| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SMB dissector in Ethereal 0.9.3 and earlier allows remote attackers to cause a denial of service (crash) or execute arbitrary code via malformed packets that cause Ethereal to dereference a NULL pointer. |
| IP fragmentation denial of service in FreeBSD allows a remote attacker to cause a crash. |
| The do_change_cipher_spec function in OpenSSL 0.9.6c to 0.9.6k, and 0.9.7a to 0.9.7c, allows remote attackers to cause a denial of service (crash) via a crafted SSL/TLS handshake that triggers a null dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: detach and close netdevs while handling a reset
Protect the reset path from callbacks by setting the netdevs to detached
state and close any netdevs in UP state until the reset handling has
completed. During a reset, the driver will de-allocate resources for the
vport, and there is no guarantee that those will recover, which is why the
existing vport_ctrl_lock does not provide sufficient protection.
idpf_detach_and_close() is called right before reset handling. If the
reset handling succeeds, the netdevs state is recovered via call to
idpf_attach_and_open(). If the reset handling fails the netdevs remain
down. The detach/down calls are protected with RTNL lock to avoid racing
with callbacks. On the recovery side the attach can be done without
holding the RTNL lock as there are no callbacks expected at that point,
due to detach/close always being done first in that flow.
The previous logic restoring the netdevs state based on the
IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence
the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is
still being used to restore the state of the netdevs following the reset,
but has no use outside of the reset handling flow.
idpf_init_hard_reset() is converted to void, since it was used as such and
there is no error handling being done based on its return value.
Before this change, invoking hard and soft resets simultaneously will
cause the driver to lose the vport state:
ip -br a
<inf> UP
echo 1 > /sys/class/net/ens801f0/device/reset& \
ethtool -L ens801f0 combined 8
ip -br a
<inf> DOWN
ip link set <inf> up
ip -br a
<inf> DOWN
Also in case of a failure in the reset path, the netdev is left
exposed to external callbacks, while vport resources are not
initialized, leading to a crash on subsequent ifup/down:
[408471.398966] idpf 0000:83:00.0: HW reset detected
[408471.411744] idpf 0000:83:00.0: Device HW Reset initiated
[408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2
[408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078
[408508.126112] #PF: supervisor read access in kernel mode
[408508.126687] #PF: error_code(0x0000) - not-present page
[408508.127256] PGD 2aae2f067 P4D 0
[408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI
...
[408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf]
...
[408508.139193] Call Trace:
[408508.139637] <TASK>
[408508.140077] __dev_close_many+0xbb/0x260
[408508.140533] __dev_change_flags+0x1cf/0x280
[408508.140987] netif_change_flags+0x26/0x70
[408508.141434] dev_change_flags+0x3d/0xb0
[408508.141878] devinet_ioctl+0x460/0x890
[408508.142321] inet_ioctl+0x18e/0x1d0
[408508.142762] ? _copy_to_user+0x22/0x70
[408508.143207] sock_do_ioctl+0x3d/0xe0
[408508.143652] sock_ioctl+0x10e/0x330
[408508.144091] ? find_held_lock+0x2b/0x80
[408508.144537] __x64_sys_ioctl+0x96/0xe0
[408508.144979] do_syscall_64+0x79/0x3d0
[408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[408508.145860] RIP: 0033:0x7f3e0bb4caff |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: Fix RSS LUT NULL ptr issue after soft reset
During soft reset, the RSS LUT is freed and not restored unless the
interface is up. If an ethtool command that accesses the rss lut is
attempted immediately after reset, it will result in NULL ptr
dereference. Also, there is no need to reset the rss lut if the soft reset
does not involve queue count change.
After soft reset, set the RSS LUT to default values based on the updated
queue count only if the reset was a result of a queue count change and
the LUT was not configured by the user. In all other cases, don't touch
the LUT.
Steps to reproduce:
** Bring the interface down (if up)
ifconfig eth1 down
** update the queue count (eg., 27->20)
ethtool -L eth1 combined 20
** display the RSS LUT
ethtool -x eth1
[82375.558338] BUG: kernel NULL pointer dereference, address: 0000000000000000
[82375.558373] #PF: supervisor read access in kernel mode
[82375.558391] #PF: error_code(0x0000) - not-present page
[82375.558408] PGD 0 P4D 0
[82375.558421] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[82375.558516] RIP: 0010:idpf_get_rxfh+0x108/0x150 [idpf]
[82375.558786] Call Trace:
[82375.558793] <TASK>
[82375.558804] rss_prepare.isra.0+0x187/0x2a0
[82375.558827] rss_prepare_data+0x3a/0x50
[82375.558845] ethnl_default_doit+0x13d/0x3e0
[82375.558863] genl_family_rcv_msg_doit+0x11f/0x180
[82375.558886] genl_rcv_msg+0x1ad/0x2b0
[82375.558902] ? __pfx_ethnl_default_doit+0x10/0x10
[82375.558920] ? __pfx_genl_rcv_msg+0x10/0x10
[82375.558937] netlink_rcv_skb+0x58/0x100
[82375.558957] genl_rcv+0x2c/0x50
[82375.558971] netlink_unicast+0x289/0x3e0
[82375.558988] netlink_sendmsg+0x215/0x440
[82375.559005] __sys_sendto+0x234/0x240
[82375.559555] __x64_sys_sendto+0x28/0x30
[82375.560068] x64_sys_call+0x1909/0x1da0
[82375.560576] do_syscall_64+0x7a/0xfa0
[82375.561076] ? clear_bhb_loop+0x60/0xb0
[82375.561567] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<snip> |
| Null pointer dereference in Windows LDAP - Lightweight Directory Access Protocol allows an unauthorized attacker to deny service over a network. |
| The application does not validate the presence of required appearance (AP) data before accessing stamp annotation resources. When a PDF contains a stamp annotation missing its AP entry, the code continues to dereference the associated object without a prior null or validity check, which allows a crafted document to trigger a null pointer dereference and crash the application, resulting in denial of service. |
| In systemd 260 before 261, a local unprivileged user can trigger an assert via an IPC API call with an array or map that has a null element. |
| A vulnerability in the DHCP version 4 (DHCPv4) server feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to trigger a crash of the dhcpd process, resulting in a denial of service (DoS) condition.
This vulnerability exists because certain DHCPv4 messages are improperly validated when they are processed by an affected device. An attacker could exploit this vulnerability by sending a malformed DHCPv4 message to an affected device. A successful exploit could allow the attacker to cause a crash of the dhcpd process. While the dhcpd process is restarting, which may take approximately two minutes, DHCPv4 server services are unavailable on the affected device. This could temporarily prevent network access to clients that join the network during that time period and rely on the DHCPv4 server of the affected device.
Notes:
Only the dhcpd process crashes and eventually restarts automatically. The router does not reload.
This vulnerability only applies to DHCPv4. DHCP version 6 (DHCPv6) is not affected. |
| taurusxin ncmdump v1.3.2 was discovered to contain a segmentation violation via the NeteaseCrypt::FixMetadata() function at /src/ncmcrypt.cpp. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted .ncm file. |
| A Null pointer dereference vulnerability in the Mobile Management Entity (MME) in Magma <= 1.8.0 (fixed in v1.9 commit 08472ba98b8321f802e95f5622fa90fec2dea486) allows network-adjacent attackers to crash the MME via an S1AP `S1Setup Request` packet missing an expected `Global eNB ID` field. |
| A vulnerability has been identified in JT2Go (All versions < V2312.0004), Parasolid V35.1 (All versions < V35.1.254), Parasolid V36.0 (All versions < V36.0.207), Parasolid V36.1 (All versions < V36.1.147), Teamcenter Visualization V14.2 (All versions < V14.2.0.12), Teamcenter Visualization V14.3 (All versions < V14.3.0.9), Teamcenter Visualization V2312 (All versions < V2312.0004). The affected applications contain a null pointer dereference vulnerability while parsing specially crafted X_T files. An attacker could leverage this vulnerability to crash the application causing denial of service condition. |
| A null pointer dereference in Palo Alto Networks PAN-OS software on PA-800 Series, PA-3200 Series, PA-5200 Series, and PA-7000 Series hardware platforms when Decryption policy is enabled allows an unauthenticated attacker to crash PAN-OS by sending specific traffic through the data plane, resulting in a denial of service (DoS) condition. Repeated attempts to trigger this condition will result in PAN-OS entering maintenance mode.
Palo Alto Networks VM-Series, Cloud NGFW, and Prisma Access are not affected.
This issue only affects PA-800 Series, PA-3200 Series, PA-5200 Series, and PA-7000 Series running these specific versions of PAN-OS:
* 10.2.7-h12
* 10.2.8-h10
* 10.2.9-h9
* 10.2.9-h11
* 10.2.10-h2
* 10.2.10-h3
* 10.2.11
* 10.2.11-h1
* 10.2.11-h2
* 10.2.11-h3
* 11.1.2-h9
* 11.1.2-h12
* 11.1.3-h2
* 11.1.3-h4
* 11.1.3-h6
* 11.2.2
* 11.2.2-h1 |
| A vulnerability classified as problematic was found in GNU cflow up to 1.8. Affected by this vulnerability is the function yylex of the file c.c of the component Lexer. The manipulation leads to null pointer dereference. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. |
| A NULL pointer dereference vulnerability has been identified in the JavaScript library microlight version 0.0.7, a lightweight syntax highlighting library. When processing elements with non-standard CSS color values, the library fails to validate the result of a regular expression match before accessing its properties, leading to an uncaught TypeError and potential application crash. NOTE: this is disputed by multiple parties because there is no common scenario in which an adversary can insert those non-standard values. |
| A bug in Micrium OS Network HTTP Server permits an invalid pointer dereference during header processing - potentially allowing a device crash and Denial of Service. |
| libglxproto.c in OpenGL libglvnd bb06db5a was discovered to contain a segmentation violation via the function glXGetDrawableScreen(). NOTE: this is disputed because there are no common situations in which users require uninterrupted operation with an attacker-controller server. |
| The memory allocation function ACPI_ALLOCATE_ZEROED does not guarantee a
successful allocation, but the subsequent code directly dereferences the
pointer that receives it, which may lead to null pointer dereference.
To fix this issue, a null pointer check should be added. If it is null,
return exception code AE_NO_MEMORY. |
| Cesanta Mongoose commit b316989 was discovered to contain a NULL pointer dereference via the scpy function at src/fmt.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted MQTT packet. |
| The O-RAN E2T I-Release buildPrometheusList function can have a NULL pointer dereference because peerInfo can be NULL. |
