Total
110 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-52485 | 2024-11-13 | 4.4 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Wake DMCUB before sending a command [Why] We can hang in place trying to send commands when the DMCUB isn't powered on. [How] For functions that execute within a DC context or DC lock we can wrap the direct calls to dm_execute_dmub_cmd/list with code that exits idle power optimizations and reallows once we're done with the command submission on success. For DM direct submissions the DM will need to manage the enter/exit sequencing manually. We cannot invoke a DMCUB command directly within the DM execution helper or we can deadlock. | ||||
| CVE-2024-26755 | 2024-11-08 | 5.3 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: md: Don't suspend the array for interrupted reshape md_start_sync() will suspend the array if there are spares that can be added or removed from conf, however, if reshape is still in progress, this won't happen at all or data will be corrupted(remove_and_add_spares won't be called from md_choose_sync_action for reshape), hence there is no need to suspend the array if reshape is not done yet. Meanwhile, there is a potential deadlock for raid456: 1) reshape is interrupted; 2) set one of the disk WantReplacement, and add a new disk to the array, however, recovery won't start until the reshape is finished; 3) then issue an IO across reshpae position, this IO will wait for reshape to make progress; 4) continue to reshape, then md_start_sync() found there is a spare disk that can be added to conf, mddev_suspend() is called; Step 4 and step 3 is waiting for each other, deadlock triggered. Noted this problem is found by code review, and it's not reporduced yet. Fix this porblem by don't suspend the array for interrupted reshape, this is safe because conf won't be changed until reshape is done. | ||||
| CVE-2021-1622 | 1 Cisco | 13 7600 Router, Asr 901-12c-f-d, Asr 901-12c-ft-d and 10 more | 2024-11-07 | 8.6 High |
| A vulnerability in the Common Open Policy Service (COPS) of Cisco IOS XE Software for Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, remote attacker to cause resource exhaustion, resulting in a denial of service (DoS) condition. This vulnerability is due to a deadlock condition in the code when processing COPS packets under certain conditions. An attacker could exploit this vulnerability by sending COPS packets with high burst rates to an affected device. A successful exploit could allow the attacker to cause the CPU to consume excessive resources, which prevents other control plane processes from obtaining resources and results in a DoS. | ||||
| CVE-2023-3436 | 1 Xpdfreader | 1 Xpdf | 2024-11-07 | 3.3 Low |
| Xpdf 4.04 will deadlock on a PDF object stream whose "Length" field is itself in another object stream. | ||||
| CVE-2021-47225 | 2024-11-07 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: mac80211: fix deadlock in AP/VLAN handling Syzbot reports that when you have AP_VLAN interfaces that are up and close the AP interface they belong to, we get a deadlock. No surprise - since we dev_close() them with the wiphy mutex held, which goes back into the netdev notifier in cfg80211 and tries to acquire the wiphy mutex there. To fix this, we need to do two things: 1) prevent changing iftype while AP_VLANs are up, we can't easily fix this case since cfg80211 already calls us with the wiphy mutex held, but change_interface() is relatively rare in drivers anyway, so changing iftype isn't used much (and userspace has to fall back to down/change/up anyway) 2) pull the dev_close() loop over VLANs out of the wiphy mutex section in the normal stop case | ||||
| CVE-2024-36944 | 1 Redhat | 1 Enterprise Linux | 2024-11-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Reapply "drm/qxl: simplify qxl_fence_wait" This reverts commit 07ed11afb68d94eadd4ffc082b97c2331307c5ea. Stephen Rostedt reports: "I went to run my tests on my VMs and the tests hung on boot up. Unfortunately, the most I ever got out was: [ 93.607888] Testing event system initcall: OK [ 93.667730] Running tests on all trace events: [ 93.669757] Testing all events: OK [ 95.631064] ------------[ cut here ]------------ Timed out after 60 seconds" and further debugging points to a possible circular locking dependency between the console_owner locking and the worker pool locking. Reverting the commit allows Steve's VM to boot to completion again. [ This may obviously result in the "[TTM] Buffer eviction failed" messages again, which was the reason for that original revert. But at this point this seems preferable to a non-booting system... ] | ||||
| CVE-2023-52699 | 2024-11-06 | 5.3 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: sysv: don't call sb_bread() with pointers_lock held syzbot is reporting sleep in atomic context in SysV filesystem [1], for sb_bread() is called with rw_spinlock held. A "write_lock(&pointers_lock) => read_lock(&pointers_lock) deadlock" bug and a "sb_bread() with write_lock(&pointers_lock)" bug were introduced by "Replace BKL for chain locking with sysvfs-private rwlock" in Linux 2.5.12. Then, "[PATCH] err1-40: sysvfs locking fix" in Linux 2.6.8 fixed the former bug by moving pointers_lock lock to the callers, but instead introduced a "sb_bread() with read_lock(&pointers_lock)" bug (which made this problem easier to hit). Al Viro suggested that why not to do like get_branch()/get_block()/ find_shared() in Minix filesystem does. And doing like that is almost a revert of "[PATCH] err1-40: sysvfs locking fix" except that get_branch() from with find_shared() is called without write_lock(&pointers_lock). | ||||
| CVE-2024-45003 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfs: Don't evict inode under the inode lru traversing context The inode reclaiming process(See function prune_icache_sb) collects all reclaimable inodes and mark them with I_FREEING flag at first, at that time, other processes will be stuck if they try getting these inodes (See function find_inode_fast), then the reclaiming process destroy the inodes by function dispose_list(). Some filesystems(eg. ext4 with ea_inode feature, ubifs with xattr) may do inode lookup in the inode evicting callback function, if the inode lookup is operated under the inode lru traversing context, deadlock problems may happen. Case 1: In function ext4_evict_inode(), the ea inode lookup could happen if ea_inode feature is enabled, the lookup process will be stuck under the evicting context like this: 1. File A has inode i_reg and an ea inode i_ea 2. getfattr(A, xattr_buf) // i_ea is added into lru // lru->i_ea 3. Then, following three processes running like this: PA PB echo 2 > /proc/sys/vm/drop_caches shrink_slab prune_dcache_sb // i_reg is added into lru, lru->i_ea->i_reg prune_icache_sb list_lru_walk_one inode_lru_isolate i_ea->i_state |= I_FREEING // set inode state inode_lru_isolate __iget(i_reg) spin_unlock(&i_reg->i_lock) spin_unlock(lru_lock) rm file A i_reg->nlink = 0 iput(i_reg) // i_reg->nlink is 0, do evict ext4_evict_inode ext4_xattr_delete_inode ext4_xattr_inode_dec_ref_all ext4_xattr_inode_iget ext4_iget(i_ea->i_ino) iget_locked find_inode_fast __wait_on_freeing_inode(i_ea) ----→ AA deadlock dispose_list // cannot be executed by prune_icache_sb wake_up_bit(&i_ea->i_state) Case 2: In deleted inode writing function ubifs_jnl_write_inode(), file deleting process holds BASEHD's wbuf->io_mutex while getting the xattr inode, which could race with inode reclaiming process(The reclaiming process could try locking BASEHD's wbuf->io_mutex in inode evicting function), then an ABBA deadlock problem would happen as following: 1. File A has inode ia and a xattr(with inode ixa), regular file B has inode ib and a xattr. 2. getfattr(A, xattr_buf) // ixa is added into lru // lru->ixa 3. Then, following three processes running like this: PA PB PC echo 2 > /proc/sys/vm/drop_caches shrink_slab prune_dcache_sb // ib and ia are added into lru, lru->ixa->ib->ia prune_icache_sb list_lru_walk_one inode_lru_isolate ixa->i_state |= I_FREEING // set inode state inode_lru_isolate __iget(ib) spin_unlock(&ib->i_lock) spin_unlock(lru_lock) rm file B ib->nlink = 0 rm file A iput(ia) ubifs_evict_inode(ia) ubifs_jnl_delete_inode(ia) ubifs_jnl_write_inode(ia) make_reservation(BASEHD) // Lock wbuf->io_mutex ubifs_iget(ixa->i_ino) iget_locked find_inode_fast __wait_on_freeing_inode(ixa) | iput(ib) // ib->nlink is 0, do evict | ubifs_evict_inode | ubifs_jnl_delete_inode(ib) ↓ ubifs_jnl_write_inode ABBA deadlock ←-----make_reservation(BASEHD) dispose_list // cannot be executed by prune_icache_sb wake_up_bit(&ixa->i_state) Fix the possible deadlock by using new inode state flag I_LRU_ISOLATING to pin the inode in memory while inode_lru_isolate( ---truncated--- | ||||
| CVE-2024-26917 | 2024-11-05 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: scsi: Revert "scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock" This reverts commit 1a1975551943f681772720f639ff42fbaa746212. This commit causes interrupts to be lost for FCoE devices, since it changed sping locks from "bh" to "irqsave". Instead, a work queue should be used, and will be addressed in a separate commit. | ||||
| CVE-2024-26781 | 2024-11-05 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix possible deadlock in subflow diag Syzbot and Eric reported a lockdep splat in the subflow diag: WARNING: possible circular locking dependency detected 6.8.0-rc4-syzkaller-00212-g40b9385dd8e6 #0 Not tainted syz-executor.2/24141 is trying to acquire lock: ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline] ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137 but task is already holding lock: ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: inet_diag_dump_icsk+0x39f/0x1f80 net/ipv4/inet_diag.c:1038 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&h->lhash2[i].lock){+.+.}-{2:2}: lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] __inet_hash+0x335/0xbe0 net/ipv4/inet_hashtables.c:743 inet_csk_listen_start+0x23a/0x320 net/ipv4/inet_connection_sock.c:1261 __inet_listen_sk+0x2a2/0x770 net/ipv4/af_inet.c:217 inet_listen+0xa3/0x110 net/ipv4/af_inet.c:239 rds_tcp_listen_init+0x3fd/0x5a0 net/rds/tcp_listen.c:316 rds_tcp_init_net+0x141/0x320 net/rds/tcp.c:577 ops_init+0x352/0x610 net/core/net_namespace.c:136 __register_pernet_operations net/core/net_namespace.c:1214 [inline] register_pernet_operations+0x2cb/0x660 net/core/net_namespace.c:1283 register_pernet_device+0x33/0x80 net/core/net_namespace.c:1370 rds_tcp_init+0x62/0xd0 net/rds/tcp.c:735 do_one_initcall+0x238/0x830 init/main.c:1236 do_initcall_level+0x157/0x210 init/main.c:1298 do_initcalls+0x3f/0x80 init/main.c:1314 kernel_init_freeable+0x42f/0x5d0 init/main.c:1551 kernel_init+0x1d/0x2a0 init/main.c:1441 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242 -> #0 (k-sk_lock-AF_INET6){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 lock_sock_fast include/net/sock.h:1723 [inline] subflow_get_info+0x166/0xd20 net/mptcp/diag.c:28 tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline] tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137 inet_sk_diag_fill+0x10ed/0x1e00 net/ipv4/inet_diag.c:345 inet_diag_dump_icsk+0x55b/0x1f80 net/ipv4/inet_diag.c:1061 __inet_diag_dump+0x211/0x3a0 net/ipv4/inet_diag.c:1263 inet_diag_dump_compat+0x1c1/0x2d0 net/ipv4/inet_diag.c:1371 netlink_dump+0x59b/0xc80 net/netlink/af_netlink.c:2264 __netlink_dump_start+0x5df/0x790 net/netlink/af_netlink.c:2370 netlink_dump_start include/linux/netlink.h:338 [inline] inet_diag_rcv_msg_compat+0x209/0x4c0 net/ipv4/inet_diag.c:1405 sock_diag_rcv_msg+0xe7/0x410 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 As noted by Eric we can break the lock dependency chain avoid dumping ---truncated--- | ||||
| CVE-2024-26722 | 2024-11-05 | 4.4 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work() There is a path in rt5645_jack_detect_work(), where rt5645->jd_mutex is left locked forever. That may lead to deadlock when rt5645_jack_detect_work() is called for the second time. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2024-46868 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire() If the __qcuefi pointer is not set, then in the original code, we would hold onto the lock. That means that if we tried to set it later, then it would cause a deadlock. Drop the lock on the error path. That's what all the callers are expecting. | ||||
| CVE-2024-46867 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/client: fix deadlock in show_meminfo() There is a real deadlock as well as sleeping in atomic() bug in here, if the bo put happens to be the last ref, since bo destruction wants to grab the same spinlock and sleeping locks. Fix that by dropping the ref using xe_bo_put_deferred(), and moving the final commit outside of the lock. Dropping the lock around the put is tricky since the bo can go out of scope and delete itself from the list, making it difficult to navigate to the next list entry. (cherry picked from commit 0083b8e6f11d7662283a267d4ce7c966812ffd8a) | ||||
| CVE-2024-46791 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: mcp251x: fix deadlock if an interrupt occurs during mcp251x_open The mcp251x_hw_wake() function is called with the mpc_lock mutex held and disables the interrupt handler so that no interrupts can be processed while waking the device. If an interrupt has already occurred then waiting for the interrupt handler to complete will deadlock because it will be trying to acquire the same mutex. CPU0 CPU1 ---- ---- mcp251x_open() mutex_lock(&priv->mcp_lock) request_threaded_irq() <interrupt> mcp251x_can_ist() mutex_lock(&priv->mcp_lock) mcp251x_hw_wake() disable_irq() <-- deadlock Use disable_irq_nosync() instead because the interrupt handler does everything while holding the mutex so it doesn't matter if it's still running. | ||||
| CVE-2024-44995 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix a deadlock problem when config TC during resetting When config TC during the reset process, may cause a deadlock, the flow is as below: pf reset start │ ▼ ...... setup tc │ │ ▼ ▼ DOWN: napi_disable() napi_disable()(skip) │ │ │ ▼ ▼ ...... ...... │ │ ▼ │ napi_enable() │ ▼ UINIT: netif_napi_del() │ ▼ ...... │ ▼ INIT: netif_napi_add() │ ▼ ...... global reset start │ │ ▼ ▼ UP: napi_enable()(skip) ...... │ │ ▼ ▼ ...... napi_disable() In reset process, the driver will DOWN the port and then UINIT, in this case, the setup tc process will UP the port before UINIT, so cause the problem. Adds a DOWN process in UINIT to fix it. | ||||
| CVE-2024-44953 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix deadlock during RTC update There is a deadlock when runtime suspend waits for the flush of RTC work, and the RTC work calls ufshcd_rpm_get_sync() to wait for runtime resume. Here is deadlock backtrace: kworker/0:1 D 4892.876354 10 10971 4859 0x4208060 0x8 10 0 120 670730152367 ptr f0ffff80c2e40000 0 1 0x00000001 0x000000ff 0x000000ff 0x000000ff <ffffffee5e71ddb0> __switch_to+0x1a8/0x2d4 <ffffffee5e71e604> __schedule+0x684/0xa98 <ffffffee5e71ea60> schedule+0x48/0xc8 <ffffffee5e725f78> schedule_timeout+0x48/0x170 <ffffffee5e71fb74> do_wait_for_common+0x108/0x1b0 <ffffffee5e71efe0> wait_for_completion+0x44/0x60 <ffffffee5d6de968> __flush_work+0x39c/0x424 <ffffffee5d6decc0> __cancel_work_sync+0xd8/0x208 <ffffffee5d6dee2c> cancel_delayed_work_sync+0x14/0x28 <ffffffee5e2551b8> __ufshcd_wl_suspend+0x19c/0x480 <ffffffee5e255fb8> ufshcd_wl_runtime_suspend+0x3c/0x1d4 <ffffffee5dffd80c> scsi_runtime_suspend+0x78/0xc8 <ffffffee5df93580> __rpm_callback+0x94/0x3e0 <ffffffee5df90b0c> rpm_suspend+0x2d4/0x65c <ffffffee5df91448> __pm_runtime_suspend+0x80/0x114 <ffffffee5dffd95c> scsi_runtime_idle+0x38/0x6c <ffffffee5df912f4> rpm_idle+0x264/0x338 <ffffffee5df90f14> __pm_runtime_idle+0x80/0x110 <ffffffee5e24ce44> ufshcd_rtc_work+0x128/0x1e4 <ffffffee5d6e3a40> process_one_work+0x26c/0x650 <ffffffee5d6e65c8> worker_thread+0x260/0x3d8 <ffffffee5d6edec8> kthread+0x110/0x134 <ffffffee5d616b18> ret_from_fork+0x10/0x20 Skip updating RTC if RPM state is not RPM_ACTIVE. | ||||
| CVE-2024-43863 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix a deadlock in dma buf fence polling Introduce a version of the fence ops that on release doesn't remove the fence from the pending list, and thus doesn't require a lock to fix poll->fence wait->fence unref deadlocks. vmwgfx overwrites the wait callback to iterate over the list of all fences and update their status, to do that it holds a lock to prevent the list modifcations from other threads. The fence destroy callback both deletes the fence and removes it from the list of pending fences, for which it holds a lock. dma buf polling cb unrefs a fence after it's been signaled: so the poll calls the wait, which signals the fences, which are being destroyed. The destruction tries to acquire the lock on the pending fences list which it can never get because it's held by the wait from which it was called. Old bug, but not a lot of userspace apps were using dma-buf polling interfaces. Fix those, in particular this fixes KDE stalls/deadlock. | ||||
| CVE-2024-43862 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: wan: fsl_qmc_hdlc: Convert carrier_lock spinlock to a mutex The carrier_lock spinlock protects the carrier detection. While it is held, framer_get_status() is called which in turn takes a mutex. This is not correct and can lead to a deadlock. A run with PROVE_LOCKING enabled detected the issue: [ BUG: Invalid wait context ] ... c204ddbc (&framer->mutex){+.+.}-{3:3}, at: framer_get_status+0x40/0x78 other info that might help us debug this: context-{4:4} 2 locks held by ifconfig/146: #0: c0926a38 (rtnl_mutex){+.+.}-{3:3}, at: devinet_ioctl+0x12c/0x664 #1: c2006a40 (&qmc_hdlc->carrier_lock){....}-{2:2}, at: qmc_hdlc_framer_set_carrier+0x30/0x98 Avoid the spinlock usage and convert carrier_lock to a mutex. | ||||
| CVE-2024-43855 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md: fix deadlock between mddev_suspend and flush bio Deadlock occurs when mddev is being suspended while some flush bio is in progress. It is a complex issue. T1. the first flush is at the ending stage, it clears 'mddev->flush_bio' and tries to submit data, but is blocked because mddev is suspended by T4. T2. the second flush sets 'mddev->flush_bio', and attempts to queue md_submit_flush_data(), which is already running (T1) and won't execute again if on the same CPU as T1. T3. the third flush inc active_io and tries to flush, but is blocked because 'mddev->flush_bio' is not NULL (set by T2). T4. mddev_suspend() is called and waits for active_io dec to 0 which is inc by T3. T1 T2 T3 T4 (flush 1) (flush 2) (third 3) (suspend) md_submit_flush_data mddev->flush_bio = NULL; . . md_flush_request . mddev->flush_bio = bio . queue submit_flushes . . . . md_handle_request . . active_io + 1 . . md_flush_request . . wait !mddev->flush_bio . . . . mddev_suspend . . wait !active_io . . . submit_flushes . queue_work md_submit_flush_data . //md_submit_flush_data is already running (T1) . md_handle_request wait resume The root issue is non-atomic inc/dec of active_io during flush process. active_io is dec before md_submit_flush_data is queued, and inc soon after md_submit_flush_data() run. md_flush_request active_io + 1 submit_flushes active_io - 1 md_submit_flush_data md_handle_request active_io + 1 make_request active_io - 1 If active_io is dec after md_handle_request() instead of within submit_flushes(), make_request() can be called directly intead of md_handle_request() in md_submit_flush_data(), and active_io will only inc and dec once in the whole flush process. Deadlock will be fixed. Additionally, the only difference between fixing the issue and before is that there is no return error handling of make_request(). But after previous patch cleaned md_write_start(), make_requst() only return error in raid5_make_request() by dm-raid, see commit 41425f96d7aa ("dm-raid456, md/raid456: fix a deadlock for dm-raid456 while io concurrent with reshape)". Since dm always splits data and flush operation into two separate io, io size of flush submitted by dm always is 0, make_request() will not be called in md_submit_flush_data(). To prevent future modifications from introducing issues, add WARN_ON to ensure make_request() no error is returned in this context. | ||||
| CVE-2024-42294 | 1 Linux | 1 Linux Kernel | 2024-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: fix deadlock between sd_remove & sd_release Our test report the following hung task: [ 2538.459400] INFO: task "kworker/0:0":7 blocked for more than 188 seconds. [ 2538.459427] Call trace: [ 2538.459430] __switch_to+0x174/0x338 [ 2538.459436] __schedule+0x628/0x9c4 [ 2538.459442] schedule+0x7c/0xe8 [ 2538.459447] schedule_preempt_disabled+0x24/0x40 [ 2538.459453] __mutex_lock+0x3ec/0xf04 [ 2538.459456] __mutex_lock_slowpath+0x14/0x24 [ 2538.459459] mutex_lock+0x30/0xd8 [ 2538.459462] del_gendisk+0xdc/0x350 [ 2538.459466] sd_remove+0x30/0x60 [ 2538.459470] device_release_driver_internal+0x1c4/0x2c4 [ 2538.459474] device_release_driver+0x18/0x28 [ 2538.459478] bus_remove_device+0x15c/0x174 [ 2538.459483] device_del+0x1d0/0x358 [ 2538.459488] __scsi_remove_device+0xa8/0x198 [ 2538.459493] scsi_forget_host+0x50/0x70 [ 2538.459497] scsi_remove_host+0x80/0x180 [ 2538.459502] usb_stor_disconnect+0x68/0xf4 [ 2538.459506] usb_unbind_interface+0xd4/0x280 [ 2538.459510] device_release_driver_internal+0x1c4/0x2c4 [ 2538.459514] device_release_driver+0x18/0x28 [ 2538.459518] bus_remove_device+0x15c/0x174 [ 2538.459523] device_del+0x1d0/0x358 [ 2538.459528] usb_disable_device+0x84/0x194 [ 2538.459532] usb_disconnect+0xec/0x300 [ 2538.459537] hub_event+0xb80/0x1870 [ 2538.459541] process_scheduled_works+0x248/0x4dc [ 2538.459545] worker_thread+0x244/0x334 [ 2538.459549] kthread+0x114/0x1bc [ 2538.461001] INFO: task "fsck.":15415 blocked for more than 188 seconds. [ 2538.461014] Call trace: [ 2538.461016] __switch_to+0x174/0x338 [ 2538.461021] __schedule+0x628/0x9c4 [ 2538.461025] schedule+0x7c/0xe8 [ 2538.461030] blk_queue_enter+0xc4/0x160 [ 2538.461034] blk_mq_alloc_request+0x120/0x1d4 [ 2538.461037] scsi_execute_cmd+0x7c/0x23c [ 2538.461040] ioctl_internal_command+0x5c/0x164 [ 2538.461046] scsi_set_medium_removal+0x5c/0xb0 [ 2538.461051] sd_release+0x50/0x94 [ 2538.461054] blkdev_put+0x190/0x28c [ 2538.461058] blkdev_release+0x28/0x40 [ 2538.461063] __fput+0xf8/0x2a8 [ 2538.461066] __fput_sync+0x28/0x5c [ 2538.461070] __arm64_sys_close+0x84/0xe8 [ 2538.461073] invoke_syscall+0x58/0x114 [ 2538.461078] el0_svc_common+0xac/0xe0 [ 2538.461082] do_el0_svc+0x1c/0x28 [ 2538.461087] el0_svc+0x38/0x68 [ 2538.461090] el0t_64_sync_handler+0x68/0xbc [ 2538.461093] el0t_64_sync+0x1a8/0x1ac T1: T2: sd_remove del_gendisk __blk_mark_disk_dead blk_freeze_queue_start ++q->mq_freeze_depth bdev_release mutex_lock(&disk->open_mutex) sd_release scsi_execute_cmd blk_queue_enter wait_event(!q->mq_freeze_depth) mutex_lock(&disk->open_mutex) SCSI does not set GD_OWNS_QUEUE, so QUEUE_FLAG_DYING is not set in this scenario. This is a classic ABBA deadlock. To fix the deadlock, make sure we don't try to acquire disk->open_mutex after freezing the queue. | ||||