Search vulnerabilities

Results 430,239

CVE-2026-99672

can: protect the receive lists with a per-device lock

In the Linux kernel, the following vulnerability has been resolved: can: protect the receive lists with a per-device lock The receive lists of a CAN device are located in the device's can_ml_priv and travel with the device when it is moved to another network namespace. But they are protected by the per-netns rcvlists_lock. So can_rx_unregister() needs dev_net(dev) to pick the right lock and silently returns when the passed namespace does not match dev_net(dev) anymore. isotp_release() and bcm_release() leave their notifier list before they take any lock that serializes against the netdev notifier, which runs under RTNL. When the bound device is moved to another namespace in this window, the notifier skips the socket and the release path has to remove the filters itself. isotp_release() passes the socket's namespace, which does not match dev_net(dev) anymore. bcm_rx_unreg() passes dev_net(dev), which can_rx_unregister() reads again for its check, so a namespace change between both reads makes the check fail as well. In both cases can_rx_unregister() silently returns. As can_rx_register() stores rcv->sk without a reference, the remaining receivers point to the freed socket (isotp) or the freed op (bcm): BUG: KASAN: use-after-free in isotp_rcv+0x1570/0x24d0 Read of size 1 at addr ffff888118130552 by task isotp_ns_uaf/578 can_rcv_filter+0x4af/0x8c0 can_receive+0x28d/0x3c0 can_rcv+0x2a9/0x310 __netif_receive_skb_one_core+0x21a/0x260 process_backlog+0x210/0x760 Besides this, the lists of a device are protected by the rcvlists_lock of the namespace that is passed in. Callers which pass dev_net(dev) read it at different times, so the same lists may be modified under the locks of different namespaces while the device is moved. Taking RTNL in these release paths is no option: raw_bind(), raw_setsockopt() and raw_release() already hold RTNL while adding and removing up to CAN_RAW_FILTER_MAX filters per socket, which unprivileged users can trigger repeatedly and which makes RTNL a global bottleneck. Instead fix the root cause and add a spinlock to struct can_dev_rcv_lists, which protects the receive lists of a CAN device or the 'any' CAN device lists of a namespace. It is initialized in can_set_ml_priv(), which is used by all CAN network devices. With this, can_rx_unregister() finds the subscription independently of the current namespace of the device. The protocols keep the device valid with their tracked references. The per-netns rcvlists_lock only protects the receive list statistics anymore, and CAN_RAW, CAN_BCM and CAN_ISOTP pass the namespace that has been used for can_rx_register(). So isotp_release() and bcm_release() now remove their filters correctly without RTNL, and raw_release(), raw_setsockopt(), raw_bind() and isotp_bind() do not need RTNL anymore and add and remove their filters under lock_sock(). To serialize bind() with NETDEV_UNREGISTER, bind() publishes the device inside the RCU section of its lookup, and raw_notify() and isotp_notify() recheck the bound device under lock_sock(). As RTNL does not keep NETDEV_DOWN out of bind() anymore, bind() checks IFF_UP after publishing the bound device, with a barrier pair against raw_notify() and isotp_notify(), so a down transition during bind() is still reported with ENETDOWN.

CVSS 3.1 · 5.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99684

hwrng: virtio - prevent use-after-free after a failed restore

In the Linux kernel, the following vulnerability has been resolved: hwrng: virtio - prevent use-after-free after a failed restore remove_common() frees the driver data during freeze, but does not clear vdev->priv, which points to freed memory. If probe_common() then fails during restore, a later remove or freeze can dereference the dangling pointer. Clear vdev->priv on the probe_common() error cleanup path and before freeing the driver data in remove_common(). Also reset the device and return early from remove_common() if vdev->priv is already NULL for a safe teardown after a failed restore.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99685

iommu/virtio: Reset device before deleting virtqueues on probe failure

In the Linux kernel, the following vulnerability has been resolved: iommu/virtio: Reset device before deleting virtqueues on probe failure viommu_probe() marks the device DRIVER_OK before populating the event virtqueue and registering the IOMMU device in sysfs. viommu_fill_evtq() hands the device a set of device-writable buffers through virtqueue_add_inbuf(), so from that point on the device may write into them and into the rings. If either step fails, the error path deletes the virtqueues without resetting the device first. The event buffers are allocated with devm_kmalloc_array() and are released as probe unwinds, so the device can go on writing to memory that has been freed. Reset the device before deleting the virtqueues, the way viommu_remove() already does.

CVSS 3.1 · 4.1 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-99686

vhost: fix used ring index wrap in vhost_add_used_n_in_order

In the Linux kernel, the following vulnerability has been resolved: vhost: fix used ring index wrap in vhost_add_used_n_in_order vhost_add_used_n_in_order() advances start by nheads[i] but wraps it with a single subtraction. If start + nheads[i] >= 2 * vq->num, start can remain outside the ring. With used-ring logging enabled, start > vq->num makes (vq->num - start) underflow. log_write() then sets bits beyond the dirty-log bitmap, potentially corrupting adjacent userspace memory. This is reachable on the vhost-net TX path with VIRTIO_F_IN_ORDER: done_idx can reach VHOST_NET_BATCH (64), triggering the issue with a 32-entry ring. Wrap start with a mask to keep it within the ring. VHOST_SET_VRING_NUM enforces a nonzero power-of-two ring size, allowing start to be wrapped using & (vq->num - 1).

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-130991

chromium-browser: Uninitialized resource in Media

Uninitialized resource in Media in Google Chrome prior to 158.0.8127.36 allowed a remote attacker to read memory inside the sandbox via a crafted HTML page. (Chromium security severity: Medium)

CVSS 3.1 · 4.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-133578

itsourcecode Banking Management System Donor Management manage_donation.php sql injection

A vulnerability was detected in itsourcecode Banking Management System 1.0. This impacts an unknown function of the file manage_donation.php of the component Donor Management. The manipulation of the argument ID results in sql injection. The attack may be performed from remote. The exploit is now public and may be used.

CVSS 4.0 · 6.9 Medium EPSS n/a KEV · Not listed
Vendors
CVE-2026-131229

SPL Injection through Splunk Web Vulnerability Search Dashboard Drilldowns in Splunk Enterprise Security

In Splunk Enterprise Security versions below 8.7.0, a user that holds a role with the run_collect capability could store attacker-controlled values in vulnerability data. If another user who can access the Vulnerability Search dashboard selects an affected row, Splunk Enterprise Security could run attacker-controlled Search Processing Language (SPL) commands using the permissions of the user who selects the row. The user who stores the values could then access sensitive data and modify some data available to the user who selects the row. The vulnerability is possible because the Vulnerability Search dashboard encodes data-model field values for the drilldown link but does not escape the values as SPL search literals before inserting the values into drilldown searches. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) and Network dashboards (https://help.splunk.com/en/splunk-enterprise-security-8/user-guide/8.7/analytics/network-dashboards) in the Splunk documentation.

CVSS 3.1 · 5.4 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-131291

Authorization Bypass through the REST API in Splunk SOAR

In Splunk SOAR versions below 8.8.0, a Splunk SOAR user who can edit and run playbooks for a permitted container label could associate action and callback state with a running playbook outside that container label. This could affect playbook automation for containers that the user cannot view. The vulnerability is possible because the Playbook Automation API accepts a supplied playbook run identifier without verifying that it is bound to the server-provided playbook execution context. The vulnerability requires a running playbook on a container label that the user cannot view.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-131294

Authorization Bypass through Custom Function Callbacks in Splunk SOAR

In Splunk SOAR versions below 8.8.0, an authenticated user who can edit and run playbooks on a container label could associate a custom-function callback with another playbook run. The callback could modify the state of a container outside the authorized scope for that user. The vulnerability is possible because Splunk SOAR does not bind playbook API requests to the trusted playbook run and container context.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-131295

Improper Authorization in Playbook Execution in Splunk SOAR

In Splunk SOAR versions below 8.8.0, an authenticated user with permission to create and run playbooks could start child playbooks on containers outside the authorized label, or repository scope for that user. This could expose container data and affect automation outside that scope. The vulnerability is possible because Splunk SOAR does not bind the identity used to authorize the child playbook run to the parent playbook execution context.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-131299

Extensible Markup Language External Entity Injection through the REST API in Splunk App for Stream

In Splunk App for Stream versions below 8.1.7, an unauthenticated user who can reach the Splunk App for Stream Representational State Transfer (REST) API on the management port (8089) could upload an Extensible Markup Language (XML) vocabulary file, which lets the vocabulary upload endpoint read local files accessible to the Splunk process or send outbound requests. The vulnerability is possible because the vocabulary upload endpoint parses uploaded XML without an application-level policy that blocks external entity resolution. For more information see About Splunk Stream (https://help.splunk.com/en/splunk-enterprise/collect-stream-data/install-and-configure-splunk-stream/8.1/introduction/about-splunk-stream) and restmap.conf (https://help.splunk.com/en/splunk-enterprise/administer/admin-manual/9.4/configuration-file-reference/9.4.3-configuration-file-reference/restmap.conf) in the Splunk documentation.

CVSS 3.1 · 7.5 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-104885

OpenRemote: Cross-realm MQTT session disconnect without authorization

OpenRemote is an open-source internet-of-things platform. Prior to 1.31.0, an authenticated user who obtains another user's MQTT session ID can disconnect that session across realm boundaries through the GET route GET {realm}/disconnect/{sessionID}. In manager/src/main/java/org/openremote/manager/security/UserResourceImpl.java, disconnectUserSession ignores the requested realm and calls mqttBrokerService.disconnectSession(sessionID) without checking session ownership; model/src/main/java/org/openremote/model/security/UserResource.java exposes the route without an @RolesAllowed restriction. The earlier cross-realm read-method guards did not cover this disconnect method, and same-realm users can also disconnect sessions they do not own. Session IDs are not trivially brute-forceable but may be exposed through monitoring, logs, or correlated API calls, and the unauthorized disconnect can disrupt MQTT connectivity across tenant boundaries without directly disclosing session data. This issue is fixed in 1.31.0.

CVSS 4.0 · 6.3 Medium EPSS < 1% KEV · Not listed
Vendors
Products
CVE-2026-76534

Improper Input Validation during User Account Creation through the REST API in Splunk Enterprise for Windows

In Splunk Enterprise for Windows versions below 10.4.4, 10.2.8, 10.0.11, and 9.4.16, a user that holds a role with the edit_user capability could create multiple user accounts that share the same user directory. This could expose user-specific configuration between those accounts, let one account modify configuration used by another account, or disrupt features that depend on separate user directories. The vulnerability is caused by improper validation of usernames before Splunk Enterprise performs Windows filesystem operations. Windows removes trailing periods from directory names, so distinct usernames can resolve to the same user directory. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.6/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) in the Splunk documentation.

CVSS 3.1 · 4.7 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-76535

Authentication Bypass through the RapidDiag REST API in Splunk Enterprise

In Splunk Enterprise versions below 10.6.1, 10.4.5, 10.2.9, 10.0.12, and 9.4.17, an unauthenticated user could run arbitrary Search Processing Language (SPL) searches through RapidDiag task collection as an authenticated user. With this access, the user could read or modify data and configuration available to that authenticated user. The vulnerability is possible because Splunk Enterprise accepts an empty shared secret when it authenticates RapidDiag task-collection requests. For more information see Using RapidDiag (https://help.splunk.com/en/splunk-enterprise/administer/troubleshoot/9.3/contact-splunk-support/using-rapiddiag) in the Splunk documentation.

CVSS 3.1 · 9.1 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-76536

Authentication Bypass through the Cluster Configuration REST API in Splunk Enterprise

In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.17, an unauthenticated user could use an empty clustering shared secret to read and modify clustering configuration through the cluster configuration Representational State Transfer (REST) API endpoint on a standalone instance. This could expose clustering configuration, persist attacker-controlled clustering settings, and disrupt clustering operations. The vulnerability is possible because Splunk Enterprise accepts the empty clustering shared secret as a shared-authentication candidate on a standalone instance when clustering is turned off.

CVSS 3.1 · 9.4 Critical EPSS < 1% KEV · Not listed
Vendors
CVE-2026-76539

Improper Access Control through the REST API in Splunk Enterprise

In Splunk Enterprise versions below 10.4.4, 10.2.9, 10.0.12, and 9.4.16, a user who does not hold the "admin" or "power" Splunk roles could use the search jobs Representational State Transfer (REST) API to access indexed events that the srchFilter setting for the role should hide. The same user could also run internal Search Processing Language (SPL) commands and bypass SPL safeguards for risky commands within indexes that the role can search. The vulnerability is possible because Splunk Enterprise does not correctly escape required field values before it includes them in an internally generated search. For more information, see Search endpoint descriptions (https://help.splunk.com/en/splunk-enterprise/rest-api-reference/9.4/search-endpoints/search-endpoint-descriptions), authorize.conf (https://help.splunk.com/en/splunk-enterprise/administer/admin-manual/10.4/configuration-file-reference/10.4.5-configuration-file-reference/authorize.conf), and SPL safeguards for risky commands (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.6/best-practices-for-splunk-platform-security/spl-safeguards-for-risky-commands).

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-76540

Improper Authorization through the REST API in Splunk Enterprise

In Splunk Enterprise versions below 9.4.17, 10.0.12, 10.2.9, and 10.4.5, a user who does not hold the "admin" or "power" Splunk roles can configure a metric alert through the Representational State Transfer (REST) API that runs a search with elevated privileges. The vulnerability lets the user access or modify data and disrupt the Splunk Enterprise instance. The vulnerability occurs because Splunk Enterprise does not enforce the required role-based authorization when it processes metric alert configuration through the REST API. Splunk Enterprise schedules the resulting search with elevated authorization and runs attacker-controlled search processing with that authorization. For more information see About configuring role-based user access (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.6/manage-splunk-platform-users-and-roles/about-configuring-role-based-user-access) in the Splunk documentation.

CVSS 3.1 · 8.8 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-76541

SPL Injection through Data Model Calculations in Splunk Enterprise

In Splunk Enterprise versions below 10.6.0, 10.4.5, 10.2.9, 10.0.12, and 9.4.17, a user who holds the "power" Splunk role could store attacker-controlled Search Processing Language (SPL) in a shared data model calculation. When a user who can run a search against the shared data model runs one, the injected SPL can run using the permissions of the user who ran the search. This could expose sensitive credentials to the user who created the shared data model. The vulnerability is possible because Splunk Enterprise does not safely neutralize data model calculation fields before it includes them in generated searches. For more information see About data models (https://help.splunk.com/en/splunk-enterprise/manage-knowledge-objects/knowledge-management-manual/10.4/build-a-data-model/about-data-models) in the Splunk documentation. For more information see Define roles on the Splunk platform with capabilities (https://help.splunk.com/en/splunk-enterprise/administer/manage-users-and-security/10.4/manage-splunk-platform-users-and-roles/define-roles-on-the-splunk-platform-with-capabilities) in the Splunk documentation.

CVSS 3.1 · 4.8 Medium EPSS < 1% KEV · Not listed
Vendors
CVE-2026-76544

SPL Injection through Metric Alert Filters in Splunk Enterprise

In Splunk Enterprise versions below 10.4.5, 10.2.9, 10.0.12, and 9.4.16, a user who does not hold the "admin" or "power" Splunk roles could cause scheduled metric alert searches to run arbitrary Search Processing Language (SPL) commands and access credentials stored in cleartext. This requires at least one non-internal metric index on the instance. The vulnerability is possible because Splunk Enterprise does not fully validate metric alert filter input before using it in a scheduled search.

CVSS 3.1 · 8.1 High EPSS < 1% KEV · Not listed
Vendors
CVE-2026-76545

Information Disclosure through the REST API and Splunk Web in Splunk Enterprise

In Splunk Enterprise versions below 10.6.1, 10.4.5, 10.2.9, 10.0.12, and 9.4.17, an unauthenticated user could determine whether a username exists through the Representational State Transfer (REST) API or Splunk Web and lock out existing user accounts through repeated login attempts. The vulnerability is possible because Splunk Enterprise returns different login failure responses for locked existing user accounts and nonexistent usernames.

CVSS 3.1 · 6.5 Medium EPSS < 1% KEV · Not listed
Vendors