Search vulnerabilities

Results 1,958

CVE-2026-99289

ksmbd: fix app-instance non-durable supersede session UAF

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix app-instance non-durable supersede session UAF ksmbd_close_fd_app_instance_id() supersedes a prior open that has the same AppInstanceId. It reaches that open's session through opinfo->sess. This pointer is not refcounted. Session teardown detaches durable handles before it frees the session. It does not detach a non-durable open. That open still points at the session through opinfo->sess after the session is freed. Another session can supersede the open at the same time. The supersede then takes a write lock through the stale pointer, in the freed session's file table. BUG: KASAN: slab-use-after-free in _raw_write_lock+0x71/0xd0 Call Trace: _raw_write_lock+0x71/0xd0 ksmbd_close_fd_app_instance_id+0xd9/0x670 [ksmbd] smb2_open+0x3e10/0xd910 [ksmbd] Freed by task 212: ksmbd_session_destroy+0x38d/0x480 [ksmbd] Fix this by looking the session up by opinfo->session_id. The lookup returns a reference, as smb2_break_collect_channels() does. Recheck that opinfo->sess still points at it before using it. Do the lookup without m_lock held. destroy_previous_session() takes m_lock under the session table lock, and taking them in the other order here would deadlock.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99305

fbdev: udlfb: don't rebuild the mode list while the framebuffer is in use

In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: don't rebuild the mode list while the framebuffer is in use dlfb_setup_modes() frees info->modelist with fb_destroy_modelist() and rebuilds it, but fbcon holds raw pointers into that list in fb_display[i].mode and nothing un-publishes them the way do_unregister_framebuffer() and store_modes() do with fbcon_delete_modelist(). The function does refuse to install a new mode while the framebuffer has users (dlfb->fb_count != 0), but only after the list is already destroyed. Reached from the 0666 "edid" sysfs attribute, an unprivileged write to /sys/class/graphics/fb0/edid therefore fails with -EINVAL and still leaves every fb_display[i].mode dangling; the next console switch reads the freed fb_videomode in fb_videomode_to_var(). Test fb_count before touching the list. fbcon takes a reference through fbcon_open(), so that condition covers exactly the states in which fb_display[] points into the list, and the errno returned to userspace is unchanged. BUG: KASAN: slab-use-after-free in fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905) Read of size 4 at addr ffff8880107b449c by task kworker/1:1/47 Workqueue: events console_callback Call Trace: fb_videomode_to_var (drivers/video/fbdev/core/modedb.c:905) display_to_var (drivers/video/fbdev/core/fbcon.c:998) fbcon_switch (drivers/video/fbdev/core/fbcon.c:2182) redraw_screen (drivers/tty/vt/vt.c:994) complete_change_console (drivers/tty/vt/vt_ioctl.c:1141) console_callback (drivers/tty/vt/vt.c:3358) process_one_work (kernel/workqueue.c:3396) worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) ... The buggy address is located 28 bytes inside of freed 96-byte region [ffff8880107b4480, ffff8880107b44e0)

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99290

ksmbd: fix use-after-free after a failed durable reconnect

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free after a failed durable reconnect ksmbd_reopen_durable_fd() republishes a detached durable handle in the reconnecting session's file table and takes no reference for that entry. If smb2_open() then fails, cleanup relies on the final ksmbd_fd_put() to remove the volatile id. Two reconnects of the same handle can both take a lookup reference before either attaches it. If the one that reopens first then fails and drops its references first, the other request makes the final put through ksmbd_put_durable_fd(). That frees the handle without removing the first session's table entry, so tearing that session down writes to freed memory. BUG: KASAN: slab-use-after-free in __close_file_table_ids+0x14d/0x740 [ksmbd] Call Trace: __close_file_table_ids+0x14d/0x740 [ksmbd] ksmbd_destroy_file_table+0x76/0x100 [ksmbd] ksmbd_session_destroy+0xf8/0x480 [ksmbd] ksmbd_dispose_sessions+0x13e/0x200 [ksmbd] ksmbd_conn_sessions_cleanup+0x4c3/0x6d0 [ksmbd] Freed by task 1030: __ksmbd_close_fd+0x97d/0x1000 [ksmbd] smb2_open+0x14eb/0xd9f0 [ksmbd] Commit 3515503322f4 ("ksmbd: fix durable reconnect error path file lifetime") handles a final put made by the reconnecting request, but not one made by another holder. Remove the volatile id under the file-table lock on this error path, before the references are dropped, as ksmbd_close_fd() does on the request_open path just above. Removal then no longer depends on which holder makes the final put. The stale comment in the reconnect cleanup is updated to match. A successful reconnect is unchanged.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99295

smb: client: stop processing a read response after a receive error

In the Linux kernel, the following vulnerability has been resolved: smb: client: stop processing a read response after a receive error cifs_read_iter_from_socket() may call cifs_reconnect() before returning an error. The reconnect path aborts pending mids and invokes their callbacks. The callback can then release the cifs_io_subrequest containing rdata. cifs_readv_receive() nevertheless continues after a negative return and may dereference rdata in cifs_readv_discard(). KASAN reports the resulting UAF: BUG: KASAN: slab-use-after-free in cifs_readv_receive Read of size 4 by task cifsd cifs_readv_receive (fs/smb/client/transport.c:1284) cifs_demultiplex_thread (fs/smb/client/connect.c:1355) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) Freed by task 148: netfs_put_subrequest (fs/netfs/objects.c:267) netfs_read_collection (fs/netfs/read_collect.c:460) netfs_wait_for_in_progress (fs/netfs/misc.c:462) Return the socket error immediately, as this path did before the iterator conversion. This also avoids adding a negative length to total_read.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99804

io_uring/io-wq: save worker type before dropping its reference

In the Linux kernel, the following vulnerability has been resolved: io_uring/io-wq: save worker type before dropping its reference io_wq_cancel_tw_create() inspects cb->func after calling io_worker_cancel_cb(). For an existing worker, that call can drop the last worker reference and wake io_worker_exit(). If the canceling task is preempted, the worker can be unlinked and freed by kfree_rcu() before the callback function is inspected. KASAN reports a slab-use-after-free read in this path. Save whether the callback belongs to an unpublished continuation worker while its reference is still held, then use the saved result for the conditional free. This preserves the existing accounting and frees only the worker allocated for the canceled continuation.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99792

smb/server: prevent file publication after tree disconnect

In the Linux kernel, the following vulnerability has been resolved: smb/server: prevent file publication after tree disconnect TREE_DISCONNECT closes the tree's published file handles before marking and removing the tree connection. A concurrent CREATE that already holds a tree reference can therefore publish its file after the close pass. When CREATE drops its reference, the tree can be freed while the published file still points to it. Mark and remove the tree connection before closing its files, and serialize both new-open and durable-reconnect volatile ID publication with that state transition. An opener is then either published in time for the close pass or rejected after disconnect with STATUS_NETWORK_NAME_DELETED. Keep a tree reference while a file carries its tree pointer. This protects asynchronous users that can defer the file's final destruction past tree disconnect. The close pass can race the successful FP_NEW to FP_INITED transition. Take the opening request's file reference atomically with that transition. This keeps the file alive until request completion even if teardown removes the ID immediately. BUG: KASAN: slab-use-after-free in proc_show_files (fs/smb/server/vfs_cache.c:126) Read of size 4 at addr ff11000101540f80 by task poc/153 Call Trace: proc_show_files (fs/smb/server/vfs_cache.c:126) seq_read_iter (fs/seq_file.c:231) proc_reg_read_iter (fs/proc/inode.c:299) vfs_read (fs/read_write.c:574) ksys_read (fs/read_write.c:716) do_syscall_64 (arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) Allocated by: ksmbd_tree_conn_connect (fs/smb/server/mgmt/tree_connect.c:35) smb2_tree_connect (fs/smb/server/smb2pdu.c:2819) handle_ksmbd_work (fs/smb/server/server.c:368) Freed by: kfree (mm/slub.c:6801) handle_ksmbd_work (fs/smb/server/server.c:332)

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99773

drm/drm_crtc: ensure dma_fence_ops remain valid during device unbind

In the Linux kernel, the following vulnerability has been resolved: drm/drm_crtc: ensure dma_fence_ops remain valid during device unbind In [1], sashiko reported the following issue: === snip === Looking at how these fences are managed, drm_crtc_create_fence() creates a dma_fence without taking a reference to the drm_device or drm_crtc. Because the sync_file framework exposes this fence to userspace, the fence can outlive the CRTC. The dma_fence contract requires that data accessed by dma_fence_ops (like get_driver_name) must remain valid for an RCU grace period after the fence is signaled. However, drm_crtc_cleanup() and the subsequent freeing of the device do not wait for an RCU grace period via synchronize_rcu(). If userspace calls ioctl(SYNC_IOC_FILE_INFO) concurrently with a device hot-unplug: CPU1 (Userspace) sync_file_get_name() ops = rcu_dereference(fence->ops); if (!dma_fence_test_signaled_flag()) // Preempted or delayed here CPU2 (Driver Teardown) Signals the fence (setting fence->ops = NULL) Destroys and frees the CRTC without waiting for an RCU grace period CPU1 (Resumes) ops->get_driver_name(fence) -> drm_crtc_fence_get_driver_name() crtc = fence_to_crtc(fence); // Casts to the freed CRTC return crtc->dev->driver->name; // Use-after-free ... Does the CRTC or DRM device need to be kept alive for the RCU grace period, or should the fence hold a proper reference to prevent the use-after-free when get_driver_name() and get_timeline_name() access the freed CRTC structure? === snap === I believe this to be a correct observation and this patch implements the suggestion of waiting for an RCU grace period before proceeding with destruction of the drm_crtc, so that get_driver_name() and get_timeline_name() can still work.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99761

batman-adv: stop originator purge worker before freeing TT

In the Linux kernel, the following vulnerability has been resolved: batman-adv: stop originator purge worker before freeing TT batadv_mesh_free() releases the translation tables via batadv_tt_free() before batadv_originator_free() stops orig_work. The purge worker can therefore still run while the TT is torn down. When an originator times out, batadv_purge_orig_ref() calls batadv_tt_global_del_orig(), which loads tt.global_hash and walks all buckets while taking their locks: CPU0 CPU1 batadv_tt_free() batadv_purge_orig() batadv_tt_global_del_orig() hash = ...tt.global_hash; batadv_tt_global_table_free() batadv_hash_destroy(hash); spin_lock_bh(&hash->list_locks[i]); Disable orig_work at the beginning of batadv_mesh_free(), directly after the mesh was marked as deactivating. The second disable_delayed_work_sync() in batadv_originator_free() is harmless because it is free'd anyway.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99730

mm/filemap: finish fault cleanup before dropping the fault lock

In the Linux kernel, the following vulnerability has been resolved: mm/filemap: finish fault cleanup before dropping the fault lock On a retried fault, a fatal signal interrupting the folio lock wait makes lock_folio_maybe_drop_mmap() drop the fault lock without pinning the file. However, filemap_fault() may still need to release mapping->invalidate_lock. A concurrent munmap() can release the last file reference and free the mapping before that unlock. Defer dropping the fault lock to filemap_fault()'s retry cleanup, after releasing invalidate_lock. If the fault lock was already dropped for I/O, release the existing file reference instead. Keep the fault lock held for FAULT_FLAG_RETRY_NOWAIT as before.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99690

ocfs2: cache the mount context for dentry lock callbacks

In the Linux kernel, the following vulnerability has been resolved: ocfs2: cache the mount context for dentry lock callbacks ocfs2_drop_dentry_lock() drops the inode reference before releasing the DENTRY lock. This lets inode eviction release the local inode and open locks before a remote unlink can proceed past the DENTRY lock. A DLM callback can still arrive before the DENTRY lock has been dropped. ocfs2_get_dentry_osb() obtains the mount context through dl_inode->i_sb, which can access a freed inode when the downconvert thread drops the last inode reference in its post-unlock callback: Downconvert thread DLM callback thread ------------------ ------------------- ocfs2_process_blocked_lock() ocfs2_dentry_post_unlock() ocfs2_dentry_lock_put() ocfs2_drop_dentry_lock() iput(dl->dl_inode) [inode reclaimed after RCU] ocfs2_blocking_ast() ocfs2_get_dentry_osb() dl->dl_inode->i_sb ocfs2_simple_drop_lockres() Store the mount context in the DENTRY lock resource's l_priv field and use the default mount-context lookup. Recover the containing dentry lock with container_of(), as already done for refcount locks, and remove ocfs2_get_dentry_osb(). ocfs2_dismount_volume() shuts down the DLM before freeing the mount context, so callbacks can use it without accessing the inode. Preserve the existing iput-before-unlock order to avoid delaying local inode and open lock release until after the DENTRY lock is released.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99688

net/sched: sch_qfq: prevent aggregate self-replacement

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_qfq: prevent aggregate self-replacement qfq_change_class() snapshots the current aggregate settings while holding the qdisc tree lock, but drops the lock before selecting the destination aggregate. During that gap, qfq_enqueue() can move the class to an aggregate matching the requested settings. When qfq_change_class() resumes, qfq_find_agg() then returns cl->agg. If it is a singleton, qfq_deact_rm_from_agg() frees the aggregate before qfq_add_to_agg() immediately accesses the same pointer, causing a use-after-free. While holding the tree lock, skip the replacement when the destination is already the current aggregate. Any estimator replacement has already completed, so the class change can finish normally.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99685

iommu/virtio: Reset device before deleting virtqueues on probe failure

In the Linux kernel, the following vulnerability has been resolved: iommu/virtio: Reset device before deleting virtqueues on probe failure viommu_probe() marks the device DRIVER_OK before populating the event virtqueue and registering the IOMMU device in sysfs. viommu_fill_evtq() hands the device a set of device-writable buffers through virtqueue_add_inbuf(), so from that point on the device may write into them and into the rings. If either step fails, the error path deletes the virtqueues without resetting the device first. The event buffers are allocated with devm_kmalloc_array() and are released as probe unwinds, so the device can go on writing to memory that has been freed. Reset the device before deleting the virtqueues, the way viommu_remove() already does.

CVSS 3.1 · 8.4 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99672

can: protect the receive lists with a per-device lock

In the Linux kernel, the following vulnerability has been resolved: can: protect the receive lists with a per-device lock The receive lists of a CAN device are located in the device's can_ml_priv and travel with the device when it is moved to another network namespace. But they are protected by the per-netns rcvlists_lock. So can_rx_unregister() needs dev_net(dev) to pick the right lock and silently returns when the passed namespace does not match dev_net(dev) anymore. isotp_release() and bcm_release() leave their notifier list before they take any lock that serializes against the netdev notifier, which runs under RTNL. When the bound device is moved to another namespace in this window, the notifier skips the socket and the release path has to remove the filters itself. isotp_release() passes the socket's namespace, which does not match dev_net(dev) anymore. bcm_rx_unreg() passes dev_net(dev), which can_rx_unregister() reads again for its check, so a namespace change between both reads makes the check fail as well. In both cases can_rx_unregister() silently returns. As can_rx_register() stores rcv->sk without a reference, the remaining receivers point to the freed socket (isotp) or the freed op (bcm): BUG: KASAN: use-after-free in isotp_rcv+0x1570/0x24d0 Read of size 1 at addr ffff888118130552 by task isotp_ns_uaf/578 can_rcv_filter+0x4af/0x8c0 can_receive+0x28d/0x3c0 can_rcv+0x2a9/0x310 __netif_receive_skb_one_core+0x21a/0x260 process_backlog+0x210/0x760 Besides this, the lists of a device are protected by the rcvlists_lock of the namespace that is passed in. Callers which pass dev_net(dev) read it at different times, so the same lists may be modified under the locks of different namespaces while the device is moved. Taking RTNL in these release paths is no option: raw_bind(), raw_setsockopt() and raw_release() already hold RTNL while adding and removing up to CAN_RAW_FILTER_MAX filters per socket, which unprivileged users can trigger repeatedly and which makes RTNL a global bottleneck. Instead fix the root cause and add a spinlock to struct can_dev_rcv_lists, which protects the receive lists of a CAN device or the 'any' CAN device lists of a namespace. It is initialized in can_set_ml_priv(), which is used by all CAN network devices. With this, can_rx_unregister() finds the subscription independently of the current namespace of the device. The protocols keep the device valid with their tracked references. The per-netns rcvlists_lock only protects the receive list statistics anymore, and CAN_RAW, CAN_BCM and CAN_ISOTP pass the namespace that has been used for can_rx_register(). So isotp_release() and bcm_release() now remove their filters correctly without RTNL, and raw_release(), raw_setsockopt(), raw_bind() and isotp_bind() do not need RTNL anymore and add and remove their filters under lock_sock(). To serialize bind() with NETDEV_UNREGISTER, bind() publishes the device inside the RCU section of its lookup, and raw_notify() and isotp_notify() recheck the bound device under lock_sock(). As RTNL does not keep NETDEV_DOWN out of bind() anymore, bind() checks IFF_UP after publishing the bound device, with a barrier pair against raw_notify() and isotp_notify(), so a down transition during bind() is still reported with ENETDOWN.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99650

mm/ksm: fix use of a freed anon_vma at swap-in

In the Linux kernel, the following vulnerability has been resolved: mm/ksm: fix use of a freed anon_vma at swap-in A folio read from a swap slot previously shared by KSM can remain in the swap cache after the process that first mapped it exits. Its anon_vma can then be freed, so ksm_might_need_to_copy() must not dereference it to compare roots. Doing so can result in some false-positives, resulting in the reverse mapping missing the new folio mapping, preventing migration and reclaim. SLAB_TYPESAFE_BY_RCU allows individual anon_vma objects to be reused immediately after freeing. A stale pointer can then refer to another anon_vma whose root matches, even though the target VMA is not linked to that anon_vma. Move the anonymous rmap compatibility checks into folio_anon_rmap_compatible(). Keep the page-index check and compare the folio's anon_vma pointer against the VMA's own anon_vma and root first. If neither matches, bite the bullet and walk the VMA's anon_vma_chain. The VMA keeps these anon_vmas alive, and finding a match guarantees that reverse mapping can find the new mapping. Lorenzo Stoakes says in a private discussion: "This isn't quite equivalent to the existing check. Every anon_vma in an anon_vma_chain shares the same root, but if you split a VMA then fork both of them like this: VMA A / \ <split> VMA B VMA C \ / root <- anon_vma 1 ----^ ^---- <fork> / parent \ anon_vma 2 anon_vma 3 | | VMA D VMA E VMA's D and E both get their own new anon_vma's such that: VMA D: anon_vma 2 -> anon_vma 1 -> root VMA E: anon_vma 3 -> anon_vma 1 -> root And if you found a folio referencing anon_vma 2, the existing check: anon_vma->root == vma->anon-vma->root Would be true for VMA's B, C, D & E. However after your change it'd be true for VMA D only, as it's the only one with anon_vma 2 in its anon_vma_chain. Whether or not that could actually happen in practice... 🙂 I don't know. [...] after your change it'd be true for VMA D only, as it's the only one with anon_vma 2 in its anon_vma_chain. [...] I would [...] say that you are making the test stricter but more correct. " If this affects performance when KSM was never even involved, we could just track whether KSM ever merged anything and just skip these checks. There isn't really a lot we can do otherwise: for mapped folios we might be able to use folio_get_anon_vma(), but for unmapped folios there really is no easy way to see if the anon_vma is still valid. Document the (confusing) lifetime requirements of folio_anon_vma().

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99634

mptcp: do not use Fast Open on MP_JOIN subflows

In the Linux kernel, the following vulnerability has been resolved: mptcp: do not use Fast Open on MP_JOIN subflows tcp_fastopen_create_child() hands the SYN packet itself to subflow_syn_recv_sock(). For an MP_JOIN request this takes the fatal fallback: the cloned child is destroyed and handed back with drop_req flagged, but tcp_fastopen_create_child() does not check the flag and queues it, so accept() can expose the freed child. MP_JOIN cannot use Fast Open: data on a subflow requires the completed HMAC exchange (RFC 8684, sec. 3.2). Refuse it (only the TFO path passes a SYN skb here) and let tcp_conn_request() fall back to the regular MP_JOIN handshake; also strip the Fast Open cookie from MP_JOIN SYN/ACKs. [ Moving code to avoid clearing TS and consolidating checks. ]

CVSS 3.1 · 9.8 Critical EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99603

mptcp: pm: kernel: use RCU to free endpoint listeners

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: kernel: use RCU to free endpoint listeners mptcp_pm_nl_create_listen_socket() starts the TCP listener directly instead of going through mptcp_listen(). It consequently misses setting SOCK_RCU_FREE on the parent MPTCP socket. tcp_child_process() can invoke the listener's subflow_data_ready() callback without holding the MPTCP parent lock or a reference to the parent. An authenticated MP_JOIN racing with endpoint teardown can therefore access the parent after its last reference has been dropped. The ADD_ADDR error path can also close an already published listener. Set SOCK_RCU_FREE before __inet_listen_sk() publishes the TCP listener, matching mptcp_listen(). This protects the parent on every subsequent close path, including a failed endpoint addition.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99582

sctp: re-point retained control chunks on association migration

In the Linux kernel, the following vulnerability has been resolved: sctp: re-point retained control chunks on association migration sctp_sock_migrate() transfers DATA chunk ownership but leaves retained control chunks pointing at the old socket. A later retransmission can therefore access the socket after it has been freed. Extend the migration walk to cover retained control chunks and use sctp_control_set_owner_w() to assign their new owner. Reuse the DATA ownership check so each chunk is processed once per pass, even when it is reachable through multiple lists or retained pointers. Preserve a control chunk's existing authentication key across migration so its final release can still generate SCTP_AUTH_FREE_KEY when needed.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99556

ksmbd: serialize directory emptiness checks with readdir

In the Linux kernel, the following vulnerability has been resolved: ksmbd: serialize directory emptiness checks with readdir SMB2 QUERY_DIRECTORY holds fp->readdir_lock while it calls iterate_dir() on fp->filp. An SMB2 SET_INFO request with FILE_DISPOSITION_INFORMATION can resolve the same FileId and call ksmbd_vfs_empty_dir() on the same filp without that lock. iterate_dir()'s inode read lock permits concurrent readers and does not serialize per-file iterator state. ext4 stores its dx readdir cursor and fname RB tree in file->private_data. Concurrent reset or refill can therefore free a fname node while the other worker still traverses it or retains its RB-tree link, resulting in use-after-free accesses. An authenticated SMB client with list and delete rights on a directory in a writable KSMBD share backed by ext4 can trigger this when the directory takes the dx readdir path. The client overlaps an SMB2 QUERY_DIRECTORY request with an SMB2 SET_INFO request carrying FILE_DISPOSITION_INFORMATION on one live FileId. In one x86_64 SMP KASAN multi-shot guest using ksmbd-for-next at 171df27077fb, the unmodified kernel reported a cross-worker use-after-free before a panic. The first report's access and free stacks show the two request paths directly (trimmed): BUG: KASAN: slab-use-after-free in ext4_htree_store_dirent+0x488/0x550 Read of size 8 by task kworker/2:0/29 Workqueue: ksmbd-io handle_ksmbd_work Call Trace: ext4_htree_store_dirent+0x488/0x550 htree_dirblock_to_tree+0x535/0x990 ext4_htree_fill_tree+0x319/0xba0 ext4_readdir+0x175a/0x2f40 iterate_dir+0x1b6/0x630 smb2_query_dir+0x1003/0x1cc0 Freed by task 279: free_rb_tree_fname+0x67/0xc0 ext4_readdir+0x13a9/0x2f40 iterate_dir+0x1b6/0x630 ksmbd_vfs_empty_dir+0xa2/0x100 smb2_set_info+0x2ffa/0x45d0 Take fp->readdir_lock across the entire emptiness check. This places both iterators over that handle's filp in the same lock domain while preserving the disposition status handling. The exact code change completed a warning-free x86_64 KASAN bzImage build. Tracing three request pairs showed that the two iterate_dir() calls no longer overlapped and the expected statuses were preserved. A further 1,600 reproducer iterations completed with expected statuses and no KASAN report, Oops, or panic. The reproducer and complete guest configuration are available privately to maintainers on request.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99546

net/sched: cls_flower: avoid stale mask references after delete

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_flower: avoid stale mask references after delete Flower releases a mask reference when a filter is removed from the classifier. The filter object can remain alive while dump, walk, or hardware reoffload paths hold a reference to it. Those paths can then dereference f->mask after the mask has already been released. Keep the mask reference until the filter reference count reaches zero. Release the mask synchronously from the final __fl_put() while the caller still holds the tcf_proto reference, and leave the existing RCU work to free the mask. This keeps the mask available to every reader that still holds the filter. The filter is still removed from the classifier indexes immediately. Therefore, a deleted filter can temporarily retain an otherwise empty mask; fl_delete() uses the handle IDR, rather than the mask list, to determine whether the classifier has become empty. Failed mask assignment can leave fnew->mask as an error or borrowed pointer without an owned mask reference. Clear it before the common failure path so the final put cannot release an unowned reference. This fix does not add fields, snapshots, or per-filter memory.

CVSS 3.1 · 7.1 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99540

ksmbd: fix parent dentry lifetime in directory enumeration

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix parent dentry lifetime in directory enumeration ksmbd_populate_dot_dotdot_entries() builds the ".." entry from the open directory's d_parent and passes that pointer to ksmbd_vfs_fill_dentry_attrs() without taking a reference. That pointer is only valid while the directory stays under this parent. If a concurrent rename moves the directory elsewhere, the old parent loses its last reference; a following rmdir then turns it into a negative dentry with d_inode cleared, and after the RCU grace period the dentry itself is freed. The worker still holds the raw pointer and dereferences d_inode through vfs_getattr() and vfs_getxattr(). A remote SMB client, authenticated or guest, triggers this by listing a directory while that directory is moved under a new parent and the old parent is deleted. It can be done by the client itself with write access or by other concurrent writers, triggering null-ptr-deref and slab-use-after-free on a KASAN build. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: ksmbd-io handle_ksmbd_work RIP: 0010:xattr_permission+0x9d/0x160 Call Trace: vfs_getxattr+0x9c/0x1b0 ksmbd_vfs_getxattr+0x82/0x100 ksmbd_vfs_get_dos_attrib_xattr+0x7f/0x130 ksmbd_vfs_fill_dentry_attrs+0x435/0x650 ksmbd_populate_dot_dotdot_entries+0x25e/0x630 smb2_query_dir+0xcf9/0x1a20 handle_ksmbd_work+0x5f1/0x1c80 process_one_work+0x90b/0x19d0 Fix by using the dentry reference counting APIs: take the parent with dget_parent(), take a matching dget() on ".", and dput() the dentry once ksmbd_vfs_fill_dentry_attrs() has returned or the pattern does not match.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products