| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: fix reserved memory setup
Currently, RISC-V sets up reserved memory using the "early" copy of the
device tree. As a result, when trying to get a reserved memory region
using of_reserved_mem_lookup(), the pointer to reserved memory regions
is using the early, pre-virtual-memory address which causes a kernel
panic when trying to use the buffer's name:
Unable to handle kernel paging request at virtual address 00000000401c31ac
Oops [#1]
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc1-00001-g0d9d6953d834 #1
Hardware name: Microchip PolarFire-SoC Icicle Kit (DT)
epc : string+0x4a/0xea
ra : vsnprintf+0x1e4/0x336
epc : ffffffff80335ea0 ra : ffffffff80338936 sp : ffffffff81203be0
gp : ffffffff812e0a98 tp : ffffffff8120de40 t0 : 0000000000000000
t1 : ffffffff81203e28 t2 : 7265736572203a46 s0 : ffffffff81203c20
s1 : ffffffff81203e28 a0 : ffffffff81203d22 a1 : 0000000000000000
a2 : ffffffff81203d08 a3 : 0000000081203d21 a4 : ffffffffffffffff
a5 : 00000000401c31ac a6 : ffff0a00ffffff04 a7 : ffffffffffffffff
s2 : ffffffff81203d08 s3 : ffffffff81203d00 s4 : 0000000000000008
s5 : ffffffff000000ff s6 : 0000000000ffffff s7 : 00000000ffffff00
s8 : ffffffff80d9821a s9 : ffffffff81203d22 s10: 0000000000000002
s11: ffffffff80d9821c t3 : ffffffff812f3617 t4 : ffffffff812f3617
t5 : ffffffff812f3618 t6 : ffffffff81203d08
status: 0000000200000100 badaddr: 00000000401c31ac cause: 000000000000000d
[<ffffffff80338936>] vsnprintf+0x1e4/0x336
[<ffffffff80055ae2>] vprintk_store+0xf6/0x344
[<ffffffff80055d86>] vprintk_emit+0x56/0x192
[<ffffffff80055ed8>] vprintk_default+0x16/0x1e
[<ffffffff800563d2>] vprintk+0x72/0x80
[<ffffffff806813b2>] _printk+0x36/0x50
[<ffffffff8068af48>] print_reserved_mem+0x1c/0x24
[<ffffffff808057ec>] paging_init+0x528/0x5bc
[<ffffffff808031ae>] setup_arch+0xd0/0x592
[<ffffffff8080070e>] start_kernel+0x82/0x73c
early_init_fdt_scan_reserved_mem() takes no arguments as it operates on
initial_boot_params, which is populated by early_init_dt_verify(). On
RISC-V, early_init_dt_verify() is called twice. Once, directly, in
setup_arch() if CONFIG_BUILTIN_DTB is not enabled and once indirectly,
very early in the boot process, by parse_dtb() when it calls
early_init_dt_scan_nodes().
This first call uses dtb_early_va to set initial_boot_params, which is
not usable later in the boot process when
early_init_fdt_scan_reserved_mem() is called. On arm64 for example, the
corresponding call to early_init_dt_scan_nodes() uses fixmap addresses
and doesn't suffer the same fate.
Move early_init_fdt_scan_reserved_mem() further along the boot sequence,
after the direct call to early_init_dt_verify() in setup_arch() so that
the names use the correct virtual memory addresses. The above supposed
that CONFIG_BUILTIN_DTB was not set, but should work equally in the case
where it is - unflatted_and_copy_device_tree() also updates
initial_boot_params. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix match incorrectly in dev_args_match_device
syzkaller found a failed assertion:
assertion failed: (args->devid != (u64)-1) || args->missing, in fs/btrfs/volumes.c:6921
This can be triggered when we set devid to (u64)-1 by ioctl. In this
case, the match of devid will be skipped and the match of device may
succeed incorrectly.
Patch 562d7b1512f7 introduced this function which is used to match device.
This function contains two matching scenarios, we can distinguish them by
checking the value of args->missing rather than check whether args->devid
and args->uuid is default value. |
| In the Linux kernel, the following vulnerability has been resolved:
mISDN: fix misuse of put_device() in mISDN_register_device()
We should not release reference by put_device() before calling device_initialize(). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix oob write in trace_seq_to_buffer()
syzbot reported this bug:
==================================================================
BUG: KASAN: slab-out-of-bounds in trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
BUG: KASAN: slab-out-of-bounds in tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
Write of size 4507 at addr ffff888032b6b000 by task syz.2.320/7260
CPU: 1 UID: 0 PID: 7260 Comm: syz.2.320 Not tainted 6.15.0-rc1-syzkaller-00301-g3bde70a2c827 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0xc3/0x670 mm/kasan/report.c:521
kasan_report+0xe0/0x110 mm/kasan/report.c:634
check_region_inline mm/kasan/generic.c:183 [inline]
kasan_check_range+0xef/0x1a0 mm/kasan/generic.c:189
__asan_memcpy+0x3c/0x60 mm/kasan/shadow.c:106
trace_seq_to_buffer kernel/trace/trace.c:1830 [inline]
tracing_splice_read_pipe+0x6be/0xdd0 kernel/trace/trace.c:6822
....
==================================================================
It has been reported that trace_seq_to_buffer() tries to copy more data
than PAGE_SIZE to buf. Therefore, to prevent this, we should use the
smaller of trace_seq_used(&iter->seq) and PAGE_SIZE as an argument. |
| In the Linux kernel, the following vulnerability has been resolved:
octeon_ep: fix potential memory leak in octep_device_setup()
When occur unsupported_dev and mbox init errors, it did not free oct->conf
and iounmap() oct->mmio[i].hw_addr. That would trigger memory leak problem.
Add kfree() for oct->conf and iounmap() for oct->mmio[i].hw_addr under
unsupported_dev and mbox init errors to fix the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in kerberos authentication
Setting sess->user = NULL was introduced to fix the dangling pointer
created by ksmbd_free_user. However, it is possible another thread could
be operating on the session and make use of sess->user after it has been
passed to ksmbd_free_user but before sess->user is set to NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
mctp i2c: don't count unused / invalid keys for flow release
We're currently hitting the WARN_ON in mctp_i2c_flow_release:
if (midev->release_count > midev->i2c_lock_count) {
WARN_ONCE(1, "release count overflow");
This may be hit if we expire a flow before sending the first packet it
contains - as we will not be pairing the increment of release_count
(performed on flow release) with the i2c lock operation (only
performed on actual TX).
To fix this, only release a flow if we've encountered it previously (ie,
dev_flow_state does not indicate NEW), as we will mark the flow as
ACTIVE at the same time as accounting for the i2c lock operation. We
also need to add an INVALID flow state, to indicate when we've done the
release. |
| A vulnerability, which was classified as critical, was found in chaitak-gorai Blogbook up to 92f5cf90f8a7e6566b576fe0952e14e1c6736513. Affected is an unknown function of the file /admin/posts.php?source=add_post. The manipulation of the argument image leads to unrestricted upload. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in chaitak-gorai Blogbook up to 92f5cf90f8a7e6566b576fe0952e14e1c6736513 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /register_script.php. The manipulation of the argument fullname leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. It is recommended to upgrade the affected component. The vendor was contacted early about this disclosure but did not respond in any way. |
| RaspAP raspap-webgui 3.3.1 is vulnerable to Directory Traversal in ajax/networking/get_wgkey.php. An authenticated attacker can send a crafted POST request with a path traversal payload in the `entity` parameter to overwrite arbitrary files writable by the web server via abuse of the `tee` command used in shell execution. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in ksmbd_session_rpc_open
A UAF issue can occur due to a race condition between
ksmbd_session_rpc_open() and __session_rpc_close().
Add rpc_lock to the session to protect it. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Fix potential buffer overflow in parse_ivrs_acpihid
There is a string parsing logic error which can lead to an overflow of hid
or uid buffers. Comparing ACPIID_LEN against a total string length doesn't
take into account the lengths of individual hid and uid buffers so the
check is insufficient in some cases. For example if the length of hid
string is 4 and the length of the uid string is 260, the length of str
will be equal to ACPIID_LEN + 1 but uid string will overflow uid buffer
which size is 256.
The same applies to the hid string with length 13 and uid string with
length 250.
Check the length of hid and uid strings separately to prevent
buffer overflow.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-bufio: don't schedule in atomic context
A BUG was reported as below when CONFIG_DEBUG_ATOMIC_SLEEP and
try_verify_in_tasklet are enabled.
[ 129.444685][ T934] BUG: sleeping function called from invalid context at drivers/md/dm-bufio.c:2421
[ 129.444723][ T934] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 934, name: kworker/1:4
[ 129.444740][ T934] preempt_count: 201, expected: 0
[ 129.444756][ T934] RCU nest depth: 0, expected: 0
[ 129.444781][ T934] Preemption disabled at:
[ 129.444789][ T934] [<ffffffd816231900>] shrink_work+0x21c/0x248
[ 129.445167][ T934] kernel BUG at kernel/sched/walt/walt_debug.c:16!
[ 129.445183][ T934] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
[ 129.445204][ T934] Skip md ftrace buffer dump for: 0x1609e0
[ 129.447348][ T934] CPU: 1 PID: 934 Comm: kworker/1:4 Tainted: G W OE 6.6.56-android15-8-o-g6f82312b30b9-debug #1 1400000003000000474e5500b3187743670464e8
[ 129.447362][ T934] Hardware name: Qualcomm Technologies, Inc. Parrot QRD, Alpha-M (DT)
[ 129.447373][ T934] Workqueue: dm_bufio_cache shrink_work
[ 129.447394][ T934] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 129.447406][ T934] pc : android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug]
[ 129.447435][ T934] lr : __traceiter_android_rvh_schedule_bug+0x44/0x6c
[ 129.447451][ T934] sp : ffffffc0843dbc90
[ 129.447459][ T934] x29: ffffffc0843dbc90 x28: ffffffffffffffff x27: 0000000000000c8b
[ 129.447479][ T934] x26: 0000000000000040 x25: ffffff804b3d6260 x24: ffffffd816232b68
[ 129.447497][ T934] x23: ffffff805171c5b4 x22: 0000000000000000 x21: ffffffd816231900
[ 129.447517][ T934] x20: ffffff80306ba898 x19: 0000000000000000 x18: ffffffc084159030
[ 129.447535][ T934] x17: 00000000d2b5dd1f x16: 00000000d2b5dd1f x15: ffffffd816720358
[ 129.447554][ T934] x14: 0000000000000004 x13: ffffff89ef978000 x12: 0000000000000003
[ 129.447572][ T934] x11: ffffffd817a823c4 x10: 0000000000000202 x9 : 7e779c5735de9400
[ 129.447591][ T934] x8 : ffffffd81560d004 x7 : 205b5d3938373434 x6 : ffffffd8167397c8
[ 129.447610][ T934] x5 : 0000000000000000 x4 : 0000000000000001 x3 : ffffffc0843db9e0
[ 129.447629][ T934] x2 : 0000000000002f15 x1 : 0000000000000000 x0 : 0000000000000000
[ 129.447647][ T934] Call trace:
[ 129.447655][ T934] android_rvh_schedule_bug+0x0/0x8 [sched_walt_debug 1400000003000000474e550080cce8a8a78606b6]
[ 129.447681][ T934] __might_resched+0x190/0x1a8
[ 129.447694][ T934] shrink_work+0x180/0x248
[ 129.447706][ T934] process_one_work+0x260/0x624
[ 129.447718][ T934] worker_thread+0x28c/0x454
[ 129.447729][ T934] kthread+0x118/0x158
[ 129.447742][ T934] ret_from_fork+0x10/0x20
[ 129.447761][ T934] Code: ???????? ???????? ???????? d2b5dd1f (d4210000)
[ 129.447772][ T934] ---[ end trace 0000000000000000 ]---
dm_bufio_lock will call spin_lock_bh when try_verify_in_tasklet
is enabled, and __scan will be called in atomic context. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
Commit a5951389e58d ("arm64: errata: Add newer ARM cores to the
spectre_bhb_loop_affected() lists") added some additional CPUs to the
Spectre-BHB workaround, including some new arrays for designs that
require new 'k' values for the workaround to be effective.
Unfortunately, the new arrays omitted the sentinel entry and so
is_midr_in_range_list() will walk off the end when it doesn't find a
match. With UBSAN enabled, this leads to a crash during boot when
is_midr_in_range_list() is inlined (which was more common prior to
c8c2647e69be ("arm64: Make _midr_in_range_list() an exported
function")):
| Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP
| pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : spectre_bhb_loop_affected+0x28/0x30
| lr : is_spectre_bhb_affected+0x170/0x190
| [...]
| Call trace:
| spectre_bhb_loop_affected+0x28/0x30
| update_cpu_capabilities+0xc0/0x184
| init_cpu_features+0x188/0x1a4
| cpuinfo_store_boot_cpu+0x4c/0x60
| smp_prepare_boot_cpu+0x38/0x54
| start_kernel+0x8c/0x478
| __primary_switched+0xc8/0xd4
| Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: aarch64 BRK: Fatal exception
Add the missing sentinel entries. |
| Improper handling of malformed Connection Request with the interval set to be 1 (which supposed to be illegal) and the chM 0x7CFFFFFFFF triggers a crash. The peripheral will not be connectable after it. |
| The Asgaros Forum plugin for WordPress is vulnerable to SQL Injection via the '$_COOKIE['asgarosforum_unread_exclude']' cookie in all versions up to, and including, 3.1.0 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The Simple Downloads List plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the 'wp_ajax_neofix_sdl_edit' AJAX endpoint along with many others in all versions up to, and including, 1.4.3. This makes it possible for authenticated attackers, with Subscriber-level access and above, to alter many of the plugin's settings/downloads and inject malicious web scripts. |
| In the Linux kernel, the following vulnerability has been resolved:
mISDN: fix possible memory leak in mISDN_dsp_element_register()
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically,
use put_device() to give up the reference, so that the name can be
freed in kobject_cleanup() when the refcount is 0.
The 'entry' is going to be freed in mISDN_dsp_dev_release(), so the
kfree() is removed. list_del() is called in mISDN_dsp_dev_release(),
so it need be initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
cifs: Fix connections leak when tlink setup failed
If the tlink setup failed, lost to put the connections, then
the module refcnt leak since the cifsd kthread not exit.
Also leak the fscache info, and for next mount with fsc, it will
print the follow errors:
CIFS: Cache volume key already in use (cifs,127.0.0.1:445,TEST)
Let's check the result of tlink setup, and do some cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-transport: fix error handling in ata_tdev_add()
In ata_tdev_add(), the return value of transport_add_device() is
not checked. As a result, it causes null-ptr-deref while removing
the module, because transport_remove_device() is called to remove
the device that was not added.
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
CPU: 13 PID: 13603 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #36
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x48/0x3a0
lr : device_del+0x44/0x3a0
Call trace:
device_del+0x48/0x3a0
attribute_container_class_device_del+0x28/0x40
transport_remove_classdev+0x60/0x7c
attribute_container_device_trigger+0x118/0x120
transport_remove_device+0x20/0x30
ata_tdev_delete+0x24/0x50 [libata]
ata_tlink_delete+0x40/0xa0 [libata]
ata_tport_delete+0x2c/0x60 [libata]
ata_port_detach+0x148/0x1b0 [libata]
ata_pci_remove_one+0x50/0x80 [libata]
ahci_remove_one+0x4c/0x8c [ahci]
Fix this by checking and handling return value of transport_add_device()
in ata_tdev_add(). In the error path, device_del() is called to delete
the device which was added earlier in this function, and ata_tdev_free()
is called to free ata_dev. |
