| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: Fix memory corruption due to not set vif driver data size
The struct ieee80211_vif contains trailing space for vif driver data,
when struct ieee80211_vif is allocated, the total memory size that is
allocated is sizeof(struct ieee80211_vif) + size of vif driver data.
The size of vif driver data is set by each WiFi driver as needed.
The RSI911x driver does not set vif driver data size, no trailing space
for vif driver data is therefore allocated past struct ieee80211_vif .
The RSI911x driver does however use the vif driver data to store its
vif driver data structure "struct vif_priv". An access to vif->drv_priv
leads to access out of struct ieee80211_vif bounds and corruption of
some memory.
In case of the failure observed locally, rsi_mac80211_add_interface()
would write struct vif_priv *vif_info = (struct vif_priv *)vif->drv_priv;
vif_info->vap_id = vap_idx. This write corrupts struct fq_tin member
struct list_head new_flows . The flow = list_first_entry(head, struct
fq_flow, flowchain); in fq_tin_reset() then reports non-NULL bogus
address, which when accessed causes a crash.
The trigger is very simple, boot the machine with init=/bin/sh , mount
devtmpfs, sysfs, procfs, and then do "ip link set wlan0 up", "sleep 1",
"ip link set wlan0 down" and the crash occurs.
Fix this by setting the correct size of vif driver data, which is the
size of "struct vif_priv", so that memory is allocated and the driver
can store its driver data in it, instead of corrupting memory around
it. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/fpsimd: ptrace: Fix SVE writes on !SME systems
When SVE is supported but SME is not supported, a ptrace write to the
NT_ARM_SVE regset can place the tracee into an invalid state where
(non-streaming) SVE register data is stored in FP_STATE_SVE format but
TIF_SVE is clear. This can result in a later warning from
fpsimd_restore_current_state(), e.g.
WARNING: CPU: 0 PID: 7214 at arch/arm64/kernel/fpsimd.c:383 fpsimd_restore_current_state+0x50c/0x748
When this happens, fpsimd_restore_current_state() will set TIF_SVE,
placing the task into the correct state. This occurs before any other
check of TIF_SVE can possibly occur, as other checks of TIF_SVE only
happen while the FPSIMD/SVE/SME state is live. Thus, aside from the
warning, there is no functional issue.
This bug was introduced during rework to error handling in commit:
9f8bf718f2923 ("arm64/fpsimd: ptrace: Gracefully handle errors")
... where the setting of TIF_SVE was moved into a block which is only
executed when system_supports_sme() is true.
Fix this by removing the system_supports_sme() check. This ensures that
TIF_SVE is set for (SVE-formatted) writes to NT_ARM_SVE, at the cost of
unconditionally manipulating the tracee's saved svcr value. The
manipulation of svcr is benign and inexpensive, and we already do
similar elsewhere (e.g. during signal handling), so I don't think it's
worth guarding this with system_supports_sme() checks.
Aside from the above, there is no functional change. The 'type' argument
to sve_set_common() is only set to ARM64_VEC_SME (in ssve_set())) when
system_supports_sme(), so the ARM64_VEC_SME case in the switch statement
is still unreachable when !system_supports_sme(). When
CONFIG_ARM64_SME=n, the only caller of sve_set_common() is sve_set(),
and the compiler can constant-fold for the case where type is
ARM64_VEC_SVE, removing the logic for other cases. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: move SCTP_CMD_ASSOC_SHKEY right after SCTP_CMD_PEER_INIT
A null-ptr-deref was reported in the SCTP transmit path when SCTP-AUTH key
initialization fails:
==================================================================
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
CPU: 0 PID: 16 Comm: ksoftirqd/0 Tainted: G W 6.6.0 #2
RIP: 0010:sctp_packet_bundle_auth net/sctp/output.c:264 [inline]
RIP: 0010:sctp_packet_append_chunk+0xb36/0x1260 net/sctp/output.c:401
Call Trace:
sctp_packet_transmit_chunk+0x31/0x250 net/sctp/output.c:189
sctp_outq_flush_data+0xa29/0x26d0 net/sctp/outqueue.c:1111
sctp_outq_flush+0xc80/0x1240 net/sctp/outqueue.c:1217
sctp_cmd_interpreter.isra.0+0x19a5/0x62c0 net/sctp/sm_sideeffect.c:1787
sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline]
sctp_do_sm+0x1a3/0x670 net/sctp/sm_sideeffect.c:1169
sctp_assoc_bh_rcv+0x33e/0x640 net/sctp/associola.c:1052
sctp_inq_push+0x1dd/0x280 net/sctp/inqueue.c:88
sctp_rcv+0x11ae/0x3100 net/sctp/input.c:243
sctp6_rcv+0x3d/0x60 net/sctp/ipv6.c:1127
The issue is triggered when sctp_auth_asoc_init_active_key() fails in
sctp_sf_do_5_1C_ack() while processing an INIT_ACK. In this case, the
command sequence is currently:
- SCTP_CMD_PEER_INIT
- SCTP_CMD_TIMER_STOP (T1_INIT)
- SCTP_CMD_TIMER_START (T1_COOKIE)
- SCTP_CMD_NEW_STATE (COOKIE_ECHOED)
- SCTP_CMD_ASSOC_SHKEY
- SCTP_CMD_GEN_COOKIE_ECHO
If SCTP_CMD_ASSOC_SHKEY fails, asoc->shkey remains NULL, while
asoc->peer.auth_capable and asoc->peer.peer_chunks have already been set by
SCTP_CMD_PEER_INIT. This allows a DATA chunk with auth = 1 and shkey = NULL
to be queued by sctp_datamsg_from_user().
Since command interpretation stops on failure, no COOKIE_ECHO should been
sent via SCTP_CMD_GEN_COOKIE_ECHO. However, the T1_COOKIE timer has already
been started, and it may enqueue a COOKIE_ECHO into the outqueue later. As
a result, the DATA chunk can be transmitted together with the COOKIE_ECHO
in sctp_outq_flush_data(), leading to the observed issue.
Similar to the other places where it calls sctp_auth_asoc_init_active_key()
right after sctp_process_init(), this patch moves the SCTP_CMD_ASSOC_SHKEY
immediately after SCTP_CMD_PEER_INIT, before stopping T1_INIT and starting
T1_COOKIE. This ensures that if shared key generation fails, authenticated
DATA cannot be sent. It also allows the T1_INIT timer to retransmit INIT,
giving the client another chance to process INIT_ACK and retry key setup. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath10k: fix dma_free_coherent() pointer
dma_alloc_coherent() allocates a DMA mapped buffer and stores the
addresses in XXX_unaligned fields. Those should be reused when freeing
the buffer rather than the aligned addresses. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: annotate data-races around slave->last_rx
slave->last_rx and slave->target_last_arp_rx[...] can be read and written
locklessly. Add READ_ONCE() and WRITE_ONCE() annotations.
syzbot reported:
BUG: KCSAN: data-race in bond_rcv_validate / bond_rcv_validate
write to 0xffff888149f0d428 of 8 bytes by interrupt on cpu 1:
bond_rcv_validate+0x202/0x7a0 drivers/net/bonding/bond_main.c:3335
bond_handle_frame+0xde/0x5e0 drivers/net/bonding/bond_main.c:1533
__netif_receive_skb_core+0x5b1/0x1950 net/core/dev.c:6039
__netif_receive_skb_one_core net/core/dev.c:6150 [inline]
__netif_receive_skb+0x59/0x270 net/core/dev.c:6265
netif_receive_skb_internal net/core/dev.c:6351 [inline]
netif_receive_skb+0x4b/0x2d0 net/core/dev.c:6410
...
write to 0xffff888149f0d428 of 8 bytes by interrupt on cpu 0:
bond_rcv_validate+0x202/0x7a0 drivers/net/bonding/bond_main.c:3335
bond_handle_frame+0xde/0x5e0 drivers/net/bonding/bond_main.c:1533
__netif_receive_skb_core+0x5b1/0x1950 net/core/dev.c:6039
__netif_receive_skb_one_core net/core/dev.c:6150 [inline]
__netif_receive_skb+0x59/0x270 net/core/dev.c:6265
netif_receive_skb_internal net/core/dev.c:6351 [inline]
netif_receive_skb+0x4b/0x2d0 net/core/dev.c:6410
br_netif_receive_skb net/bridge/br_input.c:30 [inline]
NF_HOOK include/linux/netfilter.h:318 [inline]
...
value changed: 0x0000000100005365 -> 0x0000000100005366 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: provide locking for v4_end_grace
Writing to v4_end_grace can race with server shutdown and result in
memory being accessed after it was freed - reclaim_str_hashtbl in
particularly.
We cannot hold nfsd_mutex across the nfsd4_end_grace() call as that is
held while client_tracking_op->init() is called and that can wait for
an upcall to nfsdcltrack which can write to v4_end_grace, resulting in a
deadlock.
nfsd4_end_grace() is also called by the landromat work queue and this
doesn't require locking as server shutdown will stop the work and wait
for it before freeing anything that nfsd4_end_grace() might access.
However, we must be sure that writing to v4_end_grace doesn't restart
the work item after shutdown has already waited for it. For this we
add a new flag protected with nn->client_lock. It is set only while it
is safe to make client tracking calls, and v4_end_grace only schedules
work while the flag is set with the spinlock held.
So this patch adds a nfsd_net field "client_tracking_active" which is
set as described. Another field "grace_end_forced", is set when
v4_end_grace is written. After this is set, and providing
client_tracking_active is set, the laundromat is scheduled.
This "grace_end_forced" field bypasses other checks for whether the
grace period has finished.
This resolves a race which can result in use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mscc: ocelot: Fix crash when adding interface under a lag
Commit 15faa1f67ab4 ("lan966x: Fix crash when adding interface under a lag")
fixed a similar issue in the lan966x driver caused by a NULL pointer dereference.
The ocelot_set_aggr_pgids() function in the ocelot driver has similar logic
and is susceptible to the same crash.
This issue specifically affects the ocelot_vsc7514.c frontend, which leaves
unused ports as NULL pointers. The felix_vsc9959.c frontend is unaffected as
it uses the DSA framework which registers all ports.
Fix this by checking if the port pointer is valid before accessing it. |
| In the Linux kernel, the following vulnerability has been resolved:
arp: do not assume dev_hard_header() does not change skb->head
arp_create() is the only dev_hard_header() caller
making assumption about skb->head being unchanged.
A recent commit broke this assumption.
Initialize @arp pointer after dev_hard_header() call. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: check that server is running in unlock_filesystem
If we are trying to unlock the filesystem via an administrative
interface and nfsd isn't running, it crashes the server. This
happens currently because nfsd4_revoke_states() access state
structures (eg., conf_id_hashtbl) that has been freed as a part
of the server shutdown.
[ 59.465072] Call trace:
[ 59.465308] nfsd4_revoke_states+0x1b4/0x898 [nfsd] (P)
[ 59.465830] write_unlock_fs+0x258/0x440 [nfsd]
[ 59.466278] nfsctl_transaction_write+0xb0/0x120 [nfsd]
[ 59.466780] vfs_write+0x1f0/0x938
[ 59.467088] ksys_write+0xfc/0x1f8
[ 59.467395] __arm64_sys_write+0x74/0xb8
[ 59.467746] invoke_syscall.constprop.0+0xdc/0x1e8
[ 59.468177] do_el0_svc+0x154/0x1d8
[ 59.468489] el0_svc+0x40/0xe0
[ 59.468767] el0t_64_sync_handler+0xa0/0xe8
[ 59.469138] el0t_64_sync+0x1ac/0x1b0
Ensure this can't happen by taking the nfsd_mutex and checking that
the server is still up, and then holding the mutex across the call to
nfsd4_revoke_states(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix reference count leak in bpf_prog_test_run_xdp()
syzbot is reporting
unregister_netdevice: waiting for sit0 to become free. Usage count = 2
problem. A debug printk() patch found that a refcount is obtained at
xdp_convert_md_to_buff() from bpf_prog_test_run_xdp().
According to commit ec94670fcb3b ("bpf: Support specifying ingress via
xdp_md context in BPF_PROG_TEST_RUN"), the refcount obtained by
xdp_convert_md_to_buff() will be released by xdp_convert_buff_to_md().
Therefore, we can consider that the error handling path introduced by
commit 1c1949982524 ("bpf: introduce frags support to
bpf_prog_test_run_xdp()") forgot to call xdp_convert_buff_to_md(). |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Don't store mlx5e_priv in mlx5e_dev devlink priv
mlx5e_priv is an unstable structure that can be memset(0) if profile
attaching fails, mlx5e_priv in mlx5e_dev devlink private is used to
reference the netdev and mdev associated with that struct. Instead,
store netdev directly into mlx5e_dev and get mdev from the containing
mlx5_adev aux device structure.
This fixes a kernel oops in mlx5e_remove when switchdev mode fails due
to change profile failure.
$ devlink dev eswitch set pci/0000:00:03.0 mode switchdev
Error: mlx5_core: Failed setting eswitch to offloads.
dmesg:
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: new profile init failed, -12
workqueue: Failed to create a rescuer kthread for wq "mlx5e": -EINTR
mlx5_core 0012:03:00.1: mlx5e_netdev_init_profile:6214:(pid 37199): mlx5e_priv_init failed, err=-12
mlx5_core 0012:03:00.1 gpu3rdma1: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12
$ devlink dev reload pci/0000:00:03.0 ==> oops
BUG: kernel NULL pointer dereference, address: 0000000000000520
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 3 UID: 0 PID: 521 Comm: devlink Not tainted 6.18.0-rc5+ #117 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:mlx5e_remove+0x68/0x130
RSP: 0018:ffffc900034838f0 EFLAGS: 00010246
RAX: ffff88810283c380 RBX: ffff888101874400 RCX: ffffffff826ffc45
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: ffff888102d789c0 R08: ffff8881007137f0 R09: ffff888100264e10
R10: ffffc90003483898 R11: ffffc900034838a0 R12: ffff888100d261a0
R13: ffff888100d261a0 R14: ffff8881018749a0 R15: ffff888101874400
FS: 00007f8565fea740(0000) GS:ffff88856a759000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000520 CR3: 000000010b11a004 CR4: 0000000000370ef0
Call Trace:
<TASK>
device_release_driver_internal+0x19c/0x200
bus_remove_device+0xc6/0x130
device_del+0x160/0x3d0
? devl_param_driverinit_value_get+0x2d/0x90
mlx5_detach_device+0x89/0xe0
mlx5_unload_one_devl_locked+0x3a/0x70
mlx5_devlink_reload_down+0xc8/0x220
devlink_reload+0x7d/0x260
devlink_nl_reload_doit+0x45b/0x5a0
genl_family_rcv_msg_doit+0xe8/0x140 |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Ensure swevent hrtimer is properly destroyed
With the change to hrtimer_try_to_cancel() in
perf_swevent_cancel_hrtimer() it appears possible for the hrtimer to
still be active by the time the event gets freed.
Make sure the event does a full hrtimer_cancel() on the free path by
installing a perf_event::destroy handler. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix memory leak of flow steer list on rmmod
The flow steering list maintains entries that are added and removed as
ethtool creates and deletes flow steering rules. Module removal with active
entries causes memory leak as the list is not properly cleaned up.
Prevent this by iterating through the remaining entries in the list and
freeing the associated memory during module removal. Add a spinlock
(flow_steer_list_lock) to protect the list access from multiple threads. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Fix kvm_device leak in kvm_pch_pic_destroy()
In kvm_ioctl_create_device(), kvm_device has allocated memory,
kvm_device->destroy() seems to be supposed to free its kvm_device
struct, but kvm_pch_pic_destroy() is not currently doing this, that
would lead to a memory leak.
So, fix it. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: fix kmemleak by releasing references to fault configfs items
When CONFIG_BLK_DEV_NULL_BLK_FAULT_INJECTION is enabled, the null-blk
driver sets up fault injection support by creating the timeout_inject,
requeue_inject, and init_hctx_fault_inject configfs items as children
of the top-level nullbX configfs group.
However, when the nullbX device is removed, the references taken to
these fault-config configfs items are not released. As a result,
kmemleak reports a memory leak, for example:
unreferenced object 0xc00000021ff25c40 (size 32):
comm "mkdir", pid 10665, jiffies 4322121578
hex dump (first 32 bytes):
69 6e 69 74 5f 68 63 74 78 5f 66 61 75 6c 74 5f init_hctx_fault_
69 6e 6a 65 63 74 00 88 00 00 00 00 00 00 00 00 inject..........
backtrace (crc 1a018c86):
__kmalloc_node_track_caller_noprof+0x494/0xbd8
kvasprintf+0x74/0xf4
config_item_set_name+0xf0/0x104
config_group_init_type_name+0x48/0xfc
fault_config_init+0x48/0xf0
0xc0080000180559e4
configfs_mkdir+0x304/0x814
vfs_mkdir+0x49c/0x604
do_mkdirat+0x314/0x3d0
sys_mkdir+0xa0/0xd8
system_call_exception+0x1b0/0x4f0
system_call_vectored_common+0x15c/0x2ec
Fix this by explicitly releasing the references to the fault-config
configfs items when dropping the reference to the top-level nullbX
configfs group. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: omap-dma: fix dma_pool resource leak in error paths
The dma_pool created by dma_pool_create() is not destroyed when
dma_async_device_register() or of_dma_controller_register() fails,
causing a resource leak in the probe error paths.
Add dma_pool_destroy() in both error paths to properly release the
allocated dma_pool resource. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: Fix fence reference leak on queue teardown v2
The user mode queue keeps a pointer to the most recent fence in
userq->last_fence. This pointer holds an extra dma_fence reference.
When the queue is destroyed, we free the fence driver and its xarray,
but we forgot to drop the last_fence reference.
Because of the missing dma_fence_put(), the last fence object can stay
alive when the driver unloads. This leaves an allocated object in the
amdgpu_userq_fence slab cache and triggers
This is visible during driver unload as:
BUG amdgpu_userq_fence: Objects remaining on __kmem_cache_shutdown()
kmem_cache_destroy amdgpu_userq_fence: Slab cache still has objects
Call Trace:
kmem_cache_destroy
amdgpu_userq_fence_slab_fini
amdgpu_exit
__do_sys_delete_module
Fix this by putting userq->last_fence and clearing the pointer during
amdgpu_userq_fence_driver_free().
This makes sure the fence reference is released and the slab cache is
empty when the module exits.
v2: Update to only release userq->last_fence with dma_fence_put()
(Christian)
(cherry picked from commit 8e051e38a8d45caf6a866d4ff842105b577953bb) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211_hwsim: fix typo in frequency notification
The NAN notification is for 5745 MHz which corresponds to channel 149
and not 5475 which is not actually a valid channel. This could result in
a NULL pointer dereference in cfg80211_next_nan_dw_notif. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Do not over-allocate ftrace memory
The pg_remaining calculation in ftrace_process_locs() assumes that
ENTRIES_PER_PAGE multiplied by 2^order equals the actual capacity of the
allocated page group. However, ENTRIES_PER_PAGE is PAGE_SIZE / ENTRY_SIZE
(integer division). When PAGE_SIZE is not a multiple of ENTRY_SIZE (e.g.
4096 / 24 = 170 with remainder 16), high-order allocations (like 256 pages)
have significantly more capacity than 256 * 170. This leads to pg_remaining
being underestimated, which in turn makes skip (derived from skipped -
pg_remaining) larger than expected, causing the WARN(skip != remaining)
to trigger.
Extra allocated pages for ftrace: 2 with 654 skipped
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7295 ftrace_process_locs+0x5bf/0x5e0
A similar problem in ftrace_allocate_records() can result in allocating
too many pages. This can trigger the second warning in
ftrace_process_locs().
Extra allocated pages for ftrace
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7276 ftrace_process_locs+0x548/0x580
Use the actual capacity of a page group to determine the number of pages
to allocate. Have ftrace_allocate_pages() return the number of allocated
pages to avoid having to calculate it. Use the actual page group capacity
when validating the number of unused pages due to skipped entries.
Drop the definition of ENTRIES_PER_PAGE since it is no longer used. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: riic: Move suspend handling to NOIRQ phase
Commit 53326135d0e0 ("i2c: riic: Add suspend/resume support") added
suspend support for the Renesas I2C driver and following this change
on RZ/G3E the following WARNING is seen on entering suspend ...
[ 134.275704] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 134.285536] ------------[ cut here ]------------
[ 134.290298] i2c i2c-2: Transfer while suspended
[ 134.295174] WARNING: drivers/i2c/i2c-core.h:56 at __i2c_smbus_xfer+0x1e4/0x214, CPU#0: systemd-sleep/388
[ 134.365507] Tainted: [W]=WARN
[ 134.368485] Hardware name: Renesas SMARC EVK version 2 based on r9a09g047e57 (DT)
[ 134.375961] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 134.382935] pc : __i2c_smbus_xfer+0x1e4/0x214
[ 134.387329] lr : __i2c_smbus_xfer+0x1e4/0x214
[ 134.391717] sp : ffff800083f23860
[ 134.395040] x29: ffff800083f23860 x28: 0000000000000000 x27: ffff800082ed5d60
[ 134.402226] x26: 0000001f4395fd74 x25: 0000000000000007 x24: 0000000000000001
[ 134.409408] x23: 0000000000000000 x22: 000000000000006f x21: ffff800083f23936
[ 134.416589] x20: ffff0000c090e140 x19: ffff0000c090e0d0 x18: 0000000000000006
[ 134.423771] x17: 6f63657320313030 x16: 2e30206465737061 x15: ffff800083f23280
[ 134.430953] x14: 0000000000000000 x13: ffff800082b16ce8 x12: 0000000000000f09
[ 134.438134] x11: 0000000000000503 x10: ffff800082b6ece8 x9 : ffff800082b16ce8
[ 134.445315] x8 : 00000000ffffefff x7 : ffff800082b6ece8 x6 : 80000000fffff000
[ 134.452495] x5 : 0000000000000504 x4 : 0000000000000000 x3 : 0000000000000000
[ 134.459672] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0000c9ee9e80
[ 134.466851] Call trace:
[ 134.469311] __i2c_smbus_xfer+0x1e4/0x214 (P)
[ 134.473715] i2c_smbus_xfer+0xbc/0x120
[ 134.477507] i2c_smbus_read_byte_data+0x4c/0x84
[ 134.482077] isl1208_i2c_read_time+0x44/0x178 [rtc_isl1208]
[ 134.487703] isl1208_rtc_read_time+0x14/0x20 [rtc_isl1208]
[ 134.493226] __rtc_read_time+0x44/0x88
[ 134.497012] rtc_read_time+0x3c/0x68
[ 134.500622] rtc_suspend+0x9c/0x170
The warning is triggered because I2C transfers can still be attempted
while the controller is already suspended, due to inappropriate ordering
of the system sleep callbacks.
If the controller is autosuspended, there is no way to wake it up once
runtime PM disabled (in suspend_late()). During system resume, the I2C
controller will be available only after runtime PM is re-enabled
(in resume_early()). However, this may be too late for some devices.
Wake up the controller in the suspend() callback while runtime PM is
still enabled. The I2C controller will remain available until the
suspend_noirq() callback (pm_runtime_force_suspend()) is called. During
resume, the I2C controller can be restored by the resume_noirq() callback
(pm_runtime_force_resume()). Finally, the resume() callback re-enables
autosuspend. As a result, the I2C controller can remain available until
the system enters suspend_noirq() and from resume_noirq(). |
