| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix rlimit for posix cpu timers
Posix cpu timers requires an additional step beyond setting the rlimit.
Refactor the code so its clear when what code is setting the
limit and conditionally update the posix cpu timers when appropriate. |
| In the Linux kernel, the following vulnerability has been resolved:
tun: free page on build_skb failure in tun_xdp_one()
When build_skb() fails in tun_xdp_one(), the function sets ret to
-ENOMEM and jumps to the out label, which returns without freeing the
page that vhost_net_build_xdp() allocated for the frame. As with the
short-frame rejection path, tun_sendmsg() discards the per-buffer error
and still returns total_len, so vhost_tx_batch() takes the success path
and never frees the page. Each build_skb() failure in a batch leaks one
page-frag chunk.
Free the page before taking the error path, matching the put_page() the
other error exits of tun_xdp_one() already perform. |
| In the Linux kernel, the following vulnerability has been resolved:
tun: free page on short-frame rejection in tun_xdp_one()
tun_xdp_one() returns -EINVAL on a frame shorter than ETH_HLEN without
freeing the page that vhost_net_build_xdp() allocated for it.
tun_sendmsg() discards that -EINVAL and still returns total_len, so
vhost_tx_batch() takes the success path and never frees the page; each
short frame in a batch leaks one page-frag chunk.
A local process that can open /dev/net/tun and /dev/vhost-net can hit
this path: it attaches a tun/tap device as the vhost-net backend and
feeds TX descriptors whose length minus the virtio-net header is below
ETH_HLEN. Each kick leaks the page-frag chunks for that batch, and a
tight submission loop exhausts host memory and triggers an OOM panic.
Free the page before returning -EINVAL, matching the XDP-program error
path in the same function. |
| In the Linux kernel, the following vulnerability has been resolved:
tap: free page on error paths in tap_get_user_xdp()
tap_get_user_xdp() rejects a frame shorter than ETH_HLEN with -EINVAL,
and returns -ENOMEM when build_skb() fails. Both paths jump to the err
label without freeing the page that vhost_net_build_xdp() allocated for
the frame. tap_sendmsg() discards the per-buffer return value and always
returns 0, so vhost_tx_batch() takes the success path and never frees
the page; each rejected frame in a batch leaks one page-frag chunk.
Free the page on both error paths, before the skb is built. This is the
tap counterpart of the same leak in tun_xdp_one(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath5k: do not access array OOB
Vincent reports:
> The ath5k driver seems to do an array-index-out-of-bounds access as
> shown by the UBSAN kernel message:
> UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath5k/base.c:1741:20
> index 4 is out of range for type 'ieee80211_tx_rate [4]'
> ...
> Call Trace:
> <TASK>
> dump_stack_lvl+0x5d/0x80
> ubsan_epilogue+0x5/0x2b
> __ubsan_handle_out_of_bounds.cold+0x46/0x4b
> ath5k_tasklet_tx+0x4e0/0x560 [ath5k]
> tasklet_action_common+0xb5/0x1c0
It is real. 'ts->ts_final_idx' can be 3 on 5212, so:
info->status.rates[ts->ts_final_idx + 1].idx = -1;
with the array defined as:
struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES];
while the size is:
#define IEEE80211_TX_MAX_RATES 4
is indeed bogus.
Set this 'idx = -1' sentinel only if the array index is less than the
array size. As mac80211 will not look at rates beyond the size
(IEEE80211_TX_MAX_RATES).
Note: The effect of the OOB write is negligible. It just overwrites the
next member of info->status, i.e. ack_signal. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix held lock freed on hfsplus_fill_super()
hfsplus_fill_super() calls hfs_find_init() to initialize a search
structure, which acquires tree->tree_lock. If the subsequent call to
hfsplus_cat_build_key() fails, the function jumps to the out_put_root
error label without releasing the lock. The later cleanup path then
frees the tree data structure with the lock still held, triggering a
held lock freed warning.
Fix this by adding the missing hfs_find_exit(&fd) call before jumping
to the out_put_root error label. This ensures that tree->tree_lock is
properly released on the error path.
The bug was originally detected on v6.13-rc1 using an experimental
static analysis tool we are developing, and we have verified that the
issue persists in the latest mainline kernel. The tool is specifically
designed to detect memory management issues. It is currently under active
development and not yet publicly available.
We confirmed the bug by runtime testing under QEMU with x86_64 defconfig,
lockdep enabled, and CONFIG_HFSPLUS_FS=y. To trigger the error path, we
used GDB to dynamically shrink the max_unistr_len parameter to 1 before
hfsplus_asc2uni() is called. This forces hfsplus_asc2uni() to naturally
return -ENAMETOOLONG, which propagates to hfsplus_cat_build_key() and
exercises the faulty error path. The following warning was observed
during mount:
=========================
WARNING: held lock freed!
7.0.0-rc3-00016-gb4f0dd314b39 #4 Not tainted
-------------------------
mount/174 is freeing memory ffff888103f92000-ffff888103f92fff, with a lock still held there!
ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0
2 locks held by mount/174:
#0: ffff888103f960e0 (&type->s_umount_key#42/1){+.+.}-{4:4}, at: alloc_super.constprop.0+0x167/0xa40
#1: ffff888103f920b0 (&tree->tree_lock){+.+.}-{4:4}, at: hfsplus_find_init+0x154/0x1e0
stack backtrace:
CPU: 2 UID: 0 PID: 174 Comm: mount Not tainted 7.0.0-rc3-00016-gb4f0dd314b39 #4 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x82/0xd0
debug_check_no_locks_freed+0x13a/0x180
kfree+0x16b/0x510
? hfsplus_fill_super+0xcb4/0x18a0
hfsplus_fill_super+0xcb4/0x18a0
? __pfx_hfsplus_fill_super+0x10/0x10
? srso_return_thunk+0x5/0x5f
? bdev_open+0x65f/0xc30
? srso_return_thunk+0x5/0x5f
? pointer+0x4ce/0xbf0
? trace_contention_end+0x11c/0x150
? __pfx_pointer+0x10/0x10
? srso_return_thunk+0x5/0x5f
? bdev_open+0x79b/0xc30
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? vsnprintf+0x6da/0x1270
? srso_return_thunk+0x5/0x5f
? __mutex_unlock_slowpath+0x157/0x740
? __pfx_vsnprintf+0x10/0x10
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? mark_held_locks+0x49/0x80
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? irqentry_exit+0x17b/0x5e0
? trace_irq_disable.constprop.0+0x116/0x150
? __pfx_hfsplus_fill_super+0x10/0x10
? __pfx_hfsplus_fill_super+0x10/0x10
get_tree_bdev_flags+0x302/0x580
? __pfx_get_tree_bdev_flags+0x10/0x10
? vfs_parse_fs_qstr+0x129/0x1a0
? __pfx_vfs_parse_fs_qstr+0x3/0x10
vfs_get_tree+0x89/0x320
fc_mount+0x10/0x1d0
path_mount+0x5c5/0x21c0
? __pfx_path_mount+0x10/0x10
? trace_irq_enable.constprop.0+0x116/0x150
? trace_irq_enable.constprop.0+0x116/0x150
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? kmem_cache_free+0x307/0x540
? user_path_at+0x51/0x60
? __x64_sys_mount+0x212/0x280
? srso_return_thunk+0x5/0x5f
__x64_sys_mount+0x212/0x280
? __pfx___x64_sys_mount+0x10/0x10
? srso_return_thunk+0x5/0x5f
? trace_irq_enable.constprop.0+0x116/0x150
? srso_return_thunk+0x5/0x5f
do_syscall_64+0x111/0x680
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ffacad55eae
Code: 48 8b 0d 85 1f 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 8
RSP: 002b
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
lib/scatterlist: fix length calculations in extract_kvec_to_sg
Patch series "Fix bugs in extract_iter_to_sg()", v3.
Fix bugs in the kvec and user variants of extract_iter_to_sg. This series
is growing due to useful remarks made by sashiko.dev.
The main bugs are:
- The length for an sglist entry when extracting from
a kvec can exceed the number of bytes in the page. This
is obviously not intended.
- When extracting a user buffer the sglist is temporarily
used as a scratch buffer for extracted page pointers.
If the sglist already contains some elements this scratch
buffer could overlap with existing entries in the sglist.
The series adds test cases to the kunit_iov_iter test that demonstrate all
of these bugs. Additionally, there is a memory leak fix for the test
itself.
The bugs were orignally introduced into kernel v6.3 where the function
lived in fs/netfs/iterator.c. It was later moved to lib/scatterlist.c in
v6.5. Thus the actual fix is only marked for backports to v6.5+.
This patch (of 5):
When extracting from a kvec to a scatterlist, do not cross page
boundaries. The required length was already calculated but not used as
intended.
Adjust the copied length if the loop runs out of sglist entries without
extracting everything.
While there, return immediately from extract_iter_to_sg if there are no
sglist entries at all.
A subsequent commit will add kunit test cases that demonstrate that the
patch is necessary. |
| A vulnerability has been found in SourceCodester CET Automated Grading System with AI Predictive Analytics 1.0. The impacted element is an unknown function of the file /index.php. The manipulation of the argument action leads to cross site scripting. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was detected in CodeAstro Student Attendance Management System 1.0. Impacted is an unknown function of the file /attendance-php/Admin/createStudents.php. Performing a manipulation of the argument admissionNumber results in sql injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. |
| ** UNSUPPORTED WHEN ASSIGNED ** A command injection vulnerability in the CGI program of Zyxel WRE6505 v2 firmware version V1.00(ABDV.3)C0 could allow an adjacent attacker on the LAN to execute operating system (OS) commands on a vulnerable device by sending a crafted HTTP request. |
| An OS Command Injection vulnerability in Ivanti Sentry before the R10.5.2, R10.6.2 and R10.7.1 versions allows a remote unauthenticated user to achieve root-level remote code execution |
| The Online Scheduling and Appointment Booking System – Bookly plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'bookly-customer-full-name' cookie in versions up to, and including, 27.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires 'Remember personal information in cookies' setting to be enabled (disabled by default). |
| ApostropheCMS is an open-source Node.js content management system. Versions of the @apostrophecms/cli package up to and including 3.6.0 contain a command injection vulnerability in the apos create command. User-supplied input from the password prompt is embedded directly into a shell command without proper sanitization or escaping. This allows execution of arbitrary commands on the host system. As of time of publication, no known patched versions are available. |
| ApostropheCMS is an open-source Node.js content management system. Version 4.29.0 has a stored cross-site scripting vulnerability in the image widget functionality. A user with the Editor role can configure an image widget link to use a javascript: URL payload. Because editors have permission to publish pages, the malicious widget can be published to the live site. When another user, including an administrator or public visitor, clicks the affected image/link, arbitrary JavaScript executes in the victim’s browser. As of time of publication, no known patched versions are available. |
| ApostropheCMS is an open-source Node.js content management system. Versions up to and including 4.29.0 are vulnerable to stored cross-site scripting via unsanitized user display name in draft version tooltip. As of time of publication, no known patched versions are available. |
| ApostropheCMS is an open-source Node.js content management system. Versions up to and including 1.4.2 of the `@apostrophecms/seo` package injects the Google Analytics Tracking ID (`seoGoogleTrackingId`) and Google Tag Manager ID (`seoGoogleTagManager`) directly into `<script>` tag bodies using JavaScript template literals without any sanitization or validation. Any user with editor-level access (the default role for content managers) can set these fields to a malicious value, resulting in stored XSS that executes on every page for every visitor of the site. As of time of publication, no known patched versions are available. |
| Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. From version 1.4.0 to before version 2.0.8, a RoleMember user can create a scheduled cron task with Cover=CronCoverAll, Servers=[] and an arbitrary Command. At every tick of the scheduler, the dashboard pushes that command to every server in the global ServerShared map — including servers that belong to other tenants (admin's servers, other members' servers). Each agent runs the command and returns the output, which is then sent to the attacker's own NotificationGroup → attacker-controlled webhook. This issue has been patched in version 2.0.8. |
| Nezha Monitoring is a self-hostable, lightweight, servers and websites monitoring and O&M tool. From version 1.0.0 to before version 2.2.0, the Nezha dashboard exposes two endpoints that create long-lived WebSocket streams to monitored agents: POST /api/v1/terminal → createTerminal() (terminal.go:27-67) and POST /api/v1/file → createFM() (fm.go:28-67). Both call rpc.NezhaHandlerSingleton.CreateStream(streamId, ...) which inserts a new ioStreamContext into an unbounded map[string]*ioStreamContext (s.ioStreams in io_stream.go:59-67). There is no per-user rate limit, no global semaphore, and no per-server connection cap. This issue has been patched in version 2.2.0. |
| Software installed and run as a non-privileged user may conduct intentional GPU sparse memory API calls to cause out of bounds write in the kernel.
The product incorrectly indexes internal state when performing sparse allocation remapping. |
| A web page that contains unusual WebGPU content loaded into the GPU GLES render process and can trigger an out-of-bound write in the GPU user-space driver, leading to memory corruption and possible browser/GPU process crash.
The software computes a required memory size from untrusted input, but integer overflow can produce a value smaller than needed. Subsequent write operations may then occur past the intended memory boundary, corrupting adjacent memory and causing process instability or termination. |
