| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| If the auth responds very slowly and the records expire in between, the capping of TTLs is not enforced for lack of data. This does not happen on regular resolve as then then the
child records are used immediately if not expired and thus valid, or the
records are expired, and in that case not used. So this case
can only happen if almost expired records are used to refresh the
authoritative NS records. |
| Knot Resolver before 6.4.1 allows remote code execution via a heap-based buffer overflow in the DoQ (DNS-over-QUIC) receive path. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: guest_memfd: Treat memslot binding offset+size as unsigned values
When binding a memslot to a guest_memfd file, treat the offset and size as
unsigned values to fix a bug where the sum of the two can result in a false
negative when checking for overflow against the size of the file. Passing
unsigned values also avoids relying on somewhat obscure checks in other
flows for safety, and tracks the offset and size as they are intended to be
tracked, as unsigned values.
On 64-bit kernels, the number of pages a memslot contains and thus the size
(and offset) of its guest_memfd binding are unsigned 64-bit values. Taking
the offset+size as an loff_t instead of a uoff_t inadvertently converts
the unsigned value to a signed value if the offset and/or size is massive.
Locally storing the offset and size as signed values is benign in and of
itself (though even that is *extremely* difficult to discern), but
operating on their sum is not.
For the offset, KVM explicitly checks against a negative value, which might
seem like a bug as KVM could incorrectly reject a legitimate binding, but
that's not actually the case as KVM_CREATE_GUEST_MEMFD takes a signed value
for its size, i.e. a would-be-negative offset is also greater than the
maximum possible size of any guest_memfd file.
Regarding the size, while KVM lacks an explicit check for a negative value,
i.e. seemingly has a flawed overflow check, KVM restricts the number of
pages in a single memslot to the largest positive signed 32-bit value:
if (id < KVM_USER_MEM_SLOTS &&
(mem->memory_size >> PAGE_SHIFT) > KVM_MEM_MAX_NR_PAGES)
return -EINVAL;
and so that maximum "size" will ever be is 0x7fffffff000.
The sum of the two is, however, problematic. While the size is restricted
by KVM's memslot logic, the offset is not, i.e. the offset is completely
unchecked until the "offset + size > i_size_read(inode)" check. If the
offset is the (nearly) largest possible _positive_ value, then adding size
to the offset can result in a signed, negative 64-bit value. When compared
against the size of the file (guaranteed to be positive), the negative sum
is always smaller, and KVM incorrectly allows the absurd offset.
Opportunistically add missing includes in kvm_mm.h (instead of relying on
its parents). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Prevent out-of-bounds read in glob matching
String event fields are not necessarily NUL-terminated, so the filter
predicate functions (filter_pred_string(), filter_pred_strloc() and
filter_pred_strrelloc()) pass the field length to the regex match
callbacks, and the length-aware matchers honour it.
regex_match_glob() was the exception: it ignored the length and called
glob_match(), which scans the string until it hits a NUL byte. Some
string fields are not NUL-terminated. One example is the dynamic char
array of the xfs_* namespace tracepoints, which is copied without a
trailing NUL. For such a field, glob matching reads past the end of
the event field, causing a KASAN slab-out-of-bounds read in
glob_match(), reached via regex_match_glob() and filter_match_preds()
from the xfs_lookup tracepoint.
Add a length-bounded glob_match_len() and use it from regex_match_glob()
so glob matching always stops at the field boundary. The matching loop
is factored into a shared helper so glob_match() keeps its behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: bound Rock Ridge symlink components to the SL record
get_symlink_chunk() and the SL handling in
parse_rock_ridge_inode_internal() walk the variable-length components of
a Rock Ridge "SL" (symbolic link) record. Each component is a two-byte
header (flags, len) followed by len bytes of text, so it occupies
slp->len + 2 bytes. Both loops read slp->len and advance to the next
component, and get_symlink_chunk() additionally does
memcpy(rpnt, slp->text, slp->len), but neither checks that the component
lies within the SL record before dereferencing it.
A crafted SL record whose component declares a len that runs past the
record (rr->len) therefore triggers an out-of-bounds read of up to 255
bytes. When the record sits at the tail of its backing buffer - for
example a small kmalloc()ed continuation block reached through a CE
record - the read crosses the allocation; get_symlink_chunk() then
copies the out-of-bounds bytes into the symlink body returned to user
space by readlink(), disclosing adjacent kernel memory.
ISO 9660 images are routinely mounted from untrusted removable media -
desktop environments auto-mount them (e.g. via udisks2) without
CAP_SYS_ADMIN - so the record contents are attacker-controlled.
Reject any component that does not fit in the remaining record bytes
before using it. In get_symlink_chunk() return NULL, like the existing
output-buffer (plimit) checks, so a malformed record makes readlink()
fail with -EIO rather than silently returning a truncated target; in
parse_rock_ridge_inode_internal() stop the inode-size walk. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tcpm: Validate SVID index in svdm_consume_modes()
In svdm_consume_modes(), the SVID value is read from pmdata->svids using
pmdata->svid_index as an array index without bounds validation:
paltmode->svid = pmdata->svids[pmdata->svid_index];
If pmdata->svid_index is driven beyond SVID_DISCOVERY_MAX (16), it results
in an out-of-bounds read of the pmdata->svids array. Because pd_mode_data
is embedded inside struct tcpm_port, indexing past svids reads into
adjacent fields. In particular:
- At index 16, it reads the altmodes count.
- At index 18 and beyond, it reads into altmode_desc[], which contains
partner-supplied SVDM Discovery Modes VDOs.
By injecting a chosen SVID into altmode_desc[0].vdo and driving svid_index
to 20, the partner can force paltmode->svid to be loaded with an arbitrary,
partner- chosen SVID, which is then registered via
typec_partner_register_altmode().
Fix this by validating that pmdata->svid_index is non-negative and strictly
less than pmdata->nsvids before accessing the pmdata->svids array inside
svdm_consume_modes(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: bound bulk IN response length to the received transfer
usbio_bulk_msg() copies bpkt_len = le16_to_cpu(bpkt->len) bytes out of
the bulk IN buffer (usbio->rxbuf, allocated with size usbio->rxbuf_len)
into the caller's buffer. bpkt_len is fully controlled by the device
and is only checked against ibuf_len; ibuf_len in turn is checked
against usbio->txbuf_len, not against rxbuf_len:
if ((obuf_len > (usbio->txbuf_len - sizeof(*bpkt))) ||
(ibuf_len > (usbio->txbuf_len - sizeof(*bpkt))))
return -EMSGSIZE;
txbuf_len and rxbuf_len are taken independently from the bulk OUT and
bulk IN endpoint wMaxPacketSize in usbio_probe(). A malicious or
malfunctioning device that advertises a large bulk OUT endpoint and a
small bulk IN endpoint (e.g. by claiming one of the quirk-free IDs such
as the Lattice NX33U, 0x2ac1:0x20cb) therefore makes ibuf_len, and
hence the device-supplied bpkt_len, exceed rxbuf_len. memcpy() then
reads up to txbuf_len - rxbuf_len bytes past the end of the rxbuf slab
object. The over-read bytes are handed back to the i2c layer and on to
user space through i2c-dev, disclosing adjacent slab memory; with KASAN
this is reported as a slab-out-of-bounds read.
The number of bytes actually received is already known: act equals the
URB actual_length and is bounded by rxbuf_len. Reject any response
that claims more payload than was received, mirroring the existing
"act < sizeof(*bpkt)" check just above.
The control path (usbio_ctrl_msg()) is not affected: it uses a single
buffer (ctrlbuf) for both directions, so its analogous copy can never
leave the allocation.
Found by code review. The out-of-bounds read was confirmed under
AddressSanitizer with a faithful userspace model of usbio_bulk_msg()'s
receive path (an rxbuf_len-sized buffer, the same act/ibuf_len/bpkt_len
checks and the memcpy). A USB raw-gadget + dummy_hcd reproducer is
also available. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix double-free in SMB2_open() replay
A response-bearing attempt can return a replayable error and free its
response buffer. If SMB2_open_init() fails before the next send, cleanup
retains the previous buffer type and frees that response again.
Reset response bookkeeping before each attempt to prevent the stale free. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv4: bound TCP reordering sysctl writes and MTU probe sizes
Reject invalid `net.ipv4.tcp_reordering` values before they reach TCP
socket state. The sysctl is stored as an `int` but copied into the
`u32` `tp->reordering` field for new sockets, so negative writes wrap
to large values.
With `tcp_mtu_probing=2`, the wrapped value can overflow the
`tcp_mtu_probe()` size calculation and drive the MTU probing path into
an out-of-bounds read. Route `tcp_reordering` writes through
`proc_dointvec_minmax()` and require it to be at least 1. Also require
`tcp_max_reordering` to be at least 1 so the configured maximum cannot
become negative either.
When registering the table for a non-init network namespace, relocate
`extra2` pointers that refer into `init_net.ipv4` so the
`tcp_reordering` upper bound follows that namespace's
`tcp_max_reordering`.
Harden `tcp_mtu_probe()` itself by computing `size_needed` as `u64`.
This keeps the send queue and window checks from being bypassed through
signed integer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vce1: Fix VCE 1 firmware size and offsets
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
Make sure the stack and data offsets are aligned to
the 32K TLB size.
Check that the FW microcode actually fits in the
space that is reserved for it.
(cherry picked from commit c16fe59f622a080fc457a57b3e8f14c780699449) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/gsc: Fix double-free of managed BO in error path
The error path in xe_gsc_init_post_hwconfig() explicitly frees a BO
allocated with xe_managed_bo_create_pin_map() via
xe_bo_unpin_map_no_vm(). Since the managed BO already has a devm
cleanup action registered, this causes a double-free when devm
unwinds during probe failure.
Remove the explicit free and let devm handle it, consistent with
all other xe_managed_bo_create_pin_map() callers.
(cherry picked from commit 71d61e3e299a17139e47f980a4d6f425b2c59bf7) |
| In the Linux kernel, the following vulnerability has been resolved:
usbnet: gl620a: fix out-of-bounds read in genelink_rx_fixup()
genelink_rx_fixup() splits an aggregated RX frame into its individual
packets, using a per-packet length taken from device-supplied data. That
length is only bounded by GL_MAX_PACKET_LEN (1514); it is never compared
against how many bytes were actually received.
A malicious GeneLink (GL620A) device can therefore send a short URB whose
header claims packet_count > 1 and a first packet of up to 1514 bytes.
skb_put_data(gl_skb, packet->packet_data, size);
then copies past the end of the receive buffer and hands the adjacent slab
contents up the network stack, an out-of-bounds read that leaks kernel heap.
No privilege is required: the path runs in the usbnet RX softirq as soon as
the interface is up.
BUG: KASAN: slab-out-of-bounds in genelink_rx_fixup (drivers/net/usb/gl620a.c:112)
Read of size 1514 at addr ffff888011309708 by task ksoftirqd/0/14
Call Trace:
...
__asan_memcpy (mm/kasan/shadow.c:105)
genelink_rx_fixup (include/linux/skbuff.h:2814 drivers/net/usb/gl620a.c:112)
usbnet_bh (drivers/net/usb/usbnet.c:572 drivers/net/usb/usbnet.c:1589)
process_one_work (kernel/workqueue.c:3322)
bh_worker (kernel/workqueue.c:3405)
tasklet_action (kernel/softirq.c:965)
handle_softirqs (kernel/softirq.c:622)
run_ksoftirqd (kernel/softirq.c:1076)
...
skb_pull() already verifies that the requested length fits the buffer and
returns NULL otherwise. Move it ahead of the copy and check its result, so
a packet that overruns the received data is rejected before it is read.
Well-formed frames, whose packets are fully present, are unaffected. |
| A buffer overflow was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. A local user may be able to read kernel memory. |
| undici's setCookie function does not fully sanitize cookie attributes. In undici before 6.28.0, from 7.0.0 up to before 7.29.0, and from 8.0.0 up to before 8.9.0, a domain value is not checked for semicolons and entries in the unparsed array are not sanitized, so attacker-influenced input can inject additional cookie attributes. For example, a domain value containing a semicolon can append attributes such as SameSite, and an unparsed entry can inject attributes such as HttpOnly, without the caller setting them. Applications that pass user-controlled input to these fields, such as multi-tenant or reverse-proxy servers that scope session cookies to a tenant-supplied domain, can have SameSite CSRF protections bypassed, or the Secure, HttpOnly, and SameSite attributes forced, stripped, or overridden. The issue is fixed in undici 6.28.0, 7.29.0, and 8.9.0. |
| fast-uri before 4.1.2, 3.1.5, and 2.4.4 requires a literal double forward slash to recognize a URI authority, so a reference that uses a backslash based introducer in place of it (backslash backslash, forward slash backslash, or backslash forward slash) is parsed with no authority and folds into the path. Node's native WHATWG URL parser instead treats a backslash as interchangeable with a forward slash for special schemes, so the two parsers extract different hosts from the same input. Applications that use fast-uri to enforce host based policy such as allowlists, SSRF filtering, or redirect validation before passing the same URL into Node's URL or fetch consumers can be steered to an unintended host. Upgrade to fast-uri 4.1.2, 3.1.5, or 2.4.4. |
| Coturn is a free open source implementation of TURN and STUN Server. From 4.5.2 through 4.14.0, when Coturn is started with --acme-redirect <URL> and exposes a plaintext-TCP listener, an unauthenticated remote client can send a single ordinary HTTP GET request and receive a 301 response whose Location header contains up to ~870 bytes of adjacent process heap memory. The leaked region is a recycled network receive buffer that is reused without being zeroed, so on a busy server it can contain data from other clients' requests (TURN credentials, OAuth tokens, relayed payloads). Root cause is a signed→unsigned conversion. This issue is fixed in version 4.15.0. |
| A memory corruption issue was addressed with improved bounds checking. This issue is fixed in iOS 18.4.1 and iPadOS 18.4.1, macOS Sequoia 15.4.1, tvOS 18.4.1, visionOS 2.4.1, watchOS 11.5. Processing an audio stream in a maliciously crafted media file may result in code execution. Apple is aware of a report that this issue may have been exploited in an extremely sophisticated attack against specific targeted individuals on versions of iOS released before iOS 18.4.1. |
| In RtcpFbPacket::decodeRtcpFbPacket, there is a possible out of bounds read due to an integer overflow. This could lead to remote information disclosure with no additional execution privileges needed. User interaction is needed for exploitation. |
| Buffer Overflow vulnerability in UTT nv518G nv518GV3v3.2.7-210919-161313 allows a remote attacker to cause a denial of service via the gohead/sub_472f08 component |
| Side-channel information leakage in Safe Browsing in Google Chrome on iOS prior to 150.0.7871.47 allowed a remote attacker who had compromised the renderer process to leak cross-origin data via a crafted HTML page. (Chromium security severity: High) |
