Search vulnerabilities

Results 428,340

CVE-2025-61104

frr: NULL pointer dereference in show_vty_unknown_tlv() in ospf_ext.c

FRRouting/frr from v4.0 through v10.4.1 was discovered to contain a NULL pointer dereference via the show_vty_unknown_tlv function at ospf_ext.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted OSPF packet.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-21903

mctp i3c: handle NULL header address

In the Linux kernel, the following vulnerability has been resolved: mctp i3c: handle NULL header address daddr can be NULL if there is no neighbour table entry present, in that case the tx packet should be dropped. saddr will usually be set by MCTP core, but check for NULL in case a packet is transmitted by a different protocol.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-21902

acpi: typec: ucsi: Introduce a ->poll_cci method

In the Linux kernel, the following vulnerability has been resolved: acpi: typec: ucsi: Introduce a ->poll_cci method For the ACPI backend of UCSI the UCSI "registers" are just a memory copy of the register values in an opregion. The ACPI implementation in the BIOS ensures that the opregion contents are synced to the embedded controller and it ensures that the registers (in particular CCI) are synced back to the opregion on notifications. While there is an ACPI call that syncs the actual registers to the opregion there is rarely a need to do this and on some ACPI implementations it actually breaks in various interesting ways. The only reason to force a sync from the embedded controller is to poll CCI while notifications are disabled. Only the ucsi core knows if this is the case and guessing based on the current command is suboptimal, i.e. leading to the following spurious assertion splat: WARNING: CPU: 3 PID: 76 at drivers/usb/typec/ucsi/ucsi.c:1388 ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] CPU: 3 UID: 0 PID: 76 Comm: kworker/3:0 Not tainted 6.12.11-200.fc41.x86_64 #1 Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN45WW 03/17/2023 Workqueue: events_long ucsi_init_work [typec_ucsi] RIP: 0010:ucsi_reset_ppm+0x1b4/0x1c0 [typec_ucsi] Call Trace: <TASK> ucsi_init_work+0x3c/0xac0 [typec_ucsi] process_one_work+0x179/0x330 worker_thread+0x252/0x390 kthread+0xd2/0x100 ret_from_fork+0x34/0x50 ret_from_fork_asm+0x1a/0x30 </TASK> Thus introduce a ->poll_cci() method that works like ->read_cci() with an additional forced sync and document that this should be used when polling with notifications disabled. For all other backends that presumably don't have this issue use the same implementation for both methods.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-21897

sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called without balance()

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix pick_task_scx() picking non-queued tasks when it's called without balance() a6250aa251ea ("sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()") added a workaround to handle the cases where pick_task_scx() is called without prececing balance_scx() which is due to a fair class bug where pick_taks_fair() may return NULL after a true return from balance_fair(). The workaround detects when pick_task_scx() is called without preceding balance_scx() and emulates SCX_RQ_BAL_KEEP and triggers kicking to avoid stalling. Unfortunately, the workaround code was testing whether @prev was on SCX to decide whether to keep the task running. This is incorrect as the task may be on SCX but no longer runnable. This could lead to a non-runnable task to be returned from pick_task_scx() which cause interesting confusions and failures. e.g. A common failure mode is the task ending up with (!on_rq && on_cpu) state which can cause potential wakers to busy loop, which can easily lead to deadlocks. Fix it by testing whether @prev has SCX_TASK_QUEUED set. This makes @prev_on_scx only used in one place. Open code the usage and improve the comment while at it.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-21896

fuse: revert back to __readahead_folio() for readahead

In the Linux kernel, the following vulnerability has been resolved: fuse: revert back to __readahead_folio() for readahead In commit 3eab9d7bc2f4 ("fuse: convert readahead to use folios"), the logic was converted to using the new folio readahead code, which drops the reference on the folio once it is locked, using an inferred reference on the folio. Previously we held a reference on the folio for the entire duration of the readpages call. This is fine, however for the case for splice pipe responses where we will remove the old folio and splice in the new folio (see fuse_try_move_page()), we assume that there is a reference held on the folio for ap->folios, which is no longer the case. To fix this, revert back to __readahead_folio() which allows us to hold the reference on the folio for the duration of readpages until either we drop the reference ourselves in fuse_readpages_end() or the reference is dropped after it's replaced in the page cache in the splice case. This will fix the UAF bug that was reported.

CVSS 3.1 · 7.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-61106

frr: NULL pointer dereference in show_vty_ext_pref_pref_sid() in ospf_ext.c

FRRouting/frr from v4.0 through v10.4.1 was discovered to contain a NULL pointer dereference via the show_vty_ext_pref_pref_sid function at ospf_ext.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted OSPF packet.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2025-61107

frr: NULL pointer dereference in show_vty_ext_pref_pref_sid() in ospf_ext.c

FRRouting/frr from v4.0 through v10.4.1 was discovered to contain a NULL pointer dereference via the show_vty_ext_pref_pref_sid function at ospf_ext.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted LSA Update packet.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2022-40139

Improper validation of some components used by the rollback mechanism in Trend Micro Apex One and Trend Micro Apex One as a Service clients could allow a Apex One server administrator to instruct affected clients to download an unverified rollback package, which could lead to remote code execution. Please note: an attacker must first obtain Apex One server administration console access in order to exploit this vulnerability.

CVSS 3.1 · 7.2 High EPSS 3.5% KEV · Listed
Products
CVE-2022-27926

A reflected cross-site scripting (XSS) vulnerability in the /public/launchNewWindow.jsp component of Zimbra Collaboration (aka ZCS) 9.0 allows unauthenticated attackers to execute arbitrary web script or HTML via request parameters.

CVSS 3.1 · 6.1 Medium EPSS 17.6% KEV · Listed
Vendors
CVE-2025-11618

Invalid Pointer Dereference when receiving UDP/IPv6 packets in FreeRTOS-Plus-TCP

A missing validation check in FreeRTOS-Plus-TCP's UDP/IPv6 packet processing code can lead to an invalid pointer dereference when receiving a UDP/IPv6 packet with an incorrect IP version field in the packet header. This issue only affects applications using IPv6. We recommend upgrading to the latest version and ensure any forked or derivative code is patched to incorporate the new fixes.

CVSS 4.0 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2025-11616

Buffer Over-read when receiving improperly sized ICMPv6 packets in FreeRTOS-Plus-TCP

A missing validation check in FreeRTOS-Plus-TCP's ICMPv6 packet processing code can lead to an out-of-bounds read when receiving ICMPv6 packets of certain message types which are smaller than the expected size. These issues only affect applications using IPv6. Users should upgrade to the latest version and ensure any forked or derivative code is patched to incorporate the new fixes.

CVSS 4.0 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2025-11617

Buffer Over-read when receiving IPv6 packets with incorrect payload length in FreeRTOS-Plus-TCP

A missing validation check in FreeRTOS-Plus-TCP's IPv6 packet processing code can lead to an out-of-bounds read when receiving a IPv6 packet with incorrect payload lengths in the packet header. This issue only affects applications using IPv6. We recommend users upgrade to the latest version and ensure any forked or derivative code is patched to incorporate the new fixes.

CVSS 4.0 · 5.3 Medium EPSS < 1% KEV · Not listed
Vendors