShareEnumAll, so a hard transport cap is
unworkable on the response side. For LOGIN_REQUEST_EXT, reject
resp->ngroups outside the signed [0, NGROUPS_MAX] range up front and
report the error from ipc_validate_msg() so it fires at the IPC
boundary; with that bound the subsequent multiplication and addition
stay well below UINT_MAX. The now-redundant ngroups check and
pr_err in ksmbd_alloc_user() are removed.
This is the response-side analogue of aab98e2dbd64 ("ksmbd: fix
integer overflows on 32 bit systems"), which hardened the request
side. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: caam - fix DMA corruption on long hmac keys
When a key longer than block size is supplied, it is copied and then
hashed into the real key. The memory allocated for the copy needs to
be rounded to DMA cache alignment, as otherwise the hashed key may
corrupt neighbouring memory.
The rounding was performed, but never actually used for the allocation.
Fix this by replacing kmemdup with kmalloc for a larger buffer,
followed by memcpy. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Change AMDGPU_VA_RESERVED_TRAP_SIZE to 64KB
Currently, AMDGPU_VA_RESERVED_TRAP_SIZE is hardcoded to 8KB, while
KFD_CWSR_TBA_TMA_SIZE is defined as 2 * PAGE_SIZE. On systems with
4K pages, both values match (8KB), so allocation and reserved space
are consistent.
However, on 64K page-size systems, KFD_CWSR_TBA_TMA_SIZE becomes 128KB,
while the reserved trap area remains 8KB. This mismatch causes the
kernel to crash when running rocminfo or rccl unit tests.
Kernel attempted to read user page (2) - exploit attempt? (uid: 1001)
BUG: Kernel NULL pointer dereference on read at 0x00000002
Faulting instruction address: 0xc0000000002c8a64
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
CPU: 34 UID: 1001 PID: 9379 Comm: rocminfo Tainted: G E
6.19.0-rc4-amdgpu-00320-gf23176405700 #56 VOLUNTARY
Tainted: [E]=UNSIGNED_MODULE
Hardware name: IBM,9105-42A POWER10 (architected) 0x800200 0xf000006
of:IBM,FW1060.30 (ML1060_896) hv:phyp pSeries
NIP: c0000000002c8a64 LR: c00000000125dbc8 CTR: c00000000125e730
REGS: c0000001e0957580 TRAP: 0300 Tainted: G E
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24008268
XER: 00000036
CFAR: c00000000125dbc4 DAR: 0000000000000002 DSISR: 40000000
IRQMASK: 1
GPR00: c00000000125d908 c0000001e0957820 c0000000016e8100
c00000013d814540
GPR04: 0000000000000002 c00000013d814550 0000000000000045
0000000000000000
GPR08: c00000013444d000 c00000013d814538 c00000013d814538
0000000084002268
GPR12: c00000000125e730 c000007e2ffd5f00 ffffffffffffffff
0000000000020000
GPR16: 0000000000000000 0000000000000002 c00000015f653000
0000000000000000
GPR20: c000000138662400 c00000013d814540 0000000000000000
c00000013d814500
GPR24: 0000000000000000 0000000000000002 c0000001e0957888
c0000001e0957878
GPR28: c00000013d814548 0000000000000000 c00000013d814540
c0000001e0957888
NIP [c0000000002c8a64] __mutex_add_waiter+0x24/0xc0
LR [c00000000125dbc8] __mutex_lock.constprop.0+0x318/0xd00
Call Trace:
0xc0000001e0957890 (unreliable)
__mutex_lock.constprop.0+0x58/0xd00
amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x6fc/0xb60 [amdgpu]
kfd_process_alloc_gpuvm+0x54/0x1f0 [amdgpu]
kfd_process_device_init_cwsr_dgpu+0xa4/0x1a0 [amdgpu]
kfd_process_device_init_vm+0xd8/0x2e0 [amdgpu]
kfd_ioctl_acquire_vm+0xd0/0x130 [amdgpu]
kfd_ioctl+0x514/0x670 [amdgpu]
sys_ioctl+0x134/0x180
system_call_exception+0x114/0x300
system_call_vectored_common+0x15c/0x2ec
This patch changes AMDGPU_VA_RESERVED_TRAP_SIZE to 64 KB and
KFD_CWSR_TBA_TMA_SIZE to the AMD GPU page size. This means we reserve
64 KB for the trap in the address space, but only allocate 8 KB within
it. With this approach, the allocation size never exceeds the reserved
area.
(cherry picked from commit 31b8de5e55666f26ea7ece5f412b83eab3f56dbb) |
| In the Linux kernel, the following vulnerability has been resolved:
nvmem: zynqmp_nvmem: Fix buffer size in DMA and memcpy
Buffer size used in dma allocation and memcpy is wrong.
It can lead to undersized DMA buffer access and possible
memory corruption. use correct buffer size in dma_alloc_coherent
and memcpy. |
| In the Linux kernel, the following vulnerability has been resolved:
vt: discard stale unicode buffer on alt screen exit after resize
When enter_alt_screen() saves vc_uni_lines into vc_saved_uni_lines and
sets vc_uni_lines to NULL, a subsequent console resize via vc_do_resize()
skips reallocating the unicode buffer because vc_uni_lines is NULL.
However, vc_saved_uni_lines still points to the old buffer allocated for
the original dimensions.
When leave_alt_screen() later restores vc_saved_uni_lines, the buffer
dimensions no longer match vc_rows/vc_cols. Any operation that iterates
over the unicode buffer using the current dimensions (e.g. csi_J clearing
the screen) will access memory out of bounds, causing a kernel oops:
BUG: unable to handle page fault for address: 0x0000002000000020
RIP: 0010:csi_J+0x133/0x2d0
The faulting address 0x0000002000000020 is two adjacent u32 space
characters (0x20) interpreted as a pointer, read from the row data area
past the end of the 25-entry pointer array in a buffer allocated for
80x25 but accessed with 240x67 dimensions.
Fix this by checking whether the console dimensions changed while in the
alternate screen. If they did, free the stale saved buffer instead of
restoring it. The unicode screen will be lazily rebuilt via
vc_uniscr_check() when next needed. |
| Inappropriate implementation in Tint in Google Chrome prior to 147.0.7727.138 allowed a remote attacker to perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High) |
| Heap buffer overflow in CertFromX509 via AuthorityKeyIdentifier size confusion. A heap buffer overflow occurs when converting an X.509 certificate internally due to incorrect size handling of the AuthorityKeyIdentifier extension. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buff size instead
of DMA write size. Different assumptions in ice driver configuration lead
to negative tailroom.
This allows to trigger kernel panic, when using
XDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to
6912 and the requested offset to a huge value, e.g.
XSK_UMEM__MAX_FRAME_SIZE * 100.
Due to other quirks of the ZC configuration in ice, panic is not observed
in ZC mode, but tailroom growing still fails when it should not.
Use fill queue buffer truesize instead of DMA write size in XDP RxQ info.
Fix ZC mode too by using the new helper. |
| A flaw was found in GIMP. Processing a specially crafted PVR image file with large dimensions can lead to a denial of service (DoS). This occurs due to a stack-based buffer overflow and an out-of-bounds read in the PVR image loader, causing the application to crash. Systems that process untrusted PVR image files are affected. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: nexthop: allocate skb dynamically in rtm_get_nexthop()
When querying a nexthop object via RTM_GETNEXTHOP, the kernel currently
allocates a fixed-size skb using NLMSG_GOODSIZE. While sufficient for
single nexthops and small Equal-Cost Multi-Path groups, this fixed
allocation fails for large nexthop groups like 512 nexthops.
This results in the following warning splat:
WARNING: net/ipv4/nexthop.c:3395 at rtm_get_nexthop+0x176/0x1c0, CPU#20: rep/4608
[...]
RIP: 0010:rtm_get_nexthop (net/ipv4/nexthop.c:3395)
[...]
Call Trace:
<TASK>
rtnetlink_rcv_msg (net/core/rtnetlink.c:6989)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
____sys_sendmsg (net/socket.c:721 net/socket.c:736 net/socket.c:2585)
___sys_sendmsg (net/socket.c:2641)
__sys_sendmsg (net/socket.c:2671)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
</TASK>
Fix this by allocating the size dynamically using nh_nlmsg_size() and
using nlmsg_new(), this is consistent with nexthop_notify() behavior. In
addition, adjust nh_nlmsg_size_grp() so it calculates the size needed
based on flags passed. While at it, also add the size of NHA_FDB for
nexthop group size calculation as it was missing too.
This cannot be reproduced via iproute2 as the group size is currently
limited and the command fails as follows:
addattr_l ERROR: message exceeded bound of 1048 |
| rust-openssl provides OpenSSL bindings for the Rust programming language. From 0.9.27 to before 0.10.78, Deriver::derive (and PkeyCtxRef::derive) sets len = buf.len() and passes it as the in/out length to EVP_PKEY_derive, relying on OpenSSL to honor it. On OpenSSL 1.1.x, X25519, X448, DH and HKDF-extract ignore the incoming *keylen, unconditionally writing the full shared secret (32/56/prime-size bytes). A caller passing a short slice gets a heap/stack overflow from safe code. OpenSSL 3.x providers do check, so this only impacts older OpenSSL. This vulnerability is fixed in 0.10.78. |
| In the Linux kernel, the following vulnerability has been resolved:
af_key: validate families in pfkey_send_migrate()
syzbot was able to trigger a crash in skb_put() [1]
Issue is that pfkey_send_migrate() does not check old/new families,
and that set_ipsecrequest() @family argument was truncated,
thus possibly overfilling the skb.
Validate families early, do not wait set_ipsecrequest().
[1]
skbuff: skb_over_panic: text:ffffffff8a752120 len:392 put:16 head:ffff88802a4ad040 data:ffff88802a4ad040 tail:0x188 end:0x180 dev:<NULL>
kernel BUG at net/core/skbuff.c:214 !
Call Trace:
<TASK>
skb_over_panic net/core/skbuff.c:219 [inline]
skb_put+0x159/0x210 net/core/skbuff.c:2655
skb_put_zero include/linux/skbuff.h:2788 [inline]
set_ipsecrequest net/key/af_key.c:3532 [inline]
pfkey_send_migrate+0x1270/0x2e50 net/key/af_key.c:3636
km_migrate+0x155/0x260 net/xfrm/xfrm_state.c:2848
xfrm_migrate+0x2140/0x2450 net/xfrm/xfrm_policy.c:4705
xfrm_do_migrate+0x8ff/0xaa0 net/xfrm/xfrm_user.c:3150 |
| NEMU (OpenXiangShan/NEMU) before v2025.12.r2 contains an improper instruction-validation flaw in its RISC-V Vector (RVV) decoder. The decoder does not correctly validate the funct3 field when decoding vsetvli/vsetivli/vsetvl, allowing certain invalid OP-V instruction encodings to be misinterpreted and executed as vset* configuration instructions rather than raising an illegal-instruction exception. This can be exploited by providing crafted RISC-V binaries to cause incorrect trap behavior, architectural state corruption/divergence, and potential denial of service in systems that rely on NEMU for correct execution or sandboxing. |
| Noir is a Domain Specific Language for SNARK proving systems that is designed to use any ACIR compatible proving system, and Brillig is the bytecode ACIR uses for non-determinism. Noir programs can invoke external functions through foreign calls. When compiling to Brillig bytecode, the SSA instructions are processed block-by-block in `BrilligBlock::compile_block()`. When the compiler encounters an `Instruction::Call` with a `Value::ForeignFunction` target, it invokes `codegen_call()` in `brillig_call/code_gen_call.rs`, which dispatches to `convert_ssa_foreign_call()`. Before emitting the foreign call opcode, the compiler must pre-allocate memory for any array results the call will return. This happens through `allocate_external_call_results()`, which iterates over the result types. For `Type::Array` results, it delegates to `allocate_foreign_call_result_array()` to recursively allocate memory on the heap for nested arrays. The `BrilligArray` struct is the internal representation of a Noir array in Brillig IR. Its `size` field represents the semi-flattened size, the total number of memory slots the array occupies, accounting for the fact that composite types like tuples consume multiple slots per element. This size is computed by `compute_array_length()` in `brillig_block_variables.rs`. For the outer array, `allocate_external_call_results()` correctly uses `define_variable()`, which internally calls `allocate_value_with_type()`. This function applies the formula above, producing the correct semi-flattened size. However, for nested arrays, `allocate_foreign_call_result_array()` contains a bug. The pattern `Type::Array(_, nested_size)` discards the inner types with `_` and uses only `nested_size`, the semantic length of the nested array (the number of logical elements), not the semi-flattened size. For simple element types this works correctly, but for composite element types it under-allocates. Foreign calls returning nested arrays of tuples or other composite types corrupt the Brillig VM heap. Version 1.0.0-beta.19 fixes this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: replace hardcoded hdr2_len with offsetof() in smb2_calc_max_out_buf_len()
After this commit (e2b76ab8b5c9 "ksmbd: add support for read compound"),
response buffer management was changed to use dynamic iov array.
In the new design, smb2_calc_max_out_buf_len() expects the second
argument (hdr2_len) to be the offset of ->Buffer field in the
response structure, not a hardcoded magic number.
Fix the remaining call sites to use the correct offsetof() value. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: proc: size address buffers for %pISpc output
The AF_RXRPC procfs helpers format local and remote socket addresses into
fixed 50-byte stack buffers with "%pISpc".
That is too small for the longest current-tree IPv6-with-port form the
formatter can produce. In lib/vsprintf.c, the compressed IPv6 path uses a
dotted-quad tail not only for v4mapped addresses, but also for ISATAP
addresses via ipv6_addr_is_isatap().
As a result, a case such as
[ffff:ffff:ffff:ffff:0:5efe:255.255.255.255]:65535
is possible with the current formatter. That is 50 visible characters, so
51 bytes including the trailing NUL, which does not fit in the existing
char[50] buffers used by net/rxrpc/proc.c.
Size the buffers from the formatter's maximum textual form and switch the
call sites to scnprintf().
Changes since v1:
- correct the changelog to cite the actual maximum current-tree case
explicitly
- frame the proof around the ISATAP formatting path instead of the earlier
mapped-v4 example |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: avoid OGM aggregation when skb tailroom is insufficient
When OGM aggregation state is toggled at runtime, an existing forwarded
packet may have been allocated with only packet_len bytes, while a later
packet can still be selected for aggregation. Appending in this case can
hit skb_put overflow conditions.
Reject aggregation when the target skb tailroom cannot accommodate the new
packet. The caller then falls back to creating a new forward packet
instead of appending. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix OOB write in QUERY_INFO for compound requests
When a compound request such as READ + QUERY_INFO(Security) is received,
and the first command (READ) consumes most of the response buffer,
ksmbd could write beyond the allocated buffer while building a security
descriptor.
The root cause was that smb2_get_info_sec() checked buffer space using
ppntsd_size from xattr, while build_sec_desc() often synthesized a
significantly larger descriptor from POSIX ACLs.
This patch introduces smb_acl_sec_desc_scratch_len() to accurately
compute the final descriptor size beforehand, performs proper buffer
checking with smb2_calc_max_out_buf_len(), and uses exact-sized
allocation + iov pinning. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix unsound scalar forking in maybe_fork_scalars() for BPF_OR
maybe_fork_scalars() is called for both BPF_AND and BPF_OR when the
source operand is a constant. When dst has signed range [-1, 0], it
forks the verifier state: the pushed path gets dst = 0, the current
path gets dst = -1.
For BPF_AND this is correct: 0 & K == 0.
For BPF_OR this is wrong: 0 | K == K, not 0.
The pushed path therefore tracks dst as 0 when the runtime value is K,
producing an exploitable verifier/runtime divergence that allows
out-of-bounds map access.
Fix this by passing env->insn_idx (instead of env->insn_idx + 1) to
push_stack(), so the pushed path re-executes the ALU instruction with
dst = 0 and naturally computes the correct result for any opcode. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix heap overflow in NFSv4.0 LOCK replay cache
The NFSv4.0 replay cache uses a fixed 112-byte inline buffer
(rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses.
This size was calculated based on OPEN responses and does not account
for LOCK denied responses, which include the conflicting lock owner as
a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT).
When a LOCK operation is denied due to a conflict with an existing lock
that has a large owner, nfsd4_encode_operation() copies the full encoded
response into the undersized replay buffer via read_bytes_from_xdr_buf()
with no bounds check. This results in a slab-out-of-bounds write of up
to 944 bytes past the end of the buffer, corrupting adjacent heap memory.
This can be triggered remotely by an unauthenticated attacker with two
cooperating NFSv4.0 clients: one sets a lock with a large owner string,
then the other requests a conflicting lock to provoke the denial.
We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full
opaque, but that would increase the size of every stateowner, when most
lockowners are not that large.
Instead, fix this by checking the encoded response length against
NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the
response is too large, set rp_buflen to 0 to skip caching the replay
payload. The status is still cached, and the client already received the
correct response on the original request. |
