| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Authorization Bypass Through User-Controlled Key in the payroll module in Roskus Prospero Flow CRM before 5.15.10 allows authenticated users holding the read payroll permission to view the salary and banking details of employees of any other company in the instance, and users holding the create payroll permission to create payroll records attributed to another company's employees, because the listing query is not scoped to the caller's company and the employee identifier is validated for global existence rather than company membership |
| A flaw has been found in francoisjacquet RosarioSIS up to 12.8. This affects the function DBUpdate of the file Discipline/Referrals.php. This manipulation causes authorization bypass. The attack may be initiated remotely. The exploit has been published and may be used. Upgrading to version 12.9 is able to mitigate this issue. Patch name: 04dd1a368ddf80ad7082baefa3c656e4e1825c76. It is suggested to upgrade the affected component. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Fix signed integer truncation in IPC receive
Fix potential buffer overflow where firmware-supplied data_size is cast
to signed int before being used in min_t(). Large unsigned values
(>= 0x80000000) become negative, causing unsigned wraparound and
oversized memcpy operations that can overflow the stack buffer.
Change min_t(int, ...) to min() as both values are unsigned and can be
handled by min() without explicit cast. |
| The Welcart e-Commerce WordPress plugin before 2.11.33 does not verify the authenticity of its convenience-store / bank-transfer settlement callback: an unauthenticated request can flip an order from unpaid to settled purely from an order number and a status flag, with no signature, amount, or origin check. Because these are pay-later methods, an attacker can mark their own unpaid order as settled and obtain fulfilment without paying. |
| The WP Photo Album Plus WordPress plugin before 9.2.09.002 does not check that the current user is allowed to upload into the album they target when it processes a front-end upload, allowing any authenticated user, such as a Subscriber, to upload files into albums owned by other users or by the administrator. Exploitation requires the WP Photo Album Plus WordPress plugin before 9.2.09.002's front-end user upload feature to be enabled, which is not the default. |
| Unauthenticated Privilege Escalation in miniorange otp verification <= 5.5.1 versions. |
| Unauthenticated Insecure Direct Object References (IDOR) in Do Lasso <= 358 versions. |
| Unauthenticated Broken Access Control in Nokri <= 1.6.6 versions. |
| When using Google Secrets Manager as a backend for the Spring Cloud Config server a client can craft a request to the config server potentially exposing secrets from unintended GCP projects.
Spring Cloud Config 3.1.x: affected from 3.1.0 through 3.1.13 (inclusive); upgrade to 3.1.14 or greater (Enterprise Support Only). Spring Cloud Config 4.1.x: affected from 4.1.0 through 4.1.9 (inclusive); upgrade to 4.1.10 or greater (Enterprise Support Only). Spring Cloud Config 4.2.x: affected from 4.2.0 through 4.2.6 (inclusive); upgrade to 4.2.7 or greater (Enterprise Support Only). Spring Cloud Config 4.3.x: affected from 4.3.0 through 4.3.2 (inclusive); upgrade to 4.3.3 or greater. Spring Cloud Config 5.0.x: affected from 5.0.0 through 5.0.2 (inclusive); upgrade to 5.0.3 or greater. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: prevent infinite loops caused by the next valid being the same
When processing valid within the range [valid : pos), if valid cannot
be retrieved correctly, for example, if the retrieved valid value is
always the same, this can trigger a potential infinite loop, similar
to the hung problem reported by syzbot [1].
Adding a check for the valid value within the loop body, and terminating
the loop and returning -EINVAL if the value is the same as the current
value, can prevent this.
[1]
INFO: task syz.4.21:6056 blocked for more than 143 seconds.
Call Trace:
rwbase_write_lock+0x14f/0x750 kernel/locking/rwbase_rt.c:244
inode_lock include/linux/fs.h:1027 [inline]
ntfs_file_write_iter+0xe6/0x870 fs/ntfs3/file.c:1284 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vkms: Convert to DRM's vblank timer
Replace vkms' vblank timer with the DRM implementation. The DRM
code is identical in concept, but differs in implementation.
Vblank timers are covered in vblank helpers and initializer macros,
so remove the corresponding hrtimer in struct vkms_output. The
vblank timer calls vkms' custom timeout code via handle_vblank_timeout
in struct drm_crtc_helper_funcs. |
| Improper input validation in Samsung Members prior to version 5.8.01.5 allows local attackers to access arbitrary URL and launch arbitrary activity with Samsung Members privilege. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Zero-extend signed ALU32 div/mod results
ALU32 operations write a 32-bit result and leave the upper 32 bits of
the BPF register zero. The LoongArch JIT sign-extends the result of
signed ALU32 BPF_DIV and BPF_MOD (off=1), so a negative 32-bit quotient
or remainder leaves bits 63:32 set in JITted code while the verifier
and interpreter model those bits as zero.
Keep sign-extension on the operands, which signed divide needs, and
zero-extend the ALU32 result after the divide or modulo instruction,
matching the unsigned ALU32 div/mod paths and every other ALU32
operation in this JIT. |
| Budibase versions before 3.40.0 contain an authorization/authentication bypass in the PUT /api/global/users/tenant/owner (changeTenantOwnerEmail) endpoint. On self-hosted instances (SELF_HOSTED or DISABLE_ACCOUNT_PORTAL set), the cloudRestricted middleware is a no-op and the route is protected only by a general authentication check, so any authenticated user — including a lowest-privilege BASIC app user — can reassign the tenant account-holder (top-privilege admin) email to an attacker-controlled address. The attacker can then use the public password-reset flow to take over the admin account, leading to full administrative access. |
| Perl versions from 5.9.4 before 5.41.9 produce incorrect regular expression match results when a stale failure flag ends the Aho-Corasick prescan early in S_find_byclass.
The prescan walks the subject for positions where the full pattern could match, and the engine tries it from the leftmost one recorded. A failing transition sets the failed flag, and a later successful transition does not clear it, so the prescan reads the stale flag as a failure and stops before it can record a candidate that starts earlier. It takes a subject where one candidate is recorded and a later character then forces a fallback through a fail link that succeeds.
Example:
"ABCDE" =~ m/ABCF|BCDE|C/; # matches C at offset 2, not BCDE
"ABCDE" =~ m/ABCF|BCDE|C(G)/; # no match, BCDE missed
An alternation like this can miss input it should match, or match it on the wrong branch, so an access or filtering decision made from the result can be wrong. |
| CPSD CryptoPro Secure Disk for Bitlocker before v7.7.4 fails to enforce IMA policy protections across temporary file systems, allowing for unsigned code to be executed from these locations. |
| Backstage is an open framework for building developer portals. Prior to 0.29.2, the experimental dynamic client registration and client ID metadata document features in the @backstage/plugin-auth-backend use full-string matcher.isMatch glob matching for auth.experimentalDynamicClientRegistration.allowedRedirectUriPatterns and the auth.experimentalClientIdMetadataDocuments allowedClientIdPatterns and allowedRedirectUriPatterns options. A hostname wildcard can match across URL component boundaries, allowing an attacker-controlled redirect URI with a trusted hostname suffix in its path to pass the allowlist and receive an OAuth authorization code after a victim completes the flow. Patterns without an explicit protocol can match unintended protocols, and redirect URIs containing embedded credentials are accepted after user information is stripped for matching. The features are experimental and disabled by default; only deployments that enable them and configure custom wildcard-hostname or protocol-less patterns are affected. This issue is first fixed in prerelease version 0.29.2. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.11, the JSON utility parser in org.hl7.fhir.utilities.json.parser.JsonParser enforces no maximum nesting depth for arrays or objects. As a result, a small but deeply nested, syntactically valid FHIR JSON document can trigger unbounded readArray() or readObject() recursion, raising a StackOverflowError before structural validation runs. An attacker who can submit JSON resources for validation can thus crash the request thread, and services that do not isolate StackOverflowError safely may experience worker loss or process instability — a denial-of-service condition. This issue is fixed in version 6.9.11. |
| A flaw has been found in macrozheng mall 0504e86. This vulnerability affects unknown code of the file /sso/getAuthCode of the component mall-portal Module. Executing a manipulation can lead to weak password recovery. The attack may be launched remotely. This attack is characterized by high complexity. It is stated that the exploitability is difficult. The exploit has been published and may be used. The vendor deleted the GitHub issue for this vulnerability without any explanation. Afterwards the vendor was contacted early about this disclosure via email but did not respond in any way. |
| A SQL query validation bypass in the Flint extension query handler in the OpenSearch SQL plugin allows a remote authenticated actor with async query access to execute arbitrary code on Apache Spark workers by sending a crafted SQL query to the direct query endpoint. |
