| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on MX Series allows an unauthenticated, network-based attacker to bypass the configured firewall filter and access the control-plane of the device.
On MX platforms with
MPC10, MPC11, LC4800 or LC9600
line cards, and MX304, firewall filters applied on a loopback interface lo0.n (where n is a non-0 number) don't get executed when lo0.n is in the global VRF / default routing-instance.
An affected configuration would be:
user@host# show configuration interfaces lo0 | display set
set interfaces lo0 unit 1 family inet filter input <filter-name>
where a firewall filter is applied to a non-0 loopback interface, but that loopback interface is not referred to in any routing-instance (RI) configuration, which implies that it's used in the default RI.
The issue can be observed with the CLI command:
user@device> show firewall counter filter <filter_name>
not showing any matches.
This issue affects Junos OS on MX Series:
* all versions before 23.2R2-S6,
* 23.4 versions before 23.4R2-S7,
* 24.2 versions before 24.2R2,
* 24.4 versions before 24.4R2. |
| Tmds.DBus provides .NET libraries for working with D-Bus from .NET. Tmds.DBus and Tmds.DBus.Protocol are vulnerable to malicious D-Bus peers. A peer on the same bus can spoof signals by impersonating the owner of a well-known name, exhaust system resources or cause file descriptor spillover by sending messages with an excessive number of Unix file descriptors, and crash the application by sending malformed message bodies that cause unhandled exceptions on the SynchronizationContext. This vulnerability is fixed in Tmds.DBus 0.92.0 and Tmds.DBus.Protocol 0.92.0 and 0.21.3. |
| An Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Juniper Networks Junos Space allows an attacker to inject script tags in the
list filter field that, when visited by another user, enables the attacker to execute commands with the target's permissions, including an administrator.
This issue affects all versions of Junos Space before 24.1R5 Patch V3. |
| A weakness has been identified in Totolink A7100RU 7.4cu.2313_b20191024. Impacted is the function setMiniuiHomeInfoShow of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Executing a manipulation of the argument lan_info can lead to os command injection. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. |
| A vulnerability was identified in Totolink A7100RU 7.4cu.2313_b20191024. The impacted element is the function setDmzCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument wanIdx leads to os command injection. The attack may be performed from remote. The exploit is publicly available and might be used. |
| A security flaw has been discovered in Totolink A7100RU 7.4cu.2313_b20191024. This issue affects the function setTelnetCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument telnet_enabled results in os command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. |
| A vulnerability was detected in Totolink A7100RU 7.4cu.2313_b20191024. The impacted element is the function setLoginPasswordCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument admpass results in os command injection. It is possible to launch the attack remotely. The exploit is now public and may be used. |
| A security vulnerability has been detected in Totolink A7100RU 7.4cu.2313_b20191024. Impacted is the function setPptpServerCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument enable leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed publicly and may be used. |
| A vulnerability was detected in Totolink A7100RU 7.4cu.2313_b20191024. The affected element is the function setVpnAccountCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument User results in os command injection. The attack may be launched remotely. The exploit is now public and may be used. |
| OpenStack Skyline before 5.0.1, 6.0.0, and 7.0.0 has a DOM-based Cross-Site Scripting (XSS) vulnerability in the console because document.write is used unsafely, which is relevant in scenarios where administrators use the console web interface to view instance console logs. |
| A vulnerability was identified in Totolink A7100RU 7.4cu.2313_b20191024. This affects the function setSyslogCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Such manipulation of the argument enable leads to os command injection. It is possible to launch the attack remotely. The exploit is publicly available and might be used. |
| A security flaw has been discovered in Totolink A7100RU 7.4cu.2313_b20191024. This vulnerability affects the function setPortalConfWeChat of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. Performing a manipulation of the argument enable results in os command injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. |
| A flaw has been found in Totolink A7100RU 7.4cu.2313_b20191024. The impacted element is the function setAccessDeviceCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. This manipulation of the argument mac causes os command injection. The attack can be initiated remotely. The exploit has been published and may be used. |
| A vulnerability has been found in Totolink A7100RU 7.4cu.2313_b20191024. This vulnerability affects the function setDiagnosisCfg of the file /cgi-bin/cstecgi.cgi of the component CGI Handler. The manipulation of the argument ip leads to os command injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. |
| Hereta ETH-IMC408M firmware version 1.0.15 and prior contain a reflected cross-site scripting vulnerability in the Network Diagnosis ping function that allows attackers to execute arbitrary JavaScript. Attackers can craft malicious links with injected script payloads in the ping_ipaddr parameter to compromise authenticated administrator sessions when the links are visited. |
| Hereta ETH-IMC408M firmware version 1.0.15 and prior contain a stored cross-site scripting vulnerability that allows authenticated attackers to inject arbitrary JavaScript by manipulating the Device Location field. Attackers can inject malicious scripts through the System Status interface that execute in browsers of users viewing the status page without input sanitation. |
| Hereta ETH-IMC408M firmware version 1.0.15 and prior contain a stored cross-site scripting vulnerability that allows authenticated attackers to inject arbitrary JavaScript by manipulating the Device Name field. Attackers can inject malicious scripts through the System Status interface that execute in browsers of users viewing the status page without input sanitation. |
| A vulnerability was identified in projectworlds Lawyer Management System 1.0. This issue affects some unknown processing of the file /lawyers.php. The manipulation of the argument first_Name leads to cross site scripting. The attack may be initiated remotely. The exploit is publicly available and might be used. |
| Ulloady is a file uploader script with multi-file upload support. A Stored Cross-Site Scripting (XSS) vulnerability exists in versions prior to 3.1.2 due to improper sanitization of filenames during the file upload process. An attacker can upload a file with a malicious filename containing JavaScript code, which is later rendered in the application without proper escaping. When the filename is displayed in the file list or file details page, the malicious script executes in the browser of any user who views the page. Version 3.1.2 fixes the issue. |
| OpenHands is software for AI-driven development. Starting in version 1.5.0, a Command Injection vulnerability exists in the `get_git_diff()` method at `openhands/runtime/utils/git_handler.py:134`. The `path` parameter from the `/api/conversations/{conversation_id}/git/diff` API endpoint is passed unsanitized to a shell command, allowing authenticated attackers to execute arbitrary commands in the agent sandbox. The user is already allowed to instruct the agent to execute commands, but this bypasses the normal channels. Version 1.5.0 fixes the issue. |
