| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Charge unstable writes by request size, not folio size
nfs_folio_mark_unstable() and nfs_folio_clear_commit() charge and
uncharge NR_WRITEBACK/WB_WRITEBACK by folio_nr_pages(folio) once per
*request* added to or removed from a commit list. This is correct only
when a folio has a single associated request. When pg_test splits a
folio into N sub-folio requests (e.g. pNFS flexfiles striping with a
stripe unit smaller than the folio size, or plain wsize-limited
splitting), each of the N requests independently charges the whole
folio's page count, inflating the accounting by a factor of N per
folio. With large folios and small stripe units this reaches multiple
orders of magnitude: a 2 MiB folio split into 512 4 KiB requests can
charge up to 512x its real size, pushing global dirty+writeback
accounting past the system's dirty threshold and forcing every
buffered writer on the host into the hard-throttle path, including
unrelated in-kernel NFS server threads sharing the box.
Charge each request only for the pages it actually covers. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: uniphier: Fix completion initialization order before devm_request_irq()
The driver calls devm_request_irq() before initializing the completion
used by the interrupt handler. Because the interrupt may occur immediately
after devm_request_irq(), the handler may execute before init_completion().
This may result in calling complete() on an uninitialized completion,
causing undefined behavior. This has been observed with KASAN.
Fix this by initializing the completion before registering the IRQ. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: imx: reconfigure for PIO when DMA cannot be started
When spi_imx_can_dma() selects DMA, the ECSPI is configured for DMA:
spi_imx_setupxfer() sets CTRL.SMC and clears dynamic_burst, and
spi_imx_dma_transfer() programs the dynamic-burst BURST_LENGTH and the
SDMA watermarks.
If the DMA descriptor cannot be prepared (dmaengine_prep_slave_single()
returns NULL), the transfer is failed with SPI_TRANS_FAIL_NO_START and
falls back to PIO. The dynamic-burst DMA path uses its own bounce
buffers instead of the SPI core's mapping, so xfer->{tx,rx}_sg_mapped
are not set and the core's DMA->PIO retry is skipped; the driver falls
back to PIO internally. But none of the DMA-mode configuration is
undone, so the PIO transfer runs with CTRL.SMC set, the wrong burst
length and dynamic_burst cleared, and the transferred data is corrupted.
This is easily hit on i.MX8MP boards that describe ECSPI DMA in the
device tree but run SDMA on ROM firmware (no external sdma-imx7d.bin):
every ECSPI DMA prepare fails. An Infineon SLB9670 TPM on ECSPI1 then
returns shifted TPM2_GetCapability data, is flagged "field failure
mode", /dev/tpmrm0 is never created.
Set controller->fallback before re-running spi_imx_setupxfer() so the
ECSPI is reconfigured exactly like a normal PIO transfer. With
controller->fallback set, spi_imx_setupxfer() sees spi_imx_can_dma()
return false, so it clears spi_imx->usedma and reprograms the controller
(clears CTRL.SMC, restores dynamic_burst and the PIO burst length). No
explicit spi_imx->usedma = false is needed: setupxfer() already updates
it from the can_dma() result. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: charger-manager: fix refcount leak in is_full_charged()
In is_full_charged(), power_supply_get_by_name() is called to
obtain a reference to the fuel_gauge power supply. If the
voltage check (uV >= desc->fullbatt_uV) succeeds, the function
returns true directly without releasing the reference, leaking
the refcount.
Fix this by setting a flag and jumping to the out label where
power_supply_put() properly drops the reference. |
| An issue in O2OA v.10.0.2 allows a local attacker to execute arbitrary code via the the sandbox mechanism of the Invoke script execution. |
| Oh My Zsh is a community-driven framework for managing Zsh configuration. Prior to 2026-05-28, the dotenv plugin in plugins/dotenv/dotenv.plugin.zsh passes ZSH_DOTENV_FILE to source after a directory change into a folder containing a .env file, allowing syntactically valid shell commands in the file to execute with the current account's privileges, including without a prompt when ZSH_DOTENV_PROMPT=false or after the default prompt accepts an empty Enter response. This issue is fixed in versions released after 2026-05-28. |
| A flaw was found in Red Hat Quay. A user with FEATURE_BUILD_SUPPORT enabled and repository write access can exploit a Server-Side Request Forgery (SSRF) vulnerability within the build API. This allows the user to provide a malicious URL, causing the Quay builder to make requests to internal network addresses. Such an action could lead to the disclosure of sensitive internal information. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Fix GISC refcount leak on AIF enable failure
kvm_s390_gisc_register() registers the guest ISC before pinning
the guest interrupt forwarding pages and allocating the AISB bit.
If any of the later setup steps fails, the function unwinds the
pinned pages and other local state, but does not unregister the
GISC reference. Add the missing kvm_s390_gisc_unregister() to the
error unwind path. |
| IBM i Access Client Solutions 1.1.2.0 through 1.1.9.13 is vulnerable to arbitrary code execution on Windows when installed for all users due to publicly writeable configuration file. |
| A flaw was found in 389 Directory Server. An unauthenticated remote attacker can inject LDAP search filters into the CleanAllRUV replication status-check extended operation. Because the handler performs the search against cn=config with elevated replication plugin privileges and returns a boolean match result, the attacker can extract sensitive server configuration metadata, including replication bind DNs and password storage scheme information. |
| ArcadeDB versions before 26.8.1 contain a server-side request forgery vulnerability in the IMPORT DATABASE command where the security validator resolves and checks hostnames but the subsequent connection re-resolves the raw URL and follows redirects. Authenticated attackers can bypass the validator using DNS rebinding or HTTP redirects to access cloud metadata endpoints, internal services, or read arbitrary local files on default installations. |
| A vulnerability was identified in SourceCodester Class and Exam Timetabling System 1.0. Affected by this issue is some unknown functionality of the file /BSCE2.php. Such manipulation of the argument course leads to cross site scripting. The attack may be launched remotely. The exploit is publicly available and might be used. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix zerocopy completion for multi-skb sends
When a large message is fragmented into multiple skbs, the zerocopy
uarg is only allocated and attached to the last skb in the loop.
Non-final skbs carry pinned user pages with no completion tracking,
so the kernel has no way to notify userspace when those pages are safe
to reuse. If the loop breaks early the uarg is never allocated at all,
leaking pinned pages with no completion notification.
Fix this by following the approach used by TCP: allocate the zerocopy
uarg (if not provided by the caller) before the send loop and attach
it to every skb via skb_zcopy_set(), which takes a reference per skb.
Each skb's completion properly decrements the refcount, and the
notification only fires after the last skb is freed.
On failure, if no data was sent, the uarg is cleanly aborted via
net_zcopy_put_abort().
This issue was initially discovered by sashiko while reviewing commit
1cb36e252211 ("vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting")
but was pre-existing. |
| A flaw has been found in jkawamoto mcp-florence2 up to 0.3.13. Affected by this issue is the function get_images of the file src/mcp_florence2/__init__.py. This manipulation of the argument src causes server-side request forgery. The attack may be initiated remotely. The exploit has been published and may be used. It is recommended to change the configuration settings. The vendor explains: "For deployments where SSRF protection is required, I recommend routing all HTTP(S) requests through an SSRF-safe proxy server. This approach mitigates the vulnerability without requiring changes to the mcp-florence2 source code." |
| A vulnerability was found in Jij-Inc Jij-MCP-Server 0.1.0. This affects the function PythonREPL.run of the file jij_mcp/python_repr.py of the component jm_check. The manipulation of the argument code results in code injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw was found in sg3_utils. The sg_inq command, when invoked with the --export option, outputs device identification data without sanitizing control characters in SCSI name string fields. A newline character embedded in a device-supplied name string can inject arbitrary properties into the udev device database. This could allow an attacker who can present a crafted SCSI device to execute arbitrary commands as root when the device is disconnected. |
| A vulnerability was identified in graphlit graphlit-mcp-server 1.0.1. This affects the function fetch of the file src/tools.ts of the component ssrf-test Endpoint. Such manipulation of the argument url leads to server-side request forgery. The attack may be launched remotely. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| Prebid Server is an open-source solution for running real-time advertising auctions in the cloud. Prior to version 4.4.0, certain bidder adapters in Prebid Server interpolate user-supplied parameters into outbound request URLs without properly validating host and subdomain values, allowing crafted bid request parameters to cause server-side requests to unintended destinations and potentially expose internal network services or sensitive server endpoints. This issue is fixed in version 4.4.0. |
| A security flaw has been discovered in DefaultFuction Notice-System-Managent 2.0. This issue affects the function GroovyShell.evaluate of the file /execute of the component NoticeController. The manipulation results in code injection. The attack can be launched remotely. The exploit has been released to the public and may be used for attacks. The project confirms, that "it’s being processed". |
| Budibase is an open-source low-code platform. Prior to 3.41.3, automation steps in packages/server/src/automations/steps/outgoingWebhook.ts, packages/server/src/automations/steps/zapier.ts, packages/server/src/automations/steps/n8n.ts, packages/server/src/automations/steps/slack.ts, and packages/server/src/automations/steps/discord.ts use node-fetch on user-provided URLs without the BLACKLIST_IPS enforcement used by the REST integration, allowing an authenticated user to make server-side requests to cloud metadata and internal services. This issue is fixed in version 3.41.3. |
